Used Köhler Arbeitstischat 1600 for sale (2,647)

Condition: refurbished (used), functionality: fully functional, load capacity: 10 kg, arm reach: 1,450 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 1600-10/1.45 IRC5 Controller - fully refurbished and with 6 months warranty - delivered into Europe duty paid so no additional costs on top Fgjdszcfa Tspfx Albog

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Fodpfxjzzwy Ij Albsgg Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) Fsdpfjyxdwdjx Albjgg • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Year of construction: 2011, condition: used, Suitable for automatically brushing (rounding edges or deburring) the teeth on HM circular saw blades. Accessories: Sawblade holder, Stepless variable speed control of the sawblade drive, Pre-selectable timer. Circular saw blade diameter: 1600 mm Fedju Dk Edjpfx Albjgg Power of geared motor: 0,1 kW Brush motor performance: 0,75 kW Connected load approx.: 400 V / 50 Hz Weight approx: 310 kg Dimensions W x D x H approx.: 2400 x 850 x 1550 mm colour: blue/grey

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or Fgsdpfxozgua Aj Albsg beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: excellent (used), Year of construction: 1988, Magnet table 1.800 x 450mm, cross travel 580mm. New CNC Fagor 8037M 2018. Paper filter with magnet separator Fedpfx Aotqt Idolbsgg

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 320 mm, feed length Z-axis: 450 mm, travel distance X-axis: 1,300 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 60 rpm, total height: 2,000 mm, total width: 2,100 mm, total length: 2,520 mm, table width: 360 mm, table length: 1,600 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, rotational speed (min.): 60 rpm, table load: 500 kg, overall weight: 2,800 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, space requirement width: 2,100 mm, space requirement length: 2,520 mm, space requirement height: 2,000 mm, warranty duration: 12 months, Equipment: documentation/manual, SALE - 5% OFF UNIVERSAL VERTICAL AND HORIZONTAL MILLING MACHINE This robust universal milling machine is equipped with vertical and horizontal ISO50 spindles. The complete vertical spindle head moves along the column guideways, while its adjustable angle enables machining in various positions. The machine is suitable for producing tools, fixtures, engine components and other precision parts. Automatic and rapid feeds on all three axes, servo drives and a digital readout ensure efficient, accurate and convenient operation. KEY FEATURES Vibration-damping cast-iron construction Vertical and horizontal ISO50 spindles Automatic feed on all three axes Rapid feed on all three axes Infinitely variable feed adjustment 10 Nm servo drives Digital readout (DRO) Large worktable with a 500 kg load capacity Hardened and ground gears for reduced operating noise Central lubrication system Adjustable vertical head angle Functional and intuitive control panel Protective guards compliant with current safety requirements Worktable guard available as optional equipment TECHNICAL SPECIFICATIONS Table size: 1600 x 360 mm Maximum table load: 500 kg Table swivel range: -45° to +45° X-axis travel: 1300 mm Y-axis travel: 320 mm Z-axis travel: 450 mm X-axis feed rate: 30-750 mm/min Y-axis feed rate: 20-500 mm/min Fjdpfxjyuculj Albegg Z-axis feed rate: 15-375 mm/min X-axis rapid feed: 1200 mm/min Y-axis rapid feed: 800 mm/min Z-axis rapid feed: 600 mm/min Number of T-slots: 3 T-slot width: 18 mm T-slot spacing: 80 mm Horizontal spindle taper: ISO50 Vertical spindle taper: ISO50 Upper ram travel: 550 mm Vertical spindle-to-table distance: 196-646 mm Horizontal spindle-to-table distance: 20-470 mm Vertical spindle speeds: 12 speeds, 60-1750 rpm Horizontal spindle speeds: 12 speeds, 60-1800 rpm Vertical spindle motor: 4.0 kW Horizontal spindle motor: 5.5 kW X-axis feed motor: 1.5 kW Y-axis feed motor: 1.5 kW Z-axis feed motor: 1.5 kW Servo drive torque: 10 Nm Machine dimensions (L x W x H): 2520 x 2100 x 2000 mm Weight: 2800 kg TRANSPORT We can arrange delivery of the machine to the customer. Transport costs are calculated individually according to the delivery location and specific transport requirements. Please contact our sales department to receive a transport quotation.

Condition: new, Year of construction: 2026, faceplate diameter 1600 mm swing diameter 2000 mm turning height 1600 mm control Fanuc 0i-D stroke of vertical slide 1000 mm tool holder 1 distance face plate/tool carrier 1065- 1865 mm vertical adjustment of the crossrail 800 mm workpiece weight 10 t faceplate turning speed range -stepless- 1 - 250 U/min feeds mm/min rapid traverse 10/12 m/min horizontal adjustment of slide -200 - +1125 mm adjustment speed of cross-rail 300 mm/min Fgedpfx Ajzzd R Tolbsg milling spindle - taper SK 50 KVA weight of the machine ca. 28,5 t This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH (Price without live tooling). Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Machine operates independently. Large format. Brushing table. Blasted for 59,000 hours. Fjdpfxjzdrnrj Albogg

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Fjdpjw Rqwtefx Albsgg

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,834 h, load capacity: 1,600 kg, lifting height: 3,400 mm, free lift: 1,800 mm, load center: 600 mm, fuel type: electric, mast type: free lift with telescopic boom, construction height: 2,300 mm, battery capacity: 465 Ah, battery voltage: 24 V, fork length: 1,150 mm, Stöcklin EFI 1600 Sit-down pallet stacker with initial lift. Perfect condition. Lifts 1600 kg. "2-in-1 machine" It can be used for daily handling of pallets up to 2000 kg, which can be lifted on the first lift. And in addition, it can be used as a stacker when you need pallets in racks or similar. Load capacity on forks: 1600 kg. With the initial lift, you can drive over uneven surfaces, e.g. level difference between 2 halls, door opening with drop, etc. In addition, you can drive with 2 pallets at the same time. Very easy to maneuver, nice ergonomic driving position and easy to get on and off. The machine is in perfect condition. Lifting height: 340 cm. Building height: 230 cm. (With lowered undercarriage) Year: 2006 Hours: 5834 Large battery: 24V 465Ah with 50% remaining capacity. Fgodpfx Asu T Ea Solbeg incl. charger. Transportation can be arranged.

Condition: used, Manufacturer : Venti Oelde Dust Cyclone, Dust Separator, HLZ-J 1600, used machine Manufacturer: HLZ-J 1600 Volume flow: 14,000 Bm³/h Suction side: 400 mm Fgedpfxszwxzrj Albog Height: 5853 mm Diameter: 1695 mm Year: 2013

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 640, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information. Additional equipment Fgsdpfx Ajyallqelbeg • Accessories: Chip conveyor Machine Benefits Technical Machine Benefits • Table size: 1800 x 810 mm • Allowed weight: 2000 kg • Automatic tool changer: atc 24 positions Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 1992, Four units of used Andritz Paladin pellet presses Fsdpfxjyrng Is Albjgg

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Fsdpfxezzwahe Albsgg Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm Fodpfsx D Nxzex Albsgg • Clamping Force: 3500 kN

Condition: like new (used), Year of construction: 2018, operating hours: 428 h, functionality: fully functional, Manufacturer: N&N Nadratowski Model: MIX-450EF Year: 2018 Condition: Used Serial Number: 1603 Stock Number: 3431 Mixer: paddle mixer, intermeshing Capacity: 450 litres Mixing speed: 5 - 40 RPM Infeed height: 1400 mm Fgodpfx Alszzyifsbeg Outfeed height: 700 mm Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 1000 x 1600 mm Weight: 650 kg With Mitsubishi PLC, touch screen and programming control Frequency controlled speed, front and reverse. Outlet into 200L tote bins. Only 428 working hours, machine is as new condition!

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Table load: 2000 kg Spindle speed range: 0 - 10,000 rpm Fgjdpfoyy Npnjx Albeg Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special features: • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 41,500 h, control type: CNC control, controller manufacturer: SIEMENS, sheet thickness steel (max.): 8 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 60 m/min, cutting speed: 1,200 mm/min, overall weight: 18,000 kg, total length: 7,600 mm, total width: 7,000 mm, total height: 2,500 mm, TRUMPF TRUMATIC 5000 punching machine, large format, in perfect technical condition. Fgsdpfey Rh E Nox Albjg

Condition: used, total length: 2,650 mm, total width: 1,150 mm, total height: 1,650 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 225 Fodpfx Aljzzlg Aobjgg - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 1600 - Distance between centres [mm]: 1050 - Bed width [mm]: 340 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 46 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Four-jaw chuck, Three-jaw chuck, Quick-change tool post, Fixed steady, Removable bed - Type of digital readout: Heidenhain - Transport dimensions: 2650mm x 1150mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2010, condition: ready for operation (used), A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2017. Documentation available. An on-site inspection is possible. Fgsdpfx Aloyviyrebsg

Condition: ready for operation (used), Year of construction: 2010, overall weight: 250 kg, total height: 1,294 mm, number of axes: 6, This 6-axis ABB IRB 1600 robot arm was manufactured in 2010. It features versatile mounting options including floor, wall, and inverted setups, and is compatible with IRC5 and OmniCore controllers. With a maximum arm load of 30.5 kg and a reach of up to 1.45 m, it's ideal for a variety of applications. Consider the opportunity to buy this ABB IRB 1600 robot arm. Contact us for more information about this machine. • Type: 6-axis industrial robot (supports up to 3 external axes via MultiMove; max 36 axes) • Maximum payload: 30.5 kg (with 1.2 m reach) / 20.5 kg (with 1.45 m reach) • Protection class: IP54 standard; IP67 optional (Foundry Plus) • Mounting options: floor, wall, shelf, tilted, inverted • Controller compatibility: IRC5 (Single, Dual, Compact), OmniCore (C30, C90XT, V250XT, V400XT) • Axis ranges: • Axis 1: ±180° • Axis 2: +136° / –63° (1.2 m) or +150° / –90° (1.45 m) • Axis 3: +55° / –235° (1.2 m) or +65° / –245° (1.45 m) • Axis 4: ±200° (default), max ±190° revolution • Axis 5: ±115° • Axis 6: ±400° (default), max ±288° revolution • Repeatability: • Position repeatability (RP): 0.02 mm (6 kg) / 0.02–0.05 mm (10 kg) • Path repeatability (RT): 0.06–0.19 mm Fjdpfxox D E Tnj Albsgg • Maximum joint speeds: • Axis 1: 150–180°/s • Axis 2: 160–180°/s • Axis 3: 170–185°/s • Axis 4: 320–385°/s • Axis 5: 400°/s • Axis 6: 460°/s • Wrist torque: Axis 4 & 5 ≈ 8.58 Nm; Axis 6 ≈ 4.91 Nm • Electrical: 200–600 V, 50/60 Hz; max power consumption 0.58 kW • Dimensions: Base 484 × 648 mm • Height: 1069 mm (1.2 m reach version) / 1294 mm (1.45 m reach version) • Operating temperature: +5 °C to +45 °C

Condition: used, first registration: 06/1993, Year of construction: 1992, Schäfer BTA 1600 Tank/Bitumen Trailer • Drum brakes • Leaf spring suspension • 2 x BPW axles • Permissible total weight: 18,000 kg • Unladen weight: 5,340 kg • Payload: 12,660 kg • Tire size: 365/80 R 22 Fgsdpfxjzb U H Te Albog • Tread depth: 14/14, 15/15 mm • Tank volume: 16,000 liters - German trailer! - Inspection and MOT test on request and subject to an additional charge: new! Errors and prior sale excepted!

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Fgjdpfxey I Ac Do Albjg

Condition: used, Year of construction: 1985, machine/vehicle number: 30522, sheet width:120 mm coil weight:75 kg Fodpfecxxq Ssx Albegg dimensions of the machine ca.:2,50 x 1,25 x 1,50 m