Used Bottom Flattener for sale (2,965)

Condition: used, functionality: fully functional, mileage: 270,677 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Rodpfxezwfths Ahgocf Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 7 mm Front right - 7 mm Rear left inner - 7 mm Rear left outer - 7 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: excellent (used), Year of construction: 1999, Jung C-740-C year of construction: 1999 control: siemens magnet: 700 x 400 mm max. grinding range: 880 x 460 x 550 mm ( x,z,y) magnet variable attraction force variable speed: 1500-3500 rpm max. load on the table: 800 kg top clamp bottom clamp 2x remote control Rcsdpfx Aou I Rtijhgjf balancer various grinding stones documentation machine is under power for inspection

Condition: used, functionality: fully functional, mileage: 290,944 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Redezwdatopfx Ahgjcf Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 5 mm Rear left outer - 6 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: refurbished (used), functionality: fully functional, grinding wheel diameter: 150 mm, year of last overhaul: 2026, disc diameter: 150 mm, grinding spindle motor power: 2,200 W, compressed air connection: 5 bar, The machine has been completely disassembled, all wear parts have been replaced, and it has been repainted – it is in like-new condition. Sale includes a functional guarantee. Key features: - For resharpening and re-toothings of HSS segment, CV, and solid carbide saws using the CBN deep grinding process Tooth form A, Aw, B, Bw, and C according to DIN1840 - Grinding of Vario teeth (option) - Grinding of special teeth (option) - Grinding of carbide teeth (option) - Grinding of segment teeth (option) - Freely adjustable (programmable) tooth geometry - Grinding of repair segments for segment saws - Chamfering on alternating top/bottom or on one side - Rake and clearance angles can be continuously adjusted - Improved machine guard for easy opening/closing Key advantages: - Short grinding times with high surface quality due to stable machine design with adapted clamping flanges for the saw blades and high drive power. - Consistent, repeatable quality thanks to CNC control - Powerful grinding wheel drive - Fully digital servo drives (2 CNC axes) Technical data: Rcedpfspgkgqsx Ahgjf - Saw blade diameter 20-550 mm - Maximum saw blade thickness 6 mm - Number of teeth 20-999 - Working speed 3-75 teeth/minute - Cooling approx. 5 bar at 40 l/min - Grinding wheel drive 2.2 kW - Dimensions L x W x H approx. 1750 x 1200 x 1800 mm - Net/gross weight approx. 800/980 kg - Paint color: Dove blue Accessories: - Software for grinding curve teeth, bevel teeth, circular grinding (Software extensions such as special teeth, Vario teeth, carbide teeth, available on request) - Saw blade arbors, diameter 400, 300, 215, 180, 140 mm (other sizes available on request) - Conversion to English language (keyboard input) possible - Reducing rings, diameter 16x22, 27, 32, 40, 50 mm (other sizes available on request) - Multiple grinding wheels, new and used, included - Basic arbor for saw blade arbors - Mechanical clamping nut - Cooling system incl. high-pressure pump, mist extraction, and magnetic separator, designed for cooling with emulsion. - Automatic central lubrication with lubrication pressure monitoring (linear guides + ball screw drive) - Operating manual incl. circuit diagrams - Operating voltage 400 V A trade-in of your existing used ECE 45 is possible. Spare parts that may be required later can be supplied by us.

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 8 Positioning of Units by NC: yes Rsdszmmt Ispfx Ahgjcf Lateral horizontal groups: yes

Condition: excellent (used), Year of construction: 2010, We sell 156 used stackable-nestable bread crate, make BROBAN KRAT with metal 7 rollies in very good condition. This type of crate, a stackable-nestable bread crate, make BROBAN KRAT, with a capacity of 47 liters and dimensions of 700 x 496 x H 190 mm, offers versatility and convenience for the bakery industry. This crate is designed to meet the needs of both transporting and displaying various types of bread. With its galvanized stacking handle and stacking lugs, the crate is ideal for multi-level stacking, allowing for space-saving and efficient use of storage space. Whether it's organizing stock in the bakery or transporting bread to different locations, this functionality provesto be highly beneficial. The perforated bottom and side walls not only provide strength and durability to the crate but also ensure proper air circulation. This promotes the freshness of the bread by guaranteeing optimal ventilation during both transport and storage. This crate is a versatile solution suitable for all types of bread, from baguettes to artisan loaves. Thanks to its features, it is ideal for bakeries that value both efficiency and maintaining the quality of their products during transport and presentation. Rcedpevuclgofx Ahgof Price 2,000 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2002, Max. bending length 3000 mm Max. prebending 65 mm Max. rolling capacity 77 mm Top & bottom rolls dia. 700 mm Rsdpfx Ahszxc Dyegscf Side rolls dia. 570 mm 4-roll Fully hydraulic machine Hydraulic drop end Motor power 163 Kw CNC-control (upgraded in 2121) Equipped with: 1 hydr. top support (9000 mm diameter) installed in 2014 NOTE !!! The hydraulic side table shown on photos - is NOT included !!!

Condition: excellent (used), Double-Jacketed Mixing Vessel / Pot – 650 L – Stainless Steel Industrial mixing vessel / pot with a capacity of 650 liters, made of stainless steel, equipped with a double jacket for heat treatment and a mixing system, designed for the preparation, mixing, heating, and homogenization of food products in industrial batch processes. The equipment combines a 650-liter vertical vessel with a motorized agitator and a double jacket, allowing mixing and heat treatment operations to be carried out in a single container. Its design is particularly suitable for products that need to be kept in motion during heating to achieve a uniform distribution of ingredients and temperature. MAIN FEATURES -Type: Industrial mixing vessel / pot with agitator -Capacity: 650 liters -Vertical configuration -Double jacket for heat treatment Rjdpfozxcd Hox Ahgecf -Integrated mixing system -Agitator with motorized drive -Mixing and homogenization of the product -Stainless steel construction -Large-capacity process vessel -Curved bottom -Sanitary product connections -Bottom discharge -Robust structure on legs -Designed for batch processing -Hygienic construction for the food industry -Integrable into existing production lines PROCESS The vessel is designed to receive the ingredients and continuously mix them using the internal agitator. The double jacket allows for heat treatment of the product, which can be used for heating, temperature maintenance, or cooking operations, depending on the product and the available thermal services. Agitation during the process promotes homogenization of the ingredients and a more uniform distribution of the temperature, making it particularly useful for liquid, semi-liquid, and viscous products. It can be used for: Mixing and homogenization Heating Cooking Temperature maintenance Dissolving ingredients Preparation of formulations Production of sauces, creams, and purees Preparation of fillings and formulated products APPLICATIONS Especially suitable for canning industries, sauce manufacturers, ready-meal producers, vegetable product manufacturers, cream and puree manufacturers, filling manufacturers, and other food industries that require a versatile mixing and heat treatment equipment. The combination of a 650-liter capacity, double jacket, motorized agitator, and stainless steel construction provides a robust solution for industrial processes involving preparation, cooking, and mixing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), CTS 2,500 L Vertical Vat / Mixer with Double Jacket and Agitator – Stainless Steel Industrial vat / vertical mixer CTS with a capacity of 2,500 liters, equipped with a double jacket for thermal treatment and an agitation system, designed for the preparation, mixing, heating, and homogenization of food products in industrial batch processes. The equipment combines a large-capacity vertical vessel with a motorized agitator and a double jacket, allowing mixing and thermal treatment operations to be performed on the product in a single unit. Its 2,500-liter capacity, stainless steel construction, and bottom discharge make it a particularly interesting solution for plants that process large volumes of product. MAIN FEATURES -Manufacturer: CTS -Capacity: 2,500 liters -Type: Industrial vertical vat / pot / mixer -Vertical configuration -Double jacket for thermal treatment -Integrated agitation system -Agitator with motorized drive -Mixing and homogenization of product -Stainless steel construction -Large-capacity vessel -Curved bottom -Bottom product discharge -Discharge valve -Robust support structure -Integrated control panel -Designed for industrial batch processing -Integrable into food production lines PROCESS The 2,500 L CTS is designed to receive the ingredients and mix them using the internal agitation system. The double jacket allows for the thermal exchange necessary to heat or maintain the product temperature, depending on the conditions and services available in the installation. The agitator keeps the product moving during the process, promoting uniform distribution of the ingredients and temperature. Once the cycle is complete, the product can be discharged through the outlet located at the bottom. It can be used for the following operations: Mixing and homogenization Heating Cooking, depending on the process Temperature maintenance Formulation preparation Dissolution and incorporation of ingredients Preparation of sauces, creams, and purees Rcedpfxjzbi Rme Ahgef APPLICATIONS Particularly suitable for canning industries, sauce manufacturers, prepared meal producers, vegetable product manufacturers, puree, cream, and filling manufacturers, and other food industries that require a large-capacity processing vessel with agitation and thermal treatment. The combination of 2,500 liters, double jacket, agitator, and stainless steel construction provides a versatile solution for industrial preparation and mixing processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2009, Storage number: 100102162 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Undercarriage with 6m gauge, including central ballast Tower for 30m hook height Outreach 65m, including counterweight Tower system 256HC Cab Radio Rjdozxb Nnspfx Ahgocf ABB Central lubrication system 45 kW hoisting gear Price ex works Nuremberg

Condition: new, Year of construction: 1992, Storage location number: 100581742 Rjdpfx Ahjzxb Nuegscf Transport dimensions (L x W x H): 0 x 0 x 0 ---- Peiner tower crane SMK201, jib length 22m, hook height 17m, max. load 2000kg, radio remote control, ready for operation.

Condition: new, Year of construction: 2006, Storage location: 100545026 Transport dimensions (L x W x H): 0 x 0 x 0 Rcodezxb Nhepfx Ahgef ---- Lifting mechanism 65kW 1 x Undercarriage 6.0m track width and required central ballast Tower sections for 30m hook height Slew radius 50m including counterweight Color: Yellow Includes HBC radio control system Location: Regensburg

Condition: as good as new (ex-display), Year of construction: 2026, The outstanding advantages: Space-saving, compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air deflectors – also suitable for larger workpieces. Separation rate of paint mist up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in a long filter life! Easy and quick filter change on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray wall made of galvanized steel sheet with welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan incl. throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in consumption. The IPE dual filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² filter area) than conventional filter mats, thanks to its folded filter pockets. The subsequent fiberglass secondary filter only absorbs the finest residual particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors at the floor level or from floor pits. Thanks to this additional intake opening at the bottom, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also makes filter changes easier. Standard extraction capacity Easy Paint 3500 Item No. 600025 Airflow rate with standard delivery * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW ex Connection fitting for extraction hose D = 300 mm Width in mm 2750 Total height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine at a special price. Rcedpfx Aecnz Iqshgsf

Condition: used, mileage: 250,700 km, power: 235 kW (319.51 HP), first registration: 05/2014, fuel type: diesel, empty load weight: 8,588 kg, maximum load weight: 9,412 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Mercedes-Benz Actros/Antos 1832 Tanker Truck First registration: 4/2014 Only 250,700 km, with documentation!!! Rcsdpjzhmc Sefx Ahgjf Euro 6 emission standard Short cab Automatic transmission Air conditioning Air suspension front and rear Trailer coupling Wheelbase 4000mm Tires 315/80 R22.5, approximately 80% tread remaining, all on aluminum rims Unladen weight 8,588 kg Tank body by Lindner & Fischer for diesel/heating oil/gasoline Year of construction 2014 2 compartments Volume 14,000 liters Top and bottom filling Complete equipment included The vehicle is from a single owner and is in good condition. Valid TÜV (technical inspection) until March 2027. Export/net price: 45,900 Euros All information without guarantee, errors and omissions excepted.

Condition: used, functionality: fully functional, mileage: 381,026 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Rcodpezv N H Nsfx Ahgjf Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 9 mm Rear left outer - 9 mm Rear right inner - 9 mm Rear right outer - 9 mm

Condition: used, Unloading at the bottom 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm suitable for steam injection (double-walled) Rodpfozv Rn Usx Ahgocf

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders Redpfx Aoy N Dwrohgecf + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Rcodpezn N Ikofx Ahgsf

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-sided planer with additional horizontal work spindle unit and outfeed unit 4-sided universal planer KUPFERMÜHLE Electrical system 400 Volt / 50 Hz ...../58.5 kW Paint finish still original Reseda green RAL 6011 Motor power + arrangement kW bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle bottom 11.0 / feed 7.5 / power 3.0 Feed speed min/max. 5 – 30 m/min Working spindles 5 pieces Dust extraction / suction nozzles bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min / max 30 mm / 310 mm Working height min / max 2-sided 15 mm / 300 mm Working height min / max 4-sided 15 mm / 180 mm (OPTION 250 or 300 mm) Key features Constant table height Guide rail RIGHT Planer heads for changing Jointing device at the bottom and top Rcedpsx Ehfcsfx Ahgsf Table tops with slits for sound insulation and are interchangeable Outfeed unit with 2 driven rollers at the top and double-sided guided upper part Height adjustment synchronized with the base machine Machine in repaired and inspected condition with functional guarantee Further options New paint finish Repainting Complete overhaul etc. etc.

Condition: used, functionality: unexamined, Planer machine, planing shaft at the top and bottom Sliding table planer machine, double-sided Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Planing height max. 310 mm Rsdsy Ryx Uepfx Ahgscf Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Jointing unit at the bottom and top Year 1990

Condition: used, Planing machine with planing shaft at the bottom and top Double-sided planing machine Feed rate continuously adjustable up to 110 m/min Planing width max. 310 mm Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Rcodpfey Ry Ddjx Ahgof Feed: 13 kW Jointing device at the bottom and top

Condition: like new (used), functionality: fully functional, Knife shaft Z4, in like-new condition. Planer shaft Z4. 1 unit for the bottom. Rcodpfxsyur N Eo Ahgef 1 unit for the top. Originated from K133, and we can also shorten it by 300 mm for K103. 40% cheaper than a new one from the manufacturer.

Condition: good (used), Approx. 4–500 units, Isoco, Euro container / small load carrier RL-KLT 6147 – used: Price per unit, ex works: €3.50 (net)! Manufacturer: Isoco Type: RL-KLT 6147 Year of manufacture: unknown Dimensions (L x W x H): 600 x 400 x 147 mm Weight: approx. 1.82 kg Smooth bottom With drain holes Blue Rcedpfszv Ip Ajx Ahgjf Manufactured according to VDA standard 4500 Smooth container bottom with water drain holes Ideal for automated logistics processes Lid slots for matching top lids Integrated label areas for barcode labeling Temperature resistant from -20 °C to +100 °C New price: approx. €8.39 Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, functionality: fully functional, mileage: 377,588 km, power: 331 kW (450.03 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Rcjdpfx Ahezv Iipsgof Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 10 mm

Condition: used, functionality: fully functional, mileage: 464,854 km, power: 346 kW (470.43 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Redpfjzv Iicex Ahgjcf Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 13 mm Front right - 14 mm Rear left inner - 9 mm Rear left outer - 9 mm Rear right inner - 8 mm Rear right outer - 8 mm