Used Victory 330/125 Tech for sale (9,425)

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: Dexion Type: Speedlock P90 (Silverline) Isdpji E S Eysfx Ahysih Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: orange Crossbar type: 125|17 I-profile: 125 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,000 mm Maximum load per pair of crossbars: 2,400 kg, with evenly distributed load The shelf load capacities are only valid in conjunction with support P90/20. In addition, the load-bearing capacity of the hook must be checked depending on the bay load and the installation height. 02x Locking pins, used Design: fully galvanized For securing the longitudinal members against unintentional lifting out.

Condition: good (used), volume flow: 85 m³/h, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, Grundfos TPD pumps are single-stage, tightly connected in-line centrifugal two-head pumps, with mechanical shaft seal and primarily for applications such as heating / cooling / district power. Type: TPD 80-330 / 2 A-F-A-BAQE Technical Isdpfxjg I Utpe Ahysih pump speed: 2930 rpm Nominal flow: 85.6 m³ / h Nominal lifting height: 25.9 m Maximum lifting height: 33 m Actual impeller diameter: 157 mm Materials Pump housing: Cast iron Impeller: Cast iron Material code: A Installation Ambient temperature range: -30 .. 60 ° C Maximum operating pressure: 16 bar Max. Pressure at the specified temperature: 16 bar / 140 ° C Connection size: DN 80 Pressure value for connection: PN 16 Port-to-port length: 440 mm Flange size for motor: FF300 Pump Transported liquid temperature range: 0 .. 120 ° C Density: 998.2 kg / m³ Electrical data Engine: Rated power - P2: 11 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-415D / 660-690Y V Rated current: 12.0-11.8 A Starting current: 660-780% Rated speed: 2930 rpm Number of poles: 2 Housing classification (IEC 34-5): 55 Powder / Spray Insulation class (IEC 85): F Motor protection PTC Net weight: 303 kg Gross weight: 328 kg Purchase and purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. Ijdpfx Ahsfg E Hnoyoih reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: Iedpoty Swysfx Ahyjih 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Iiedpfjtzxh Tjx Ahyeh Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Iodpfx Aoukn S Hohyjih As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, TECHNICAL DETAILS - max. diameter over bed : 270 [mm] - max diameter over slide : 130 [mm] - distance between centers : 440 [mm] - spindle nose : CAMLOCK D1-3' - max bar diameter : 28 [mm] - power : 7.5 [kW] - spindle speed : 0-5000 [rpm] with variator - strokes X x Z : 180 x 400 [mm] - work feeds : 0-5000 [mm/min] with variator - quick feeds : 7500 [mm/min] - supply : tri 380V 50Hz 14kW - size : 1700 x 1226 x 1660 [mm] - weight : 1415 [kg] EQUIPMENT - numerical control FANUC 20-T Iiodpfx Ahsuhcarsysh - quick change turret Multifix 'A' - collets chuck SCHAUBLIN B32 - tail stock with capstan - coolant tank with pump

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Clamping system: Tiebarless ENGEL clamping system • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) Iodoz Dgrpepfx Ahyjih • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • Including GEKU robot

Condition: used, Year of construction: 2000, SCM Tech 99L Work Center Iijdpjtxdqcofx Ahyoh Year of production: 2000 Dimensions and weight for transport: mm 4.800x 230 h. 260 peso Kg. 2800

Condition: good (used), mileage: 742,717 km, power: 250 kW (339.91 HP), first registration: 07/2014, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,990 mm, total width: 2,550 mm, total height: 3,850 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power mirror, soot filter, spoiler, General information Cab: Globetrotter Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Iiedoz Hu I Djpfx Ahysh Transmission Transmission: Volvo i Shift, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Volvo Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 25%; Tyre profile right: 25%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.251 kg Carrying capacity: 11.749 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 Condition Technical condition: good Visual appearance: good Number of keys: 3 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Stability control - Toolbox - Visor - Webasto

Condition: excellent (used), mileage: 341,000 km, power: 243 kW (330.39 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, Year of manufacture: 2019 Year of construction: 2019 Suspension: air suspension Front axle: Steering; Tyre profile left: 60%; Tyre profile right: 60% Rear axle: Double wheels; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60% = Additional options and accessories = - Air horn - Aluminium fuel tank - Outside temperature display - PTO Iisdpfx Aez E N Rwshyjh - Radio/CD player - Suspension seat 2x = Remarks = In very good condition. Only 341,000 km

Condition: excellent (used), Year of construction: 2016, Technical specifications: Automatic cutting and beveling machine Pipe diameter: 50 – 330 mm Max. sheet thickness: 15 mm Cutting angle: 30 – 37.5° CNC control: PRO-Face Motor power: 30 kW CE mark Dimensions (length x width x height): approx. 3100 x 2600 x 2000 mm Machine weight: approx. 3.6 tons Additional equipment: 2 roller conveyors, each 6000 mm wide Chip conveyor Iedswlahlepfx Ahyeih The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, mileage: 222,000 km, power: 96 kW (130.52 HP), first registration: 02/2021, fuel type: diesel, maximum load weight: 1,100 kg, overall weight: 3,325 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,100 mm, loading space height: 1,900 mm, Year of construction: 2021, - Used Ford Transit 330 L2 H2 Van - September 2021, 2000cc Tdci 130hp engine, Euro 6D, 222,000 km. Iiodpeyaqxcofx Ahysh - 3-seater van with a cargo area measuring 3100 x 1900 mm, protective cargo area lining. - Air conditioning, ABS + TCS + ESP, Bluetooth radio, cruise control, power-folding mirrors, front and rear parking sensors, 235/65/16 tires, spare wheel, two keys. - Vehicle in good condition, tires at 90%, well-maintained bodywork, intact interior, single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified mileage. - Test drive possible by appointment. - Ownership transfer handled on-site. - Customized financing options available. Carlo Mauri Srl disclaims any responsibility for any unintentional discrepancies in the advertisement, which does not constitute any contractual obligation. The prices shown are exclusive of VAT and ownership transfer fees.

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment Ijdpfx Asx Enapshyjih • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Condition: excellent (used), mileage: 519,844 km, power: 243 kW (330.39 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, total height: 3,450 mm, loading space length: 7,420 mm, loading space width: 2,480 mm, loading space height: 1,980 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, = Additional options and accessories = - Air suspension - Aluminum fuel tank - Leaf spring - Radio/Cassette player - Radio/CD player - Rear view camera - Side door - Speed limiter - Sun visor = Remarks = Tail lift: dhollandia, slider lift WJMA1VNJ60C362547 = More information = Front axle: Steering Number of cylinders: 6 GVW: 19.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: EL336HA = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Isdpfx Asymrkaehyoih Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Electric chain hoist, electric lifting device, crane HADEF Ijdpfexcil Eex Ahyjih Load capacity: 125 kg Hook path: 3.8 meters Lifting speed: 10 m/min. Fine lifting speed: 3.3 m/min. 1 load strand

Condition: used, Year of construction: 1980, 1250 mm tank diameter / tank height 1000 / 350 mm Ijdjxq Hgvepfx Ahyjih turning speed range 920 / 1415 U/min voltage 380 V power requirement 1,9 kW volumn 125 Liter weight of the machine ca. 600 kg dimensions 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images

Condition: good (used), functionality: fully functional, Year of construction: 2006, mast type: telescopic, lifting power: 227 kg/m, empty load weight: 20,917 kg, fuel type: diesel, Equipment: all wheel drive, MACHINE: Telescopic boom lift BRAND: Genie MODEL: S-125 YEAR OF CONSTRUCTION: 2006 ENGINE: Diesel MAST: Telescopic DRIVE: 4X4 LIFT CAPACITY: 227 kg Iedpfx Ahoxn Imxjysih PLATFORM HEIGHT (MAX): 38.15 m WORKING HEIGHT (MAX): 40.15 m HORIZONTAL RANGE (MAX): 24.38 m CONDITION: Good

Condition: excellent (used), overall weight: 17 kg, jaw width: 125 mm, total length: 345 mm, clamping length: 150 mm, Modular vise, jaw width 125mm Gerardi Modular 125 Robust machine vise, drill press vise Overall length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw included Mechanical clamping operation using 19mm wrench or ratchet Iiodoxmk I Nopfx Ahyjh The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this supplier."

Condition: like new (used), Year of construction: 2023, GM – DC330MINI V4 Label Converter Year of Manufacture: 12/2022 _____ Machine Specifications and Equipment:  Max Webwidth: 330mm  Speed up to 65 m/min, semi rotary; 72 m/min full rotary  Unwinding max. 700 mm  Rewinding max. 450mm  Touch screen  Flexo Unit Corona  Webedge Control  Semi-rotary die cutting  Automatic register check  GEW – UV  Lamination  GM SmartCrush Iiodpfx Ajv Aa Twehyeh _____

Condition: used, mileage: 55,449 km, power: 92 kW (125.09 HP), first registration: 11/2006, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: automatic, emission class: euro3, loading space width: 1,740 mm, loading space length: 3,350 mm, loading space height: 1,870 mm, Year of construction: 2006, total length: 5,651 mm, total width: 1,974 mm, total height: 2,800 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, Well-maintained Ford Transit 125 T350 panel van L3/H3 with automatic transmission and shelving system +++ Steering wheel paddle shifters +++ Ex-government vehicle from the German Federal Police, regularly serviced with a full service history. This vehicle was used exclusively to handle breakdowns of fleet vehicles outside the facility. It was always kept in a dry, heated facility and is therefore in excellent condition. Features: - Automatic transmission with steering wheel shift paddles - Air conditioning - ABS - 2 airbags - Individual front seats with armrests - Electric mirrors - Central locking with remote - Rear doors with 270° opening angle - Rear step - Side sliding door with window - High, closed rear wing doors - Roof-mounted rear strobe lights Cargo area: - Wooden flooring with shelving system - 220V external power supply with fuse box and on-board sub-distribution - Roof cutout with Plexiglas insert for daylight in the cargo area Iisdoyumpajpfx Ahyjh Full service history, last inspection at 54,064 km Very good all-season tires from DOT 2018, 7.5/8.0 mm tread depth, no signs of cracking (vehicle was stored indoors, shielded from UV light) Cargo area dimensions: 3350 x 1740 x 1870 mm (L x W x H) This Transit drives well and the automatic transmission shifts smoothly; also an ideal base for a camper conversion. +++ Subject to error, modifications, and prior sale +++

Condition: used, mileage: 131,000 km, power: 103 kW (140.04 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, Colour White, Permissible gross weight: 3,000kg, COMMERCIAL VEHICLES Peugeot Boxer 330 Panel Van SERIES COLOUR: WHITE YEAR: 2021-02 KM: 131,000 GVW: 3,000 ENGINE CAPACITY: 2,179 Euro 6 FUEL: DIESEL Iiedpfjx Ibrkex Ahyoh

Condition: used, Year of construction: 2020, _____For sale on behalf of a customer: Pöttinger Impress 125 F PRO, first used in 2021. Bale counter: 5,000 bales. 32 knives. Central lubrication system. Air pressure system. Isobus without terminal. Very well maintained. For sale due to a change to a combination press/wrapper. The press is immediately available. Price: EUR 34,900.00 net (+19% VAT). Location: null. Ijdpfx Ahszx Ityeyoih

Condition: new, Hello, I would like to offer high-pressure KSB pumps with ABB electric motors. Iijdpfx Ahjzx Upzeyeh Applications for the pumps: - Chemical industry - Fuel industry - Gas industry - Paper industry I have various models available: - 5 units: MCPK150-125-200 VX LXM - 5 units: MCPK065-040-200 VC EXM - 2 units: MCPK100-065-200 VC LXM - 2 units: MCPK080-050-315 VC EXM The stated price is for 1 complete pump with motor, model MCPK150-125-200 VX LXM. If you are interested in a different pump model, please contact me.

Condition: excellent (used), Year of manufacture: 1973 Isdpfxjzyyn Sj Ahyoih Distance between centers: 500 mm Distance between centers (vertical): 125 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 120 mm Spindle bore: 32 mm Spindle nose: Camlock D1-3 Spindle speed: 225 - 3000 rpm Tailstock quill: MK 2 Weight: approx. 930 kg Dimensions W x D x H: approx. 1473 × 730 × 1280 mm Condition: very good Accessories: see pictures Through hole in the chuck: 28 mm Collet system: Schaublin B32 Automatic feed: 4 - 260 mm/min Cuttable metric threads: 0.25 to 8 mm Cuttable inch threads: 112 to 3 threads per inch