Used Müller Mechanik Mmtv-9341 for sale (1,160)

Condition: ready for operation (used), Baumüller GSF 71-M servomotor SN: 89203685 - 22A / 170V, used, in good condition, 100% functional, delivery as per photos Fsdpfjy Nn Ibjx Ak Uspl

Condition: ready for operation (used), Baumüller LS 3.8107D controller board – checked and tested! – 100% functional, scope of delivery as per photos Fpodpfx Aksy Np Ezo Uel

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 06/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve Fpedey R Ipnopfx Ak Usl * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, maximum load weight: 32,890 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2017, next inspection (TÜV): 07/2027, loading space width: 2,480 mm, loading space height: 2,700 mm, Equipment: ABS, Due to the large number of phishing and spam emails, email inquiries can only be processed if you provide your valid telephone number! Unfortunately, we cannot process email inquiries without a telephone number. We ask for your understanding! For telephone inquiries and WhatsApp, please refer to: * 1st HAND * LASI DIN EN 12642 Code XL * SAF axles with disc brakes * Edscha tarpaulin system * Sliding tarpaulin, left + right * Air suspension with lifting/lowering system * Tare weight: approx. 6,110 kg * Tires: 385/65 R 22.5 * Tread depth: 13 mm Fedpfxjzp Tt Ts Ak Ujpl Subject to errors and prior sale.

Condition: ready for operation (used), Baumüller GSF 45-LB servo motor SN:91208506 + ROD 420 500 01-03 rotary encoder Id. 376 840-7P SN:44402097A, used, normal signs of use, 100% functional, scope of delivery as per photos Fpodpfx Aolvy D Hsk Uel

Condition: like new (used), machine/vehicle number: 122, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r 22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions: Internal length approx. 5,100 mm Internal width approx. 2,420 mm Overall width max. 2,550 mm Unladen loading height approx. 1,510 mm Frame: Central axle steel frame welded structure in lightweight construction with optimized weight with tilting supports and rear tilting axle; Plug-in locking system for tipper body with cross-locking Tow hitch: Fodok Ttc Sopfx Ak Uepl Curved drawbar with height-adjustable heavy-duty screw coupling eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support system: At the front, 1 mechanical support winch with crank handle on the left in the direction of travel, manufacturer according to factory specifications, 1 step-up bracket bolted on Axles: BPW-EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road version, automatic brake linkage adjuster 2 axles Axle spacing 1,310 mm Without axle lift Wheels: 4 tires 385/65 R 22.5, 160K, manufacturer according to factory specifications (road profile) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire and spare rim(s) Braking system/suspension: Braking system according to EC directives 71/320 or ECE R13 Two-line pneumatic braking system Braking system manufacturer Knorr EBS system 2S2M, 2nd axle sensed RSS - stability program Spring accumulator parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additionally lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems: Axle load indicator via EBS-CAN bus signal for display via display in the driver's cab Tipper body: Steel welded structure Fixed steel sheet front wall 4 mm, approx. 980 mm high 2 step-up brackets inside and 1 outside on the front wall Fine-grain special steel floor sheet 5 mm (Slight floor waviness due to welding distortion possible) 5 pairs of pivoting lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended pivoting lock and spring-assisted lifting, and additionally pivotable Side walls left and right with manual central locking 2 rear corner pillars at the height of the side walls, fixed on the side Steel sheet rear wall 4 mm (HB400), approx. 980 mm high, pivotable with recessed bearing, hooks for dosing chains (on the rear wall and underside of the body) Rear wall locking = automatic pneumatic closure 2 dosing chains for the pivotable rear wall With sealing strips Hydraulics: 1-line system with hydraulic connection hose including plug-in coupling SVK DN13 Tipper press for 3-way tipping, initial lifting force approx. 30 t; 1 safety cable Tarpaulin: Plastic roll tarpaulin incl. aluminum tube and hand crank, side wall overhang approx. 400 mm, without customs closure, in the direction of travel on the right horizontal Tarpaulin bow rope lashing, zigzag lashing at the front and rear; Stop bracket and locking for rolled-up roll tarpaulin in the direction of travel on the right; Holder for hand crank Tarpaulin fastening in the direction of travel on the left with 2 lashing straps with Rubber pads and tensioning locks on the body

Condition: used, Year of construction: 1978, pressure 63 t throat 280 mm stroke 160 mm table surface area 560 x 500 mm ram surface 280 x 280 mm dayligth 400 mm oil volume ca. 360 l total power requirement 22 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,45 x 1,75 x 2,67 m - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder Fjdpfjhbalnex Ak Uspl

Condition: used, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986, like new condition Fpsdpfx Akji A A Tbs Uol Pressing force 60 tons Stroke 280 mm Table area 740 x 560 mm Ram area 385 x 200 mm Die opening in the table 300 x 200 mm Table area, table insert plate 740 x 560 mm Die opening in table insert plate Ø 103 mm Thickness of table insert plate 70 mm Dowel hole 40 mm Table height above floor 815 mm (with table insert plate) Installation height max. 275 (with table insert plate) Installation height max. 345 (without table insert plate) Stroke adjustment 10-90 mm Ram adjustment 60 mm Stroke rate 100 strokes/min Motor power 3 kW Drive power 380 Volt, 50 Hz - mechanical eccentric coupling with pneumatic control - spring-loaded brake controlled via cam - stroke release via pneumatic foot switch - overload protection with shear plate in the ram - table height adjustment via 2 threaded spindles - manual central lubrication system BEKA - operating manual and pneumatic diagram available Space requirement L x W x H 1400 x 1100 x 2200 mm Weight 3.4 tons very good condition, like new

Condition: ready for operation (used), Baumüller GSF 100-S servo motor, serial number as shown in the photo, hole spacing of the mounting holes: 151 x 151 mm, drive shaft diameter: 32 mm, used, significant signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Fedpfoi D E Eljx Ak Uspl

Condition: new, Baumüller BUM62T -75/97.5-54-M-010, individual power unit for installation, unused, 100% functional. Fpjdpfx Asi D T Hqok Usl

Condition: ready for operation (used), Baumüller DSG 56-L servo motor / Reis robot SN:20236234, used, normal signs of use, 100% functional, scope of delivery as per photos Fpedpfx Aketannqj Uol

Condition: ready for operation (used), Baumüller DSG 56-S servo motor / Reis robot SN:20329577, used, normal signs of use, 100% functional, scope of delivery as per photos Fodetannxspfx Ak Uepl

Condition: ready for operation (used), 12x Müller Martini ring-binder head units, model 0249. Fpjdsh Rayzopfx Ak Uol

Condition: ready for operation (used), IN STOCK - Twin section feeder Fpsdpfsir E Rmsx Ak Usl

Condition: ready for operation (used), IN STOCK - 2 x feeders - Model 888 Fpjdpfxoir E Rue Ak Ujl

Condition: ready for operation (used), IN STOCK - 2 up kit to suit Muller Martini three knife trimmer 217/DSS/890 Fsdpfx Aksir E R Ao Uepl

Condition: ready for operation (used), IN STOCK - 4/5th knife attachment for a MM 360 trimmer Fpodpfxeir E R He Ak Usl

Condition: used, machine/vehicle number: 157, empty load weight: 6,310 kg, maximum load weight: 29,690 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2016, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65 r22,5, color: green, Equipment: ABS, Disc brakes EBS (Electronic Braking System) Wheelbase 1,310 mm Floor 5 mm - Wall 4 mm Hydraulic tailgate and swing-out design BPW axles Fsdpfx Asi Ehy Esk Uspl Alcoa aluminum rims Electric Cramaro sliding roof Underrun protection, foldable Permissible total weight 36,000 kg / technically possible total weight 39,000 kg VIN: 377690 Errors and omissions excepted

Condition: used, Sensor-actuator distributor, distributor strip Fpsdpfx Akod Tqkqj Uel -Type: SAI-8-MMS 4P M12 -8-way: distributor -Weight: 800 g

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, basic feed-in unit Fjdpfsb N E Haox Ak Uopl -Type: BUG622-28-54-E-000 -Number: 4x module available -Price: per piece -Dimensions: 300/100/H380 mm -Weight: 14 kg/piece

Condition: used, power converter / rectifier. Fpedpfx Aod Ihaysk Uel techn. details see photos.

Condition: good (used), Gear motor, electric motor -Speed: 141/1440 rpm -Hollow shaft: Ø 32 mm -Power: 3kW -Dimensions: 500/195/H240mm Fjdpfxjd I Eqno Ak Ujpl -Weight: 47kg

Condition: good (used), Basic - feed-in unit, feed-in module, inverter, frequency converter, frequency transformer, drive inverter, controller, variable speed drive -Type: BUS622-15/22-54-0-000 -Input: DC 540 V/640 V -Output: 3AC 360V/425V 3x15A 0-300Hz -Number: 3x servo power units available -Price: per piece Fpjdped Ndi Hsfx Ak Usl -Weight: 7.3 kg

Year of construction: 2007, condition: refurbished (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter but you can also use it stand-alone or connect it to a other brand machine. Fedpfxod Ddkbs Ak Uspl

Condition: used, Direct current, gear motor -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV Fpjdsd Evukspfx Ak Uel -Dimensions: 605/240/H200 mm -Weight: 30 kg