Used Pecon Cip Chip for sale (5,307)

Condition: excellent (used), functionality: fully functional, first registration: 10/2025, fuel type: diesel, color: orange, fuel: diesel, operating hours: 255 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C55SC DEMO UNIT with the following features: Work Package 1 Hjdpfozd Dzdex Af Seu Front linkage, 3D, double-acting incl. safety hook CAT II / CAT I Top link slider and top link with passive tilt adjustment and vibration damping (accumulator) for front-mounted implements Active hydraulic tilt adjustment for tilt adjustment Electro-hydraulic implement relief Rest bracket required for drawbar, rear linkage Electro-hydraulic implement relief Rest bracket PTO shaft, mechanical, front 1000 rpm Flow control valve 1 Flow control valve, circuit 1, adjustable from 0-35 l/min Implement adjustment pump variable, line set to the front and rear return and leak oil line to the front and rear Hydraulic kit 2 - 1 multi-function joystick (large joystick) incl. direction switch and speed control - 3 double-acting control valves, 2 with floating position - 6 front quick couplings - 2 rear quick couplings, looped, connected to the front quick couplings via a T-piece Tire 31x13.5-15 Wide-track fender kit Comfort Package Air conditioning, driver's seat with air suspension incl. seat heating, left armrest WORK LIGHTS, FRONT Cabin, center-mounted Overall height reduced by 40 mm Hydraulic tilting device 7-pin socket, front for implement lighting Reinforced wheel load equalization Manual central lubrication system Hydraulic tilting device for superstructure frame, incl. control valve Heated exterior mirrors with bracket + switch Hydraulic oil level warning system Work lights, rear Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift Hodpfx Aszd Riusf Seu TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Hsdpfx Afjzfbu Rs Sou Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: C6905, Maximum material passage: 1000x600 mm Capacity: 180-220 m³/h Knives: 4 pcs Drum diameter: 1000 mm Feeding conveyor: 5000 mm The PTH 1000/1000 E chippers are industrial, stationary machines equipped with an electric motor, primarily used in biomass plants, wood pellet and briquette production facilities, sawmills, and wood chipping sites. Hjdey D S R Aopfx Af Ssu These chippers are capable of processing large volumes of logs (of any kind), as well as trimmings, offcuts, and sawmill waste in a short time, producing up to 200 cubic meters per hour of high-quality, homogeneously-sized wood chips. The chipper drum’s diameter (1000 mm) and the feeding opening’s width (1000 mm) allow the machine to process logs with a diameter of up to 450 mm. The clean cut provided by the knives and the high inertia of the drum reduce strain and stress on the electric motor, confirming the renowned production capacity and robustness of Pezzolato’s drum chippers.

Condition: used, Year of construction: 2002, functionality: fully functional, – German-made – Year of manufacture: 2002 TECHNICAL SPECIFICATIONS: Hedpfxow Ip R Ts Af Seu – Feed opening (length / width): 1000 / 800 mm – Rotor diameter: 200 mm – Rotor length: 800 mm – Main motor: 11 kW – Hydraulic pump motor: 1.1 kW – Number of knives: 19 pcs – Reversible cutting knives: 40 mm x 40 mm, serrated – Screen: Ø 20 and 25 mm – AUTOREVERSE – HYDRAULIC DRAWER – Clamp drawer height: 140 mm – Extraction outlet diameter: Ø 200 mm – Dimensions (L/W/H): 230 / 160 / 215 cm – Weight: ~1650 kg

Condition: excellent (used), CATALOGUE NUMBER 7611 Technical specifications: - inlet dimensions: 460x180mm - outlet diameter: 300mm - roller width: 550mm - roller diameter: 350mm - number of blades: 10 pcs - blades arranged in 2 rows - automatic reversing - blade setting device - screen diameter: 30mm - top and bottom conveyor belt - lower drive roller - length of the feed conveyor belt: 4400mm - main motor: 37kW - top feed motor: 1.5kW - bottom feed motor: 2.2kW - dimensions (L/W/H): 6100x1150x1000mm - weight: approximately 3500kg ADVANTAGES - Made in Germany - Automatic reversing Hjdpezruibsfx Af Sou - Top and bottom conveyor belt - Blade setting device - Very good condition - Used shredder Net price: 98,900 PLN Net price: 23,000 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2001, CATALOGUE NUMBER: 7089 TECHNICAL DATA - Inlet of the loading hopper: 1020x1230mm - Working width of the rotor: 1020mm - Rotor diameter: 348mm - Main motor: 22kW, 400V, 50Hz - Pump motor: 0.75kW - Number of knives: 50 pcs - Knife dimensions: 35x35x20mm - Screen mesh: 12mm - Pressing drawer - Electric automatic reversing - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Automatic reversing – Similar to WEIMA WL 10 – German made – Pressing drawer – Very good condition – Used shredder, DTR+CE documentation Hodpfeztau Sjx Af Ssu Net price: 99,900 PLN Net price: 23,233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number: 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife dimensions: 30x30mm - Screen: 20mm - Pressure plate - Electric auto-reversing - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approximately 2500kg ADVANTAGES - German-made - Auto-reversing - Pressure plate - Very good condition - Used wood chipper Hodpfszxhfcex Af Sou Net price: 85,900 PLN Net price: 19,977 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2018, Catalog number 7974 TECHNICAL DATA - Inlet of the enlarged loading hopper: 1500x1730mm - Outlet for shredded wood: ø 200mm - Rotor working width: 990mm - Main motor: 22kW - Pump motor: 0.75kW - Number of knives: 54 pcs - Knife dimensions: 40x40mm - Mesh size: 20mm - Clamping slide - Electric auto-reverse - Dimensions (L/W/H): 2500x2200x2350mm - Weight: approximately 2000kg ADVANTAGES - German production - Pulsating pusher - Halfway pusher - Fast/forward pusher – automatic adjustment of the clamping slide speed - Original DTR documentation + CE, year 2018 Hsdpfx Afozrnbwe Sou - Clamping slide - Auger – screw conveyor, responsible for chip transport - Auto-reverse - Used wood chipper, very good condition Net price: 115900 PLN Net price: 26950 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7610 Technical data: - inlet width 410mm - inlet height 140mm - roller width 430mm - roller diameter 400mm - number of knives 2 pcs - screen dimensions 80x130mm - top roller, grooved - bottom 2 rollers, grooved - feed belt length 2850mm - feed belt width 390mm - auto-reverse - main motor 30kW - feed motor 2 x 2.2kW - machine dimensions (L/W/H) 4800x1550x1200mm Hsdpfsztq Uvjx Af Sju - weight approximately 2200kg ADVANTAGES - Made in Poland - Auto-reverse - With feed conveyor - DTR documentation - Used shredder, very good condition Net price: 75900 PLN Net price: 17651 EUR Net price calculated using the exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, Tunnissen TS 532 shredder • Throughput 260 mm • Equipped with slow-moving vehicle chassis • Wide tires • Own registration plate • Available as a combination, see reference 12298 Hsdpfex I Dvrjx Af Sou Condition: Used

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Hjdpez Ekb Dsfx Af Seu Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm Hjdpfxjvad Hpe Af Seu feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine approx.LxWxH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Machining area can be partitioned, partition wall available *

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm Hodpfx Afjy E Hyno Sju span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Hsdpsu Idmvofx Af Seu Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: used, Technical details: Hjdpfxju Idxfe Af Sou number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm Hsdpfxevc Avbs Af Sju y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm Hjdpfx Afovithzo Sou z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,468 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,800 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis HAAS VF5-HE vertical machining centre was manufactured in 2005. It features a spacious table size of 1372 x 610 mm and a maximum table load of 1800 kg. The machine offers impressive X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF5-HE machine we have for sale. Contact us for further details. • Table dimensions: 1372 x 610 mm • Rapid traverse speed: 18,000 mm/min • Spindle motor power: 30 hp • Tool magazine capacity: 20 positions • Tool change time: 4.2 sec • USB port • 3-color status light • Through-spindle coolant Additional equipment • Tool probe • Renishaw wireless workpiece probe Hedozibu Sjpfx Af Ssu • Chip conveyor • Set of tool holders • Documentation Technical Specification Taper Size BT 40

Condition: excellent (used), Catalog number: 8076 TECHNICAL DATA - Shaft width: 510mm - Number of knives: 4 pcs - Max. thickness of workpiece: 260mm - Digital display for planing thickness – Top: - Chip deflectors - Infeed roller Hsdpfxezuk Ifj Af Ssu - Planing shaft - Pressure roller - Outfeed roller (smooth, pulling, metal) – Bottom: - Bed plate, mounted on 4 screws - Motor, approx. 5.5kW - Brake - Electric bed lifting - 2 feed speed settings: 4/16 m/min - Diameter of dust extraction port: 140mm - Dimensions (L/W/H): 1000x1100x1100mm - Weight: 562kg ADVANTAGES - Made in Italy - Electric bed lifting - Used thickness planer, very good condition Net price: 17,900 PLN Net price: 4,163 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Oi-MC, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 510 mm Table length: 1,200 mm Table width: 510 mm Orientation: Horizontal Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Tool positions: 24 MACHINE DETAILS Control: CNC Control system: Fanuc Oi-MC Number of axes: 3 Power: 11 kW Dimensions & Weight Hedpfx Afoz Ebb Ue Sou Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Shipping packages: 3 Operating hours: 3,010 h EQUIPMENT Spindle cooling Documentation CE marking External cooling Tool magazine Chip conveyor Tools included

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Hedpju Idgcjfx Af Ssu Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal double-column band saw designed for professional use in metalworking. It is suitable for the precise cutting of solid material, tubes, and profiles, and stands out for its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously adjustable cutting speed from 17 to 110 m/min, it is highly versatile. The powerful 7.5-kW saw motor, the hydraulic workpiece clamping system, and the 150-liter cooling lubricant system ensure reliable and economical operation. Weighing 2,100 kg, the HBP 430N offers high stability and is ideally suited for daily use in metal fabrication, steel construction, and mechanical engineering facilities. Hsdpfxszq S Ncs Af Seu Technical Specifications HBP 430 N Working range at 90° (round): Ø 430 mm Working range at 90° (flat): 600 × 430 mm Working range at 45° (flat): 320 × 430 mm Minimum material dimensions: 15 mm / 10 × 15 mm Minimum cut length: 10 mm Remnant length: approx. 40 mm Cutting speed: 17–110 m/min Coolant tank: 150 l Belt tension: 80 bar Saw motor: 7.5 kW Hydraulic motor: 2.2 kW Coolant pump: 0.12 kW Chip conveyor 0.09 kW Rated power approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse rating 35 A Cable cross-section: min. 4 × 6 mm² Band saw blade dimensions: 5,800 × 54 × 1.3 mm Machine weight: 2,100 kg Workpiece support height: 700 mm

Condition: excellent (used), Catalog number: 7973 TECHNICAL DATA - Inlet width: 410mm - Inlet height: 210mm - Shaft width: 430mm - Shaft diameter: 330mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 50x50mm - Toothed drawing shaft (bottom) - Lower shaft motor: 1.1kW - Toothed drawing shaft (top) - Upper shaft motor: 1.1kW - Vibrating screen Hsdpfxozw I Hkj Af Seu - Vibrating screen length: 4160mm - Vibrating screen width: 370mm - Main motor: 45kW - Auto-reverse (adjustable) - Reverse gear - Overall machine dimensions (L/W/H): 2150x1450x1050mm - Overall vibrating screen dimensions (L/W/H): 4160x650x880mm - Weight: approximately 2500kg ADVANTAGES - German-made - Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload - Reverse gear - DTR documentation - Used shredder, very good condition Net price: 73900 PLN Net price: 17186 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed drive rollers, top and bottom, 2 x 2.2kW - Electric automatic reversing system - Reverse gear - Belt conveyor - Conveyor length: 5100mm Hodezruu Djpfx Af Sou - Belt width: 400mm - Main motor: 30kW - Shredder dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight: approximately 3000kg - With belt conveyor - Electric automatic reversing system (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 68900 PLN Net price: 16023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)