Used Hwacheon Hi- Tech 200B for sale (7,876)

Condition: used, power: 419 kW (569.68 HP), axle configuration: 6x6, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 67,500 mm, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, - Brake system Iveco X-Way AS300X57 Z/P HR ON+ Short Timber Truck, axle configuration 6X4 (with hydraulically driven front axle 6x6), tandem medium drive axle (HR), disc brakes, cab version Active Space, large driver's cab, rear air suspension, 12-speed automated HiTroniX transmission, engine 570 C13 Cursor 13 570 HP Euro VI, wheelbase 4,800 mm, AS cab with high roof, roof insulation for cab, electrically operated lifting roof transparent for MLL high roof, air suspension for cab, fog lights, front halogen headlights, electrically adjustable and heated mirrors, hybrid bumper, front underrun protection, static passenger seat, one-piece lower bed, double thermo insulated box, digital tachograph 4.0, electronic immobilizer and 2nd vehicle key, luxury driver's seat air-sprung, heated, 4-way adjustable, lumbar and headrest with integrated 3-point seat belt, 2 reinforced anti-roll bars on rear axle, designed for moderate climates, exhaust outlet to the left, 170 Ah batteries, horizontal batteries on frame, rear suspension without spacers, generator 2,160 watts (24 volts x 90 amps), 2-cylinder air compressor 630 cc, rear shock absorbers, trailer socket for 24-volt operation, 15-pin, rear axle ratio: 4.23, heated fuel prefilter with separator, adaptive cruise control (ACC), ECO-Switch to switch between Power and Eco mode to optimize Total Cost of Ownership (TCO) by fuel-optimized engine and transmission settings, driving style analysis (DSE), transmission software eco-roll freewheeling function, VDI interface (Vehicle-Data-Interface) for telematics services (FMS) version 3.0, preparation for toll system (OBU), preparation for telematics system (telematics box), hill start assist (Hill Holder), electronic stability program (ESP), lane departure warning system (LDWS), emergency braking assistant, HI-TRACTION, rocking mode (free swing mode), left and right luggage compartments, 15m tire inflation hose, headlamp protection grilles, fully automatic air conditioning, leather multifunction steering wheel, sun roller blind, auxiliary heater diesel/water 4KW, front axle 8,000 kg / 1st rear axle 10,500 kg / 2nd rear axle 10,500 kg, spare wheel, reinforced front anti-roll bar, reinforced parabolic spring on front axle, AdBlue tank 80 liters, 50 mm 190 kN Ringfeder trailer coupling, fuel tank 550 liters, CAN bus interface CAN-OPEN for body control, infotainment system incl. navigation, axle load indicator, holding effect of parking brake on front axle, LED tail lights, retarder/intarder for ZF transmission, side marker lights, tires 385/65 R22.5 - 315/80 R22.5, bumper painted in cab color, aluminum air tanks, horn behind bumper, transparent sun visor. SCHEMEL–SHORT TIMBER BODY Crane: Palfinger-EPSILON loading crane Y_CRANE_ON_2 M 12 Z91 Lhsdpfoyfu Rmox Ab Asn - Fully hydraulic timber loading crane Manufacturer: EBERT Dimensions: approx. 6,750 mm between bulkhead and crane - 4 ExTe bolsters D5 – adjustable with clamp fastener and lashing ratchets or support for load securing - with 8 ExTe stakes D5 – telescopic - with special Z-profile subframe 200 mm high, closed with checker plate in the center of the frame - Bulkhead welded construction with internal special aluminum profiles approx. 2,600 mm high - 4 x ¼ mudguards...

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. Lhsdpfx Abjxfaqwo Aon General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: used, mileage: 522,574 km, power: 419 kW (569.68 HP), first registration: 06/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, full service history, hydraulics, lane keeping assist, low noise, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, IVECO STRALIS ∗570∗ HI-WAY --- AS440S57T/P ===== - LEATHER SEATS Luxury - INTARDER - HYDRAULICS – STAND-ALONE AIR CONDITIONING - SPOILER PACKAGE with SIDE SKIRTS - ALCOA Aluminum Rims Special Equipment: - LEATHER SEATS with SEAT AIR CONDITIONING, SEAT HEATING, and LUMBAR SUPPORT - Driver and passenger seats with air suspension - HYDRAULICS 2-circuit / Tipping and sliding floor hydraulics Hydraulic connections in front of and behind the fifth wheel - LED ROOF-MOUNTED FLOODLIGHTS - XENON HEADLIGHTS - HEADLIGHT CLEANING SYSTEM - LED DAYTIME RUNNING LIGHTS - STAND-ALONE AIR CONDITIONING - AUTOMATIC CLIMATE CONTROL - INTARDER / RETARDER - SPOILER PACKAGE with SIDE SKIRTS - ALCOA ALUMINUM RIMS - SUN VISOR - MULTI-FUNCTION LEATHER STEERING WHEEL - RADIO-NAVIGATION / DISPLAY and TOUCHSCREEN Ledpokfqqmefx Ab Ajhn - Iveco original REFRIGERATOR (2x) ∗Vehicle had a maintenance contract with IVECO∗ Driver Assistance Systems: - Emergency Braking Assist - Brake Assist - Adaptive Cruise Control - Lane Keeping Assist - Electronic Stability Program ESP - Anti-Slip Regulation ASR - Anti-lock Braking System ABS Additional Equipment: - Euro 6 - Automatic Transmission - Auxiliary Heater - On-Board Computer - Cruise Control - Central Locking with Remote Control - Bed/Sleeper Cab - Auxiliary Headlights/Long-Range/Wide-Beam Headlights - Differential Lock - Aluminum Tank - Front Tire Size: 385/65R22.5 - Rear Tire Size: 315/80R22.5 - etc. ..... for further information / for more info Mobile No.: ..::: Please contact us before your visit, as the office is not always staffed :::.. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will take care of all customs matters for you. What to do with the used vehicle? ... If we reach an agreement, we will gladly accept it in part exchange. For export outside the EU, the statutory VAT must be deposited as a security. This offer is non-binding and subject to change. Errors and prior sale are reserved.

Condition: ready for operation (used), LINE TECH PE1.40200FR005.2.02.0F positioning unit SN:64714-9552, used, minor signs of wear, 100% functional, scope of delivery as per photos Lhsdpfx Abjrv Ta Hs Ajn

Condition: good (used), functionality: fully functional, The angle conveyor with steel hinges, 2 brake wheels and 2 swivel castors are for sale, the motor data can be found on the type plate. They are completely covered with a steel plate. A drawing with the dimensions is included in the advertisement and a video can be sent if required. The motor can be rotated faster or slower with the help of the FI. Well suited for the punching area Output height: 3100mm Useful width: 400 mm Total: 550mm Motor : 350mm Inlet: 300 mm x 410mm Belt speed const. 4m/min Lhjdor H Eckjpfx Ab Asn

Condition: used, 2 units single-stage screw clamping devices with Lhsdpfothtnwox Ab Aon exchangeable tension element thread inserts for M 85 and M100 with hydraulic aggregat

Condition: new, mileage: 50 km, power: 132.39 kW (180.00 HP), fuel type: diesel, Year of construction: 2022, Iveco Daily 35S18 Hi-Matic rigid box truck Year built: 2022 day registration Km: 50 new Engine: 3.0hpt 180hp euro6 Payload: 700kg Color: white Box truck with rear doors Cargo box dimensions: Length: 4.30m Height: 2.30m Lhodpfxjupvp Rs Ab Aon Width: 2,20m Options: - digital air conditioning - adaptive cruise control - navigation - camera - full led - power windows - electric mirrors - central locking - radio / bluetooth / usb - suspension seat - leather steering wheel - fog lights - multi-steer - armrest - etc. Price: 43,900 euros +btw = 53,119 euros all-in - Certified for sale + carpass - factory warranty More info 0473/19.99.85

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included. Ljdpeppwx Eofx Ab Ashn

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm Lhsdofu Nbbepfx Ab Ajn total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Year of construction: 2006, condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg Ljdpofw Rwmofx Ab Ajhn

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm Ledpfx Aofg E Hmeb Ashn capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models Lhsdjfg E Hpepfx Ab Asn a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m Lsdpfefgyifsx Ab Aohn 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams Ljdpfxsfgyigo Ab Ajhn as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 5,490 kg, lifting height: 6,000 mm, tire size: 12x16,5, number of seats: 1, Year of construction: 2019, machine/vehicle number: 2486188, Equipment: all wheel drive, cabin, pallet forks, Technical specifications Ledpfoy Urg Sjx Ab Aohn Year of manufacture: 2019 Engine: Diesel Working height: 6.00 m Reach: 3.06 m Max. lifting capacity: 2,500 kg Lifting capacity at lifting height: 2,000 kg Load capacity at max. reach: 750 kg Overall dimensions (L x W x H): 43.38 x 1.84 x 1.89 m Total weight: 5,490 kg Engine power: 55 kW (74 hp) Engine displacement: 2.5 l Travel speed: 20 km/h Fully functional, with general signs of wear and tear.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 3050 mm Working area Y: 1250 mm Working area Z: 180 mm 9.5 kW electrospindle Vertical drilling spindles: 12 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Blade for grooving in the X direction 4-position tool changer Rear 10-position tool changer Worktable with 6 rails, 6 TVN tables with suction cups 90 m³/h vacuum pump Software: Xilog Maestro Lhsdpfx Ajy Tb Ezsb Aen Laser positioning device Control panel Approximate weight: 2750 kg No additional components included!

Condition: good (used), Year of construction: 2005, operating hours: 76,988 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, plate length: 600 mm, plate height: 670 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, Equipment: documentation/manual, ENGEL Victory 200/80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control System: CC100 Year of Manufacture: 2005 Operating Hours: 76988 h Technical Data - Clamping Side Clamping Force: 800 kN Platen Size h x v: 670 x 600 mm Minimum Mold Height: 250 mm Maximum Mold Height: 700 mm Opening Stroke: 450 mm Ejector Stroke: 100 mm Ejector Force: 40 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 675 kg Technical Data - Injection Side Screw Diameter: 30 mm Injection Volume: 99 ccm Injection Pressure: 1450 bar Screw Length: 20 l/d Screw Stroke: 140 mm Plasticizing Rate: 17 g/s PS Free Injection Flow Rate: 150 g/s PS Number of Heating Zones: 4 Nozzle Length: 200 mm Dimensions & Weight Machine Dimensions L x W x H: 4.05m x 1.93m x 2.2m Total Weight: 5200 kg Lsdpsz Ayttofx Ab Ajhn Equipment Screen text: German CEE socket 16A Core pull hydraulically 1x Machine including conveyor belt Machine including handling system Machine with water manifold Machine without material hopper Leveling elements Schuko socket 10A Technical Data - Handling System Machine Type: Linear handling system Manufacturer: Engel Control System: ER-HLI 31 VC Year of Manufacture: 2005 Handling System Weight: 2 kg Screen Text: German Total Weight: 250 kg

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Stock number: 1172 Lhodpfxez Nxxao Ab Asn

Condition: good (used), Year of construction: 2020, The material separator from Koch Technik is for sale. The scope of supply includes: the price is per unit, 3 units in stock. Lsdez Nxwvjpfx Ab Aohn 2 x KEM dosing station, version 3.7 – material locking mechanism – level sensor – hopper – pre-mixer, type G 1 x KEM Touch Material separator complete with the components listed above. Mixer, type G: complete with motor and container. Supply voltage: 230V.

Condition: used, all stainless steel water circulation Lhsdpfx Abjz Nxgdj Aon net belt length 10.000 mm net belt width 1.400 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.000 x 2.100 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 1.200 mm distance between flights: 200 mm height of flights: 85 mm

Condition: used, D+P Dosing and Testing Technology 05-755-011, used industrial spare part Lsdpfx Absz N Hgxs Ajhn Used industrial spare part from Dosing and Testing Technology GmbH. Manufacturer: Dosing and Testing Technology GmbH Part number: 05-755-011 Condition: Used Quantity: 3

Condition: new, functionality: fully functional, overall weight: 100 kg, total height: 1,660 mm, Year of construction: 2026, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V Lodpfx Ajzpwmdob Ajhn - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Lsdeznr Slopfx Ab Aehn Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: used, mileage: 800,000 km, power: 338 kW (459.55 HP), first registration: 01/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, IVECO STRALIS HI-WAY 460 – ECOSTRALIS STANDARD SEMI-TRACTOR – RETARDER – STAND-ALONE AIR CONDITIONING – ALCOA – 2 TANKS – VEHICLE HISTORY – GERMAN VEHICLE – FROM FIRST OWNER – VIDEO AVAILABLE UPON REQUEST – WORKSHOP-MAINTAINED, WELL-MAINTAINED VEHICLE – WORKSHOP REPAIR HISTORY AVAILABLE VEHICLE EQUIPMENT – STANDARD SEMI-TRACTOR – ECOSTRALIS 460 – AUTOMATIC TRANSMISSION – RETARDER – CRUISE CONTROL – STAND-ALONE AIR CONDITIONING – AUXILIARY HEATER – AIR CONDITIONING SYSTEM – ALCOA ALUMINUM WHEELS – DIFFERENTIAL LOCK – ONBOARD COMPUTER – HANDS-FREE SYSTEM – 2 XL BERTHS – SMALL REFRIGERATOR – COMFORT SEATS / SEAT HEATING / SEAT VENTILATION – ROOF-MOUNTED SPOTLIGHTS – 2 TANKS – ADBLUE – FRONT AXLE: LEAF SPRING SUSPENSION – REAR AXLE: AIR SUSPENSION ADDITIONAL INFORMATION – TIRE SIZE FRONT: 385/55 R22.5 – TIRE SIZE REAR: 315/70 R22.5 – TIRES IN GOOD CONDITION – VEHICLE IMMEDIATELY AVAILABLE – VEHICLE IMMEDIATELY READY FOR USE – PERMISSIBLE TOTAL WEIGHT: 18,000 KG – EXPORT / NOTE EXPORT SALES ONLY WITH A DEPOSIT MIN. EUR 500 – EUR 2,000 EXPORT SALES ONLY WITH DEPOSIT MIN. EUR 500 – EUR 2,000 EXPORT REGISTRATION EXW POSSIBLE WITHIN 10 MINUTES (AUTHORIZED EXPORTER). Lhodpfx Aozbfzhjb Aen VEHICLE RESERVATIONS SHOULD ONLY BE MADE IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. SUBJECT TO CHANGES, ERRORS AND PRIOR SALE. LEGAL INFORMATION THIS AD DOES NOT CONSTITUTE A BINDING OFFER IN THE SENSE OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY TO INITIATE A CONTRACT. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY SUBJECT TO OUR TERMS AND CONDITIONS.

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Lsdez Iqlbopfx Ab Aehn Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request