Used Bear Spr500 for sale (3,062)

Condition: excellent (used), Year of construction: 2017, cutting diameter 350 mm saw band length 4780 x 34 x 1.1 mm capacity 90 degrees: flat 500 x 340 mm capacity 45 degrees: round + 350 mm capacity 45 degrees: flat + 380 x 340 mm capacity 60 degrees: round 230 mm capacity 60 degrees: flat 220 x 340 mm capacity 45 degrees: round - 350 mm capacity 45 degrees: flat - 220 x 340 mm coolant capacity ca. 100 l band speed 20 - 100 m/min Control SIEMENS voltage 3x 400 V total power requirement 3.0 kW AC weight 2150 kg range L-W-H 3030 x 3150 x 2000 mm In very good condition Demo machine from the manufacturer PEGAS With a wide range of special features Original price about 60.000 euros Special price upon request - in checked conditions - machinevideo - ?v=dv_wXIT9BaQ Features: - Robust, highly efficient electro-hydraulic miter band saw * Fully automatic (INDUSTRIAL) = with automatic material feed * Model: Two-column band saw * Maximum stability and vibration damping during cutting * Powerful saw band drive with a 3.0 kW motor - Material feed unit with ball screws * "Longstep feed gripper" for a maximum feed length of 1.000 mm - Includes SIEMENS PLC control unit * Selectable semi-automatic or fully automatic cycle * 200 programs, each with 99 programmable cut lengths and quantities * When the remaining length is 500 mm, the machine interrupts the sawing cycle * Protection against damage or jamming of the material - For angles from 0° to 60°, with a ball-bearing rotary table * Programmable CNC adjustment of the miter angle * Right (0° to 60°) and left (0° to 45°) * Stepless adjustment of the miter angle * Adjustment via a robust gear train - Saw blade guides made of carbide plates Fgedjzqgf Sopfx Albeg - Saw feed infinitely adjustable via a fine-adjustment knob - Sturdy machine bed and torsion-resistant saw frame - Infinitely variable speed adjustment of the saw blade - Coolant system - Operating instructions for the machine and control system

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & Travel Ranges C-axis: 360° (Indexing / Positioning in 0.001° increments) Fgodjzu I U Aopfx Albjg Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WRE-200920166278FL, CNC Milling Plotter CNC-1325 5.5 kW Working area: 1300x2500, Z-300 mm - DSP NK 105G2 controller with proprietary processor, allowing parameter changes during machine operation - Modern software for easy creation of 2D, 2.5D, and 3D files from images - Brushless spindle, industrial-grade bearings, water-cooled, 5.5 kW (24,000 rpm) - Digital drives with rack and pinion transmission (X, Y axes) - Helical rack gears - Z axis driven by TBI 25mm ball screw Fgjdsy Au Eajpfx Albog - Chip extraction brush - Welded steel frame - Automatic tool length calibration sensor - WIWIN-25mm linear rail guides - Vacuum table with 4 suction zones - BUSCH-250 vacuum pump - Oil mist tool cooling system - Automatic tool changer, 5.5 kW ATC spindle - Chiller unit for ATC spindle cooling The machine is in excellent condition, used only occasionally. Sold complete with vacuum pump. For further information please call: Piotr Żołnierczyk, tel. 606 666 023.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h Fgsdpfszzw Niex Albsg A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us. Fjdpfx Alezyc Rijbegg

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical specifications of the DOOSAN LYNX 220A metal lathe swing over bed: 510 mm maximum turning diameter: 320 mm recommended turning diameter: 170 mm maximum turning length: 322 mm bar diameter: 45 mm X-axis travel: 175 (160+15) mm Z-axis travel: 160 mm rapid traverse rate in X/Z axis: 30/36 m/min spindle speed: 6000 rpm spindle bore diameter: 53 mm spindle bearing diameter: 90 mm spindle nose: A2-5 spindle drive power (30 min/continuous power): 15/11 kW chuck diameter: 6″ tool diameter: 25×25 mm boring bar diameter: 40 mm tailstock quill diameter: 65 mm tailstock quill stroke: 80 mm tailstock quill taper: MT4 X,Z axis drive power: 1.8 kW coolant pump motor power: 0.18 kW rated power: 23.68 kVA power interruption resistance: 17 kA full load current: 62.15 A short-circuit resistance: 65 kA power supply: 3x 200/220 VAC; 50/60 Hz dimensions (L x W x H): 2325 x 1600 x 1600 mm weight of DOOSAN LYNX 220 A machine: 2900 kg Equipment of the DOOSAN CNC lathe CNC control unit: DOOSAN FANUC i Series 12-position turret tailstock lubrication system cooling system foot switch control hydraulic unit Fjdpjzx S A Esfx Albsgg tightly sealed work area enclosure with a lock for the front door work area lighting

Condition: used, Colchester Magnum 1250 Gap Bed Centre Lathe. Distance Between Centres 4000mm (157"). Swing Over Bed 635mm (25"). Swing In Gap 900mm (36"). Spindle Bore 118mm. Spindle Speeds 6.3 - 1250rpm. Leadscrew 2 TPI. Rapid Power to Saddle & Cross Slide. Quick Change Tool Post & Holders. 3 & 4 Jaw Chucks. Fgjdozy Im Nspfx Albeg 3 Point Roller Bearing Steady. Newall DP 700 Digital Readout & Tooling. Weight Approx: 6000KG

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a high-quality CNC carousel turning, boring, and milling center from the German manufacturer Konrad Seidler from Neuss – Holzheim, model: MINIMAX 1800, built in 2013. The machine comes from a single owner and was used in a single-shift operation in our own production facility. After the commissioning of a new manufacturing solution, the machine was decommissioned, the spindle was renewed/overhauled, and the machine underwent a comprehensive service. Since then, it has been in operational condition but is no longer used in production. The machine is in fully functional and ready-to-use condition. An inspection and a test run under power can be arranged at any time. Of particular note is the extensive overhaul of the boring/milling spindle in 2025, which brought a significant wear component of the machine back to like-new condition technically. Investment costs: 36.5 TEUR. Documents available. Highlights: • Turning, boring, and milling center in one machine • Year of manufacture: 2013 • Siemens 840D SL CNC control system • SINAMICS 120 drive technology • Tool changer with 16 stations • HSK100 tool holder • Rotary table load: 6,000 kg • Rotary table speed: 5–500 rpm • Milling spindle up to 6,000 rpm • High-pressure coolant system: 30 bar • Chip conveyor • Walk-in work area • Single owner • Extensive documentation available • Available for short-term delivery In 2025, the installed Capellini high-performance spindle (HSK100, 6,000 rpm) was completely overhauled by a specialized company (Deuschle). Excerpt of work performed: • Measurement of all components on a measuring machine • Replacement of precision bearings (FAG / SKF / GMN / NSK) • Replacement of the HSK100 clamping system • Replacement of Balluff sensors • Refurbishment of the spindle shaft using laser welding and grinding • Replacement of all wear parts • Fine balancing according to ISO 1940 • System balancing of the complete spindle assembly • Adjustment of bearing spacers • Final inspection including test report Technical data: Control system: Siemens 840D SL Drives: SINAMICS 120 Turning diameter: 500–1,270 mm Rotary table load: 6,000 kg Rotary table speed: 5–500 rpm Boring/milling spindle: 30 kW Torque: 190 Nm Boring/milling spindle speed: 2–2,500 rpm (max. 6,000 rpm) Tool holder: HSK100 Tool changer: 16 tools Coolant system: 6 bar / 30 bar high pressure Chip conveyor: Cross conveyor, discharging to the left Discharge height: 1,200 mm Machine weight: approx. 22,000 kg Enclosure: Double sliding door, walk-in work area Documentation available: Fsdpfx Alezhlbmebogg • Operating manuals • Installation manuals • Electrical diagrams (partly) • Documentation of machine components • Documents for the control system • Documents for the chip conveyor • Other original documents from the commissioning Sale ex works, excluding loading. The buyer organizes the crane and transport. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system Fgsdpfxezhudqj Albog • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: used, Year of construction: 2024, functionality: fully functional, Year of manufacture: 2024 Cutting ranges: Cutting range 90° round 360 mm Cutting range 90° flat (W x H) 360 x 360 mm Clamping range 0 - 360 mm Smallest section length 10 mm Smallest dimension to be cut 10 x 10 mm Shortest remaining piece length in automatic operation (only possible with geometrically flawless surfaces) 35 mm Shortest remaining piece length in single cut 10 mm Dimensions and weights: Overall dimensions (L x W) 1,650 x 2,900 mm Height 2,030 mm Material support height 700 mm Weight 3,450 kg Performance characteristics: Saw motor, frequency-controlled 4 kW Total connected load 6 kW Single material feed length 500 mm Multiple feed length 9,999 mm Machine roller track, length 1,100 mm Ball-bearing mounted, robust transport rollers 8 pieces Roller diameter 60 mm Roller axle spacing 135 mm Cutting speed, continuously variable 12 - 150 m/min Saw blade dimensions 6,096 x 34 x 1.1 mm Alternatively 6,096 x 41 x 1.3 mm Cutting feed: electrically adjustable via ball screw Material feed: ball screw Material clamping: hydraulic Saw blade cleaning: self-adjusting chip removal brush, electrically driven Coolant: Pump capacity 75 l/min at 2 m head, Coolant tank volume approx. 100 l Paint finish: Light grey RAL 7035, anthracite grey RAL 7016 textured paint Compressed air connection: approx. 6 bar required (customer-side) KASTO sawing machine control ProControl 9" Hardware  Industrial PC, fanless, no moving parts  Robust metal housing, aluminum front panel  Resistive touchscreen  Color TFT display 9"  Ambient temperature 0 - 50 °C  Protection class, front: IP65 Software Fgodszv Th Djpfx Albog  Operating system Windows 10 Enterprise LTSC 2019  SIMATIC S7 - 1500 Failsafe Software Controller CPU

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 Fsdpfx Aljg Sxyvsbogg -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring Fodpozuw H Iofx Albegg - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Fedpfx Ajzt Ai Eolbjgg Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Fjdswqb Scepfx Albjgg Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,572 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,310 mm, total width: 2,504 mm, table width: 528 mm, table length: 900 mm, table load: 400 kg, overall weight: 4,800 kg, spindle speed (max.): 7,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 40, product length (max.): 2,310 mm, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details. • Working hours (from display): • Control on: 68,311 h • Machine on: 65,234 h • Program run: 13,572 h • Spindle Speed Range: 20 - 7000 rpm (stepless) • Taper / Tool Holder: SK 40 (similar to DIN 2079 / DIN 69871 / DIN 69872-19) • Tool Clamping: Hydromechanical (Clamping Force: 10 kN) • Spindle Diameter Front Bearing: 55 mm (Horizontal/Vertical 80/55 mm) • Feed Rate (X, Y, Z): 1 - 2000 / 15000 mm/min • Feed Force (80% Duty Cycle): 8000 N Fedpfx Asy H Irbslbsgg • Rapid Traverse (X, Y, Z): 15 m/min • Table dimensions: 900 x 528 mm • Swivel Range Spindle Head: 0 - 90° • Quill Stroke (Manual): 75 mm (Quill Diameter: 100 mm) • T-Slots: 7 slots, Width 14 H7 mm, Pitch 63 mm • Tool Changer: Vertical Tool Changer HTC 16 (16 pockets) • Noise Level: 75 dB (A) • Total Floor Space Requirement: 5.00 m² • Floor Load: ca. 964 kg/m² Technical Specification Taper Size SK 40

Condition: used, Broadbent - Schofield Gap Bed Centre Lathe. Distance Between Centres Approx 5M (16ft). Swing Over Bed 35". Swing in Gap 55". Spindle Bore 4 1/2". Spindle Speeds 7 - 500rpm. Leadscrew 2 TPI. Taper Turning Attachment. Bison 800mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Fsdpfx Aszy Ipqjlbjgg Digital Readout & Tooling & 2 Rear Splash Guards.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Fedpfxjzv S Ate Albjgg Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Fgedpfxjzimqrs Albjg Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Fodsy Sub Hopfx Albsgg Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 420 x 120 mm Fgodpfxezbrkco Albog -Weight: 34.7 kg/pc.

Condition: excellent (used), functionality: fully functional, repeat accuracy: 0.001 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 800 mm, Equipment: documentation/manual, Measurement sensor: TP200 Fgedpfozwvlzjx Albsg Software: Camio Volumetric accuracy: 2.5+L/225 µm The LK Metrology G90C is a high-precision coordinate measuring machine (CMM) ideal for industries requiring exceptional accuracy. It features a ceramic structure, air bearings, and an advanced drive system, ensuring stability and speed. The device has been thoroughly tested and inspected by our technicians and is currently available in our showroom. For more information: nenad.mitrakovic(at)teximp.com

Condition: used, Year of construction: 2011, functionality: fully functional, Werth Metrology: Scope - Check 650 MB Z 3D CNC 650x750x500 Standard accuracy Measuring range: X = 650 mm Y = 750 mm Z = up to 500 mm The measuring range available for measuring workpieces is determined by the sensor and accessory configuration. Machine dimensions: W = 1230 mm D = 1560 mm H = 2550 mm Max. permissible workpiece weight: 500 kg Machine weight: approx. 1410 kg Coordinate measuring machine in bridge construction for 3D CNC operation with standard accuracy. The multi-sensor concept supports combined measurement with multiple sensors. Technical features: - Base unit on a solid base in a "moving bridge" design - Air-bearing bridge in the Y-axis with integrated air-bearing carriage in the X-axis and air-bearing Z-axis on a solid base - Maximum permissible length measurement deviation MPE in accordance with ISO 10360 or VEDI VDE 2617 (with motorized zoom optics, maximum magnification, or sensor with the same or better probing deviation) The device functions perfectly. The measuring machine can be tested on-site if desired. Important information: A computer with the operating system Windows XP is also included – it runs smoothly. Fgedoy Uly Sspfx Albjg Software version of Werth measuring software: - see photo. If someone wants to have a current operating system, the update must be performed independently.

Condition: used, Year of construction: 1999, Second-hand fan Centrifugal fan with V-belt drive Suitable for use in both raw air and clean air applications Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Discharge direction GL 360/5 Connection: 300 mm Motor power 11 kW Air flow rate 7,000 m³/h Availability: at short notice Storage location: Röllbach Fgjdpfx Aljzk Niyjbeg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Fjdpfozv U Ifsx Albjgg Drive: electro-hydraulic, electric motor 200 kW, Hydraulic unit with control cabinet and operator panel, 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Discharge conveyor belt recently replaced.

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Fgodpfxeya Da He Albog Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Nominal Load Limit at Load Center: 1.8 t Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! Shipping costs abroad on request!