Used Mubea Mubea 55 Aufnahme 50N for sale (6,561)

Condition: ready for operation (used), Year of construction: 1999, Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement. Kjdsylbqyjpfx Apmjna

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Ksdpfxoxf Ii Uo Apmjna

Year of construction: 2018, condition: ready for operation (used), A textile washing machine and a textile dryer, both from the manufacturer Nexia, are available. 1) Textile washing machine Nexia LC 55, year of manufacture: 2018, connected load: 9kW, heating medium: steam, max. steam pressure: 4.5bar, drum speed: 829rpm, max. batch weight: 55kg, drum diameter: 977mm, drum depth: 753mm, drum volume: 565l, machine weight: approx. 1700kg. 2) Textile dryer Nexia 55S, year of manufacture: 2018, connected load: 2.2kW, drum speed: 25rpm, drum volume: 1085l, drum diameter: 1200mm, max. batch weight: 36kg, heating type: steam, machine weight: approx. 800kg. Documentation available. An on-site inspection is possible. Kjdpfoyhqckox Apmona

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Knedpfx Aezhntrjpmja

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 50 h, overall weight: 640 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 400 mm, de machine is in nieuwstaat. neem contact op voor meer info. Knsdpfx Aezugnhepmoa

Condition: good (used), Green sorting line with 55 pockets, Timmer, FinScan (BoardMaster). Kjdpjzuc U Rjfx Apmena

Condition: used, functionality: fully functional, power: 122 kW (165.87 HP), fuel type: diesel, color: gold, operation weight: 22,600 kg, Year of construction: 2017, operating hours: 9,600 h, Equipment: adjustable boom, air conditioning, cabin, centralized greasing system, quick-change device, rear view camera, CAT 323FL tracked excavator Year of manufacture: 2017 9,600 hours 122 kW CAT C7.1 6-cylinder engine 22,600 kg OQ70/55 fully hydraulic quick coupler All lines Adjustable boom Central lubrication system Protective cage Automatic climate control Knodpfxozubf Ij Apmea Camera 3 m undercarriage width ACCIDENT DAMAGE! Rolled over onto its right side, engine runs normally.

Condition: used, Offer consist of: Calender production system -Rilecart R 800 -Rilecart R 422 -Rilecart FAR-5/55 MK2 -SETMASTER Kjdpfx Aozru Scjpmjna -Kugler All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2019, condition: as good as new (ex-display), Used Machine Year of Manufacture: 2019 Condition: Display model, like new Features and Technical Specifications: - Battery voltage: 18 V - Saw blade diameter: 160 mm - Bore: 20 mm - Cutting depth: up to 57 mm at 90° Kedjzrpxwepfx Apmona up to 40.5 mm at 45° - Tilt range: -1° to 48° - No-load speed: 4,850 rpm - Dust extraction port - Weight: approx. 4.5 kg

Condition: used, Barloader FMB TURBO 5-55/3200"A" Knedpfxsy Umvbe Apmoa

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Kedpfxjl Dpc Ee Apmona Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Knedjyfu N Aspfx Apmoa Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change holder, turning tool holder, clamping holder, turning tool holder, lathe turret tool holder -Manufacturer: Kelch, tool holder steel holder -Socket: Ø 32 mm, bolt circle Ø 102x18 mm -Quantity: 1x holder available -Dimensions: 295/140/H110 mm Kjdpfx Ajzq Afbjpmsna -Weight: 8.8 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm Knjdszqyw Iopfx Apmja -Weight: 8.7 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: Ø 167 mm -Hole: Ø 50 mm -Dimensions: Ø 167 x 62 mm -Weight: 5.9 kg Knedpfxszqyrxe Apmja

Condition: used, Year of construction: 1996, functionality: unexamined, ARBURG 221 M 250-55 injection molding machine. Clamping force: 250 kN. Year of manufacture: 1996. Complete with its two control cabinets (without display screen). It is sold in its current condition and is available for immediate removal, unless it is sold in the meantime. You are welcome to visit and inspect the machine at our warehouse. We are open from 9:00 AM to 4:30 PM every day from Monday to Friday. Address: 11/14 Avenue Marcelin Berthelot, 92390 Villeneuve-la-Garenne, France. Kedpfxsztgpco Apmsna Price: €1000, loaded onto your truck. Please feel free to call if you require further information.

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 spare part no.: 6443081 manufacturer no.: 345449 Kedpfx Apjltrpzjmona Dition: gebraucht

Condition: used, Polar 55EM paper cutting machine. Ksdpfx Apsztanfsmsna

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 490 kg, SIEMENS 55 kW engine New 1486 rpm 12-month warranty Kedpfxszr Imaj Apmjna

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911294-0120, Rotary indexing table DV 55, manufactured in 2014, can be used for pre- or post-machining. Knodpfx Ajzpygtepmoa In excellent condition! We have 2 units in stock at our Schlitz warehouse.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, For Sale: Flow 9XVD-55 High-Pressure Pump We are offering a Flow 9XVD-55 high-pressure pump for waterjet cutting applications. Condition: The machine is disconnected and ready for collection. Sold in its current condition. Suitable for recommissioning, refurbishment, or spare parts. Specifications: Manufacturer: Flow Model: 9XVD-55 Type: High-pressure pump for waterjet systems Kodpfxszrznwj Apmena Many spare parts according to the photo. Complete manuals included. Inspection is possible by prior arrangement.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 2,605 mm, total width: 3,135 mm, total length: 3,055 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 1,050 kg, table load: 200 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 200 kg, Equipment: documentation/manual, type plate available, This WENZEL SF 55 coordinate measuring machine is a modern and highly precise solution for the dimensional inspection of mechanical parts. Kedpjzrtm Sjfx Apmjna Built in 2021, it is equipped with a 5-axis Renishaw PH20 measuring head, WM Quartis software, and a temperature compensation system, offering high performance in testing and quality control operations. Key features: * Year of construction: 2021 * Measuring range: 500 × 500 × 500 mm * Measuring uncertainty MPEE: 1.8 + L/350 µm * 5-axis Renishaw PH20 measuring head with Head Touch technology * WM Quartis measuring software * Temperature compensation system * WPC 2040 control unit * Complete set of monitor, keyboard, and mouse * Reference sphere included Equipment: - Complete and ready-to-use measuring system - HT400 (RC) control panel - Compressed air maintenance unit - User, maintenance, and operating manual - CE declaration of conformity Otto Machine For over 30 years, Otto Machine has been selecting and selling used machine tools and measuring systems in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: used, Year of construction: 2023, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal process pump in excellent condition. Specifications: Manufacturer: GEA Hilge Type: MAXA 200-400 CNY 200/200/55/4 Year of manufacture: 05/2023 Capacity: 280 m³/h Head: 20 m Motor power: 55 kW Siemens IE3 electric motor Speed: 1,450 rpm Stainless steel pump housing Complete plug-in unit with motor, coupling, and base frame Kedpszrm I Nofx Apmjna Suitable for the food, beverage, dairy, pharmaceutical, and chemical industries The pump is sold as is, where is, without any warranty. Delivery: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, Year of construction: 2008, operating hours: 85,394 h, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, Screw Compressor with Inverter ATLAS COPCO ZT 55 VSD 18.5kW 3.35m3/min 13bar The professional level of service and high-quality goods offered by our company – 'market-proven' – guarantee successful cooperation with you. We provide a warranty on used compressors and dryers! Kjdjy Amh Hopfx Apmsna Our advantage is 24/7 compressor service. Screw Compressor with Inverter ATLAS COPCO GA18VSD 18.5kW 3.35m3/min 13bar Technically sound, ready for operation.

Year of construction: 2023, condition: ready for operation (used), WHEEL CUTTING MACHINE FOR PALLET BLOCKS. MACHINE WORKING ON OCCASION. MINIMUM 50X50mm Knjdok Nf S Ropfx Apmsa MAXIMUM 150X150mm