Used Ksb Boa-C Jl1040 Dn25 Pn6 for sale (54,668)

Condition: used, Vötsch   Type: VCS³ 7027-10   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Gusdpozh Huujfx Af Toh 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Guedoziiwuopfx Af Teh Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, machine/vehicle number: 007966, Position 1: Panel Feeding and Loading SCM-EVOLUTION C undefinedPosition 3: Panel Stacking and Offloading SCM-EVOLUTION C Gedswu Agpopfx Af Touh

Condition: used, IPG Ytterbium Type: YLP-C-1-100-20-20 IPG Ytterbium fiber laser with controller IPG Ytterbium fiber laser Condition: used Scope of delivery: (See image) Guedpfx Afszdyyvs Tsh (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Thermotron Type: Thermotron SE-1000-5-5 Water-cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working area volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70°C to 180°C Temperature control tolerance: 0.3°C Overall dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 32.4 A Refrigerant: R-404A / R23 Approximate weight: 862 kg Gusdpfx Aezd R S Njf Tsh For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 1001, This universal concrete paver machine is suitable for producing paving stones from 4 cm in height up to precast concrete elements up to a height of 650 mm. Gsdpfxoz Ix I Re Af Teuh The machine is in like-new condition!

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn SN: 25 342 980 C, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this item. Please ask for price separately! Guodpfju T Uviox Af Tsh

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm Guedpfsvcb U Ajx Af Tjh - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm Godpfx Asu Nw E Uef Teuh -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale Gujdpfx Aou N Dz Ajf Tsh -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Saw length 4318 mm Gujdpfx Afeiwlmce Toh

Condition: new, Year of construction: 2027, Recirculating air chamber oven, electric, new unit, delivery time 17-18 weeks -Temperature 300°C -Internal dimensions W x D x H: 1500 x 3000 x 2000 mm -External dimensions W x D x H: 2410 x 3560 x 2730 mm -Volume: 9000 liters -Control system: Eurotherm Nanodac, 100 programs with 25 segments each -Additional 100 programs can be saved/loaded via FTP or a USB flash drive -2 recirculating air fans -Double door with safety door sensors -Over-temperature protection, Eurotherm 3216i -Control system/recorder with color touch display Gjdpslkb Ezofx Af Touh -Stable steel construction, anthracite exterior -Motorized dampers -Electrical version: 400 V / 50 Hz / 3NPE -Increased heating capacity: approx. 70 kW -Guide rails, recess for driving in a trolley -Documentation, CE declaration of conformity -Electrical wiring diagram with spare parts list We will gladly offer transport, installation, and training for your employees. As a new unit, it is also available with an exhaust fan and other equipment! Delivery time approx. 10-12 weeks. Please contact us! We offer new and used industrial ovens, which we can also modify and supplement according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, recirculating air oven, chamber oven, heating oven, chamber recirculating air oven, annealing oven, tempering oven.

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climate testing chamber -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Gusdpfx Afeph U Ayo Toh Refrigerant: R 404A used climate chamber Microprocessor-controlled control and monitoring system SIMCON/32 32-bit technology Graphical display of setpoint and actual values Digital display of setpoint and actual values for temperature and relative humidity (%) Digital input for temperature (°C) and relative humidity (%) Integrated programmer Program memory Manual and automatic operation Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm You can find more climate chamber items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven When highly diverse products or product components with equally diverse dwell times need to be processed independently in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven Data Manufacturer: Sat Model: B 2599 A Godpsim Ik Ssfx Af Tsuh Type: 1000T Type: Drawer Oven External Dimensions of the Oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable Volume in Each Drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum Operating Temperature: 130 °C Temperature homogeneity in the usable volume, under stabilized conditions: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel framework, on which the outer cladding made of unalloyed steel is mounted and painted in RAL 1013 (pearl white). The oven's inner casing is made of aluminized steel sheet. Insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of rock wool. Floor: Like the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable load height of 120 mm. Maintenance Doors: 2-wing maintenance door on the back of the oven. Secured with screws. This door provides complete access to the interior of the oven. Part Handling: Parts are handled via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a sealing strip on the drawer bottom to reduce heat loss when opened. Each drawer has a usable load capacity of 120 kg with load distribution over the entire surface. Peak loads of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured by electromagnets and controlled by the Siemens system. A timer is provided in the control cabinet to control the minimum preheating time for each drawer. A timer is provided in the control cabinet to control the maximum preheating time for each drawer. A temperature indicator is provided for each drawer. These indicators will be located on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation capacity: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet synchronous motor, serial number: 68352, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire about the costs for packaging and shipping separately! Gusdoi D Ii Ijpfx Af Toh

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV permanent magnet motor, serial number: MAC093-24699, professionally and completely overhauled and tested, comes with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Gjdsi D Ipbjpfx Af Touh

Condition: ready for operation (used), Indramat 112A-0-ZD-4-C / 130-B-0 / WI572LV / S005 Permanent magnet synchronous motor + Heidenhain Rod 1424.003-600 encoder. 250 040 12, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Gedpfxoi D Ipqj Af Tsuh

Condition: ready for operation (used), Rexroth MAC093B-0-JS-4-C/130-A-1/WI517LV 3-Phase Permanent Magnet Motor, mounting hole spacing: 116 x 116 mm, drive shaft diameter: 24 mm, used, overhauled by the manufacturer in 2007, has not been used since, very good condition, in original packaging, 100% functional. Godpji D Nf Rsfx Af Touh

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Godpfxohp Rcre Af Tsuh Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: good (used), functionality: fully functional, used 3D coordinate measuring machine Mitutoyo Euro C Apex 544 On our marketplace, we offer a pre-owned Mitutoyo Euro C Apex 544 3D coordinate measuring machine that retains impressive reliability and measurement accuracy despite its older age. This machine has been extensively inspected and tested by our experts to ensure that it still meets the high standards of metrology. The Euro C Apex 544's precise measurements, robust construction and durable components make it an excellent choice for quality control in manufacturing today. It has been thoroughly calibrated and tested by us so that it is ready for use in your production. Technical data: Gedpfx Afouyiu No Touh Measuring range: X = 500 mm, Y = 400 mm, Z = 400 mm Manufacturer accuracy: ±2.9 µm + 0.3L/100 µm Drive: CNC-controlled, with fully automated measuring sequences Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Proven reliability: this used machine has been thoroughly inspected, tested and calibrated by our metrology specialists to ensure continued precise performance. Stable precision: Thanks to its granite construction and proven Mitutoyo design, the machine delivers highly accurate and repeatable measurements even after years of use. Automation and efficiency: The CNC control and Renishaw TP200 touch probe enable fully automated, efficient measurements, optimizing your production processes. Reliable investment: Even as a used machine, the Mitutoyo Euro C Apex 544 offers a cost-effective solution for companies looking for a tried and tested 3D coordinate measuring machine. This machine is the perfect choice for companies looking for a proven and tested quality control solution. Despite its age, it has been extensively tested and calibrated to ensure maximum reliability and precision in your production.

Condition: good (used), functionality: fully functional, Tested used 3D coordinate measuring machine Mitutoyo Euro C Apex 9166 - precision and durability We offer a used Mitutoyo Euro C Apex 9166 3D coordinate measuring machine on our marketplace, which was developed for large and complex workpieces. Despite its older age, this machine has been extensively tested and calibrated by our technicians to ensure that it continues to deliver accurate and reliable measurements. The Euro C Apex 9166 offers a generous measuring range and robust construction, ideal for companies looking for a tried and tested solution. Technical data: Measuring range: X = 900 mm, Y = 1600 mm, Z = 600 mm Accuracy: ±2.9 + 0.4 L/100 µm Drive: CNC-controlled, for fully automatic measuring processes Godpfx Afeuyiv To Teuh Touch probe: Renishaw TP200 with automatic probe change Software: Mitutoyo MCOSMOS Advantages: Tested and reliable performance: This used Mitutoyo Euro C Apex 9166 has been fully tested and calibrated by our experts. Despite the older year of manufacture, the machine guarantees precise and repeatable measurement results. Large measuring range: With a measuring range of 900 mm x 1600 mm x 600 mm, this machine is ideal for inspecting large workpieces. Robust construction: The granite construction of the base ensures stability and enables precise measurements even during intensive use. Efficient automation: The CNC control and Renishaw TP200 touch probe enable fully automated and repeatable inspection, increasing production efficiency. Cost-effective investment: This machine offers an economical solution for companies looking for a proven and reliable 3D coordinate measuring machine. This used Mitutoyo Euro C Apex 9166 is ideal for companies that need a reliable and powerful 3D coordinate measuring machine for large workpieces. Despite its age, it remains a first-class choice for precise and automated measurements as it has been thoroughly tested by our metrology specialists

Condition: good (used), functionality: fully functional, mileage: 125,000 km, power: 110 kW (149.56 HP), first registration: 07/2011, fuel type: diesel, color: white, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, Used truck ISUZU M 50 C 150 3-sided tipper, year 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5000 kg (C license), payload 2,500 Kg, air conditioning, ABS, Euro 5, 70% tires, mechanical spring suspension, electric mirrors + windows, radio, Km 125,000, good condition. Guedpeuiyalofx Af Toh INFO ENG: Used truck ISUZU M 50 C 150 3-sided tipper, first registration 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5,000 kg (license C), payload 2,500 kg, air conditioning, ABS, Euro 5, 70% tyres, mechanical leaf spring suspension, electric mirrors + windows, radio, 125,000 km, good condition.

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climate Testing Chamber, -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber volume: 335 liters Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Year of manufacture: 2002 Gjdpfxsuuif Ns Af Tsuh TK-11 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Vötsch VC 0150 Climate Test Chamber 0°C - +90°C Manufacturer: Vötsch Type: VC 0150 Climate test chamber Voltage: 230 V Rated power: 1.5 kW Volume: 1540 liters Temperature range: 0°C to +90°C Humidity: 10% to 98% Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor controller List price: €19,500 KK-09 Godpfx Asuuikfsf Tsuh You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, Year of construction: 2026, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, reverse speed: 14 mm/s, total length: 1,150 mm, total width: 850 mm, total height: 1,800 mm, Special Offer – 5% Discount Available! Hydraulic C-Frame Press – 250 kN (25.5 Tons) The Hydraulic C-Frame Press is a professional industrial machine designed for precise pressing, straightening, bending, assembling and forming operations. Its open C-frame construction provides excellent access to the working area, allowing convenient machining of larger workpieces and easy material handling from multiple sides. The rigid welded steel frame ensures maximum stability, durability and long service life. The precision hydraulic system provides smooth control of both pressing force and ram speed, delivering reliable performance and high machining accuracy. This versatile press is suitable for industrial production, maintenance departments, tool rooms, metalworking workshops and automotive applications. Main Features • Pressing force of 250 kN (approx. 25.5 tons) • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control • Smooth ram movement • Excellent access to the working area • Suitable for industrial and workshop applications • CE certified Technical Specifications Gusdjyr Ek Ropfx Af Toh • Pressing force: 250 kN (approx. 25.5 tons) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Ram stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm • Downward speed: 10 mm/s • Return speed: 14 mm/s • Motor power: 3 kW • Packed dimensions (L × W × H): 1150 × 850 × 1800 mm Applications • Pressing • Bending • Straightening • Assembly operations • Metal forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.