Used Agilent 34970A Data Loger for sale (16,831)

Condition: new, empty load weight: 10,500 kg, maximum load weight: 29,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 pairs of wheel recesses with covers, axle load scales, total loading platform length approx. 10,250 mm, lowbed approx. 7,150 mm long, loading height approx. 890 mm, 24 x lashing points, each 10 tons, 40 x lashing points, each 3 tons, loading ramps (approx. 3,100 x 760 mm), climbing rail on the outside of the ramps and rear slope, loading ramps adjustable laterally, wooden floor 68 mm thick, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load displays, vehicle hot-dip galvanized, surcharge for: hydraulic adjustment of the ramps = price: €1,000, -- subject to printing errors, mistakes and changes, sample images --, more data at: !, More Details: ! Itsdoz Sx Sxopfx Ahbjn

Condition: new, empty load weight: 3,490 kg, maximum load weight: 8,110 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side walls 600 mm high, galvanized, + lattice extension 1,000 mm high, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear walls, side walls pivoting and foldable, side walls with spring relief, floor made of fine-grained steel 4 mm, 12 x heavy-duty tie-down points recessed in the floor, tipping angle: 50 degrees rearward and 45 degrees sideways, continuously adjustable drawbar height, rear supports pluggable, geared support winch with load and fast gear, front, receiving shaft for two aluminum ramps integrated into the chassis, contour marking according to ECE R 048, surcharge for aluminum ramps, load capacity per pair 10 tons and 2 x folding supports, rear, ramps suitable for steel-tracked vehicles and rubber-tired vehicles, price: 1,900 euros, -- printing errors, errors and changes reserved, sample images --, more data at: !, More details: ! Isdpfx Aez Sx Uyjhbstn

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm drop sides, steel drop sides, hot-dip galvanized, lateral with central stanchion, pluggable, chassis: hot-dip galvanized, wooden floor, 16 lashing eyes in the outer frame, rear slanted, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood! Loading height: 880 mm, , Also available in loading area length 6.70 m Immediately available, , Rental price from 580 Euro, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Iodpfx Ahez Sx U Hjbotn

Condition: new, empty load weight: 3,780 kg, maximum load weight: 10,620 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, suspension: steel, tire size: 215 /75 R 17,5, color: other, gearing type: other, front tire size: 215 /75 R 17,5, rear tire size: 215/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm drop sides, chassis: hot-dip galvanized, wooden floor, 10 lashing eyes, 2 x ramps (2,500 mm x 500 mm), ramps with spring jack, twin tyres: 8 compartment 215 /75 R 17.5, geared support winch with load and fast gear, front, 2 folding supports, rear, loading height approx. 850 mm , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Itsdpfxoz Sx S Sj Ahbjn

Condition: new, empty load weight: 3,090 kg, maximum load weight: 8,510 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, sideboards 500 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear sideboards, side sideboards pivoting and foldable, side sideboards with spring relief, platform floor made of fine-grained steel, 4 mm thick, 12 x heavy-duty lashing eyes recessed in the floor, tipping angle: 50 degrees rear tipping angle and 45 degrees side tipping angle, continuously adjustable drawbar, rear stakes can be inserted, geared support winch with load and fast gear, front, integrated receiving shaft for two aluminum loading ramps in the chassis, contour marking according to ECE R 048 regulation, surcharge for aluminum ramps, load-bearing capacity per pair 10 tons and 2 x folding supports, rear, ramps suitable for steel-tracked vehicles and vehicles with rubber tires, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more data at: !, More details: ! Iedpfxjz Sx Tcj Ahbetn

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Itjdpfx Ajz Syaqehbsn

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, loading space width: 3,000 mm, loading space length: 10,000 mm, loading space height: 2,600 mm, Villex Ultra Giant Cube Blanc 1.0 – Gigantic Premium Space Container, 10.0 x 3.0 m (30 m²) Are you looking for a particularly large, representative, and flexible space solution? The Villex Ultra Giant Cube Blanc 1.0 from Villex Container GmbH offers you 30 m² of usable space in one unit! Thanks to its extra width of 3.0 m and its XXL length of 10.0 m, this large-space container is ideal as a spacious office, break room, sales area, training room, or storage space. 🔹 TOP FEATURES * Huge amount of space: 30 m² of open space for individual layouts and maximum usage possibilities. * Timeless design: Elegantly contrasting exterior panels in gray-white (RAL 9002) with an anthracite-colored base frame (RAL 7016). * Flexible access: Equipped with 2 insulated steel doors for optimal accessibility. * Usable all year round: 5 cm thick ISO-PUR sandwich panels (polyurethane) guarantee excellent insulation and a comfortable indoor climate in every season. * Bright interior: Two double-glazed standard windows (1000 x 1000 mm) provide sufficient daylight. 🔹 TECHNICAL DATA & EQUIPMENT * Model: Villex Ultra Giant Cube Blanc 1.0 * Manufacturer: Villex Container GmbH * External dimensions: 10.00 m x 3.00 m x 2.60 m (L x W x H) * Area: approx. 30.0 m² * Weight: approx. 2,200 kg (robust, durable steel construction) * Panel color: RAL 9002 (gray-white) * Frame color: RAL 7016 (anthracite) Iodpfx Asz S Ngaehbjtn * Insulation: 50 mm ISO-PUR sandwich panels * Doors: 2x insulated steel doors * Windows: 2x standard windows with double glazing (1000 mm x 1000 mm) 🔹 ELECTRICAL EQUIPMENT (READY FOR IMMEDIATE USE) * Power connection: 1x 32A CEE external plug (red) * Sockets: 3x double sockets * Lighting: 2x LED lighting units * Switch & safety: 1x light switch + fuse box with RCD 🛠 INDIVIDUAL CUSTOMIZATIONS Do you need additional features for your large-space container? We will adapt everything to your wishes: * Air conditioning: If desired, an air conditioning system (cooling & heating) can be installed. * Sanitary & kitchen: Installation of a toilet, shower, sink, or kitchenette. * Security: Roller shutters, safety glass, or additional locks. * Room layout: Installation of partition walls or additional interior doors. 🚚 DELIVERY & SERVICE * Delivery: Fast nationwide delivery directly to your desired location. * Assembly: Easy assembly – ready for immediate use. 📞 INTERESTED OR HAVE QUESTIONS? Write us a direct message or call us! We will gladly provide you with a non-binding consultation for your project and create a customized offer. (Office container 10x3, large-space container, modular construction 30m², residential container 10m, training room, break room, sales container, Villex Ultra Giant Cube, container gray-white RAL 9002, double container alternative, XXL container)

Condition: used, total height: 1,500 mm, total length: 5,500 mm, total width: 1,100 mm, Year of manufacture: 2022 Colour: White Weight: 1.650 kg Price: On request - Year: 2022 - Documentation available: Yes - └ Type Documentation: Electrical diagrams, Operating system, User manual, Technical data - └ Language: NL - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: Yes - Serial number: 1000054777 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - - Tools available: Yes Itsdpfxjzx Aghs Ahbsn - └ 4th unit type: Fine milling unit - └ 5th unit type: Corner rounding unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit - └ 8th unit type: Brushing unit - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 5 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 50 - Min. panel length [mm]: 150 - Max. panel length [mm]: 3200 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Type of glue: PUR/EVA - Voltage [V]: 400 - Current consumption [A]: 22 - Power [kW]: 11.9 - Transport dimensions: 5500mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, The last maintenance carried out by the manufacturer took place in December 2025. Itedpfx Ahjzrx A Esbjn The plant is still in operation and can be viewed at any time. Including dismantling and loading; expected to be available from November 2026 Technical data: - Spindles: 4 - Spindle 1: Bottom / 15 kW / 50 mm / 6,000 rpm - Spindle 2: Right / 15 kW / 50 mm / 6,000 rpm - Spindle 3: Left / 15 kW / 50 mm / 6,000 rpm - Spindle 4: Top / 18.5 kW / 50 mm / 6,000 rpm - Working width: 230 mm - Working height: 160 mm - Feed rate: 11 kW / 60 m/min - Control system: Memory Plus System

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. Iedpfx Ahoz Srm Nebotn 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Itsdpfxsd E Ixzs Ahbjn • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Itedpez Sr Uyjfx Ahbjn Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: excellent (used), For sale: an industrial submersible pump with a 7.5 kW three-phase motor, equipped with a power cable with a power plug and a flanged discharge connection. Data read from the nameplate: Motor power: 7.5 kW Supply voltage: 380 V Rated current: 17 A Rotational speed: 2850 rpm Performance range: 0–160 m³/h Head range: 35–0 m Power factor cos φ: 0.92 Insulation class: F Serial number: 8353767 Itodpfxsz Sphmo Ahbsn The maximum flow rate and maximum head refer to different operating points of the pump. Equipment and construction: Metal housing. Lower suction basket. Base for vertical positioning. Lifting eye. Flanged discharge connection. Power cable with power plug. Condition: used, visible signs of wear, scratches, and corrosion on the discharge connection. The visual condition is shown in the photos.

Condition: excellent (used), For sale: EMU KS 24 industrial submersible pump, equipped with a power cable with a CEE power plug and a discharge connection with a Storz-type coupling. Technical data from the nameplate: Manufacturer: EMU Unterwasserpumpen GmbH, Hof, Germany Model: KS 24 Motor designation: F 13.1-2/9 Power: 2.36 kW Power supply: 400 V, three-phase Frequency: 50 Hz Rated current: 4.7 A Rotational speed: 2900 rpm Winding connection: star (Y) Year of manufacture: 1994 Approximate performance according to an additional chart: Head Approximate flow rate 0 m — free outlet 59.5 m³/h 5 m 52 m³/h 10 m 45 m³/h 14 m 38.5 m³/h 18 m 20 m³/h Iodpfx Aoz Sphyshbetn

Condition: excellent (used), For sale: a Rapid 1514 shredding mill from the Range 15 series. The machine has been inspected and is in working order. It is suitable for shredding appropriately selected materials, including plastic waste. The unit features a feed hopper, a cutting chamber with blades, an electric motor, and a control panel with an emergency stop switch. The photos also show the interior of the working chamber. Data from the nameplate: Itedpfx Ahjz Spffsbjn - Manufacturer: Maskin AB Rapid, Sweden - Type: 1514 - Series: Range 15 - Year of manufacture: 1994 - Machine number: 260319 The machine is used and shows signs of wear, which can be seen in the photos. The condition and scope of equipment are shown in the photographs.

Condition: used, Year of construction: 2003, Overview This KKT Kraus KLC 126 N is an air-cooled industrial chiller, built in 2003. It runs on refrigerant R407C, with the condenser fans on top and the control cabinet built into one end face. It served a Krones Contiform S24 blow moulder and was in production until March 2026. Dismantled in October 2026, it is now stored and ready for loading. Technical data - Manufacturer: KKT Kraus - Model: KLC 126 N - Year of manufacture: 2003 - Machine type: air-cooled chiller - Refrigerant: R407C, max. filling weight 43.5 kg - Max. operating pressure: 28 bar - Power supply: 400 V, 3 phases, 50 Hz - Max. power input: 64 kW Iedpfez Sp Nhsx Ahbetn - Max. current consumption: 118 A - Main fuse: 160 A - CE marked Equipment - Air-cooled condenser with axial fans on top of the housing - Integrated control cabinet with digital temperature controller, indicator lamps, selector switch and main switch - Pipe connections on the end face opposite the control cabinet - Enclosed steel housing Condition Used chiller from 2003, in production until March 2026. Dismantled in October 2026 and stored. Availability Available immediately. Location: Germany.

Condition: used, JOHANNSEN Type T 95 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Iedpfx Ahjzryw Debjtn Technical data: - Grinding length: approx. 2,780 mm - Grinding width: approx. 950 mm - Motor: 6 kW

Condition: excellent (used), For sale is an industrial LOHER DYNAVERT frequency inverter with a control panel and display. Technical data: Manufacturer: LOHER Series: DYNAVERT Type: A 2T2A-07400-002BADIP4 MLFB: 6SE0102-1AA15-5AA5-Z EP-No.: L4-100001462 Serial number: 7395649 Year of manufacture: 2011 Supply voltage: 3 × 400 V Input frequency: 50–60 Hz Input power: 3.7 kVA Output voltage: 3 × V Output frequency: 0–250 Hz Maximum output power: 3.8 kVA Output current: 5.5 A Ambient temperature: 0 to +40°C Protection class: IP20 Designation: S9 Integrated TMS thermal protection tripping device Isdpfx Ahez Spbmjbjtn EC type examination certificate Certificate: PTB 07 ATEX 3057 ATEX marking: Ex II (2) GD Terminals: X3: 90/91 Made in Germany The frequency inverter is used and comes from the dismantling of an industrial installation. Its visual condition is good, with normal signs of use and storage visible in the photos.

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Iedpsg Dgr Hsfx Ahbotn Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide Itjdpocrnm Nofx Ahbon start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: excellent (used), Year of construction: 1983, Longitudinal Flow Dryer – Heating via Electricity or Hot Water Internal chamber length approx. 4500 mm Internal chamber width approx. 750 mm Itedpfsy Emqgox Ahben Internal chamber height approx. 600 mm Chamber volume 2.0 m³ Top loading – trunk design Manual / fully automatic control Electronic controller type C Longitudinal ventilation Number of fans: 1 Fan motor power 0.55 kW, 400 V, 50 Hz Electric heater: 4.2 kW INCLUDES: Aluminum stacking strips Wood moisture measuring probe Operating manual, electrical diagram, etc. Space requirement approx. 5600 mm x 1200 mm x 1600 mm Weight: 400 kg Note on used machinery: • Technical data subject to errors and prior sale. • Quoted prices are ex-location – free loading! • Machines have been cleaned and function tested. • All machines are bought as inspected, without any warranty claims. Buyers are free to inspect the machines on site. • Special agreements only valid in written form. (We will respond to inquiries only if your address and telephone number are provided!)

Condition: reconditioned (used), Year of construction: 2002, KASTOpos GA 4" Fully automatic miter bandsaw machine – KASTO Type/Model: KASTOpos GA 4 Condition: Used, partially overhauled in 2026 Year of manufacture: 2002 Work performed / partial overhaul • Machine thoroughly cleaned and technically inspected • Machine housing and machine body repainted Ijdpfx Asz Sqlkehbotn • Mechanical, hydraulic, and electrical functions checked • Saw blade, material clamping device, and feed system checked and adjusted • Band guide and all machine movements checked for proper function • Safety and control elements checked • Necessary repair work carried out as part of the partial overhaul • Final complete functional test performed • Roller conveyor disassembled, cleaned, technically inspected, and repainted • Rollers and bearing points of the roller conveyor checked • Roller conveyor then reassembled and functionally tested The machine is in technically sound and visually well-maintained condition. This is a partial overhaul, not a complete mechanical general overhaul. Technical data Cutting range at 90°: Round 400 mm, Flat 400 x 320 mm, Square 320 x 320 mm Cutting range at 45°: Round 320 mm, Flat 320 x 320 mm, Square 320 x 320 mm Cutting range at 60°: Round 240 mm, Flat 210 x 320 mm, Square 220 x 220 mm Cutting speed, stepless: 16 to 160 m/min, frequency-controlled Material feed (single stroke): max. 750 mm Shortest remaining piece length: Automatic: approx. 100 mm Single cut: approx. 10-30 mm Saw motor power: approx. 4.4 kW Total connected load: approx. 7.4 kW (380 V / 50 Hz) Machine weight: approx. 3,000 kg Inquiry item: Shipping costs will be provided in a separate quote.

Condition: used, WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Technical data: - Year of manufacture: 1997 Iodpoztv A Sjfx Ahbjtn

Condition: ready for operation (used), Year of construction: 2016, laser power: 2,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, table load: 920 kg, number of axes: 3, This 3-axis AMADA LCG 3015 AJ fiber laser cutting machine was manufactured in 2016. It features a maximum continuous laser power of 2,000 Watts and an impressive X-axis travel of 3,070 mm. The machine includes an automatic palletizing system and a lightweight HS cutting head with advanced safety measures. If you are looking to get high-quality cutting capabilities, consider the AMADA LCG 3015 AJ machine we have for sale. Contact us for further details. • CNC control: AMADA AMNC-F with 15" touchscreen, 1 MB memory Iodpfx Aez S Nfcjhbjtn • Control features: Auto-diagnostic system, laser power feedback control, USB/Ethernet ports, CD drive, LAN interface, cutting data library database, part/sheet counting, logical search function, production time measurement • Max material thickness: • Mild steel (ST 1203): 10 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 8 mm • Copper: 4 mm • Brass: 5 mm • Cutting speed: 0–120 m/min • Machine weight (with interchangeable table): 8,200 kg • Cutting head: Lightweight HS head with capacitive sensor for constant distance, rapid-change lens/nozzle system, 5 protective safety measures • NC focusing function: Automatic focus adjustment via CNC and optics for varying materials/thicknesses • Positioning diode laser: Assists in approaching positions and working with residual sheets/trimmings Additional equipment • Pallet changer: Automatic palletizing system with pneumatic thin-sheet clamping and roller table for easy positioning • Extraction and chiller: Multi-chamber extraction with self-cleaning filters; closed-loop cooling unit for laser, focusing mirror, lens, and drives

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing boards and planks and features stepless feed and cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Stepless feed Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm length × 600 mm diameter Isdpfx Ahezxrtqobjtn Equipment: Resawing device for cutting boards and planks programmable cutting depth control ELGO Electric Type 87P pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm heavy-duty industrial design Condition and scope of supply as shown in the photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site, but would be available shortly! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Subject to errors, prior sale and changes. All information without guarantee.