Used Ermak Hgd 3100 X 10 for sale (76,439)

Year of construction: 1994, condition: excellent (used), 1 used steam boiler ----- manufacturer : Jumey heating surface approx. : 40 qm Lrsdpfjikvdisx Afaok capacity max : 2.000 kg/h max. allow. working pressure : 10 bar so far operated with : 5,0 bar water contents low level approx. : 3.540 l water contents full approx. : 4.750 l year of construction : 1994 equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, feed water pump and the existing fine and coarse fittings.

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Lrjdpowpku Djfx Afask Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: used, Year of construction: 2010, Manufacturer: Richter Lunetten Ledpfx Afswrq Szoaork Type: Prism Block 10-3 Year of manufacture: 2010 Min diameter 50 mm Max diameter 400 mm Work load each unit 10 Ton Height adjustment 100 mm Prism angle 120 degrees New price EUR 60,000 Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 1200 mm Width 800 mm Height 800 mm Weight 800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 14,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 5,000 mm, total height: 4,900 mm, total length: 22,000 mm, table length: 14,000 mm, table width: 2,000 mm, table load: 50,000 kg, FP model, ideal for a wide range of applications involving medium to large-sized components. Floor-type milling and boring machine - High dynamics with traverse speeds up to 35 m/min - INA linear guideway system - Hydro-mechanical clamping slides - Orthogonal milling head enables machining at any desired angle Technical data: - X-axis travel: 14,000 mm - Y-axis travel: 2,600 mm - Z-axis travel: 1,500 mm Lrjdpovn S E Nefx Afask - Table length: 14,000 mm - Table width: 2,000 mm - Table load capacity: 50,000 kg - Spindle power: 43 kW - Spindle speeds: up to 5,000 rpm - Spindle taper: ISO 50 / BT / MK - X-axis feed rate: 35,000 mm/min - Y-axis feed rate: 35,000 mm/min - Z-axis feed rate: 35,000 mm/min - Automatic orthogonal milling head positioning: 1° increments - Operating hours: 3,500 h - Machine length: 22,000 mm - Machine width: 5,000 mm - Machine height: 4,900 mm - Machine weight: 31,000 kg

Condition: good (used), “WMG WM 6,3 / 8,0 / 6,3 x 10 – 3 Rolls Crusher” for Sale Manufacturer: WMG Westfälische Maschinenbau Gesellschaft mbH Lrjdpfjgtxnrsx Afaok Type: WM 6,3 / 8,0 / 6,3 x 10 Roll Width: 1.000mm Electrical Motors: Included

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Ledpfskh Niqsx Afaerk Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: new, first registration: 05/2018, Year of construction: 2018, KRONE turntable - Jumbo drawbar trailer with swap body 15 units available: from year of manufacture 2012 to 2018!! Prices: from €3,900 to €7,900 net – incl. new MOT certificate! • ABS • Disc brakes • BPW – ECO Plus – axles • Full air suspension • Lift and lower system • LED rear lights • Drawbar adjustable in length by approx. 600 mm • Tyre size: 445/45 R 19.5 Lrjdpfxjwmpkxs Afaek • Good tyres! • Gross vehicle weight: 18,000 kg • Unladen weight: 2,900 kg • Body height: 1,002 mm! - New MOT / technical inspection! - Ready for use Errors and prior sale excepted! = Further information = Payload: 18,000 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch Lredpfopxmxcox Afajk - cutting line lighting

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm Lrjdpfx Aegyd T Ejfaok max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Condition: used, mileage: 359,980 km, power: 257 kW (349.42 HP), first registration: 11/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, * Fahrgestell, 10 x am Lager, 6x2, 310,320,350 TGA, Preis ab 5900 Euro netto * Radstand 3,90 m * Getriebe automatik * Klima * Federung: Blatt/Luft /Luft * Sonneblende * Rundumlicht * Zentralschmierung * Hydraulikpumpe * Liftachse * Lenkachse Ledsg U T Afopfx Afasrk * Auspuff hochgezogen * Sitzheizung * el. Fensterheber * egel * Tempomat * 2- Sitzer * Tacho manuel * Reifen 315/80R22,5 ca. 20-20-10% * Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf to-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, Verkauf nur an Gewerbe Besichtigungen nur nach Vereinbarung, WhatsApp

Condition: used, machine/vehicle number: 16515, Year of construction: 2018, operating hours: 5,100 h, load capacity: 1,000 kg, lifting height: 5,000 mm, free lift: 1,640 mm, load center: 600 mm, construction height: 2,200 mm, fork length: 1,200 mm, enginetype: Electric, manufacturer: Still Lsdpfx Ajxd Ir Tefaork

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine. No.: 1413 General / technical data: used vertical hydraulic indoor rasping machine with up to 3 rasping points in a ready to use condition tractive force: 13000 KG (maximum) room length: 1200mm Raeumstellen: 3 pieces Spacing between the racks: 100mm Diameter of the pulling head: Ø 85mm passage width between the cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1150 x 1500 x 3725mm (tool feeder extended) Lrodpsdbmgmofx Afaok Power supply / connected load: 380Volt 50HZ / 7,5KW Accessories / special equipment: The drawbridge of the machine has 3 space tool holders, the tool table has 1 space (changeable). The tool clamping system as well as the tool feeder is provided for a spring-mechanical locking (DIN 1415). The machine has an automatic tool feeder, the existing tool feeder is also available for only 1 tool (middle space). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production with medium batch sizes. The machine has

Condition: used, functionality: fully functional, OMAG Hydraulic Shear 3000 x 10, motorized back gauge, throat depth 200 mm, dimensions: 345 x 210 x 215 (h) cm, weight: 10,000 kg Lrjdpfxowvqkro Afaok OMAG Hydraulic Shear 3000 x 4, motorized back gauge, throat depth 200 mm, dimensions: 340 x 135 x 150 (h) cm, weight: 4,000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 576 m³/h, pressure (max.): 10 bar, noise level: 63 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, New Airpress screw compressors 7.5 kW / 10 HP Capacity 960 liters per minute Direct drive With dryer On 500-liter tank Made in the EU 2-year warranty Available from stock Lrsdpfx Aoxq Rmmsfajk

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Weight: 2t Ledpfx Aoixntwsfaork Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Year of construction: 1962, condition: good (used), machine/vehicle number: 1083, Broaching Machine - Vertical Manufacturer: Rausch Type: RS10/915 Machine number: 1083 Year of manufacturing: 1962 Force: 10 Tons Lrsdpfx Asfc T Euefajk Stroke: 915 mm System DIN 1415 With pedestal for upper-floor positioning

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Ljdpfx Aet Dwb Defajrk Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Year of construction: 1991, condition: good (used), machine/vehicle number: nn, Broaching Machine – Vertical Lrsdpfefc T Ewex Afaok Manufacturer: Locher Model: RWIL 10 x 1250 Year of manufacturing: 1991 Force: 10 Tons Stroke: 1.250 mm Area required: approx. 170 x 150 cm With automatic lead Magnetic chip-conveyor

Condition: used, machine/vehicle number: 16524, Year of construction: 2018, operating hours: 4,005 h, load capacity: 1,000 kg, lifting height: 5,000 mm, free lift: 1,640 mm, load center: 600 mm, construction height: 2,200 mm, fork length: 1,200 mm, enginetype: Electric, manufacturer: Still Ledpfx Afjxd Ix Teajrk

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Lredpfoxtcz Ijx Afajk Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.

Condition: used, Year of construction: 1998, total length: 3,350 mm, total width: 2,180 mm, total height: 2,780 mm, Weight: 9.000 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 230 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Crowning system: None Lredpoyrpvksfx Afask - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3350mm x 2180mm x 2780mm (l x w x h) - Transport weight [kg]: 9000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg Lrsdpfjxn U Rqex Afaok OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6430025, functionality: fully functional, stroke length: 215 mm, overall weight: 10,000 kg, controller model: Cybelec ModEva 12 CNC, bending force (max.): 150 t, working length: 3,100 mm, TECHNICAL DETAILS Working length: 3,100 mm Bending force: 150 t Maximum stroke: 215 mm Descent speed: 190 mm/s Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Control: Cybelec ModEva 12 CNC CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Weight: 10,000 kg Main motor power: 11 kW Total connected load: 15 kW Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Nominal pre-fuse current: 35 A Ljdpfxsyyb D Rs Afaork Hydraulic operating pressure: max. 300 bar Pneumatic operating pressure: max. 8 bar Overrun distance: 9 mm EQUIPMENT Hydraulic upper clamp: RFA Hydraulic lower clamp: WILA 13 mm Complete tool set (model: P5)

Condition: used, We are offering used lockers for sale. TECHNICAL DATA Width: 1,200 mm Height: 1,800 mm Depth: 500 mm Colour: Light grey Condition: Used PRICE €70.00 net Lodpfoy Eqc Djx Afajrk €83.30 gross incl. VAT TIERED PRICING (unit prices) 1 - 5 units: €70.00 net 6 - 10 units: €66.50 net 11 - 25 units: €63.00 net from 26 units: €59.50 net Available quantity: 105 units YOUR CONTACTS AT DLK: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. Collection is possible for this item. Delivery or shipping can be arranged at additional cost. The extra charges depend on the delivery location and volume of the shipment and can be provided upon request. PROJECT PLANNING Our sales team is happy to provide you with a non-binding, customised quote tailored to your requirements. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, functionality: unexamined, Year of construction: 2005, Edward Pearson / Bystronic PR 100x3100 press brake (2005) Lrjdpfey Duvhsx Afask