Used Shred-Tech St-75Es for sale (19,004)

Year of construction: 2022, condition: new, 1 x Niro-Tech MB2 boot-washer, brand new: Dimensions – 1260mm wide x 2000mm long x 1080mm high. Electricity – 400v, 50hz. colours. Manufactured in AISI 304 stainless. Lrodohq Rd Ujpfx Ab Aou

Condition: new, shaft diameter: 30 mm, Equipment: CE marking, documentation/manual, emergency stop, - Shaft diameter 30 mm - Rotates to the right and left - Emergency stop - Documentation Lrsdpfxshvv Hqo Ab Asu - 230V

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Ledpfxsfu Nbbo Ab Aeru Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control Ljdsfg E Hmepfx Ab Aeru A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m Ljdpfx Aofg E Hpjb Asru The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm Ljdpjfgyifofx Ab Aoru total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min Lredpfofgyigsx Ab Aeu table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Jung Heinrich Type: T Technical Data for Installation: Number of Racking Rows: 01 pc Length per Row: 25,300 mm Number of Bays per Row: 09 pcs Number of Levels incl. Floor Level: 02 pcs Technical Data for Capacity: Pallet Positions per Bay: 09 pcs Pallet Positions per Row: 81 pcs Total Pallet Positions: 81 pcs Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Maximum Pallet Weight: 900 kg Scope of Delivery Includes: 10x Pallet Racking Uprights, used Material color: blue Profile dimensions: 100 x 65 x 2.0 mm Incl. horizontal and diagonal braces, foot plates The uprights are pre-assembled (welded truss construction) 2,200 mm high 1,100 mm deep 36x Pallet Rack Beams, used Material finish: Sendzimir galvanized Beam type: HN 120|20 Box profile: 120 x 50 mm Connector: 3-hook Clear span: 2,700 mm Max. load per beam pair: 2,700 kg, with evenly distributed load 72x Locking Pins, used Material finish: Sendzimir galvanized To secure the beams against unintentional lift-out Ljdpfotq Hfujx Ab Aoru 40x Wedge Anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 20x Shim Plates, used Finish: fully galvanized For leveling racking uprights placed on uneven floors 01x Load Sign With specifications for bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. Any further transport or shipping of this item will incur additional costs, which can be requested from us depending on delivery location and scope.

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled Height: 2,280 mm Depth: 300 mm 05x wooden shelf, used Chipboard width: approx. 985 mm Chipboard depth: 217 mm Material thickness: 22 mm 10x Shelf traverse, second choice (new) Type: KTRZ 31036 Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm Clear width: approx. 994 mm Hole pattern: approx. 53 mm Agraffe: 3 HK (hooks) Weight per unit: 1,700 kg Max. load per pair of crossbars 300 kg with evenly distributed load 10x unit beams, used Material color: sendzimir galvanized Dimensions: approx. 40 x 35 mm (WxH) Material thickness: approx. 1.50 mm Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery. Lredpfx Ajttg Erob Asu

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm Ledpfxjuhhzhs Ab Aeru throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Year of construction: 2003, condition: used, HORIZON Stacking Receiving Tray, ST-20 The Horizon ST-20 is a smart and efficient tool for print shops. It helps organize and stack printed materials neatly, making work easier and faster. It takes printed sheets and stacks them in an organized way. It can stack sheets flat or slightly offset to the side, which helps manage different types of print jobs. Key Features - Works well with others: The ST-20 can be used with many Horizon machines, including MC-80a, VAC-100a, VAC-60Ha, VAC-1000, and VAC-600. - Flexible stacking: It can stack sheets flat or offset, adapting to different print jobs. - Holds a lot: It can stack papers up to 320 mm high, which means fewer stops to empty it. - Neat and tidy: The ST-20 stacks papers precisely, keeping everything in order. Technical Details - Biggest sheet size: 450 x 310 mm - Smallest sheet size: 185 x 128 mm - Stack height: Up to 320 mm - Dimensions: 652 x 550 mm - Weight: 62 kg 3 MONTHS WARRANTY Lrjdpfx Aju Srnijb Asu We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Lredpjzqt Umjfx Ab Aou Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, mileage: 131,050 km, power: 120 kW (163.15 HP), first registration: 12/2014, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 17, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Internal Vehicle No.: 5827_X ----Why Autonext? Over 400 passenger cars & commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available on autonext – Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to view the vehicle completely, both inside and out: Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes-Benz Like-new all-weather tires in front Facelift Number of seats: 17 Roof air conditioning Auxiliary heater Microphone Electric step Tinted windows Roof window Digital tachograph ---- Special equipment: * Auxiliary heater (air), electric * Generator 250 A * Audio system Audio 10 (radio with CD player) * Battery disconnect switch, 1-pole * Door entry lights Lredpfx Aszkpbpjb Aju * Digital tachograph, downloadable * Window for rear doors * Window in the cargo/passenger compartment: - fixed, rear left * Window in the cargo/passenger compartment: - fixed, rear right * Window in the cargo/passenger compartment: - fixed, center left * Window in the cargo/passenger compartment: - fixed, center right * Window in the cargo/passenger compartment: - fixed, front left * Window in the cargo/passenger compartment: - fixed, front right * Spare wheel in driving condition * Spare wheel holder under the end of the frame including jack * Interior rearview mirror * Mud flaps front * Seat equipment: Comfort headrest, driver's seat * Seats in the cab: Driver's seat, comfort * Stabilizer, rear * Stabilizer, front, reinforced * Shock absorbers, reinforced * Fuel tank gauge for auxiliary heater * Interior trim in the cargo/passenger compartment: Standard * Fleece battery 95 Ah * Preparation for auxiliary heat exchanger * Front axle, reinforced * Thermal insulation, driver's cab * Thermal insulation, cargo/passenger compartment * Heat-insulating glass (windshield with band filter at the top) * Auxiliary heater (hot water) * Two-way speakers front and rear * Intermediate partition, sliding cargo door Standard equipment: 3rd brake light, Adaptive brake light, Airbag driver side, Anti-lock braking system (ABS), Drive type: Rear-wheel drive, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assist, Braking system with ABS+ASR, Headlining in the cab, Electronic stability program (ESP), Power windows, electric, 2-way, Transmission 6-speed - TSG (Eco Gear), Glove box lockable, Rear door (opening angle 180 degrees), Body/structure: Box van, high roof, standard, Child lock, Fuel tank: Main tank 75 liters, Cargo area partition, continuous, Load securing / lashing eyes, Headlight range adjustment, Model upgrade, Engine 2.1 liters - 120 kW CDI CAT, Particle filter, Wheelbase 4325 mm, Smoker's package, Low emission according to emission standard Euro 6, Sliding door, cargo/passenger compartment, right, Power steering, Seat belt system with warning system (driver's side), Seat cover / upholstery: Fabric Lima, Seats in the cab: Passenger seat with armrest, Seats in the cab: Passenger seat adjustable, Seats in the cab: Driver's seat with armrest, Service interval indicator Assyst, Immobilizer, Central locking with remote control

Condition: good (used), Year of construction: 2005, operating hours: 76,988 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, plate length: 600 mm, plate height: 670 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, Equipment: documentation/manual, ENGEL Victory 200/80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control System: CC100 Year of Manufacture: 2005 Operating Hours: 76988 h Technical Data - Clamping Side Clamping Force: 800 kN Platen Size h x v: 670 x 600 mm Minimum Mold Height: 250 mm Maximum Mold Height: 700 mm Opening Stroke: 450 mm Ejector Stroke: 100 mm Ejector Force: 40 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 675 kg Technical Data - Injection Side Screw Diameter: 30 mm Injection Volume: 99 ccm Injection Pressure: 1450 bar Screw Length: 20 l/d Screw Stroke: 140 mm Plasticizing Rate: 17 g/s PS Free Injection Flow Rate: 150 g/s PS Number of Heating Zones: 4 Nozzle Length: 200 mm Ljdpfjz Ayttjx Ab Asru Dimensions & Weight Machine Dimensions L x W x H: 4.05m x 1.93m x 2.2m Total Weight: 5200 kg Equipment Screen text: German CEE socket 16A Core pull hydraulically 1x Machine including conveyor belt Machine including handling system Machine with water manifold Machine without material hopper Leveling elements Schuko socket 10A Technical Data - Handling System Machine Type: Linear handling system Manufacturer: Engel Control System: ER-HLI 31 VC Year of Manufacture: 2005 Handling System Weight: 2 kg Screen Text: German Total Weight: 250 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 22 mm, displacement volume: 38 cm³, total length: 4,400 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 6,700 kg, Equipment: documentation/manual, ENGEL VICTORY 80-90 tech Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of manufacture: 2009 Operating hours: 70,171 h Ledpfx Asz A A T Tjb Asru Technical Data – Clamping Unit Clamping force: 900 kN Platen size (HxV): 740 x 680 mm Minimum mould height: 300 mm Max platen daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 38 ccm Injection pressure: 2,060 bar Screw L/D ratio: 19 l/d Screw stroke: 100 mm Screw speed: 360 min⁻¹ Free flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions (LxWxH): 4.4 m x 1.5 m x 2 m Total weight: 6,700 kg Equipment Display language: German CEE socket 16A 1x hydraulic core pull 2x air valves Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A 4x mould heating circuits

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic operation Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-barless, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic operation Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the fixed platen Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic coolant regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Ledsz Ipr Tepfx Ab Aeru Price: On request

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Lrodpjz Ipu Usfx Ab Aou Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Lrodpfx Aboz Ipvfe Asu Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2011, condition: used, MSK Covertech Tension Tech Stretch Hood Wrapping Machine. S/No. 371-3 (2011) Lodez I Suwspfx Ab Aoru Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, cooking length ± 13.000 mm belt width 600 mm all stainless steel Lsdpfx Abjz Imw Hj Aeru with electrical hoist steam heated (steam generator not included): 780 kg/h (6bar) temperature distribution in 2 zones dimensions (l x w x h) : ± 14.400 x 2.000 x 2.700 mm adjustable speed

Condition: good (used), Technical data for the pallet racking upright: Racking system: Jungheinrich Type: MPB Included in the scope of delivery: 01x Pallet racking upright, used Frame profile material color: hot-dip galvanized Bracing material color: Sendzimir galvanized Upright type: STD´B´28 Profile dimensions: 120 x 65.5 x 2.5 mm Includes cross and diagonal braces, Ljdpsz A S H Njfx Ab Aoru upright protectors, and base plates The uprights are pre-assembled (bolted bracing) Height: 6,750 mm Depth: 1,100 mm Note: Steel grade S420MC is superior compared to S355MC Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2006, turning diameter 540 mm turning length 1020 mm Lodpfxjz Ezrmo Ab Ajru control FANUC 18 i-TB bar diameter 65 mm travel -x axis 555 / 185 mm travel -y axis 160 mm travel -z axis 1095 mm travel -z axis (sub spindle) 1065 mm spindle speed: 5000 / 5000 1/min spindle bore 76 / 76 mm C-Axis 360 x 0,001°/360 x 0,001° turret head BMT 65P / 12 Pos. milling spindle turning speeds 10000 U/min Driven Tools 4.000 U/min b-axis 240 ° rapid traverse X-axis 24 m/min rapid traverse Z-axis 24 m/min drive capacity - spindle motor 22 / 22 kW voltage 400 V toolpiece magazine: chain magazine 40 Pos. tool taper HSK-A 63 milling drive 15 kW driven Tools 5,5 kW total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,30 x 2,30 x 2,90 m

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, Horizontal baling press HSM HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Operating hours: 432 Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-strand horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. This offer is non-binding, subject to prior sale and can be revoked at any time. Ledpjz H I D Eefx Ab Aoru Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Technical data for the pallet racking upright: Racking system: Stow Type: Pal Rack NS Included in the scope of supply: 01x Pallet racking upright, used Frame material color: RAL 5015 blue Brace material color: sendzimir galvanized Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 3,100 mm Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Lodpfx Abjz Datgs Asru

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm Lrsdpfsz Nx Rcox Ab Aou • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes