Used Steigerbuis Scaffolding Tubes for sale (2,010)

Condition: good (used), Year of construction: 2006, Berg & Schmid Xtech 410 CNC sawing machine Year of manufacture: 2006 Control: - CNC control, freely programmable Hjdpfx Aijz Ii T Dstjnu Cutting range: - Round: 410 mm - Flat: 410 mm - Dimensions: approx. 3,500 × 2,000 × 2,200 mm - Working height: 730 mm Cutting speed: - 12–110 m/min Equipment: - Material feed via precision ball screw and linear guide - Hydraulic saw blade tensioning - Automatic double-sided saw blade free-travel device - Hydraulically driven chip conveyor - Clamping pressure adjustment for thin-walled tubes and profiles - Frequency-controlled saw drive, stepless - Infeed automation for the first cut - Blade tracking system Saw drive: - 5.5 kW

Condition: used, This listing is for a Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) Hnsdpfjxhdx Djx Aitju 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: used, This listing is for a Watson Marlow 530S Peristaltic Pumps The units are in full working condition and ready for immediate release. Overview & Function The Watson‑Marlow 530S is part of their 500 series cased peristaltic/process pumps. Industrial Provider It’s used for precise fluid metering, dosing, or transfer in laboratory, industrial, pharmaceutical, food & beverage, water treatment, and other process environments. As a peristaltic pump, it works by compressing a flexible tube (or tubing element) with rollers or shoes, pushing fluid forward while the fluid never contacts moving mechanical parts (only the tubing). This gives isolation and reduces contamination risk Because fluid only contacts tubing, the risk of contamination or cross‑contamination is low, and maintenance is relatively straightforward (replace tubing / elements). Very good turndown ratio (i.e. ability to dial down flow finely) thanks to the wide speed control range. Hnsdpoxv Ak Iefx Aitou The user interface is designed for operational simplicity and clarity. Offers flexibility in control: it supports analog and digital remote control, SCADA integration, and bus communication. Ability to use different pumpheads and tubing materials to suit pressure, chemical compatibility, and flow requirement

Condition: used, This listing is for Watson Marlow 323 Peristaltic Laboratory Pumps Each unit is in full working condition and is ready for immediate use Hnsdpsygmdhsfx Aiteu The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wear

Condition: used, all stainless steel water circulation net belt length 10.000 mm net belt width 1.400 mm adjustable speed Hnodpfx Aoz Nxgdeitou lifting unit with electrical hoists dimensions (l x w x h): ± 11.000 x 2.100 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 1.200 mm distance between flights: 200 mm height of flights: 85 mm

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm Hnodpfxez Nz T He Aitju • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035492, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 04/2027, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 80 %, color: silver, Attention: the pictures are archive images. The vehicle may be in use! #Container semi-trailer chassis - Fine-grain steel welded construction, gooseneck plate with replaceable 2" kingpin and 2 kingpin positions - Container positions: Hedpfxez Nglho Aitenu - Rear extension retracted: - 1 x 20 ft or 1 x 30 ft flush with rear - Central telescope stage 1, rear extension extended stage 1: - 2 x 20 ft or 1 x 40 ft with gooseneck tunnel - Central telescope as nested central tube frame with pin locking - Front cross member with folding locks (not available with front extension) - Without rear height adjustment and without folding centre supports; transport of containers without tunnel not possible - Rear extension mounted on rollers, with hand crank - 24 t 2-speed landing gear, one-side operation, with semi-round feet and straight mounting plate, with thrust compensation - 2 wheel chocks with holder - Side underrun protection, aluminium - Underrun protection, galvanised steel - Extendable underrun protection for 45 ft containers - Half-shell mudguards - with anti-spray mud flaps according to EC - Rear impact protection #Axles + suspension - BPW disc brake axles with 430 mm disc diameter - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Staggered axle spacing 1410/1310 mm (combined transport) up to 44 t gross combination weight - Air suspension - 1st axle automatic lift axle, incl. forced lowering and traction help, activation "3x braking" (traction help functions up to 30% axle load excess and up to max. 25 km/h) #Braking system - 2-line compressed air braking system - Colour-coded line routing for easy servicing - Spring brake parking brake - Tele Control - Axle load relief for easy telescoping - 2 mismatch-proof coupling heads at front, without connecting line - EBS, electronic braking system with EBS socket at front, without connecting cable - Test connection for brake cylinder pressure on EBS module routed to the outside - Attention: the trailer may only be towed by towing vehicles that ensure ABS effectiveness! - with raise & lower valve + auto-reset function - Vehicle driving stability system - Axle load detection via EBS CAN bus signal for display in the driver's cab; truck must be prepared accordingly, nothing installed on the tractor unit (not a calibrated scale) #Wheels and tyres - 385/55 R22.5", make at manufacturer's choice - Steel rims, factory silver #Electrics - 24 V, 4 x 3-chamber lamps + 1 round reversing light + 1 round rear fog light, full LED with resistor, yellow LED side lighting, LED number plate lighting (note: with certain towing vehicles false diagnostics may occur although the function is given) - 2 white LED front position lights - 2 white/red LED outline marker lights at rear - 1 x 15-pin socket at front, without connecting cable - 2 additional LED work lights at rear, switched via reversing light Attention: archive images!

Condition: excellent (used), BLB GmbH, supplier of new and used warehouse technology. You can obtain shelving systems, industrial trucks, accessories and other warehouse inventory from us. In this ad you buy as follows: Used pallet racking / Manufacturer Meta Plug-in system with pre-assembled frame, very quick assembly Positioning : 10 x rack bays with 4 x pairs of beams per bay Bay width 2700mm / beams 120 x 50mm / color black Quantity scaffolding Hnjdsp I E Taspfx Aiteu 11 pieces Frame height approx. 7,500mm / depth 1100mm / painted black / pre-assembled 80 pcs. cross beams 120 x 50mm, painted black, incl. safety pins The display is available 2 x ! MORE - SMALL QUANTITIES POSSIBLE ! PLEASE ASK FOR YOUR DESIRED QUANTITIES Further accessories available for an extra charge ground anchor Impact protection Crash barrier Wire mesh Net price: 2950€. ex warehouse Weißenhorn, invoice with VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please ask for your transport costs.sale of used goods without guarantee & warranty. Errors / prior sale of used goods expressly reserved.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz Hnedpfjzlbpbjx Aitou - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, Beavertail rear, Ramp Equipment: - Spare wheel - Shovel holder - Loading ramp Net: €5,621.85 / Gross: €6,690.00 Article number: VB4235401810.02 Technical data: • Brand: Variant • Model: 3518 B4 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 30 cm • External dimensions (L x W x H): 600 x 234 x 168 cm • Loading height of the floor: 30 cm • Permissible total weight: 3,500 kg • Tare weight: 815 kg Hnsdpfsyyw N Asx Aitju • Payload: 2,685 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced aluminum diamond-plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed plywood floor, 18 mm, non-slip and waterproof • Extremely stable, welded grid tube frame • Frame completely hot-dip galvanized • Steel loading ramp, upright on shaft, 130 cm • Stable eccentric locks • Support blocks on loading ramp • Very low chassis for a low loading angle • Beavertail rear / low loading for work platforms and excavators • Excavator bucket holder at the front • Spare wheel, mounted under the excavator bucket holder • 10x lashing eyes mounted in the outer frame (1000dAN/kg) • 8x lashing points on the inside • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT inertia brake and parking brake • Lockable tow hitch • Spare wheel, mounted under the excavator bucket holder • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights at the rear with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Hodpfxoz Rknpe Aitsnu

Condition: used, machine/vehicle number: NP8FA99W3N0000318, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) Hnjdpfxozyf Uqj Aitsu - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: refurbished (used), Young, fully refurbished refrigeration unit HAS 700 The HAS 700 is specifically designed for industrial process applications. The refrigeration unit features a shell-and-tube evaporator and a 500-liter tank, EC fans, process temperatures down to -12°C, and is operational up to an ambient temperature of -10°C. It also includes a compressor sound enclosure and uses R454B refrigerant. Refrigeration capacity at 12/7°C and an ambient temperature of 35°C: 625 kW. Hnedpez Rpnbjfx Aitsu

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. Hodpsywgaxefx Aitsnu The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: refurbished (used), Year of construction: 2024, cooling capacity: 68 kW (92.45 HP), type of cooling: air, overall weight: 870 kg, temperature: 7 °C, Fully refurbished FAS 096 refrigeration unit for industrial applications. The unit is designed for outdoor installation. The FAS 096 is equipped as follows: Hnedpfjtw U Dqex Aiteu closed, internal tank, a 3-bar pump, and scroll compressors from the manufacturer Bitzer. The refrigerant used is R454B. The evaporator is a tube bundle installed inside the internal tank. Refrigeration capacity at 12/7°C and an ambient temperature of 35°C: 68 kW.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,973 kg, empty load weight: 2,027 kg, loading space volume: 16.6 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,200 mm, Price upon request. The price applies ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 1 unit in stock, RAL 7043 4 units available in the short term, other RAL colors on request Other designs and sizes available from stock in Paderborn. You can view our stock levels on our website. Roll-off container according to DIN Technical description: Hnjdoz E Ncyepfx Aitsu * Internal dimensions: 6000 x 2300 x 1200 mm * Usable volume: 16.6 cbm * Unladen weight: 2027 kg * Floor 5 mm S 235 * Side walls 3 mm S 235 * Without internal supports * All sheets and profiles continuously welded * Double-wing door with safety latch * Container tested and approved according to DGUV Rule 114-010 * Floor-side wall connection 45° * Hook diameter 50 mm, S 355 * Hook height 1570 mm * Top frame square tube 100x100x5 mm * Mesh hook * All moving parts can be greased * Steel drain rollers 159 x 6.3 length 300 mm * Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustration purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,180 kg, empty load weight: 1,820 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price on request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase possible. 5 units in stock, RAL 7043 1 unit available shortly, other RAL colors available on request. Other designs and sizes available ex warehouse Paderborn. You can view our stock levels on our website. Technical description: • Internal dimensions: 5500 x 2300 x 750 mm (internal length) • Usable volume: 9.5 cbm • Tare weight: 1820 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • End wall angled upwards • All sheets and profiles continuously welded Hnodpfjz E Na Esx Aitju • Double-leaf door with safety lock • Standard ladder according to UVV, screwed on, galvanized • Container tested and approved according to DGUV Rule 114-010 • Floor-side wall connection 90° • Hook diameter 50 mm, S355 • Hook height 1570 mm • Top frame, round tube Ø 89 mm • Mesh hooks • All moving parts lubricatable • Steel drain rollers 159 × 6.3, length 300 mm • Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 630 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 200 rpm, rotational speed (min.): 20 rpm, total height: 2,700 mm, total length: 2,650 mm, total width: 4,385 mm, overall weight: 6,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the High-Performance Bandsaw HBM540A SpeedCutting Technology (optional) By combining SC-Performance saw band guides, a high-performance coolant system, dynamically controlled feed rate, and a specially optimized auto-feed control, you can achieve maximum performance and tool life from the saw band used. Prepared for Automation A powerful sawing machine concept places high demands on material handling. The high-performance bandsaw automatons of the HBM series are often configured as automated sawing centers. Therefore, the machines are already equipped in the basic version to connect extensive peripherals. Servo Feed System The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter idle times and more precise feed rates. Your advantage: higher cutting performance and longer band life! Sensitive Behringer Cutting Pressure Control increases the cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the industrial saw to the changing material cross-sections. Due to its arrangement directly at the back of the saw band, the system regulates quickly and precisely. Hjdpfx Asz Rzq Isitenu Optimal Chip Removal The highest cutting performance of the industrial saw places high demands on chip removal. The wide, funnel-shaped machine stand allows for free chip flow into the underlying chip conveyor with an integrated coolant tank. The discharge height of 800 mm or optionally 1,200 mm allows the use of large chip containers. Economical Use of Carbide Saw Bands due to the robust design of the industrial saw, the use of the latest servo technology, and well-planned chip removal. Precise Guide System in Portal Design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and maximum service life of the bandsaw. Band-Guiding Parts Made of Gray Cast Iron are made by Behringer and ensure vibration damping directly at the cutting interface, thereby increasing the tool life. Automatic Guide Arm Adjustment This means that the metal bandsaw offers optimal sawing results without adjustment effort - even with frequently changing material widths.

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- Hnedpfx Aoz Rzh Hjitou cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: excellent (used), TETRA PAK A3 FLEX 1000 B ASEPTIC FILLING MACHINE – 500 ML FORMAT Industrial aseptic filling machine, TETRA PAK A3 FLEX 1000 B, configured for the automatic packaging of liquid food products in 500 ml multilayer cardboard Tetra Brik Aseptic containers. The machine uses aseptic forming, filling, and sealing technology, integrating the sterilization of the packaging material, the formation of the brick, the dispensing of the product, and its hermetic sealing into a single machine. Tetra Pak A3 Flex technology is designed for the industrial packaging of previously sterilized products, allowing for the production of long-life beverages without the need for refrigeration before opening, provided that the required processing and sterility conditions are met. MAIN FEATURES - Manufacturer: TETRA PAK - Model: A3 FLEX - Version: 1000 B - Filling format: 500 ml - Type: Automatic aseptic brick filling machine - Packaging: Tetra Brik Aseptic - Automatic forming, filling, and sealing system - Continuous feed of packaging material via reel - Sterilization of packaging material - Formation of multilayer cardboard packaging - Filling of previously sterilized product - Longitudinal and transverse sealing system - Automatic cutting and forming of packaging - Control of aseptic conditions during the process - Automatic transport and discharge of packaging - Tetra Pak electronic control panel - Operating parameter monitoring system - Upper platform for access and maintenance - Industrial construction with stainless steel components - Integrable into complete aseptic packaging lines OPERATING PROCESS The multilayer packaging material is fed into the TETRA PAK A3 FLEX from a reel and passes through the sterilization system before being formed. Subsequently, the material is transformed into a continuous tube through longitudinal sealing. The product, previously treated using a compatible UHT system, is introduced inside under aseptic conditions. The machine performs the transverse sealing, cutting, and forming of the individual packages, producing hermetically sealed bricks ready for the next production stages. The finished packages can be transferred to inspection, coding, capping, grouping, case packing, and palletizing systems. APPLICATIONS Particularly suitable for dairy industries, juice, nectar, plant-based beverage, and other long-life liquid product manufacturers. Depending on the installed configuration, it can be used for: - UHT milk - Flavored milk - Dairy smoothies - Fruit juices - Nectars - Plant-based beverages (soy, oat, or rice) - Nutritional beverages - Other liquid beverages compatible with aseptic packaging The TETRA PAK A3 FLEX 1000 B constitutes an industrial solution for automating the aseptic packaging of beverages, combining packaging formation, filling, and sealing in a single machine. The exact formats, production capacity, and compatibility with different products will depend on the installed configuration and tooling. Machine available for inspection. Hnsdpfxoz Rzids Aitju Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2016, Conveyor system for bulk solids Bulk solids conveying system using a flexible screw. The system comprises a FLEXICON stainless steel hopper with a pyramidal bottom, support legs and capacitive level sensor. UTFS-S045-010-X tubular conveyor, approximately 2 m long, fitted with a 114 mm diameter UHMW polyethylene outer tube and flat profile flexible internal screw. Discharge head with DRP-02214T-05-X geared motor. The drive incorporates a 2.2 kW three phase motor operating at 1,425 rpm and 50 Hz, with IP55 protection. The system is ATEX II 3D T125 certified, suitable for operation in Zone 22 environments containing combustible dust. Designed for conveying pellets, plastic granules, powders and other solid products with minimal segregation of blended materials. Hnsdpfx Aijz R Auuotju

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Hjdpfx Ajwz Rifeitsnu Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: excellent (used), functionality: fully functional, lifting height: 1,350 mm, load capacity: 1,000 kg, total length: 2,500 mm, total width: 600 mm, working height: 1,350 mm, roll diameter: 50 mm, operating pressure: 200 bar, power: 1.1 kW (1.50 HP), lifting time: 15 s, construction width: 600 mm, roll spacing: 150 mm, roll width: 550 mm, segment length: 2,500 mm, Scissor lift table, WTT Fördertechnik, Series E 10.10.5.1.0.RB, Roller conveyor length: 2500 mm Platform width: 600 mm (rollers 550 mm) Load capacity: max. 1000 kg Useful lift: max. 1350 mm Total: 7 units Sold individually Equipped with non-driven support rollers made of precision steel tube, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Installation length of the support rollers (width): 550 mm Roller conveyor height in the transfer area: 280 mm Lifting time: approx. 15 sec. Hnsdsv Acnkspfx Aiteu Foot protection contact strips Hand-held switch on a 3 m long cable Automatic stacking protection - by slightly lifting the platform, the support rollers are automatically braked. Foldable inspection supports Built-in hydraulic unit: 1.1 kW, 200 bar Operating voltage: 400 V, 50 Hz (Subject to changes and errors in the technical data, as well as prior sale)

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: Hnjdpowwmkdofx Aitsu 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,020 kg, maximum load weight: 28,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 1,060 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Year of construction: 2026, Equipment: VDI 2700 certified, Curtainsider Mega Tailor-made transport solution Configure your Fliegl vehicle to suit your requirements. The vehicle shown is an example. Production and equipment are customised individually to customer specifications. #Chassis for haulage semi-trailers - With "Preload" slight pre-tension in the gooseneck area, fifth-wheel plate with replaceable 2" kingpin - Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps - Note: free landing gear corner clearance / free rearward swing radius approx. 1,930 mm - Pull-out ladder at rear - Optionally with patented "Fliegl D-Lock" door holder - 2 wheel chocks with holder - Aluminium side underrun protection - Galvanised steel rear underrun protection - Quarter mudguards in front of 1st axle and behind each axle - Rear corner impact protection - Optionally with pallet stop on both sides, approx. 20 mm high, bolted version #Axles + suspension - Disc brake axles - Laser-aligned axles/running gear: reduced tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system Hnedpfxez Snwws Aitou - Colour-coded lines for easy servicing - Spring brake parking brake - 2 mismatch-proof coupling heads at front - 24 V EBS, electronic braking system with EBS socket at front - With raise/lower valve + auto-reset function - Vehicle stability system #Wheels and tyres - Tyre size 435/50 R19.5" - Optionally aluminium rims #Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - 2 white front position lights - 2 white/red outline marker lights at rear - 2 x 7-pin and 1 x 15-pin mismatch-proof sockets at front - Optionally with additional work lights at rear, on landing legs or in the interior #Floor - Film-faced plywood approx. 30 mm thick on longitudinal bearers for high point load capacity, forklift axle load up to max. 7,100 kg #Front wall / front corner posts - 2,580 mm high, heavy-duty steel corner posts, release device for side curtain at front wall - "Crash-Blocker", bottom inside at approx. 140 mm height with steel impact protection #Rear wall / rear corner posts - Steel rear corner posts up to lower edge of roof, curtain attachment with round tube and curtain tensioning ratchet - Rear portal doors, double-wing, each with 2 internal espagnolette locks - Patented Fliegl "I-Lock" door lock – winner of the iF Design Award #Curtain - With welded-in vertical straps - 5 rows of aluminium or wooden insertion slats #Roof - Sliding roof, rear end bow folds up, roof cover slides from rear to front, curtain colour: white - Optimised rain gutter at rear, at top of rear bow, above the doors - Mechanical or hydraulic lifting roof #Optional - Fliegl manufacturer's certificate for body strength to EN 12642 XL (for payload up to max. 27,000 kg) - Fliegl manufacturer's certificate for body strength to DL 9.5, pallet stop on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm (pallet stop not in combination with dropsides) (for payload up to max. 27,000 kg) - Fliegl manufacturer's certificate for load securing to VDI 2700 sheet 12 ff., pallet stop on both sides, approx. 20 mm high - Rear marking plates to ECE-70 - Also available with various load securing options, as 2-axle version and as Xtra-Long Attention: archive images