Used Plug Socket for sale (5,673)

Condition: new, maximum load weight: 36,040 kg, overall weight: 53,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm * Gooseneck hydraulically raisable/lowerable and extendable * For tractor unit: 6 x 4 or 8 x 4 Low-bed: * Low-bed with external beams in an extendable SUPER LOW design, length approx. 8,000 mm * Low-bed with a fixed hardwood floor approx. 40 mm thick and mechanical locking system * The supply lines are protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screw-on RUD rings Rear chassis: * Rear chassis with closed outer frame and diamond plate cover * Chassis with excavator bucket, which is closed in the rear half to accommodate the air tanks * 3 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 1 pair of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally, at the front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires: * Tires 245/70 R 17.5 3PMSF - at the manufacturer's choice. Load index (146/146F) Bdedpfxsy Uwu Is Amyof Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paint: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Topcoat with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanized connection strip at the front * Trailer steering, operable from the front and rear via cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) * Preparation for mounting screw-on container positioning for 1 x 20', 1 x 40' or 1 x 45' containers on the outer beams. Without container locking mechanisms * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings * Electro-hydraulic unit * Spiral cable for supplying the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with plug connection (NATO-NATO) * Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the semi-trailer * On the gooseneck and at the rear, left and right, one bracket each for the warning signs, including a socket * Manual and description on a USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pumps * 7 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD VLBG-4 rings * 2nd driving height, approx. 50 mm above the normal driving position, by means of manual operation * On the gooseneck, plug-in aluminum side panels and rear panel, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in frames are removable (length of the superstructure

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Mini Cube Nero 1.0 from Villex Container GmbH is a versatile 4.0-meter container that combines a compact footprint with a surprisingly spacious interior. Measuring 4.0 m in length, 2.4 m in width, and 2.6 m in height, this model offers more space than smaller alternatives while remaining easy to transport. Its 5 cm thick insulation ensures effective thermal protection, while the anthracite-colored panels and base frame (RAL7016) provide a modern and stylish look. The container is equipped with a robust steel door and a standard window (1000 x 1000 mm) for ample natural light. Electrical fittings include a 32A CEE plug, three double power sockets, two LED lights, and a light switch. Weighing just 800 kg, the Villex Mini Cube Nero 1.0 is lightweight, highly portable, and suitable for a wide range of applications. Bsdpfx Amsy H Huzeysdf Article number: MINCN1.0 Version: 4.0 m container Length: 4.0 m Width: 2.4 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 800 kg Doors: 1 steel door Windows: 1 standard window (1000 x 1000 mm) Electrics: 32A CEE plug, red; 3 double sockets; 2 LED lights & 1 light switch

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,500 mm, loading space length: 6,000 mm, loading space height: 2,550 mm, Equipment: lighting, The Villex X-Series Black Short 1.0 from Villex Container GmbH is a premium 6.0-meter office container distinguished by its well thought-out features and modern design. Measuring 6.00 m in length, 2.50 m in width, and 2.55 m in height, it offers a versatile usable area of approximately 15 m² – perfectly suited as a mobile office, meeting room, or temporary workstation. Its robust construction with 75 mm thick sandwich panels provides excellent thermal insulation, making the container suitable for year-round use, even under extreme weather conditions. The sophisticated combination of anthracite panels (RAL 7016) and a deep black base frame (RAL 9005) give the container an elegant, striking appearance. Two large aluminium windows (1000 x 1000 mm) with integrated fly screens ensure plenty of light and air, providing not only natural daylight but also effective insect protection. A sturdy steel door (RAL 9005) guarantees security and durability in everyday use. In terms of electrical equipment, the Villex X-Series is fully outfitted: with a 32 A CEE heavy-duty power connection, five power sockets, two LED lights and one light switch, the container is immediately ready for use – whether for technical equipment, workspace lighting, or IT infrastructure. Despite its solid build, the container weighs only 1,500 kg, making it flexible and easy to transport. Article number: XSERS1.0 Variant: 6.0 m container Length: 6.0 m Width: 2.50 m Bedpfxey H Em Ns Amyjdf Height: 2.55 m Insulation thickness: 7.5 cm Panel colour: RAL7016 (anthracite) Base frame colour: RAL 9005 (black) Weight: 1500 kg Doors: 1x door (steel) Windows: 2x windows with fly screens (1000 x 1000 mm) Electrics: 5 power sockets, 2x LED, 32A CEE plug & 1x light switch

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 5,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Medium Sales Container Cube Nero 1.0 from the Nero-LINE series is a compact and functional sales unit, measuring 5.0 meters in length, 3.0 meters in width and 2.6 meters in height. Its robust construction and modern design in RAL7016 (anthracite) provide a sophisticated appearance, while the 5.0 cm thick insulation ensures efficient thermal performance. The container is equipped with a sturdy steel door insulated with mineral wool and a large sales window (4000 mm x 1200 mm) including roller shutters, making it ideal for mobile retail or food service applications. Electrical equipment features a 32A CEE power connector (red), three double power sockets, two LED lights, and a light switch—ensuring the sales area is well-lit and ready for use. A sales counter is included in delivery and supplied separately; installation is to be carried out by the customer on site, as a permanently installed counter would require a special permit for crane-truck transport. With a weight of 1,100 kg, the container is both stable and versatile—perfect for events, markets, or stationary sales. Individual customization is available upon request. Item number: MEDVKCN1.0 Area: 15 m² Variant: 5.0 m container Bdjdpoy Hrm Asfx Amysf Length: 5.0 m Width: 3.0 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 1,100 kg Doors: 1x door (steel) Windows: 1x sales window incl. roller shutters (4000 mm x 1200 mm) Electrics: 32A CEE plug (red), 3x double sockets, 2x LED lights & 1x light switch Equipment: 1x sales counter (counter supplied loose and to be assembled by customer)

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 600 kg, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 2,600 mm, Equipment: lighting, Turnkey assembled, in stock & available for immediate delivery Dimensions: Length: 3.0 m Width: 2.4 m Height: 2.6 m External area: 7.2 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Wood cladding: RAL 7016 Weight: 600 kg Door: 1x PVC glass door, double glazed Windows: none Electrical installation: In accordance with VDE standard 3-phase, 32A CEE plug (red) 2x double sockets Lighting: 1x lamp 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (for an extra charge): Double-wing doors: For wider access and greater transport options. Bedpfsy Egt Iex Amyodf Additional doors: Flexible access points. Additional windows: Increased ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting conditions. Roller shutters: Privacy and sun protection for adjustable light control. Glass façade: Bright appearance with fully glazed front. Woodstyle façade: Timber-look finish for a warm and aesthetic appearance. Divided rooms: Flexible usage options thanks to additional room separation. WC: Integrated sanitary facility for greater comfort. Shower: Addition to sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm or 120 mm. Forklift pockets: For easier transport with forklifts. ----- Delivery: Nationwide delivery with crane vehicles available. To calculate a delivery price, please provide your postal code. Delivery time: 1-4 weeks, depending on distance and availability (standard containers or custom builds).

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Big Cube Block Line Black 2.0 by Villex Container GmbH is a modern 6.0-meter office container featuring the BLOCK-LINE design, known for its robust construction and versatile applications. With a length of 6.0 m, width of 3.0 m, and height of 2.6 m, it offers generous space for a wide range of uses. The 5 cm thick insulation ensures effective thermal management, keeping the interior comfortably tempered. Anthracite-colored panels (RAL7016) and the base frame give the container a contemporary and stylish appearance. The container is equipped with a double-glazed glass door and two floor-to-ceiling windows (1000 x 2000 mm), which allow for abundant natural light and create a bright working environment. The electrical fit-out includes a 32A CEE plug (red), three double power sockets, two LED lights, and one light switch. Weighing 1,000 kg, the Villex Big Cube Block Line Black 2.0 remains easily transportable while providing a high-quality, functional solution for modern office or workspaces. Item number: BCBLB2.0 Version: 6.0 m container Length: 6.0 m Width: 3.0 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 1,000 kg Doors: 1 x door (glass) Windows: 1 x floor-to-ceiling window (1000 x 2000 mm) & 2 x glass elements Electrical equipment: 32A CEE plug, red; 3 x double sockets, 2 x LED lights & 1 x light switch Includes air conditioning for heating & cooling We manufacture your container individually to your specifications! Optional features available at extra cost: • Custom dimensions, e.g. 9x3 m, 4x2.4 m, double container, triple unit, and more • Various window sizes • Different colors • Floor colors • Practical forklift pockets • Lamp • Roller shutters • Heating • WC, shower, toilet, washbasin Bjdpfjy Hkvpsx Amysdf • Kitchen • Plastered interior walls • And much more Delivery is usually made with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. Delivery time for in-stock standard containers nationwide is approx. 1–2 weeks after order receipt, depending on postal code region. We manufacture and deliver custom containers within 1–4 weeks. Collection and inspection at Villex Container GmbH, Dortmunder Str. 90, 59427 Unna can be arranged by appointment during business hours by prior telephone arrangement.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Ready for immediate delivery, turnkey and in stock Dimensions: Length: 6.0 m Width: 3.0 m Height: 2.6 m External area: 18.0 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Block Line cladding 3.0: RAL 7016 Weight: 1,300 kg Door: 1x PVC glass door, double-glazed Windows: 2x floor-to-ceiling, vertical PVC windows (100 x 200 cm), double-glazed, tilt-and-turn function Electrical installation: According to VDE standard 3-phase, 32A CEE plug (red) 3x double power sockets Lighting: 2x lamps 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (at extra charge): Double-leaf doors: For wider access and improved transport options. Additional doors: Flexible access options. Additional windows: Enhanced ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting. Roller shutters: Privacy and sun protection for light and visibility control. Glass façade: Bright ambience thanks to fully glazed front. Woodstyle façade: Wooden finish for a warm, aesthetic appearance. Separate rooms: Flexible use of space through additional room partitions. WC: Integrated sanitary unit for greater comfort. Shower: Addition to the sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm, or 120 mm. Forklift pockets: Easier handling with forklifts. ----- Delivery: Bodpfx Asy Hkbxjmysdf Nationwide delivery possible with crane vehicles. To calculate the delivery price, please provide your postal code. Delivery time: 1–4 weeks, depending on distance and availability (standard container or custom-built).

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Containers shown in the images are in stock and immediately available. Inspection and collection possible. This offer includes Villex Big Cube Long Doppio Nero 1.0 containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, and construction site containers. Dimensions: 6 x 3.0 x 2.6 m Delivery: Nationwide delivery possible Standard features: Nlobsy Hgv Eetb Txx Rsa Condition: New & Assembled Exterior color: RAL 7016 (Black/Anthracite) Interior color: Walls -> White, Floor -> Wood look blue & grey (dark) Exterior walls: 50 mm thick Area: 18.00 m² Weight: 1300 kg 1x door (steel) 2x double windows (2000 x 1000 mm) Electrical: 32A CEE plug, red. 3x double power sockets, 2x LED lights & 1x light switch We manufacture your container completely according to your individual needs! Optional extras available for a surcharge: Custom dimension, e.g. 7 x 3 m, 4 x 2.4 m, double containers, triple units, and much more - Various window sizes - Various colors - Floor color options - Practical forklift slots - Air conditioning - Lamps - Roller shutters - Heating - WC, shower, toilet, washbasin - Kitchen - Plastered interior walls - And much more Bsdpjy Hidrofx Amyjdf Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. The delivery time for standard containers in stock is approximately 1-2 weeks nationwide after receipt of order, depending on the postal code area. We manufacture and deliver custom containers within 1-4 weeks.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Containers in the picture are in stock and immediately available. Inspection and pickup are possible. In this offer, we provide you with Villex Big Wood Pavilion 3.0 containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or construction site containers. Dimensions: 6 x 3.0 x 2.6 m Delivery: Available nationwide Standard features: Condition: New & Assembled Exterior color: RAL 7016 (Black/Anthracite) Interior color: Walls -> White, Floor -> Wood-look Blue & Dark Gray Exterior walls: 50 mm thick Area: 18.00 m² Weight: 1000 kg 1x door (glass) + 2 glass elements 1x floor-to-ceiling window (1000 x 2000 mm) Electrics: 32A CEE plug, red. 3x double socket, 2x LED lighting & 1x light switch We manufacture your container entirely to your specifications! Optional extras for a surcharge: Custom dimensions, e.g., 7x3 m, 4x2.4 m, double containers, triple unit systems, and more Various window sizes, various colors, different floor colors, practical forklift pockets, air conditioning, lamps, roller shutters, heating, WC, shower, toilet, washbasin, kitchenette, plastered interior walls, and much more. Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver or conveniently in advance by PayPal or bank transfer. The delivery time for standard containers in stock is approximately 1–2 weeks nationwide following receipt of order, depending on postal code area. Custom containers are manufactured and delivered within 1–4 weeks. Bdodpsy Hgw Nofx Amyjf

Year of construction: 2025, condition: as good as new (ex-display), Our mobile winder, is one of our demonstration machines, condition good, slight scratches on the housing and on the chassis, Warranty 12 months, completely checked and serviced. On request with optional accessories such as a wide feeler strap. Warranty: 12 months (single-shift operation), The advantages at a glance: - Working area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Compared to its competitors, it takes up to 40% less space - Easiest handling - German support - Upgrades are also optionally available later The LEO only needs 75cm (about a shoulder width) around the pallet to be wrapped. WORKSPACE Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / without limit Width: min. 600 mm / without limit Machine dimension: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally also lower possible) FILM DATA Wrapping programs: - Foot and head wrapping - Cross and one-way winding - with stop for cover sheet support Film width max. 500 mm Core diameter max. 76 mm Outside diameter max. 220 mm MACHINE DATA Tension: - Battery: 2x 12 volts - Charger integrated 220 volts - Drive: 2x 24 volts - Foil slide: 1x 24 volts Foil carriage: - own parameters for up and down movement - Mechanical film brake - stepless adjustment Control: - Touch panel with digital display - Speed dial buttons - Drawbar with navigation buttons - Pallet detection via tactile belt - Emergency switch - 6 storable working modes - Double collision protection Mast: Stationary construction Weight: 195 kg CE marked machine the wrapping of black products or the use of black stretch film. and can be charged with any cable with a Euro mains plug at a 230V household socket. Such a charging cable is of course part of the scope of delivery. Bdedpfxehfc Ris Amyof

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch Bedpfofnvwqjx Amyodf - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) Bedpjfnvviefx Amysdf - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Year of construction: 2023, condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) - Sizes: 2.0x2.0x4.2 meters - Mass≈2000 kilograms - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes Bsdpfxeiy Dl Hj Amyodf - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings Bedey Auh Ijpfx Amyedf * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Bdedpfsy Auhzex Amyjf Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 37,980 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor covering approx. 30 mm thick Loading platform (extendable version): * Loading platform in extendable version with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings installed flat at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood floor covering approx. 48 mm thick, checker plate over the axles Landing legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tires: * Tires 235/75 R 17.5 3PMSF – brand of our choice TPMS: * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardized EBS interface in accordance with ISO 11992. For correct display, the towing vehicle must be able to receive and show this data. Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tools Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Painting: * Entire steel structure is automatically shot blasted by blast wheel system after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Coating tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3) Bdsdpfx Aoy Aufmsmyjf * All LED side marker lamps flash with the indicator * ASPÖCK-UNIBOX on the front junction strip with 24N, 24S & 15-pin sockets, connection as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the headboard * Yellow-red air couplings on the galvanized front junction strip * 4 wheel chocks with holder at the headboard * Mounting at the rear of the gooseneck for ALU access ramps * Galvanized folding supports under the loading platform chamfer * Gooseneck and rear panel each with a bracket for warning signs including socket left and right * Axle load gauge including load diagram * On the gooseneck, plug-in aluminum side panels and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 3 pairs of WADER C

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: Bdsdpeyz E T Sefx Amyef * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: used, gebraucht 2468D prompt, Zwischenverkauf v Deutschland 2970 € 1 1890 € 195 kg 28 mm DEMO SET / MINT CONDITION consisting of: * 1x accessories car (Delivery is galvanised) * 4x angle stop 350 x 20 mm * 4x adjustable angle stop 250 x 20 mm * 15x Adjustment clamp * 4x Multi-clamp * 6x Stand angle, adjustable 175 x 20 mm * 2x Stand angle, adjustable 225 x 21 mm * 8x Stop rail 225 x 20 mm * 10x Socket bolt * 15x Plug holder * 3x Ball Tension Bolt * 4x Claw clamping bolt 28 x 100 mm Bedpfx Aeyq Spqjmyodf * 15x Spacer ring

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle Bedpfx Amji E Izvsysdf 120 amps, 100% duty cycle Adjustment range: stepless Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters - HF ignition - Shielding gas pressure regulator - Electrode welding for coated electrodes - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Bdsdpfx Amovg Rh Toyjf Weight (without cable) 23 kg New, unused

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate Bsdpfx Ameyvnfgsyjdf * 2 pairs of ferry-

Condition: used, maximum load weight: 44,420 kg, overall weight: 53,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 11,500 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Cargo Area: * Cargo deck with approximately 30 mm thick hardwood floor * 9 pairs of folding lashing rings (LC 10,000 daN) * 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes Landing Legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data. Axles and Suspension: * BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable * Air suspension with raise and lower valve Braking System: * WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Electrical System: * Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically blast-cleaned after welding using a shot-blasting system * Second blast cleaning with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Rims painted silver-grey * Paint system tested by salt spray test to ISO 9227-NSS * Sealant wax applied to cavities Included Accessories: * Cargo deck with approx. 30 mm thick hardwood floor * 2” kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * At galvanized front connection bar: DUOMATIC air couplings * Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear * At gooseneck and rear plate, left and right, each with a holder for warning plates including socket * White reflective tape according to EU regulations on sides and red at the rear * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck * European reflective markers (red/yellow) on trailer rear * Bracket for rotating beacon at the rear of trailer * Mudflap at the rear of trailer * Manual and documentation on USB stick * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard * 4 wheel chocks with holder at front wall * Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit) Bjdpfxeyu Eu Io Amyjdf * Electro-hydraulic power pack * 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes * One INOX toolbox, approx. 1,200 x 460 x 55

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish Bodpfxjxarmas Amysdf * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: used, Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50 Measuring probe for measuring machine Serial: 77501 - A Probe holder Probe body TP20 for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Probe mounting M8 thread Head mounting with MS shaft Ø 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180° socket - 5 M8 threaded connections for probes (4 blanking plugs) total weight 280g used in good condition Bdsdpfxornagpo Amyjf

Condition: new, Year of construction: 2024, 3x SCHORR low lift pallet truck fully electric 1500kg load capacity 1500kg load capacity 24V 65Ah AGM batteries Fully electric & self-propelled Ideal for trucks Support wheels included Charger integrated SCHORR electric pallet truck with 1500 kg load capacity and maintenance-free AGM batteries. The SCHORR electric pallet truck is the perfect solution to make your warehouse logistics faster and more efficient. With a load capacity of 1500 kg and an all-electric drive, it effortlessly handles the heaviest transportation tasks. This saves time and energy and increases the productivity of your employees. The built-in 65 Ah batteries are completely maintenance-free and more resilient than the lighter lithium-ion batteries. A stable and constant power output from the batteries is particularly important for pallet trucks. The charger for the batteries is permanently installed in the machine so that you can simply drive to the 230V socket - without having to carry a separate charger. Bdjdpfet Eb Htsx Amyjf POWERFUL DRIVE FOR EVERY SITUATION The completely maintenance-free 24V batteries with a capacity of 65 Ah provide enough power for the pallet truck. Particularly practical: thanks to the integrated charger, charging the battery is child's play. Simply drive to the socket, pull out the cable, plug it in and you're done! The weight of the AGM battery also ensures a lower center of gravity and thus significantly improves handling. ROBUST AND HIGH-QUALITY CONSTRUCTION The RR15NHE3 impresses with its robust design, with which it is up to any task - whether in the warehouse, retail or in a truck. The support wheels fitted as standard also help here, allowing you to move your goods safely and stably. The pallet truck is made of solid steel all round, which makes it particularly robust and durable. HIGH-QUALITY MATERIALS The wheels of the RR15NHE3 are made of abrasion-resistant and non-staining polyurethane. The forks are fitted with tandem load rollers and the drive wheel is stabilized by lateral support wheels. THE USUAL HIGH LEVEL OF SAFETY AND OPERATION The ergonomically designed tiller head of the RR15NHE3 makes it easy to operate, both for experienced users and newcomers. The pallet truck is equipped with important safety functions such as an emergency brake belly button, an emergency stop button and an auger mode for sensitive loads or narrow working areas. Convince yourself of the quality of the all-electric low lift pallet truck and order it today. Technical data: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR15NHE3 Load capacity: 1500kg AGM battery (24V 65Ah) Length: 1604mm Width: 685mm Height: 82mm Fork length: 1150mm Tires: Polyurethane Tare weight incl. battery: 145kg Scope of delivery: 3x SCHORR RR15NHE3 electric pallet truck with support wheels Whether you want to have the pallet truck delivered or pick it up from us on site, we have the right solution for everything. Please feel free to contact us. Would you prefer to finance or lease the equipment? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! Our competent team will be happy to answer any questions you may have about the SCHORR 1500 kg electric low lift pallet truck. We look forward to hearing from you and assisting you with advice.