Used Waco Hm Universal 200 for sale (19,923)

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Nsdpfx Afogkgwfoasla Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Nljdpfxoyub Hms Afasa Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Nlodpfx Afsihf Tweaoa Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: good (used), Please refer to the images for all technical specifications. Nedeym Aptspfx Afaola

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display Nlodjymm Erspfx Afaea - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Njdsyttv Repfx Afaela

Year of construction: 1976, condition: ready for operation (used), I sell the tenoning machine for parallel grooving for the bands in the pallets production, or some other similar product. WACO T2-SL Nlsdpfx Afeh Hp U Seasa Year 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available immediately. Including documentation.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, overall weight: 122 kg, LASER IN LIKE-NEW CONDITION, USED ONLY FOR TESTING AND DEMONSTRATION PURPOSES Laser cutting and engraving machine for the signage and promotional marketing industries - made in USA ▪ CO2 laser tube in a sealed metal housing, 25 KW power, air-cooled, 10,640 nm wavelength, approximately 30,000 working hours lifetime. ▪ The laser source can be quickly replaced using the 'Quick-Change' system, without technician intervention or the need to realign the laser beam. Universal manufactures only RF-Excited sealed CO2 laser sources, which provide constant power output and require no maintenance. ▪ Maximum material dimensions: 737 x 584 x 229 mm, but larger materials can also be processed as the front side is open. Nedpfxjytdtyo Afajla ▪ Working area: 610 x 457 mm ▪ Honeycomb cutting bed - minimizes contact between the material and the reflective engraving table and more efficiently removes particles and fumes generated during cutting ▪ Maximum supported material weight: 18 kg ▪ Machine dimensions: 914 x 965 x 914 mm ▪ Electrical connection: 220 – 240V / 5A The package includes the following optional features: ▪ BOFA filter, 400 m3/h air flow – allows use even in enclosed commercial spaces ▪ Focusing lens with a 2.0” (5.08 cm) focal length and 0.125 mm focal spot diameter ▪ HPDFO focusing lens + beam collimator. Focal length: 2.0” (5.08 cm), Focal spot diameter: 0.025 mm – Suitable for marking metals ▪ Rotary attachment included – maximum object diameter for rotation: 203 mm ▪ “Air-Assist” cooling and cleaning system – Delivers a clean air jet over the material surface to suppress flames and improve engraving/cutting quality. Also helps to clean the equipment’s optical components (mirrors + lens) ▪ Metal cone for directing airflow at 90 degrees onto the material ▪ Back-Sweep – hose for directing airflow at 45 degrees onto the material ▪ 2 bar pressure compressor – PICCOLINO brand, supplies clean air for the “Air-Assist” system ▪ ‘Laser Interface+’ operating software: user interface allowing for automatic or manual control over power, movement speed, laser pulses (PPI), and other system settings. Includes a materials database with predefined settings according to the processed material; simply select the material type from the list and the driver loads the optimal parameters for cutting/engraving. Settings for custom materials not in the standard database can be saved, stored, and loaded. To maximize processing efficiency, the interface can estimate the remaining time for engraving or cutting. ▪ Additional 1Touch Laser Photo software – for high-precision engraving, including for complex image engraving.

Condition: new, Year of construction: 2021, operating hours: 1 h, functionality: fully functional, overall weight: 33 kg, load capacity: 10 kg, arm reach: 1,350 mm, At Automex, we don’t just supply robots – we use them daily in our own production. This hands-on experience enables us to confidently recommend only solutions that truly work. Universal Robots UR10 – Collaborative Robot (Cobot) ----- Last on stock ! ----- ----- €16 000 net ----- Condition: Brand new (max 20days) Year of manufacture: 2021 Warranty: Full start-up warranty – all functions tested and certified Origin: Original production by Universal Robots, Denmark Delivery: Price includes shipping to any location within Europe The UR10 is one of the most popular and versatile collaborative robots on the market. With its high payload capacity and long reach, it is ideally suited for a wide range of industrial applications – from machine tending and packaging to assembly and pick-and-place. Its intuitive programming environment makes it an excellent choice both for mass production and flexible, small-batch operations. Technical specifications (UR10): Payload: 10 kg Reach: 1,300 mm Degrees of freedom: 6 rotary joints Repeatability: ±0.05 mm Robot weight: 33.5 kg Power consumption: approx. 350 W Mounting options: floor, ceiling, or wall Programming: intuitive URCaps environment + integration with external systems (ROS, Modbus, Ethernet/IP, PROFINET) Safety functions: compliant with ISO 10218-1 and ISO/TS 15066 The Universal Robots UR10 has been designed for safe human-robot collaboration. Its flexibility, precision, and ease of deployment make it the perfect solution for companies looking to automate quickly and effectively, without compromising safety or versatility. We offer a full range of Universal Robots cobots as well as used units from brands such as AUBO, YASKAWA, and ABB. Please feel free to inquire! Nljdpfoxf Ibqox Afaea The cobots shown are used in Automex production and may be a different model than the one proposed in the advertisement.

Condition: like new (used), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, machine/vehicle number: 20235201901, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 720 °, controller manufacturer: universal robots, input voltage: 220 V, Equipment: documentation/manual, Collaborative robotic arm UR10e from Universal Robots. First commissioned in February 2024, practically new, with very little use (the project was cancelled). Includes a base that can be moved with a pallet truck. - Model: UR10e - Payload: 12.5 kg - Reach: 1300 mm PRICE: 22,000 € + VAT Delivered in its original boxes with User Manual. (Can be delivered mounted on the base upon request). Nedpoyrx Dkjfx Afasla Buyer can verify correct operation prior to delivery.

Condition: used, mileage: 440,411 km, power: 65 kW (88.38 HP), first registration: 05/2008, fuel type: diesel, overall weight: 3,000 kg, gearing type: mechanical, number of seats: 2, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: 13-pin trailer socket, 100 Ah battery, single-pole battery master switch, rear door (270-degree opening angle), wooden floor in cargo area, spare wheel with road tires, spare wheel carrier under end of frame incl. jack, cab seats: passenger double seat, front stabilizer, rear door step, interior cladding in load/vehicle compartment: plywood Additional equipment: Third brake light, driver’s side airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors, both sides, exterior mirrors with integrated indicator light, brake assist, cab roof lining, lockable glove compartment, body/superstructure: high roof van, child safety lock, fuel tank: main tank 75 liters, continuous partition wall in cargo area, cargo securing lashing rings, headlight range adjustment, engine 2.1L – 65 kW CDI CAT, wheelbase 3665 mm, low emission according to Euro 4 Gr. III, sliding door to the right cargo/passenger compartment, Assyst maintenance interval display, heat-insulating glazing, permitted gross weight 3.00 t Nljdpjkq Al Njfx Afaja * WDB9066131S280012 * First registration: 20.05.2008 * Net price Tel./WhatsApp:

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Nljdpsud R T Ssfx Afaja

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 2050x200 2 speeds Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Useful length : 2050 mm Top roll diameter : 200 mm Side roll diameter : 180 mm Motors total power : 5,5 KW Working speed : 3m/min. - 6m/min. Weight : 3750 kg Dimensions (mm) : 3850 x 1350 x 1290 (L x W x H) Performance data bending 10 mm at smallest inner diameter of 1000mm ( 5 x top roller ) 8 mm at smallest inner diameter of 300mm (1.5 x top roller) Performance data bending 8 mm at smallest inner diameter of 1000 mm (5 x top roller) 6 mm at smallest inner diameter of 300 mm (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm2 yield strength Nlsdpfeh Ar Dujx Afasa Material ( ST 37 - ST 42 mild steel )

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Nedpfx Afjm Uykneasla

Year of construction: 2026, condition: new, functionality: fully functional, VH 3 Technical Data - Lifting arms with 3 joints, length 2140 mm (optional: 2500 mm). Pneumatic height adjustment, 6 bar compressed air connection. Lifting speed: 2 cm/sec. Max. tool weight, vertical: 50 kg. Max. tool weight, horizontal: 100 kg. WJS Tool Lifter • Improve your working conditions and protect your back. • No more heavy lifting or unnatural working postures during tool changes! • The ergonomic tool lifting device from WJS makes tool changes on planing machines significantly easier. • It doesn't matter if you want to change tools on the horizontal or vertical spindle. • The lifting device protects not only the operator but also the tool and spindle. • Tool changes become faster, saving your company costs and increasing productivity. • Whereas previously two people had to lift heavy loads, now one person can easily move the large tool weight. Ex works price. Delivery time: 10–12 weeks. 1 unit available from stock, subject to prior sale. Nodpfoym Rygjx Afasla

Condition: used, 200 running meters Pallet Rack Schäfer Palflex Used equipment in good condition, see pictures. Height: 6.5 m Depth: 110 cm, galvanized Bay load: 24,000 kg Beam length: 4.1 m, orange Load capacity per beam/level: 3,000 kg Negotiation price: €17,900 net ex stock The offer includes: + 49 pre-assembled frames, depth 110 cm, height 6.5 m + 288 beams, length 4.1 m, load capacity per level 3,000 kg + 576 safety locking pins + 196 concrete anchors Used corner guards available immediately at an extra charge of €15 each net! Load capacity plates, documentation etc. are of course included. Additional accessories are available in the accessories catalog. Goods are in stock. Transport and assembly available on request. Nlsdpfx Aovfnnzefaja Inspection possible at any time by appointment. Further information upon request. Over 5,000 running meters of pallet racks from various manufacturers always in stock. (Specifications, information and pricing subject to change and prior sale! Please see our Terms & Conditions. All prices ex VAT ex stock.)

Condition: used, Cutting height max. ca. 100 mm Nlodpfxjw Ng T Ue Afasa Chain width 300 mm Motor output 45 kW

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 Nedpoya Nf Iefx Afajla V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: like new (used), Year of construction: 2020, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 20205500907, overall weight: 35 kg, load capacity: 5 kg, arm reach: 850 mm, pivoting range: 360 °, teach pendant manufacturer: Universal Robot, The Universal Robots UR5e with Teach Pendant is an industrial robotic arm assembly designed for handling tasks. It has a reach of 850mm and a payload capacity of 5kg. Manufactured by Universal Robots in Denmark, this UR E-Series Flex Pendant includes a motion controller for precise operation. Ideal for automation across various industrial environments, this robotic arm provides flexibility and efficiency for both repetitive and complex tasks. The robot was purchased in 2021 and was only powered on to verify correct operation. It has never been put into actual use and is therefore in like-new condition. The total operating time is approximately 1 hour. Seller: SANXO-Systems Finnish-Hungarian Measurement and Automation Ltd. Nsdpfxex Tg E To Afajla

Condition: used, Year of construction: 2023, 2 units available - vintage 2018 and 2023. Nsdpfx Afeykvqfoajla Working condition! Possible to purchase also feeders!

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 200 mm. Mounting hole: 60 mm. Equipped with indexable inserts – easy handling, suitable for work under heavy industrial conditions. Very good condition, the tool is ready for use. An ideal choice for use in machining centers and industrial milling machines. Nsdpfxew Sav Ue Afajla

Condition: excellent (used), Complete high-performance planing line with WACO 6-head planer, double resaw bandsaw, full mechanization, moisture measurement, control system, etc. Truly complete! Capacity approx. 2,500–4,500 m3 per month and shift, depending on dimensions. Njdpfx Ajykmixjfasla

Condition: used, Plant: Used membrane filter press Type: Passavant Noggerath Application area: Sludge dewatering Design: Sidebar frame Filter plate size: 1200x1200 Number of plates: 100 units / membrane-mix Nsdpowy H Nrjfx Afajla Filter plates: PP Filter cloths: optionally available, tailored to the medium Press volume: approx. 2900 dm3 Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the plant possible by appointment at our facility.

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized Manufacturer: SLP leg A: approx. 200 x 140 mm leg B: approx. 200 x 38 mm opening dimension: approx. 52 x 32 mm Nlsdpfxjipuggo Afasa for rectangular tube: 50 x 30 mm Weight/pc.: 0.930 kg

Year of construction: 2020, condition: new, We offer here a new shelf connector of the manufacturer Nedcon NS for sale. Included in delivery are: 01x SET Spacer NR new Nodpfx Asf S Iq Tofaola length: 200 mm Material colour: sendzimir galvanized consisting of each: 01x spacer NR L=200, sendzimir galvanized 02x hexagon head screw 8.8 M10x25 galvanized 02x Toothed nut, hexagonal 8.8 M10 flange galvanised 04x hexagon head screw, M10 galvanized