Used Measuring Table Measuring Plate for sale (31,616)

Condition: like new (used), total width: 20 mm, total length: 24 mm, total height: 16 mm, Liquiline CM442 Controller, ENDRESS HAUSSER - IND27827-OC - 063 Liquiline CM442 is a state-of-the-art transmitter for measuring parameters such as pH, redox, conductivity, oxygen, chlorine, turbidity, sludge level, COD, nitrate, etc. The Liquiline CM442 transmitter allows you to connect up to 2 Memosens sensors of your choice from more than 12 measurement parameters. It automatically recognizes the sensors, is easy to operate, and features standardized spare parts that are compatible with other devices in the Liquiline platform. With its inputs, outputs, controllers, and mathematical modules, you can even control cleaning systems and dosing pumps. Heartbeat Technology helps to find the ideal balance between the availability of the measurement point and maintenance costs. Liquiline CM442 is suitable for all industries and their auxiliary applications, such as: Food and beverage Life sciences Power plants and energy Njdpfx Aez Tl Rkob Aedc Water, wastewater, and waste Chemicals Marine It features the following communication protocols and interfaces: 0/4 ... 20 mA HART PROFIBUS DP Modbus RS485/RTU Modbus TCP EtherNet/IP PROFINET Web server The transmitter can be expanded with a module whose approvals for explosion protection, such as IECEx, ATEX, and CSA, allow it to be connected to sensors installed in areas with a risk of explosion. Advantages Intelligent Simplicity: one controller for all parameters and applications, with an intuitive user interface, automatic sensor recognition, and plug & play hot-swapping with pre-calibrated Memosens sensors. High Flexibility: universal modules for all parameters minimize spare parts inventory and allow the system to be expanded at any time with up to 8 channels. Direct Integration into the System: the unique portfolio of communication standards adapts to any distributed control system (DCS). Simple and Safe Commissioning: the ability to save the configuration to an SD card allows for quick commissioning of duplicated installations. Remote Process Control: integrated web server that allows the operator to remotely view diagnostic data, perform configurations, or access the equipment parameters from any web browser, even from a smartphone. Higher Availability, Lower Costs: Heartbeat Technology enables condition-based maintenance and simple verification of the complete measurement point, in addition to helping you take optimization measures. Promoting Connectivity: Liquiline Edge Module CYY7 transfers process data to Netilion, regardless of the fieldbus. This allows for an overview and the use of IIoT services. It is available in new products or as an upgrade for installed Liquiline platforms. Summary of Specifications Input 1 to 2 digital Memosens inputs Output / Communication 2 to 4 current outputs of 0/4 to 20 mA Alarm relay, 2 relays Ingress Protection IP 66 / IP 67 Additional Certificates EAC, cCSAus, MCERTS

Condition: repair required (used), Year of construction: 1996, power: 5.5 kW (7.48 HP), Equipment: scorer, Panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 1996 Sliding table length: 2,800 mm Ndodoz Urzljpfx Ab Aoc Cutting width: approx. 1,013 mm Saw blade diameter max.: 350 mm Power: 5.5 kW Cutting width adjustment: Electric Height and angle adjustment: Electric Scoring saw: Yes, 2-axis adjustment Motor brake: Yes

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine from Zett Mess Platen and 2 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Platen dimensions: 6,000 x 3,100 mm Measuring range: X/Y/Z 6 / 3,100 / 2,500 mm Ndjdpfj Aa Ikfex Ab Ajc Service available from the successor company, Zett Mess Includes all accessories Price: EUR 9,500.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works Ndsdpfx Ao Aa Im Tob Aoc

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). OilQuick OQ45-5 Adapter Plate / Bolt-On Adapter / NEW / in stock & immediately available Price: €2,390.00 net / €2,844.10 gross Bolt pattern drawing can be found in the photos. 2x 1/4" connectors 1x 1/4" poly connector Ndedpfeyl Hf Nsx Ab Ajc 2x 1/2" connectors Excavator class: 5 to 12 tons Weight: 88 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 All compatible Westtech products are also available from stock! We carry many more OilQuick adapter plates in our warehouse, all available for immediate delivery! Mr. Herden (tel. ...) will be happy to assist you. Upon request, we are happy to offer tailored financing options. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete OilQuick product range! Errors and prior sale excepted! = Further information = Application: Construction Please contact Marius Herden for further information.

Condition: new, Year of construction: 2026, The CORMAK TA3510R scissor lift table trolley with rollers is a mobile device designed for lifting, transporting, and transferring loads between workstations. The platform, equipped with 9 transport rollers, facilitates the movement of components and containers, while the wide height adjustment range allows the working level to be adapted to machines, assembly tables, and other loading and unloading stations. Key Benefits of the TA3510R Scissor Lift Table Trolley with Rollers - Load capacity of up to 350 kg – enables the handling of heavy components, containers, semi-finished products, and other loads used in production and logistics processes. - 9 rollers with a diameter of 50 mm – reduce resistance when moving loads across the working surface and facilitate their transfer to adjacent workstations. - Lifting height of up to 1360 mm – allows the working surface height to be adjusted to different material loading and unloading levels. - Working height range from 400 to 1360 mm – enables a single device to be used at workstations of different heights. - Mobile design – allows loads to be transported between successive stages of the production process without the need for a stationary lift table. - Transport, lifting, and load transfer functions – one trolley can perform several operations related to material handling within a facility. Roller Platform for Easier Material Handling The key feature of the TA3510R model is its working surface equipped with 9 rollers, each 50 mm in diameter. Unlike a conventional solid platform, the rollers allow properly supported loads to be moved along the working surface without having to lift them completely when transferring them to the next workstation. This solution is particularly useful when working with workbenches, assembly stations, production lines, and other material transfer surfaces. Once the platform has been adjusted to the appropriate height, the load can be moved from the trolley to the workstation or in the opposite direction. This reduces the number of manual lifting operations and improves material flow between successive stages of the production process. Wide Working Height Adjustment Range The TA3510R scissor lift table trolley operates within a height range of 400 to 1360 mm. This allows the rollers to be positioned at a level suitable for receiving or transferring loads, which is particularly important when servicing workstations of different heights. The adjustable height can also improve operator ergonomics. Instead of repeatedly lifting a heavy component from a low position onto a workstation, the trolley platform can be positioned as close as possible to the required height, allowing the load to be moved along the rollers. During repetitive production and assembly operations, this reduces unnecessary material handling. Mobile Lift Table for Production and Internal Logistics The lift table with rollers combines the functionality of a mobile transport device with an adjustable material transfer station. The 455 × 800 mm working surface allows various components, containers, and assemblies to be handled, provided that the load is properly supported and the maximum permissible load capacity is not exceeded. TA3510R Technical Specifications Load capacity 350 kg Minimum table height 400 mm Ndsdps Aa Nf Defx Ab Aec Maximum table height 1360 mm Working surface dimensions 455 × 800 mm Wheel diameter 120 mm Rollers 9 × Ø50 mm Weight 106 kg

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions Ndodet E Nw Topfx Ab Ajc

Condition: used, Year of construction: 1994, functionality: fully functional, Martin swivel spindle milling machine T25 with accessories Functional Location: Freising Inspection is welcome. We have other used machines available. Please contact us. Njde Aaz H Tepfx Ab Aedc

Condition: ready for operation (used), Granite – Measuring plate & height gauge TESA – Micro-Hite - Plate dimensions: 3000x1300x350 mm - 2 x tailstock centers / center height 250 mm - Height gauge – TESA Micro-Hite / measuring range up to 600 mm Nedpfe Aazamsx Ab Ajdc Dimensions: L x W x H 3.3 x 1.4 x 1 meter / Weight approx. 3000 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NM - SPM, total length: 13,500 mm, total width: 1,700 mm, total height: 1,700 mm, Equipment: CE marking, Can packaging conveyor with scales and 19 workstations for professionals Equipment description: Up to 250 empty cans can be stored on the line workstations we can make how much you need. Each workstation has a KERN EMB 2000-2 scale Equipment width with workstations no larger than 1700mm Njdpfew Afyhex Ab Asdc Equipment height no larger than 1700mm • Equipment frames made of stainless steel AISI 304 • Belt-chain type and butterfly type • Conveyor for full boxes • Conveyor for empty cans • Two full can conveyors • Empty can feed conveyor • Adjustable speeds • Option to record the work results of each person and a total can counter at the end • At the workplace – Scales - Kerne • Custom-made table production at the line • Control box on one side • Line max. power consumption 3.5Kw • Control box to be agreed with the customer. Easy clean Easy to maintain KERN EMB 2000-2 (2000g, d=0.01g) precision scales. Weighing surface 150mm. Simple and convenient 2-button operation Tare function facilitates formulation work Extremely flat design Ready to use: batteries included Single line (for one type of cans, of course, you can also put like Dingle but they have to be placed manually on the conveyor line, or you can order a separate conveyor as an option.) Adjustable feed speeds - Manufacturing time form first payment: 6 months - CE Certificate and instruction will be transferred when the line will be ready to deliver. - Warranty - 12 months after the customer receives the equipment at their factory

Condition: used, total height: 890 mm, total length: 2,000 mm, total width: 2,000 mm, Year of manufacture: 2007 Colour: Blue Empty weight: 400 kg - Year: 2007 - CE marking present: Yes - Serial number: HL8445 - Transport dimensions: 2000mm x 2000mm x 890mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Ndedpfx Aeyrb Uxsb Asc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, Circular saw Manufacturer: Martin Type: T65 Year of manufacture: 2023 Operating hours: approx. 58 h Table: 860 x 1,370 mm Sliding table length: 3,300 mm Cutting width: 1,350 mm Power: 5.5 kW Speeds: 2,800 / 4,000 / 5,000 rpm Ndodpfxez U Hh Ts Ab Ajc Cutting height: max. 204 mm Saw blade diameter: max. 550 mm Cutting width adjustment: Manual, digital display Height and angle adjustment: Electric The machine table has some surface rust.

Condition: good (used), Year of construction: 1985, functionality: fully functional, Spindle diameter: 110 mm Maximum spindle speed: 1400 rpm Nodpfxe Abinhj Ab Aodc Table surface: 2000 x 1600 mm Control system: Siemens Sinumerik System 8

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, input voltage: 230 V, We are selling our Primescan 3D scanner with two sensors. It is a demo unit with minimal usage for actual measurement. Very good condition, with every original accessory. It comes with two sensors and one controller, which means that only one sensor can be used at once: 1. R8-FOV500 (8MP sensor with 500mm field of view) 2. R5-FOV200 (5MP sensor with 200mm field of view) It comes with one controller, so only one sensor can be used with controller at the same time! If you need the second sensor for the measurement, you need to change the sensor only, but everything else stays the same: with this configuration you can choose between two resolutions and field of views: if you need to scan smaller parts (up to ca. 200mm) you can use the R5-FOV200 sensor, and when you need to scan bigger parts (up to ca.500mm) you can use the R8-FOV500 sensor. Parts of the system: 1. Sensors: R8 FOV500 and R5 FOV200 2. Controller 3. Tripod 4. Turntable 50, 50kg load capacity Ndodpfoumawgjx Ab Asc 5. Optocat software Customs, shipping and transportaion is not included. Training and installation is not included. Please contact me for details, more info!

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: DEK-1807003, working width: 320 mm, total width: 900 mm, input frequency: 50 Hz, input voltage: 380 V, total length: 3,500 mm, type of input current: three-phase, eisenkolb DEKO-2000 Ndsdpfx As Abar Rob Aec Curtain ironing table with preheated rotating surface and steam extraction The ergonomic design of the ironing surface, angled at 6 degrees, with weightless suspension/guidance of the iron, prevents fatigue and RSI (Repetitive Strain Injury). Rotating, electrically thermostat-controlled, heated, and rotating ironing surface measuring 320 x 60 cm, with steam extraction and pedal control. Power consumption according to the manufacturer: 2,000 W The ironing surface can be moved forward or backward using a foot pedal, making it easy to transport an ironed curtain. Vacuum function for optimal steam ventilation and improved ironing results. Fabric trays at the front and rear to keep the curtain clean. Technical specifications: Dimensions: 350 x 90 cm Electrical: 380 V, 3-phase, 2000 W Inspection possible by appointment. Collection in 58239 Schwerte.

Condition: used, Horiba Type: Mexa 7100D Ndsdpfxozdy Rno Ab Aec Horiba exhaust gas system Mexa 7100D Including JAG-10-000-061 cylinder cart, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems Modal analysis (dynamic or transient analysis) during non-stationary operating conditions Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 kg Year of manufacture 2016 Collection from our location Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Johansson Type: Johansson Cordimatic 7000 Coordinate Measuring Machine The coordinate measuring machine for measuring large workpieces. Ndedpszd N Shofx Ab Aoc Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control, rotary/swivel probe & probe changer library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 controller Condition: used Scope of delivery: (See image) (Changes and errors in technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Mahr Type: Helio-Pan II 700 Helio-Pan II Max. workpiece weight 30 kg at center height 100 mm 80 kg at center height 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable runout: 100 mm Center height: 100 mm Measuring probes: probe and measuring slide, 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have over the phone. Ndedpozd R U Dofx Ab Aoc

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: Ndedpfozii Dnsx Ab Asc For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Gruse Type: ELD 1-16-1 Gruse Lifting Table ELD 1-16-1 Easily lift heavy loads Scissor lift table: Lifting table with double scissors ELD lifting table Type description: Type designation ELD Load capacity 500 kg Overall height 350 mm Useful lift height 1600 mm Total height 1950 mm Tabletop 1250 x 800 mm Base frame 1250 x 750 mm Lifting time approx. 21 sec. Power 2.3 kW Weight approx. 600 kg Condition: used Scope of delivery: (See image) Njdpszgclyofx Ab Asdc (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Zwick   Type: BZ1.0 / TH1S Nedpezdryzsfx Ab Aedc   Zwick table-top testing machine   Zwick with a maximum force of 1.0 kN.   Crosshead travel: 1150 mm. Testing speed: 0.1 ... 1800 mm/min   Scope of supply: (See images)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have by phone.

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Njdpezii A Djfx Ab Aedc Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1983, Used Machine Year of manufacture: 1983 Ndedpfx Aszyy Edjb Asc Features and technical specifications: - Automatic - Cutting length: 5,300 mm - Cutting height: 2,200 mm - Max. horizontal cutting height: 2,100 mm - Max. cutting depth: 80 mm - Motor: 5.5 kW - Saw blade diameter: 300 mm - Speed: approx. 5,000 rpm - Dimensions (L x W x H): approx. 6,550 x 1,500 x 2,950 mm

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Njdpfxozix Nmj Ab Ajdc Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2019, Table milling machine HOFMANN TFS 107, manufactured in 2019. Nedpo Adubxefx Ab Aedc Table milling machine with a milling fence and safety guard. Collection possible from December 15th. Earlier collection is only possible by prior arrangement. Inspection by appointment only. Dismantling, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner David Schulz.