Used Tth Single-Phase Isolation Transformer for sale (13,111)

Condition: new, capacity: up to 1 000 kg/h power: drive Motor: 0,75 kW brush cleaning: 0,37 kW high-pressure cleaner: 4,7 kW electric outlet: 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 2 145 mm width: 1 270 mm height: 1 290 mm insertion resp. discharge height: 1 290 mm belt width: 580 mm spread width: 240 -460 mm spread height (9 stages): 10 - 50 mm weight: 665 kg material: 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuous): 2,1 - 5,5 m/min lead time: 0,6 - 1,6 min water consumption for cleaning: 3 l/min connections: sewage Connection: DN75 juice discharge Connection: 1 ½ “ juice discharge height: 305 mm sewage discharge height : 86 mm pomace discharge height: 745 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor Codpfx Aedix Icslbjhb

Condition: used, Ex signal isolator, isolated barrier -K series -Product number: 14493S Chsdpfxedngwij Albsb -Explosion proof -Number: 5x available -Price: per piece -Dimensions: 95/70/H18 mm -Weight: 0.1 kg

Condition: good (used), Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-M -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 22 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 65 mm -Brake -Protection class: IP 54 -Number: 4x motors available Chjdpfx Aljb A Iyxebeb Price: per piece -Dimensions: 1150/300/H400 mm -Weight: 180 kg

Year of construction: 1990, condition: refurbished (used), Our Best Sellers! Cjdpfxe A Nbve Albehb Extremely dynamic short circuit protection, therefore excellently suited for rugged industrial use with high Schalthaeufigkeiten, electrical loads and harmonic components. Stable boiler. Reduced losses (Po / Pk between BA 'and A-C'). Available with outer-cone Elastimold Steckdurchfuehrungen, of course, also with HV / LV-sided porcelain execution. Transformer is always equipped with a dial thermometer with two contacts and pointer, with optional transformer DGPT2 full protection. Ausdehnerversion with 2-float Buchholz relay possible. Delivery to a series of 35 QUANTITY devices. 12 months warranty.

Condition: used, Year of construction: 1984, load capacity: 3,200 kg, Currently, 3 units in stock. Chedpfxsw Ugu Ae Albeb Single-girder semi-gantry crane Manufacturer: Christmann & Pfeifer KG Hoist: Demag Design size: PLV 168 NF Load capacity: 3,200 kg Travel unit: Demag Type: 13/6PF 12/4 Usable hook travel: 4,800 mm Rail gauge (center-to-center): 8,110 mm Weight: approx. 2 t/unit Price quoted per unit, free loaded. The cranes have already been dismantled and are packaged ready for transport. The machine can be inspected on site. All information is provided without guarantee. Interim sale reserved.

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR, Hot Air Cedpex A Tgyofx Albjhb Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm Codpfjx Dkyysx Albjhb - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: used, Year of construction: 2004, machine/vehicle number: 114465, For sale Used Konecrane single girder suspension crane 9,334 mm x 2t We can supply the cranes including: Codpsuvikzefx Albehb * assembly and inspection * power rails * radio control * master controls Jan Reiling B.V. also supplies new DEMAG cranes completely customized at very competitive prices. * overhead cranes * Suspended cranes * Slewing cranes * KBK rails cranes * boat elevators All our new and used cranes which we deliver assembled are delivered including warranty! In addition, we have our own stock of about 15,000 Demag parts.

Condition: used, Year of construction: 1988, machine/vehicle number: 14/804766, For sale Used Abus single girder overhead travelling crane 5000mm x 2x 500 kg. We can possibly supply the cranes including: * Assembly and inspection. * power rails * radio control * master controls Jan Reiling B.V. also supplies new cranes completely customized at very competitive prices. * overhead cranes * suspension cranes * Slewing cranes * KBK rails cranes * boat elevators All our new and used cranes which we deliver assembled are delivered including warranty! In addition, we have our own stock of about 15,000 Demag parts. For more information see the website of Jan Reiling B.V. Csdpfx Alouviqhebehb Cranes, crane, rolburg, workshop crane, warehouse crane, hoist, krane, hallenkrane, brückenkrane, bruckenkrane, werkstattkrane, lagerkrane, hebezeuge, cranes, universel crane, hoist. Overhead crane, laufkrane, overhead crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Condition: used, Year of construction: 2011, Dry (epoxy casted ) three-phase distribution transformer - manufacturer ABB Zaragoza Spain, 800kVA, 35/0.4kV, IP00, uk=6%, Dyn1, TESAR ITALY 1000kVA 35/0,4kV Dyn1, Al winding, standard losses, documentation available, fully functional. Chedpfx Aljwiqczobob

Condition: new, functionality: fully functional, Ferwood Code: R21000980 - Manufacturer Code: OTT1001725591 - Condition: New - Functionality: Fully functional - If interested we offer a revision service, contact us. Cjdpfxovu Uw Us Albehb

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Chsdowkf Dvopfx Albjb Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Chsdpfswkrqpox Albjb Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, functionality: unexamined, power: 9 kW (12.24 HP), rotational speed (min.): 2,945 rpm, rotational speed (max.): 3,555 rpm, Used Siemens 1LA9163 3-phase electric motor Manufacturer: Siemens Model: 1LA9163 Voltage: 400-460V (50-60Hz) | 16.3A / 14.0A Power: 9.0 kW RPM: 2945 – 3555 Codpfxew Hynno Albjhb

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Csdjwvq Hgopfx Albjhb Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008244, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Csdpox Swgfefx Albshb

Condition: used, machine/vehicle number: 005062, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Cedpfx Aleybawdjbohb Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008160, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Csdpfxjxqm Iye Albshb Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Chodexx Tfzepfx Albob Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: used, functionality: fully functional, machine/vehicle number: 001637U, For sale Used Verlinde single girder overhead crane approx. 9,500 mm x 1,500 kg We can supply the cranes optionally including: * Length adjustment * Installation and inspection * Conductor rails * Radio remote control Jan Reiling B.V. also supplies brand new, fully customized cranes at highly competitive prices. * overhead cranes * suspension cranes * jib cranes * KBK installations * boat lifts All our new and used cranes supplied (within NL and BE) come with warranty! Additionally, we have our own stock of approximately 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Keywords: Chsdpoygh Ibjfx Albjb Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, single girder crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist, overhead crane, single girder overhead crane.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount Codpfoztl Scex Albjhb - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8/2017, working width: 180 mm, total height: 1,300 mm, overall weight: 800 kg, saw blade diameter: 200 mm, spindle diameter: 40 mm, input voltage: 380 V, type of input current: DC, Used Goma machine for manufacturing French herringbone flooring. An excellent tool for producing high-quality wooden flooring. It allows for the quick and precise production of flooring elements – herringbone patterns – with a choice of 3 angle types (45 degrees, 60 degrees, 90 degrees). The machine is in good working order and comes complete with 2 sets of saw blades and diamond cutters, as well as 3 types of tables with different angle settings. Year of manufacture: 2017. After installation, the machine is ready for operation. Chedjza U H Dspfx Albsb

Condition: used, Radial fan, fan, Dahlander electric motor, three-phase motor with 2 speeds, 1.6 kW + 6 kW, BLECHER type 132 S4 / 2 For exhaust, cooling, or ventilation Fan impeller diameter: Ø 400 mm Fan impeller width: 175 mm Shaft diameter, motor shaft: Ø 38 mm Csdpfjzinyhjx Albehb Motor design: Dahlander star / double star Motor speed: 1440 / 2870 rpm Number of poles: 8 / 4 Motor power: 1.6 / 6 kW Mains connection: 400 volts, 50 Hz - Dahlander three-phase motor with 2 speeds - Fan impeller made of metal - Fan cover made of metal, Ø 465 mm - Electric motor with standard foot flange, mounting holes Ø 11.5 / hole spacing 215 x 140 mm Space requirement L x W x H: 570 x 465 x 465 mm Weight: 57 kg Good condition 2 units available, price per unit.

Condition: used, Year of construction: 1999, functionality: fully functional, 5 MVA oil-filled transformer, manufacturer Schneider, year of construction 1999, 20 ± 5% / 10 kV, connection group Yy0; was in operation until 07/2026. Csdpfxezr Ur Ao Albehb Equipped with an expansion tank, Buchholz relay, air dehumidifier, and dial thermometer.

Condition: excellent (used), functionality: fully functional, Pamasol Single Stage Filler Type: 2079 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland. Chedoznw Aiopfx Albob