Used Gea Tuchenhagen Vanne Papillon for sale (2,063)

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Nedpfovr E Edjx Afajcr

Condition: used, Year of construction: 2006, functionality: fully functional, Item: D-8700-GEA-Heat Exchanger Stainless Steel Heat Exchanger VT20 COL-S-10 Pressure: -1 / 6.0 bar Ncodpfsw T Tk Uex Afasr Temperature: 0.0 / 100 °C Volume: 11.14 Year: 2006 Food industry

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Ncsdpfxsx Antuj Afaer Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: used, Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again. Capacity: 350 hl/h Nodpexbn Ucsfx Afascr Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement Features: 1x plate heat exchanger, 1 tube heat exchanger, 1x hot water pump, 2x beer pump

Condition: excellent (used), Year of construction: 2016, GEA Niro Ariete NS2006P piston homogeniser Ncsdpfx Afsw Ulc Ejaer Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

Condition: good (used), Year of construction: 2005, GEA Niro NS2006P piston homogeniser Ncedpsw Ulcrefx Afaor Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph

Condition: excellent (used), GEA OPF600 OptiFlour preduster. Has come as part of a 600mm coating line from a meat-free factory. All other machines available to make a line. Njdpfx Afev Ihnyoajcr

Condition: excellent (used), GEA OptiCoater 600 from meat-free factory. Was coating formed mock chicken products. Other machines from the same line available. Ncedew A Ax Uepfx Afaer

Condition: excellent (used), GEA OptiCoater 600 batter enrober. Top specification enrober available for immediate sale. Njdpjv Su Inofx Afascr

Condition: good (used), 3m x 1000mm thermal oil fryer with teflon infeed and top hold down belt. Nodpoq Iq Nbofx Afajcr

Condition: excellent (used), Year of construction: 2014, Rarely available for sale, GEA Comas Tartomatic 1000 in beautiful condition. Has not been used very much. Comes with many accessories as shown in the photographs. Ncodpsvd Elnefx Afajr

Condition: excellent (used), OptiCoater 600 in lovely condition. Perfect for high throughput coating lines. Ncedpjv Ig Rgefx Afaor

Condition: good (used), 600mm MultiFormer direct from meat-free factory, fitted with optional BridgeBreaker. Other 600mm machines available from same line. Ncedsv H D N Dspfx Afaor

Condition: good (used), GEA Aquarius CX360 bagging machine direct from salad packing line. Nice condition. Nedpfx Afewztmteascr

Year of construction: 1998, condition: like new (used), GEA WetCoater 600 batter enrober. 600mm wide weir type batter enrober. Ncsdeigru Djpfx Afaor

Condition: excellent (used), NH3 (ammonia) net belt width 600 mm spiral belt with 19 tiers 150 kW product height: ± 55 mm Belt length 290 m with belt washing systems Ncodpsiimu Ijfx Afajr

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Ncsdpfjigruysx Afajr

Condition: ready for operation (used), Model: KAPRE 2500 Machine no: 463 Edge press for solid wood stripes Heat in the plate Ncsdpfxoma Ayre Afajr Max width of workpiece: 50 mm Length: 2500 mm Stock no: 2001658

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The GEA CFS Autogrind 280 is a powerful industrial grinder built for high-performance applications, particularly in meat processing. Designed to work with frozen blocks up to -25°C Key Features: Enhanced Power: The 117 kW motor delivers increased grinding performance, enabling faster processing of both frozen and fresh meat blocks. Processes frozen blocks at temperatures as low as -25°C without compromising quality or texture. Suitable for a variety of raw materials, including beef, pork, poultry, and fish. The upgraded motor supports even higher production rates, making it ideal for large-scale industrial use. Features a 280 mm throat with robust cutting plates and knife options to ensure uniform particle size. Suitable for fine or coarse grinding, depending on your needs. Integrated block pusher and feeding system reduce manual labor and improve efficiency. Made from stainless steel for easy cleaning and compliance with stringent hygiene standards. Smooth, crevice-free surfaces minimize contamination risks. Minimizes heat generation during grinding to maintain product integrity and comply with food safety regulations. Njdpevt R A Dofx Afajcr Safety interlocks and overload protection mechanisms safeguard both the operator and the equipment. Intuitive control panel for easy operation and monitoring. Despite its high power, the design is optimized to consume energy efficiently during continuous operation. Processes frozen and fresh meat for various end products such as: Minced meat Burgers Sausages Nuggets Other meat-based products This model is an excellent choice for high-demand production environments requiring consistent quality and reliability.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Nedoip Utaspfx Afajcr Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Complete Ammonia Refrigeration Installation: Type: Reciprocating Compressor Refrigeration System V1 412 E and VF 612 E Year of manufacture: 2008 Cooling capacity: 760 kW Refrigerant: Ammonia NH3 / R717 Permissible operating pressure: low-pressure side -1/12 bar, high-pressure side -1/17 bar The cooling installation comprises: - 2 GEA Grasso reciprocating refrigeration compressors, consisting of: (1x) Grasso 612E package and (1x) Grasso 412E package - EM Polar pressure vessel, type: DM1600 - Kühlturm GmbH evaporative condenser, type: KIV 2/12-28-12, 2 - Switchgear and control cabinets (2 units) - 3 pallets with valves, plus additional spare parts Grasso 612E package: - 1 unit Grasso/GEA piston compressor, type 612E - Leroy Somer electric motor, 200 kW / 1468 RPM - Dimensions: 3200 mm x 1900 mm x 2150 mm - Cooling capacity: 418.5 kW at -10°C / +40°C - Year of manufacture: 2008 Grasso 412E package: - 1 unit Grasso/GEA piston compressor, type 412E - Leroy Somer electric motor, 132 kW / 1468 RPM - Dimensions: 3200 mm x 1900 mm x 2150 mm - Cooling capacity: 325 kW at -10°C / +40°C - Year of manufacture: 2008 EM Polar pressure vessel: - 1 unit EM Polar pressure vessel, type DM1600 - Capacity: 9580 liters - Dimensions: 5200 mm x 1650 mm x 1900 mm - Empty weight: 2400 kg Nsdpfxoxg Ruio Afascr - Year of manufacture: 2008 Kühlturm GmbH evaporative condenser: - 1 unit evaporative condenser, type KIV 2/12-28-12, 2 - Dimensions (two parts): 6900 mm x 2500 mm x 2500 mm and 3200 mm x 2500 mm x 2150 mm - Cooling capacity: 1098 kW - Year of manufacture: 2008 Further information available on request.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, GEA Niro Soavi 3206 L Separator Manufacturer: GEA Niro Soavi S.p.A. Model / Type: 3206 L Serial Number (S.N.): 3812 Year of Manufacture: 1999 Maximum Working Pressure: 150 MPa (1500 bar) Nominal Capacity: 40 dm³/h (40 liters per hour) Nedpfsxb D S Dox Afajcr

Year of construction: 2001, condition: excellent (used), Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of manufacture: 1978 bowl speed: 3.300 rpm Commissioning until: 2004 Field of application: In the production of base oils for the removal of solid particles. Decanters were taken out of operation after a production changeover in 2004 and is therefore fully functional. Njdpfx Afed Rwwxsajcr

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, Discover the GEA-CFS SuperFry 5000/650, an industrial fryer specially designed for large-scale continuous frying operations. Its stainless steel design guarantees robustness and durability, making it ideal for demanding food production environments. Thanks to its automated conveyor, it efficiently handles large quantities of food, ensuring even, precise cooking of products. What's more, the SuperFry is equipped with advanced control and safety systems. It allows precise adjustment of passage speed, ranging from 1.2 to 15 m/min, and frying time, from 20 to 250 seconds. As a result, it offers exceptional flexibility to adapt to the specific needs of each production run. In addition, optimized sediment management and oil circulation contribute to superior end-product quality. In terms of technical features, the machine has a power rating of 313 kW and operates at 3 x 400V, 50Hz. Its minimum oil volume is around 1,009 liters, with an oil level 2 cm above the conveyor. Weighing in at 4,000 kg, it is also equipped with electric elevators, a circulation pump and a sediment removal system. Finally, the 16 A amperage requirement testifies to its energy efficiency. This makes the SuperFry 5000/650 the ideal solution for companies wishing to optimize their frying processes while guaranteeing impeccable food quality and safety. Technical specifications: Manufacturer: GEA-CFS Type: SuperFry 5000/650 Ncedpfx Afou Hhvfeasr All stainless steel Capacity: 3 x 400V, 50Hz Power rating: 313 kW Adjustable speed Min. oil volume at 2cm oil level above conveyor: ± 1.009 L Weight: 4,000 kg Amperage: 16 A Frying time: 20-250 sec Conveyor speed: 1.2-15 m/min Electric elevators, circulation pump, sediment removal

Condition: used, functionality: fully functional, overall weight: 2,659 kg, input frequency: 50 Hz, The Koppens BR 4500 600 fryer is the ideal solution for companies looking to improve their production efficiency. It guarantees consistent results and high quality frying. Thanks to its robust design, it can handle both small and large quantities of product, making it an asset for large production lines. What's more, the fryer features a precise control system that adjusts conveying speed according to specific needs. This makes it possible to adapt to different types of production while maintaining a constant level of oil, helping to improve product quality. More info: This fryer is easy to maintain and can be easily integrated into any production line. It also guarantees operator safety, while complying with the strictest hygiene standards. By using this equipment, companies can not only increase productivity, but also reduce raw material losses. This machine combines performance, durability and excellent yield, making it an essential choice for the food industry. Technical specifications: Njdpfxsu Hinio Afaocr Type : BR 4500/600 Manufacturer: KOPPENS / GEA Power: 122 kW Voltage: 380 V. Frequency : 50 Hz. Weight : 2650 Kg. Amperage : 186.9 A Conveyor speed : 1.02 - 10.8 m/min. Maximum oil level (above conveyor) : 20 mm.