Measuring system

Hexagon Primescan

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Itsdpjtuuvzjfx Ahbon Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Ijdpfxelqac Se Ahbjtn Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Year of construction: 2021, condition: like new (used), Mobile 3D coordinate measuring machine Keyence WM-3000 Like new machine, sold because of new purchase Technical data available at manufacturers website Visit possible in 47877, Willich GERMANY Itodpfx Asmrrb Sohbon

Condition: used, machine/vehicle number: 109369/109370, Technical Data Manufacturer: ZEISS Serial No. 109369/109370 The plate is divided in the middle. Measuring Plate Iodpodbi Nlsfx Ahbotn Length = 6000 mm Width = 3000 mm Height = 350 mm The machine can be modernized with new software according to customer requirements. Price: upon request! Installation and commissioning possible! We would be happy to prepare a detailed offer for you! Note: Our offer is exclusively aimed at specialist customers! (Changes and errors in the technical data, information, and prices, as well as prior sale, are subject to change!)

Condition: new, TECHNICIAL SPECIFICATIONS: It can be manufactured from 304ss or 316ss Stainless material in accordance with the preferred surface treatment. The tank side walls are insulated with 50mm glass wool. The tanks that require heating can be produced with serpentine or electric heating. Temperature control is done digitally and follow-up is provided. If necessary, an air mixing device is added to the tanks. In the tanks, stainless ball type valves are used for discharge. WORKING PRINCIPLE: It is based on the principle of surface cleaning and processing by taking the material to be surface cleaned into the baskets as a general application and immersing it in tanks with chemical and / or water by means of a crane and waiting for a while. The aim is to clean the existing oil layer on the metal surface and create a thin film on the metal surface, thereby making the material more conducive to paint and more resistant to external factors. APPLICATION AREAS AND ADVANTAGES: Automotive sector, White goods sector, Lighting sector and General machinery manufacturing sector are facilities that do not require continuous production or provide high and equal quality with less labor in facilities where alternative solutions are not available due to the shape and size of the material or very high capacities are not reached. Chemical values ​​and temperature values ​​can be monitored and controlled by applying automation optionally. APPLICATION: Immersion type surface cleaning applications vary according to preference and required strengths for each sector. As two main applications show: - iron phosphate surface treatment - zinc phosphate surface treatment Apart from these, only applications for cleaning and oil removal can be made. There is an option additional to the immersion tank: * a drying oven * 2 stainless steel baskets DRYING OVEN: Ijdpfx Ahefw N Rtsbotn Generally, the working principle of drying ovens, which is the last step of immersion type surface cleaning units, is like BOX type ovens, however, in order to be suitable for immersion type surface cleaning facility, the parts of the lid are designed on the top side of the oven and the surface cleaning parts are dried in the same basket. In this type of drying system, the parts enter the drying oven and are ready for paint application after drying.

Condition: used, Year of construction: 1996, workpiece diameter 240 mm centre distance 0 mm honing length max. 500 mm max. module 5 total power requirement 12 kW Iodpfot Hwvmsx Ahbstn weight of the machine ca. 5000 kg dimensions of the machine ca. m

Year of construction: 1972, condition: used, This machine is 3x available. Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 Isdpjg Umitofx Ahbotn 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 160 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Itodpfx Ahswbt Rrsbjn Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: MBHF-4BR125, DEMAG KBK crane sky crane runway dimensions approx. 33x6.5m + 4 cranes Payload / lifting load 4x125 KG - 0.125to The crane can also be halved in length Technical data of the system: Crane runway made from Demag KBK2/KBK2T rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, trailing cables, power supply, holders/hangers, etc. incl. 4 bridges with 125KG chain hoist 3x Demag DC-COM + 1x steel Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Itedpom Tvvisfx Ahbon Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: new, Year of construction: 2025, The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in no time at all, thanks to the optional monitoring camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications and in continuous use. Iedpfx Ajdgfgcehbetn The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (Pulsed Fiber Laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New, optional: software-controlled, variably adjustable working width (X, axis max. 450mm depending on the structure) included in the scope of delivery!