Used Meba 335 Ga for sale (6,696)

Year of construction: 2024, condition: new, The pasteurizer is suitable for heat treating liquid, low-viscosity food products. The device is designed in accordance with food hygiene requirements. The heat treatment is carried out via a heat exchanger equipped with a stainless steel tube coil. The thermal energy is provided by a heating oil boiler. The temperature of the heating water is regulated by the boiler control. The temperature control of the treated liquid is achieved by a controlled switching valve. Temperature is monitored at two points: once in the heating medium and once at the product outlet. The device regulates the temperature of the heating medium automatically. Operation is fully automated. If the temperature of the juice to be pasteurized falls below the desired temperature, the output of the device is blocked and the juice circulates in the bypass system until the temperature reaches the set level. After that, the device allows filling again. After work is finished, the tube coil can be cleaned very easily using a sponge ball system. The device requires only minimal maintenance. ⚙️ Technical Information Capacity: 400 L/hour (when heating from 20°C to 80°C) Power requirement: 1 kW, 230 V, 6 A Boiler output: 35 kW Fuel: Diesel or gas Material: AISI 304 stainless steel Dimensions: Length: 1820 mm Width: 620 mm Height: 915 mm Protection class: IP65 Connections: DN 25 Exhaust pipe: 110 mm diameter Automatic temperature control Automatic bypass system Easy cleaning with sponge balls Lodov Srw Tjpfx Aftjad Low maintenance Options: Manual bag-in-box filling device Semi-automatic bag-in-box filling device 3-head bottle filling module Accessories: Sponge balls for cleaning

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Lasdpshpx U Ajfx Aftjd

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, RESERVED 12 months warranty, in stock, available for immediate delivery, in excellent condition Resistance-heated system with a gas-tight furnace chamber suitable for hardening, brazing, sintering, annealing, ashing and preheating. -Tmax 800°C -Rod program controller SE-402 -3-zone heating -Gassing system -Max. gas operating pressure 7 mbar -Gas circulation -Gassing system, vacuum-tight Laodpfxjyxlwre Aftjd -Gas purging system -Vacuum system -Note: no safety package installed! -Inner chamber dimensions WxDxH 580x830x1500 mm (special length) -Chamber volume approx. 722 liters -Max. load weight approx. 1000 kg -Two-stage rapid cooling with frequency converter -Burner with flame monitoring -Automatic shutdown / emergency purging in case of flame failure, not in case of power failure! -Sight glass DN150 -Max. gas operating pressure 7 mbar -Power supply 400V, 3 phases, N, PE -Heating power 70 kVA -Rated current 3x97A -Weight 1900 kg -Outer oven dimensions WxHxD 1700x1950x2750 mm -Control cabinet dimensions WxDxH 510x1360x500 mm -Operating manual, wiring diagrams, CE declaration The furnace is offered as refurbished. Electrically tested, including test reports. Inspection in our warehouse by appointment! The furnace is not suitable for gas nitriding with NH2/ammonia! Furnace, furnaces, industrial furnace, melting furnace, annealing furnace, heat treatment furnace, sintering furnace, protective gas furnace, tempering furnace, hardening furnace, chamber furnace, brazing furnace, debinding furnace, dewaxing furnace, stress-relieving furnace, vacuum furnace, protective gas furnace.

Condition: used, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel Ledpfozhk Rmjx Aftoad - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: excellent (used), Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Lodpfx Afszd R Tgotjad Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Side feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Lodszd Dm Hopfx Aftsad Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Year of construction: 2016, condition: excellent (used), Horiba Here we offer you a Horiba exhaust gas system, model Mexa 7100D. Laodpfszdy Rnjx Afted Including JAG-10-000-061 cylinder trolley, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems, modal analysis (dynamic or transient analysis) during non-stationary operating conditions. Analyzer for CO/CO2 (HC, NO, N2O, SO2), O2, THC 200 operating hours Weight: 620 kg Year of manufacture: 2016 Type: Mexa 7100D Condition: used Collection from our location Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport - 3000 mm feed gripper with single-stroke, rotating movement - Double miter saw Lsdpfx Aszdq Hmjftsad - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports - General technical data in the appendix This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: used, functionality: fully functional, machine/vehicle number: CF17E-55235, Year of construction: 2022, operating hours: 3,887 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, power: 41 kW (55.74 HP), fork length: 1,200 mm, empty load weight: 4,020 kg, total length: 2,560 mm, drive type: Erdgas, construction width: 1,150 mm, Natural gas forklift Chassis number: CF17E-55235 Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Ledpfxezhc Ahj Aftoad Rear tire size: 6.00-9 Rear tire condition: 80 - 100% Description: The unit has been refurbished both visually and technically. Maintenance, including replacement of transmission and engine oil, has been performed. UVV inspection has been renewed. Side shifter, 3rd valve, 4th valve, rear work light, roof covering, windshield, semi-cabin, heater, load protection grille, full free lift, CE certificate, seat heating, Semi-cabin including PVC side doors, Henmar oil bath pre-air filter, fingertip control

Condition: used, Year of construction: 2021, operating hours: 37,000 h, INVERTER COMPRESSOR GA 75 VSD, IN EXCELLENT CONDITION. THE MACHINE HAS BEEN SERVICED EVERY 4 MONTHS (WE ARE AN OFFICIAL DEALER). NEW PRICE: €96,968. MAIN FEATURES: Gujbryiozdf U Ts Uyloc MAXIMUM PRESSURE: 13 BAR POWER: 75 kW / 100 HP FLOW RATE: 13500 LITERS/MINUTE Request further information. Lsdpfjzdga Djx Aftsad

Condition: like new (used), Year of construction: 2022, operating hours: 9,900 h, INVERTER COMPRESSOR GA 75 VSD, IN LIKE-NEW CONDITION (WE ARE AN OFFICIAL DEALER). NEW UNIT LIST PRICE: EUR 96,968. MAIN FEATURES: MAXIMUM PRESSURE: 13 BAR Laedpfx Afozdf U Tstjd POWER: 75 kW / 100 HP FLOW RATE: 13,500 LITERS/MINUTE

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, Compressor in like-new condition (demonstration unit), only 2000 hours of use. We are an authorized dealer. New list price: €32,074. Main features: Maximum pressure: 10 bar Power: 15 kW / 20 hp Lodozdf Iyepfx Aftsad Flow rate: 2940 liters/min

Condition: like new (used), Year of construction: 2025, operating hours: 3,800 h, Atlas Copco compressor (demonstration unit). Condition is like new. We are an official Atlas Copco dealer. The compressor will be delivered after a full service and will be ready for use. National list price for a new unit is €51,569. Main features: Max. pressure: 10 bar Power: 30 kW / 40 hp Lodpfezdf Imsx Aftjad Flow rate: 6540 liters/min

Condition: good (used), Year of construction: 1997, load capacity: 3,000 kg, lifting height: 3,350 mm, fuel type: gas, mast type: duplex, construction height: 2,200 mm, Hyster H3.00XM Duplo 335 Sideshift / Fork Adjuster LPG 1997 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Lsdjzg U Uaopfx Aftsad Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2006, SAACKE gas burner GLS 80 year 2006 6000 KW Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures Lsdpjtzxn Hofx Aftjad A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: good (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 096106384, input voltage: 230 V, overall weight: 451 kg, input frequency: 50 Hz, Edwards Helios-E Gas Abatement system in Excellent Condition! Description: system for Effective exhaust management of CVD processes for semiconductor processing. Manufacturer: Edwards Model: Helios-E Sr.no. 096106384 Manufactured 2009 Power: 1Ph, 230V, 50 Hz. Weight: 451 kg With documentation Lajdpjv Diqnjfx Aftod

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon Lodjvrzakjpfx Aftoad 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: used, Year of construction: 2014, operating hours: 39,000 h, Atlas Copco compressor, in perfect working order and exceptionally quiet (we are official dealers). Key features: Ledpfx Ajzc Hmhjftsad Maximum pressure: 10 bar Flow rate: 19200 liters/minute Power: 110 kW / 150 hp

Condition: new, Year of construction: 2025, new compressor with warranty (we are official dealers). discounted price. list price euro 25441. possibility of combining Atlas Copco dryer (available). latest technological model. main features: max bar 10 Laedpewcm Hijfx Afted power 15kw-20hp air flow liters7min 3000 for detailed technical sheet do not hesitate to contact me.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total length: 5,000 mm, total width: 1,500 mm, type of input current: three-phase, year of last overhaul: 2024, working width: 1,500 mm, We are offering this very well-maintained Tesoma Compact gas dryer tunnel, 1.50 m wide, year of manufacture 2009. If you have any questions or would like more information, please feel free to send us a message or call us. Transport to be arranged by the buyer, price excluding VAT. Laodpfjy Icdhex Afted

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Volume flow: 131.9 l/s Lajdpszf Afqofx Aftod Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: new, Showroom promotion... NEW, unit No. 1 available for immediate delivery. CE certified. The MACC SPECIAL 335 MS is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor and a special gearbox complete with a bronze gear, hardened, and ground worm screw. The appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable Widia inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned with the rotation of the blade. Equipped with a safety device on the flywheel cover and the blade, the machine is completed with a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor; 2. lowers the saw arm for cutting; 3. the saw arm returns to the starting position; 4. stops the bandsaw motor; 5. opens the vice. Manual cutting is also possible. Cutting speed (m/min): 38-77. Cutting thickness (mm): 1.2. Cutting range: 45° left, 60° right. Stop for cutting the same size: adjustable. Electric pump for bandsaw cooling: 0.06 kW. Cutting capacity at 0° (round, square, rectangular): 260 / 250x250 / 220x330. Cutting capacity at 45° left (round, square, rectangular): 225 / 210x210 / 160x225. Cutting capacity at 45° right (round, square, rectangular): 215 / 200x200 / 160x210. Cutting capacity at 60° right (round, square, rectangular): 130 / 130x130 / 130x140. Blade dimensions: 3010x27x0.9. Weight [kg]: 415. Ljdpfog S Ui Aox Aftsad

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 140, type 335 009-01, SN: 8657728B, offered under an exchange service. The unit is professionally overhauled and fully tested, supplied with a 6-month warranty and guaranteed 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return unit must not have any mechanical damage such as breakage, as these cannot be repaired. In such cases, an additional charge of €500 incl. VAT applies. Laedpfx Ajx Etmzoftod Attention: You are bidding on a Heidenhain Inverter UV 140, 335 009-01, SN: 8657728B in exchange (Exchange service), professionally fully overhauled and tested, with a 6-month warranty, 100% functional. Scope of delivery as per photos. Please note: In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as fractures, as these are irreparable. In such a case, an additional invoice for €500 incl. VAT will be issued.

Condition: ready for operation (used), Heidenhain UV 140 power supply unit ID 335 009-01 SN 8657728B. The item has been completely overhauled and comes with a 3-month warranty. Professionally fully refurbished and tested, in good preserved condition, 100% functional. Scope of delivery as shown in the photos. Lasdpfox Etpcjx Afted

Condition: ready for operation (used), Heidenhain UV140 power supply unit ID: 335 009-03 SN: 11524271D; the item has been refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Ljdpfxsy Nrppo Aftsad