Used Dinse Welding Cable for sale (8,757)

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt Iiodpfsxaatnex Apcjg - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 500 mm table load 300 horizontal kg table load 150 vertikal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Features: - The table can be tilted and locked at angles ranging from 0° to 90° - Manual tilting Iiedpfxjxabl Se Apceg - Start/stop via a foot switch that can be used from any location - Selectable rotation direction: clockwise/counterclockwise - Rotation time adjustable - Welding machine controlled via control unit - 350-amp ground connection Scope of Delivery: - Control unit (integrated) - Foot switch THE ROTARY TABLE HOUSING MUST BE CONNECTED DIRECTLY TO THE BUILDING GROUND! CAUTION!! Vertical load limit: 150 kg only

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display Ijdoxabm Nepfx Apcsig

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction Iijdpfxexaal Rs Apcog . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Condition: refurbished (used), Power at 50%: 25kVA Short circuit-current: 22,4kA Electrode force: 17-178daN Throat depth: 180-500mm --- Iiodpfez Alfnex Apcsg Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), pneumatically operated, water-cooled spot welding pliers with manual control valve Manufacturer: DALEX, Type 3238 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 500 mm with double-acting cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke 0-25 mm Ijdpfx Ajz Ak H Depcoig with universal joint suspension and clamping bow 10 m connection cable with control cable also included: 1 piece DALEX synchronous control unit RS 12 with 3 m connection cable and 32 A CEE plug

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LP20250813JWL-1, type of input current: AC, total height: 900 mm, total width: 730 mm, total length: 980 mm, input voltage: 220 V, overall weight: 190 kg, type of cooling: water, sheet thickness aluminum (max.): 3 mm, laser power: 1,500 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, compressed air connection: 15 bar, Equipment: type plate available, This brand-new 2025 handheld fiber laser welding machine is offered in unused condition with 0 working hours and is ready for immediate operation. Designed for high-speed, high-precision welding, it delivers clean, strong welds with minimal heat distortion and excellent finishing quality. Compared to traditional MIG/TIG welding, this laser welding system offers significantly faster production speeds, reduced post-processing, lower consumable costs, and easier operation. The machine is compact, user-friendly, and suitable for both experienced operators and first-time users. Machine Condition: Year of manufacture: 2025 Condition: Brand new / unused Working hours: 0 hours Location: Portugal Availability: Immediate delivery Documentation included Ijdpfoyztpbex Apcsig Technical Specifications: Laser power: 1500W Laser type: Fiber laser Welding mode: Handheld Cooling system: Industrial water cooling Power supply: 220V Wavelength: 1070 nm Welding thickness: up to 4 mm (depending on material) Operation mode: Continuous / Pulse (depending on configuration) Welding speed: up to 4x faster than conventional TIG welding Suitable Materials: Stainless steel Carbon steel Aluminum Galvanized steel Advantages: High welding precision Minimal thermal deformation Clean weld seams with little or no finishing required Low maintenance High production efficiency Ideal for industrial fabrication, metal furniture, automotive, and sheet metal applications Videos, additional photos, and live demonstration available upon request.

Condition: excellent (used), Fronius TransPuls Synergic 5000 – 500 A MIG/MAG pulsed arc welding machine, water-cooled For sale is a powerful Fronius TransPuls Synergic 5000 industrial welding system with a separate wire feeder, water cooling, and a trolley. The digital Synergic control allows for convenient adjustment of the welding parameters. Thanks to various pre-programmed characteristic curves, the system – with the appropriate wire, shielding gas, and accessories – is suitable for welding steel, stainless steel, and aluminum, among other materials. A special feature is the water-cooled Fronius JobMaster welding torch. This torch has a digital display and enables the display and adjustment of important welding parameters directly on the torch. Equipment: * Fronius TransPuls Synergic 5000 Comfort * Wire feeder Fronius VR 4000 * Water cooler Fronius FK 4000-A * Water-cooled Fronius JobMaster welding torch * Digital display and adjustment options directly on the torch * Ground cable * Cylinder transport trolley with cylinder holder * Wire spool holder * Digital Synergic control * MIG/MAG standard and pulsed arc welding * Various pre-programmed material characteristic curves Technical data: * Manufacturer: Fronius * Type: TransPuls Synergic 5000 * Mains connection: 3 × 400 V * Mains frequency: 50/60 Hz * Maximum welding current: 500 A * Duty cycle: 500 A at 40% * Continuous operation: approx. 360 A at 100% * Wire feeder: VR 4000 * Water cooling: FK 4000-A * Cooling capacity: 2 kW * Protection class: IP23 * Suitable wire diameters: 0.8 / 1.0 / 1.2 / 1.6 mm * Material programs for steel, CrNi/stainless steel, aluminum, cored wire, and CuSi3, among others The device is in very good condition. An inspection is possible by prior appointment. Iiodpfjz Ag Idsx Apcjg Shipping is possible. Please contact me if you have any questions or are interested. The sale is made commercially. The stated price includes statutory VAT. You will of course receive an invoice with VAT shown. Subject to change, prior sale, and errors.

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle Iijdpfjdzqbvsx Apcog 150 amps = 100% duty cycle Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug - 5 meter WIG hose assembly - HF ignition - Continuous current control and current increase - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Weight: approx. 200 kg In good condition

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters Iodpfx Apedzqacjcsig - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless Iijdpfx Apod N E Rvscog - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Ijdpfx Apjw U Ezzscjig Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: used, machine/vehicle number: XLER6X20005202884, mileage: 987,869 km, power: 456 kW (619.99 HP), first registration: 07/2008, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, wheelbase: 6,220 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, total length: 120,000 mm, total width: 26,000 mm, total height: 40,000 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2008, Equipment: air conditioning, differential lock, electric window regulation, parking heater, power mirror, retarder, = Additional options and accessories = - Cushioned seat - Heated exterior mirrors - Locking differential - Power take off (PTO) - Preparation OBU - Sleeping cabin - Sun visor = Remarks = Structure Construction year: 2008 Ijdpfju R Ny Hex Apceig = More information = Technical information Number of cylinders: 8 Engine capacity: 15.607 cc Axle configuration Suspension: leaf suspension Front axle: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 55%; Tyre profile right: 55% Rear axle 1: Tyre size: 315/80 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 55%; Tyre profile left outer: 55%; Tyre profile right outer: 55%; Tyre profile right outer: 55% Rear axle 2: Tyre size: 315/80 R22.5; Double wheels; Lift axle; Max. axle load: 7500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 12.320 kg Carrying capacity: 15.680 kg GVW: 28.000 kg Functional Make of bodywork: NCH 30 TON Tipper: Back Identification Registration number: BV-FN-24

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. Isdpjzcyrwsfx Apcsig The shears are brand new, manufactured in 2024, but have never been used. Includes a complete service kit.

Condition: excellent (used), mileage: 635,300 km, power: 272 kW (369.82 HP), first registration: 08/2016, fuel type: diesel, tire size: 385/55/22.5, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: intarder, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 11, emission class: euro6, suspension: steel-air, total length: 7,170 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, fog lights, onboard computer, power assisted steering, soot filter, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - High beam headlights - Air horn - Particulate filter - Radio/CD player - Beacon light - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system - Towing jaw = Additional Information = Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Iiedpfx Apew Hqvcocsg Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/55/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf spring Rear axle: Tyre size: 315/60/22.5; Twin wheels; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Weights Empty weight: 8,900 kg Payload: 11,600 kg Gross vehicle weight (GVW): 20,500 kg Functional Body brand: HTS 1425.5.130 cable system 14 tons Condition Technical condition: very good Visual condition: very good Identification Registration number: 21-BHN-3 DAF CF370FA 4x2 WITH HTS 1425.5.130 CABLE SYSTEM 14 TONS EURO 5 | L PACKAGE | 370 HP DRIVE 4X2 WHEELBASE 450 CM DAY CAB WITH AIR CONDITIONING, RADIO/CD PLAYER, 27MC MANUAL TRANSMISSION AIR HORN, BEACON LIGHT, TRAILER COUPLING, TOOLBOX HTS 1425.5.130 CABLE SYSTEM 14 TONS CONTAINER LOCKING SYSTEM CENTRAL LUBRICATION SYSTEM IMMEDIATELY AVAILABLE FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO WATCH VIDEOS OF OUR TRUCKS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, mileage: 408,751 km, power: 302 kW (410.61 HP), first registration: 06/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 5,650 mm, fuel: diesel, brakes: engine braking, color: red, gearing type: automatic, emission class: euro6, suspension: other, total length: 8,230 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, traction control, trailer coupling, = Additional Options and Accessories = - Remote central locking - Tow hitch - Hub reduction - PTO - Radio - Rear view camera - Sun visor - Spotlights - Toolbox - Central lubrication system = Notes = Ginaf X6 3332CHS 6x6 with hydraulically driven front axle. Front leaf spring suspension / rear hydraulic suspension. Widely used. Crane. Palfinger epsilon Type: Q150Z95TR 3 hydraulic sliding sections (1 x hydraulic on the main boom). Hydraulically extendable outriggers. Right outrigger rotates hydraulically upwards. 3.00 m - 4,580 kg. 4.00 m - 3,440 kg. 5.00 m - 2,750 kg. 6.00 m - 2,270 kg. 7.00 m - 1,930 kg. 8.00 m - 1,670 kg. 9.00 m - 1,430 kg. Maximum reach 9.50 m. Bakker grapple: 120 cm. HTS / NCH container system. Iijdpfxox Rpl Rs Apcog 25,000 kg. 550 cm. Hydraulic bumper. Ringfeder coupling 50 mm. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Front axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Brakes: Disc brakes; Suspension: Air suspension Rear axle: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 90%; Tire tread depth left outer: 90%; Tire tread depth right inner: 90%; Tire tread depth right outer: 90%; Brakes: Drum brakes; Suspension: Hydraulic suspension Front axle 2: Tire size: 315/80R22.5; Dual tires; Steered; Tire tread depth left inner: 90%; Tire tread depth left outer: 90%; Tire tread depth right inner: 90%; Tire tread depth right outer: 90%; Brakes: Drum brakes; Suspension: Hydraulic suspension Weights Unladen weight: 16,675 kg Payload: 15,325 kg GVW: 32,000 kg Functional Crane: Palfinger Financial Information Price: Upon request Identification Model number: CF 410 / 6x4/6x6 / PALFINGER Z-K = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: excellent (used), mileage: 209,020 km, power: 390 kW (530.25 HP), first registration: 11/2020, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,460 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional options and equipment = - Aluminum fuel tank - Brake booster - High beam headlights - Speed limiter - Refrigerator - Air suspension - Particulate filter - Rearview camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system - Towing jaw = Further information = Technical specifications Number of cylinders: 6 Engine displacement: 12,809 cc Axle configuration Brakes: Disc brakes Iodpsyiun Tefx Apceig Front axle 1: Tyre size: 385/65/22.5; Max. axle load: 8,000 kg; Steered; Suspension: Leaf spring Front axle 2: Tyre size: 385/65/22.5; Max. axle load: 8,000 kg; Steered; Suspension: Leaf spring Rear axle 1: Tyre size: 315/80/22.5; Twin tyres; Differential lock; Max. axle load: 11,500 kg; Suspension: Air suspension Rear axle 2: Tyre size: 385/65/22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Suspension: Air suspension Weights Unladen weight: 16,545 kg Payload: 15,455 kg Gross vehicle weight (GVW): 32,000 kg Functional Lifting capacity: 5,330 kg Lifting height: 1,460 cm Crane: HMF 2820, year of manufacture: 2020, mounted behind the cab Condition Technical condition: Very good Optical condition: Very good MERCEDES-BENZ AROCS 3253 L ENA 8X2/4 HMF2820 CRANE WITH TF.324 CABLE SYSTEM EURO 6 530 HP DRIVELINE ENA 8X2/4, 4TH AXLE LIFTED/STEERED TECHNICAL PERMISSIBLE GROSS VEHICLE WEIGHT (GVW) 35,000 KG WHEELBASE 530 CM DAY CAB WITH AIR CONDITIONING 27MC, REFRIGERATOR BOX REARVIEW CAMERA AUTOMATIC TRANSMISSION TRAILER COUPLING FOG LIGHTS HMF2820 K5 POWER-OPERATED CRANE MAX. LIFTING HEIGHT 14.6 M MAX. LIFTING CAPACITY AT 4.6 M: 5,330 KG MAX. LIFTING CAPACITY AT 14.7 M: 1,410 KG 5-6 FUNCTION HMF TF.324 CABLE SYSTEM LOADING LENGTH: 600 CM, WIDTH: 246 CM 2 X SIDE BOARDS WITH HYDRAULIC CONTROL

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Includes hand-held remote control. Faceplate diameter: 1000 mm. Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Isdpfxozyx Nbe Apcjig Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Includes complete documentation, plans, operating instructions, and EC declaration of conformity. New price: approx. €75,000.

Condition: good (used), Year of construction: 2013, 1 used robotic welding system Manufacturer: Yaskawa/Motoman Year of manufacture: 2013 With 2 robots (load capacity: 1 x 165 kg, 1 x 50 kg) Each with 1 x WIG AC and DC welding system from EWM, 1 x spot welding tongs from Dalex, and 2 swiveling fixture systems Year of manufacture: 2013 Suitable for welding housings made of steel, stainless steel or aluminum Technical specifications Robotic welding system – Specifications / Equipment Robotic welding system Dimensions W x D x H: 16,000 x 6,000 x 2,500 mm - Control system S7 for fixture Double welding cell with 2 maintenance doors and 2 loading stations - Opaque enclosure Robots / Positioners 2 Motoman 6-axis welding robots 1 x 50 kg version 1 x 165 kg version - Extended design 2 x bases 1 x control unit with operator panel DX - Master - Slave 1 x floor-mounted chassis with 2 parking stations 2 stations - rotary tables with integrated pneumatics for "clamp on" function Centrally programmable in sync via 1 robot control unit Media feedthrough for compressed air and electrical signals in the positioner Design and manufacture of a base frame for part support Welding and clamping table S 4 3,000 x 1,500 mm with tool set 2 Digital I/O card for welding equipment EWM WIG welding system Tetrix 422 DC - RC Article no.: 520000050019 For automated and robotic applications Inverter DC welding unit Standard interfaces for automation (Start/Stop, pilot voltage, current flow), optional interfaces TETRIX RINTX11, industrial bus interface TETRIX BUSINTX11, documentation interface PCINT X10 (+ software Q-DOC 9000), and monitoring and documentation system WELDQAS Controllable parameters with interfaces: 256 jobs (welding tasks) with 16 programs each in program mode, as well as wire speed, correction of arc length and arc dynamics via pilot voltages, etc. Connection options: Remote control, optional interfaces for automation, documentation and PC connection Output 5 - 420 amps 420 amps 60% duty cycle - 40 °C 360 amps 100% duty cycle - 40 °C Power supply 400 volts (-25% / +20%) Dimensions 654 x 576 x 374 mm Additional cost for AC/DC version – 1 unit EWM WIG cold wire feeder Tetrix Drive ROB Article no.: 520000040018 Quantity: 2 units Lightweight, compact wire feeder for mounting on a robot or fixture Iedpfxez Aac Ue Apcjig 4-roller drive Connection for water cooling Control with digital incremental encoder Push-pull capable Separate button for wire retraction, gas test and wire threading Parameter setting and storage centrally via welding system control unit Wire speed 0.1 to 5 m/min Wire feed steps 0.01 m/min Weight 6.5 kg Dimensions 345 x 230 x 250 mm Left-opening design ABITIG WH torch system Alternating neck technology Push-pull drive for precise wire feed Water-cooled Output 400 amps Torch holder and changing station with pneumatic locking Design and manufacture of a part support for aluminum rear panel Resistance welding equipment / other components Resistance welding equipment for robot, consisting of - Medium frequency inverter power source - Transformer with 250 kVA rated power - X-welding tongs High-performance water chiller Design and engineering Documentation such as machine design and parts lists in a simple form in German CE declaration Welding fume extraction system with piping

Condition: excellent (used), mileage: 422,117 km, power: 315 kW (428.28 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 470 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 8,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking air conditioner, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - Speed limiter - Air horn - Parabolic suspension - Particulate filter - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication Iiedpowhprrjfx Apcsg - Towing jaw = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,677 cc Axle Configuration Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Weights Unladen weight: 14,110 kg Payload: 29,890 kg Gross vehicle weight: 44,000 kg Functionality Body brand: VDL S-30-6600 Condition Technical condition: Very good Visual condition: Very good Identification License plate: 61-BKH-9 MERCEDES-BENZ AROCS 8X4 VDL S-30-6600 HOOKLIFT TIPPER EURO 6 430 HP 8X4 DRIVE WHEELBASE 485 CM FULL LEAF SUSPENSION DIFF LOCK AUTOMATIC WITH ENGINE BRAKE TRAILER COUPLING VDL S-30-6600 HOOKLIFT TIPPER HYDRAULIC CONTAINER LOCKING TOOLBOX FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR FORKLIFTS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU ГОВОРИМО УКРАЇНСЬКОЮ

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. Iiedpfxjv Hbdrs Apcog • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 200 kW (271.92 HP), load capacity: 1,300 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. Iodpfx Apjyy Rk Hecoig • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 135 kW (183.55 HP), load capacity: 800 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. Iisdpfx Apsyy Rktscjg MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 300 kW (407.89 HP), load capacity: 2,000 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. Iiodpfx Apeyy Rk Tocsg • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 80 kW (108.77 HP), load capacity: 400 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. Iodpfeyy Ricox Apcjig PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery