Used Pvd Sputter Coating System for sale (41,516)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, clear span: 995 mm, total length: 9,535 mm, total height: 4,500 mm, load capacity per storage section: 50 kg, hole spacing: 25 mm, shelf height: 4,500 mm, Technical specifications of the shelving: - Manufacturer: Mecalux GmbH - System type: M3 picking shelving as an aisle system - Overall height: 4,500 mm (1 shelving unit with a height of 4,150 mm) - Load levels: 12 (including the base) - Shelf load: 50 kg per shelf - Aisle level at a height of 2,150 mm, load-bearing capacity 350 kg/m², floor made of 38 mm chipboard - Access staircase: 11 steps, 1,000 mm wide - Uprights galvanized, shelves cathodically dip-coated (RAL 5003 sapphire blue) - Shelf dividers: Each level has 1 Sendzimir-galvanized shelf divider. Condition: Professionally operated, well-maintained storage system, fully functional and in good overall condition. Important: Ledpfxjzzalye Abzsag Dismantling and removal are the responsibility of the buyer. Technical documentation and support for scheduling will be provided.

Year of construction: 1992, condition: good (used), Offline coating system with 2 coating and drying stations. Profiling, moisture measurement via electrical IR or impact (Voith). Characteristics: * Capacity: max ~ 184,000 tons/year * Width: 4800 mm * Speed: up to 1,400 m/min Laodpjzdn H Dofx Abzsg * Diameter of jumbo roll: max. 2600 mm * Coating weight: 6–14 g/m² (per side) * QCS system: Lippke | Honeywell * DCS system: Siemens | Teleperm

Condition: good (used), Year of construction: 1994, space requirement width: 500,750 mm, Coating pan GLATT Type Coater GC 750/500 from 1994 with interchangeable drum, explosion-proof design. Process Equipment: Glatt Coater GC 750 (equipment only used for test runs) Perforated drum with D = 500mm drum and 750 mm drum, with: Inlet and outlet air ducts for both drums Capacity of 750 drum: 50 – 75 kg/batch Capacity of 500mm drum: 15-45 kg/batch Discharging must be done manually Spraying arm with nozzle adapter Spraying system with 1 Schlick nozzle Control cabinet (pneumatic/electrical) with Siemens PLC S5 Air handling unit 7AIR including: With inlet air fan F7 and H12 filtration Preheating Dehumidification Heating Ljdpfxezmvqio Abzeag Deduster HERDING Outlet air fan WIP nozzle inside drum and external nozzle

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Ljdpfjyc H I Ssx Abzeag Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 700 kg, temperature: 220 °C, heating capacity: 150 kW (203.94 HP), workpiece height (max.): 2,500 mm, workpiece length (max.): 6,000 mm, Equipment: lighting, Complete powder coating system including pre-treatment, curing oven, conveying system, and assembly For sale is a powerful, well-designed, and fully coordinated complete powder coating system for highly professional coating processes. The system covers the entire manufacturing process – from thorough surface preparation (3 zones) to precise powder application and reliable thermal curing. (Note: A customized design of the system according to customer requirements is possible upon request!) Key data & technical specifications: - Machine type: Powder coating system / complete system - Condition: New machine - System components: - Combined booth for manual/automatic pre-treatment - Walk-in powder coating booth - Powder curing oven - Manual conveying system - Powder gun - Electrical control system including installation - Usable dimensions (oven / booths): Component dimensions up to L x W x H: approx. 6,000 x 1,500 x 2,000 mm - Oven power / connection value: Design depending on the type of heating (gas / electric) and dimensioning (e.g. approx. 80–150 kW electric or a correspondingly designed gas burner) - Scope of supply: Complete system including on-site assembly Detailed overview of the included system components: 1. Combined pre-treatment booth: - Designed for both manual and automatic pre-treatment steps. Ensures optimal cleaning, degreasing, and application of a primer to the workpieces as a basis for durable coating results. 2. Walk-in powder coating booth: - Ergonomically designed, walk-in booth structure for maximum freedom of movement during coating. Enables efficient powder recovery, quick color changes, and a clean working environment. 3. High-performance powder curing oven: - Uniform heat distribution for homogeneous curing of the powder coatings. Designed for high energy efficiency and stable process temperatures. 4. Manual conveying system: - Robust and flexibly usable transport system for the safe flow of materials between pre-treatment, coating, and curing oven. 5. Ergonomic powder gun: - Modern application technology for uniform powder application, high transfer rates, and first-class surface quality. 6. Central control & electrical system: - Complete electrical control system including wiring, control cabinet, and complete on-site installation, ready for operation. Flexibility & Customization Laodpfx Aobhh Awebzog Every manufacturing operation has specific requirements for space, component sizes, and throughput. All components and dimensions of this system can be flexibly adapted to your individual operational conditions and customer requirements. Please do not hesitate to contact us to discuss special dimensions, modified conveying systems, or extended levels of automation.

Condition: new, Year of construction: 2027, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET * OVERHEAD CONVEYOR AND LOAD TROLLEYS Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included Lsdjvv Rfdopfx Abzjag We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Lsdpfx Aszw Apgjbzjag Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Year of construction: 2026, operating hours: 20 h, condition: like new (used), functionality: fully functional, PE30 Commercial Chocolate Enrobing & Cooling Line – 30kg Tank – 2.7m Cooling Tunnel – Almost New We are selling our complete PE30 chocolate enrobing and cooling line following the closure of our recently launched protein bar production facility in London. The equipment was purchased new specifically for our own production and only went into operation around March 2026. Since then, approximately 25,000 chocolate-coated protein bars have passed through the line, so it has had relatively light commercial use and remains in excellent condition. The equipment is being sold solely due to the closure of our production facility for business and financial reasons – not because of any fault with the machinery. Complete system includes: PE30 chocolate melting & enrobing machine 30kg chocolate melting/holding tank Chocolate enrobing section with stainless-steel mesh conveyor Custom-made acrylic enclosure/cover for improved temperature stability around the chocolate 2.7m refrigerated cooling tunnel Food-grade PU cooling conveyor Copeland compressor External ventilation/extraction fan Associated components supplied with the system The custom acrylic cover was purchased separately and designed specifically for our machine to help maintain a more controlled temperature around the chocolate during enrobing. It is included in the sale. PE30 specifications Lodpszx D Dbsfx Abzoag Manufacturer: Anhui Dixin Machinery Technology Co., Ltd. Model: PE30 Capacity: 30kg Power: 220V / 1 Phase / 50Hz, 1.8kW Material: SUS304 stainless steel Working speed: 2m/min Mesh: 200 × 1000mm Belt: 200 × 1200mm Dimensions: approx. 1230 × 850 × 1450mm 2.7m cooling tunnel SUS304 stainless steel Food-grade PU belt 200mm × 2700mm belt 220V / 1 Phase / 50Hz 2.8kW Copeland 2HP compressor Temperature capability down to approx. -15°C Dimensions: approx. 2800 × 850 × 1380mm Weight: approx. 220kg These technical specifications are taken from the original manufacturer's documentation. The system also includes a ventilation fan intended to be installed/vented outside the production area. We used the line for premium chocolate-coated protein bars, but it can also be suitable for energy/nutrition bars, confectionery, biscuits, bakery products and other chocolate-coated products. The manufacturer also specifies the cooling tunnel for a range of food applications. The machine is currently located in Wimbledon, London, UK. Inspection can be arranged, and videos of the equipment operating can be provided to serious buyers. We are also selling other equipment from our protein bar production facility, including protein bar extrusion/forming machinery, chocolate processing equipment, flow-wrapping machines, mixers and stainless-steel production equipment. Machines can be purchased individually or as part of a complete protein/energy bar production line. Collection from Wimbledon, London. Buyer to arrange suitable transport and installation unless otherwise agreed.

Condition: new, Year of construction: 2027, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Ledovv H Hdjpfx Abzoag Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: AYA320NY3006, overall weight: 950 kg, total length: 1,700 mm, total width: 1,650 mm, total height: 2,120 mm, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of construction: 2007 Mains connection: 400V Lsdpjwm Htqsfx Abzjag Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 plates Oven Dimensions: 72 x 50 x 72cm Dimensions: 170 x 165 x 212 cm Weight: ~950 kg

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Lasdpfx Abewbqx Hezsg Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Laodpfezzlh Hox Abzsg Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 220 °C, heating capacity: 33 kW (44.87 HP), workpiece height (max.): 1,700 mm, workpiece length (max.): 1,700 mm, fuel: electricity, Compact Starter Package – Powder Coating System (Oven, Spray Booth & Wagner Hand System) For sale is a complete, immediately ready-to-use starter package for powder coating. The system is delivered fully assembled (installation and assembly are not required). On-site, only electrical and compressed air connections need to be provided. 💡 Tailored Solutions & Individual Customizations: Each package can be flexibly adapted to your specific requirements, workpiece sizes, and space conditions. Whether it’s modified oven dimensions, different extraction capacities, additional transport technology, or alternative coating systems – we precisely tailor the system technology to your needs! Package Components & Technical Data (Standard Version): 1. Electric Powder Curing Oven: - Usable dimensions (L x W x H): 2,000 x 1,900 x 2,000 [mm] (dimension adjustments possible upon request) - Thermal output: 33kW (electrically heated) - Max. temperature: 220°C - Recirculating air / Fan: 5,700 m³/h (2.2kW motor) - Equipment: 2 infeed rails for trolley systems, 2 swing doors, rock wool insulation (150mm), stainless steel thermal block AISI 316 2. Open Powder Spray Booth (mobile): - Dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Extraction capacity: 6,000 m³/h (3.0kW motor) - Filter: 4 filter cartridges + 1 absolute bag filter at the top Lodpjbqk Nbofx Abzeag - Equipment: - Mobile 60-liter powder container - Electromagnetic valves for cleaning 3. Wagner Hand-Held Powder Coating System “Sprint 2 B” - Application: Corona / Tribo hand coating - Powder output: max. 450 g/min - Processable materials: Organic, tribo, metallic, and acrylic powder coatings - Protection class: IP 64 4. Electrical Control / Control Cabinet Electronic temperature control and control of the entire system

Condition: new, Year of construction: 2027, functionality: fully functional, TRANSFER TYPE POWDER COATING LINES The transfer type conveyor consists of a combination of conveyor rails. The effective powder coating system layout is designed by our project department according to your workshop dimensions based on the products to be coated and daily quantities. Lajdpovv H Uusfx Abzsg Workpieces are loaded onto the bars which are moved manually or automatically to bring the products to the needed, booth or oven. The advantage of this system is that the products are loaded on the conveyor and do not tire the operator as they move on the conveyor until the end of the process, so it is an efficient system. The movement of the bars can be automated at any point in the system, making the entire conveyor line a cost-effective alternative to power&free conveyors. In the painting system, automatic coating can be achieved by adding a conveyor system above the powder or paint booth and adding a reciprocator and automatic gun to the coating booth. We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm Lajdpfxeunaqvo Abzeg - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm Laodpezzf Rujfx Abzeg - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Lsdov Ed Ukspfx Abzoag Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: new, Year of construction: 2027, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Lodpfx Abjvv Rfkjzoag Contact us for more information and quotations

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ Ledpfx Abjiivq Ujzeag ✅Contents of the system: ►1 unit - Gas-heated large powder coating oven ►1 unit - Automatic powder coating booth ►1 unit - Electrically heated small powder coating oven ►2 units - Room-type monocyclone manual powder coating booth ►6 units - Automatic powder coating gun ►3 units - Manual powder coating gun ►1 unit - Automatic powder recovery unit ►6 units - Monocyclone ►1 unit - Automatic control panel ►1 unit - Automatic rod movement system, speed-controlled ►2 units - Movable platform, speed-controlled ►8 units - Parking station ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Rods for hanging Our system is located at Anhaltstr. 30, 14943 Luckenwalde. You can schedule an appointment to view the machines. The system has been in operation for 10 years. Since we are the direct manufacturer of the system, we can make any desired modifications to the machines by mutual agreement. Does it not fit into your existing assembly area? Then we can make changes to the layout. Please check the PDF file of the system using the link below.

Condition: used, functionality: fully functional, This used STOW pallet rack is a compact, high-performance heavy-duty racking system designed for industrial storage requirements. The modular high-bay rack is ideally suited for logistics, industry, large warehouses, and freight forwarding operations. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 690 cm - Depth: approx. 110 cm - Length: approx. 5040 cm - Shelf load: 2,250 kg Lodszz If Ujpfx Abzjag - Beams: approx. 270 x 12 x 5 cm PNB0472 - Beam colour: yellow, powder-coated - Uprights: approx. 690 x 110 cm, pre-assembled - Upright colour: blue, powder-coated - Levels: floor + 3 - Pallet spaces: 216 including floor-level positions - Version: Used STOW SCOPE OF DELIVERY: - 019 x uprights (approx. 690 x 110 cm), pre-assembled - 108 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 216 x safety pins Price: €5,700.00 net €6,783.00 gross You will receive an invoice showing VAT. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs vary by postal code - Professional assembly and disassembly by trained teams optionally available - Racking inspections in accordance with DIN EN 15635 carried out by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quote tailored to your specific requirements. Whether you're planning a new build, conversion, or extension, we offer expert advice to help you configure your racking system. SHOWROOM: Visit us in our showroom! Experience our pallet racks, warehouse shelving, and other solutions firsthand. Many systems are assembled and available for direct viewing. Our specialist advisors are available for questions and individual consultation—we look forward to your visit! Not found the right solution yet? Visit our website for a quick overview of numerous offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily via message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, from 8:00 a.m. to 4:00 p.m. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Dust control/high-pressure misting system 2 misting cannons, each with 30 nozzles Separate container with central unit, electrical system, IBC water tank, and high-pressure line. Lajdsz A Tclopfx Abzsg

Condition: excellent (used), Year of construction: 2013, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 377237, Size 74 x 106 cm, CX package for board up to 1.2 mm, Wallscreen, Divetronic, Ergotronic, Qualitronic color control, SIS infeed system, Optical sheet control, FAPC plate change, Varidamp dampening, Blanket wash, Roller wash, Impression cylinder wash, Technotrans High Tech combi Beta.C, Beta F filtering unit, Chamber coater Harris&Bruno for conventional coating, Vary IR/TL dryer in delivery, ALV 3 delivery, Grafix Megatronic powder spray, Logistic system, Machine is elevated by 675mm. Lasdpozxf H Rsfx Abzjg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Laedpfozxggljx Abzsg Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Year of construction: 2012, condition: used, film width: 450 mm, roll width: 500 mm, machine/vehicle number: BA-18609, Equipment: CE marking, Coating Line Used for coating of battery electrodes - Roll width 500 mm - max. Web width 450 mm - max. Coating width 400 mm - Web speed 0.1-5 m/min - Various substrate films such as copper, aluminium, PET and PES Laodpfx Abjzzpqrszog - Doctor blade & slot die coating - Web guide system - Corona pre-treatment - integrated x-Ray areal weight measurement - 1x infrared oven - 2x convection oven Length coater: 14 m The buyer is responsible for the proper disassembly and pickup of the machinery.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Ledpozyc Diefx Abzeag Details available upon request.