Used Arburg Injection Moulding Machine Arburg Parting Line for sale (75,337)

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Bwedow U Taxepfx Albot Increased specific injection pressure: 2,180 bar. Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.

Condition: used, Year of construction: 2016, Manufacturer: KRAUSS MAFFEI, Type: KM 850-6100/1400 MXZ Blue Power, Year of manufacture: 2016, Serial number: 61024868, Control system: Krauss Maffei MC5, Clamping force: 850 t, 2 injection units, Rotary table, Installation height min./max. 500/960 mm, Daylight opening 1,120 mm, 48 hot runner nozzles, hydraulic core pull systems 2 (DS) 3 (AS), Screw diameter 95/60 mm, Shot weight 3,200/500 g, Parts removal robot, Manufacturer: Krauss Maffei, Type LRX350, Year of manufacture: 2016, Serial number: 2114889, Conveyor belt, 3,000 x 800 mm 37,544 hours (25,846 net production hours) Note: Machine is part of an online auction! Bodpfszn Ap Iex Albewt

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Bwjdpfjzkfh Sjx Albjt Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot The machine is in very good condition and is operational.

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Bwodjwlkb Nepfx Albjt Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Bsdpfsymqz Rjx Albjwt delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2006, ENGEL DUO 7050/1100 Advanced Injection Moulding Machine Year of manufacture: 2006 Control system: ENGEL EC100 / CC100 (microprocessor-based) Key Technical Specifications Clamping force: 11,000 kN Platen dimensions: 1,850 × 1,810 mm (width × height) Tie bar spacing: 1,400 × 1,150 mm (horizontal × vertical) Mould height: 400 – 1,200 mm Variant A: Reduced minimum mould height to 400 mm (–200 mm) Maximum opening stroke: 1,800 mm Screw diameter: Ø105 mm L/D ratio: 22 (M3 barrel), optionally L/D = 24 (extended M3 barrel) Injection volume (max): 4,160 cm³ Injection weight (PS, max): 3,830 g Injection pressure (max): 2,090 bar Plasticising rate: 112 g/s (for PE-HD, L/D = 22) Injection nozzle: Herzog, needle type, pneumatically actuated shut-off, HP1.1 type, Ø12 mm orifice, M30×2 thread, adapter for ENGEL; no standard nozzle supplied Injection Unit Two injection cylinders with compact design M3 plasticising barrel, bimetallic, corrosion and wear resistant, operating temperature up to 350°C S4V screw Ø105 mm, heat-treated, nitrided, chrome plated, with hardfacing; R9 non-return valve 2D mixing head Ø105 mm TMR mixer Ø105 mm Material hopper with a capacity of 300 l and magnetic grid Clamping Unit Bedpfx Aew U Tcmolbswt Hydromechanical, two-platen system Four high-pressure short-stroke cylinders on nozzle side Four locking nuts on the ejector side Two rapid traverse cylinders (diagonal assembly) Special platen design – horizontal and vertical knockout holes Mould cooling: 10-fold rotameters (0-30 l/min), total of 20 circuits (10 per platen) Variant A: Reduced minimum mould height to 400 mm, maximum daylight maintained (2,400 mm), and increased opening stroke

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold thickness: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Bwjdpfxezypawj Albst Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 ccm Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s Injection rate into free air: 700 g/s Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 4x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 12x

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Bjdpfx Aew U Sz Iolbswt Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Bedpfx Alow U Rcdsbjwt Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Bjdpjx I Rqcjfx Albjwt

Year of construction: 2012, condition: used, A Sabal backpart moulding machine for shaping shoe counters and heel areas is offered. Hot activation stations: 2, cold pressing stations: 2, quick-change device for pads and lasts, pincer pull device: adjustable with millimetric precision, pincer pull at activation and pressing stations, valve monitoring, mechanical stops at the pressing stations, switchable heated pressing station for processing Lefa counters, flanging function. Weight: approx. 600kg, machine dimensions X/Y/Z: approx. 1760mm/800mm/1750mm. Documentation available. An on-site inspection is possible. Bodpfozvghwjx Albjwt

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 500 kN, total length: 3,395 mm, total width: 1,000 mm, total height: 2,000 mm, overall weight: 2,510 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine, fitted with the Procan Controller. Bjdpfxjzx Ukfo Albswt Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 50M which is very similar to the BOY 50M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN Bwjdpfx Aew U N Ixslbjt ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm Bwodpjyc Ewxjfx Albot - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bjdpfx Aezh N Tyslbowt

Condition: used, Year of construction: 2024, clamping force: 650 kN, displacement volume: 2,212 cm³, injection pressure: 2,090 bar, overall weight: 28,000 kg, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bsdpfx Asy Tbzvjlbewt

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 12 28 895, total height: 2,500 mm, total length: 3,000 mm, total width: 1,000 mm, load capacity: 400 kg, main lifting speed: 8,000 mm/min, fine lifting speed: 33 mm/s, throat depth: 2,800 mm, working height: 2,500 mm, Technical specifications Manufacturer: STAHL Fördertechnik GmbH Type: T202 Load capacity: 400 kg Year of manufacture: 1995 Supply voltage: 380 V / 3-phase / 50 Hz Lifting speed: 8 / 2 m/min Motor power: 1.3 / 1.1 kW With pendant control, chain and hook Complete with column-mounted swivel arm STAHL lifting equipment is reliable and durable, even in industrial environments. The T202 model, a 400 kg chain hoist, is known for its lifting speed of 8/2 m/min. Condition Used, industrial equipment in good condition. Sold in the complete condition as shown in the pictures. Price: 1,000 EUR STAHL 400 kg Electric Jib Crane with Electric Chain Hoist – 1,000 EUR Description For sale is a STAHL electric jib crane complete with an electric chain hoist, pendant control and lifting chain. The unit is in good used condition and is ready for operation. STAHL is a well-known German manufacturer of high-quality industrial lifting equipment, recognized for its reliability and long service life. Technical Specifications Bwjdszkam Aepfx Albst Manufacturer: STAHL Fördertechnik GmbH Model: T202 Load Capacity: 400 kg Year of Manufacture: 1995 Power Supply: 380 V / 3 Phase / 50 Hz Lifting Speed: 8 / 2 m/min Motor Power: 1.3 / 1.1 kW Electric Chain Hoist Pendant Control Included Lifting Chain and Hook Included Complete Jib Crane Assembly Condition Good working condition Complete unit Ready for installation Industrial quality German equipment Included Electric chain hoist Jib crane Pendant control Lifting chain Hook Price: €1,000 Location: Hungary Seller: Variflux Kft.

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Bjdpfx Ajx Eirqelbowt Screw diameter: 18 mm

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Bwodpfx Aszump Eolbst Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Bwodpfx Aljub Umqsbst Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, screw diameter: 32 mm, This Dr Boy injection moulding machine is currently in storage at Plastima Used Machinery. The machine is from 2007 and has relatively few operating hours for its age. - Brand: Dr Boy - Model: 55M - Year of manufacture: 2007 - Screw diameter: 32 mm - Shot volume: 96.5 cm³ Bjdpfxjzuk E De Albjwt - Clamping force: 55T - Operating hours: 24,210

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm Bwjdpsd Supgefx Albst pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Bedszrngyopfx Albowt Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Bedpfx Alezt I Srobewt Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Year of manufacture: 2011 Serial number: 218960 Bjdpfx Aox Eithslbjwt Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm