Used Semi Auto Bag Loader for sale (19,251)

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L Gijdeyxb Tvopfx Af Sow * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m * Gross weight: 37,000 kg (technically possible: 39,000 kg) * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres * Ramps * BPW axles Roadworthiness certificate valid until 01/2027

Condition: used, maximum load weight: 37,885 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, Equipment: ABS, Excerpt of equipment: - Extendable loading platform with a rear slope of approximately 1,000 mm x 8°. - Hardwood flooring, approximately 48 mm thick, with a non-slip steel plate covering over the axles. - JOST kingpin (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). - BPW axles and suspension, 2 fixed axles, 1 self-steering axle, technical axle load: 12,000 kg each. - Air suspension with lifting and lowering valve. - Braking system in accordance with EU regulations with EBS-E (2S2M). - 2-inch kingpin. - One galvanized steel front wall, approximately 400 mm high. - Load measuring device for determining axle loads, including a load diagram. - Aluminum side panels and rear wall on the gooseneck, plug-in type, approximately 2,440 x 400 mm (L x H). - One galvanized toolbox, integrated into the sloped gooseneck (± 47 kg). - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or 40' container. (± 30 kg). - 6 pairs of spar pockets for plug-in spars, approximately 100 x 50 mm, in the outer frame of the loading platform. (± 18 kg). - Extensions, galvanized, extendable by approximately 230 mm on each side (± 230 kg). - Lift axle on the front axle. - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle. - 2 LED reversing lights mounted on the rear panel. - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (± 16 kg). - Four warning panels, extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light. (± 25 kg). Godszkx Ilspfx Af Seiw - A mounting bracket for a rotating beacon on the warning panels. - One rotating beacon supplied separately. - HRM metallization (High Resistance Metallization). - Top coat in a single color, RAL 3002 carmine red.

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, maximum load weight: 35,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck in SNT design to optimize the length of the loading area, approximately 3,700 mm long. The rear of the gooseneck has a bevel of approximately 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for SZM (special heavy-duty vehicles): 4 x 2 and 6 x 2 axle configurations. Loading Platform: Telescoping loading platform, approximately 9,600 mm long, with a rear bevel of approximately 900 mm x 6°. The loading platform can be hydraulically raised and lowered after the gooseneck, with a length of approximately 3,000 mm. Load capacity up to approximately 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS. A pair of two-part AXS steel ramps with a length of approximately 4,920 mm and a width of approximately 900 mm. Open grid flooring. Hydraulically folding ramp ends. The ramps can be individually moved outwards approximately 235 mm and inwards approximately 365 mm hydraulically. Maximum load and approach angle according to technical data sheet: C470319. Maximum angle of inclination with the loading platform lowered: approximately 9°. Axles and Suspension: BPW axles and suspension. The 1st and 2nd axles are fixed, and the 3rd axle is steered. Technical axle load: 12,000 kg. Electro-magnetic reverse lock, activated via reverse gear and manually. Air suspension with lifting and lowering valve. Axle tool. Braking System: Braking system from WABCO EBS-E, in accordance with EU regulations. No connection cable to the tractor unit. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer of our choice. Load index 143/141J (144/144F). Gisdpfx Afjzkx Hbo Sjw Paint Finish: 6-coat finish: Complete steel construction blasted with shot after welding. 1 coat of zinc-based primer, 1 coat of adhesive primer. Topcoat with 2 coats of 2-component paint (acrylic), in a single color: RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra charge. Included Accessories: - ASPÖCK-UNIBOX on the connection strip at the front, with 24N, 24S & 15-pin sockets. - 24N connection according to ISO-1185 - 24S connection according to ISO-3731 - 15-pin connection according to ISO-12098 - 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - Parking position on the gooseneck for warning signs when not in use. - Outboard supports on the gooseneck with mounting holes for screw-on lashing rings. - The first hole is approximately 200 mm from the front, then approximately every 400 mm. - One mounting hole in the rear upper area of the outboard supports of the gooseneck for a screw-on lashing ring. - 1 pair of screw-in lashing rings included (LC 10,000 daN). - 3 pairs of recessed lashing rings inside the outboard support of the gooseneck (LC 5,000 daN). - 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - Grid flooring with approximately 5 mm sheet metal reinforcement on the gooseneck and rear bevel. - 2-inch Kingpin - Guide plate on the gooseneck for the fifth-wheel plate, approximately 500 mm wide. - Mechanical fifth-wheel supports with 2-speed gearbox and crank. - JOST Module B - static test load = 50,000 kg - Continuous grid flooring with 5 mm sheet metal as additional reinforcement, designed for point load: - Locking of the loading platform with conically welded locking profile

Condition: used, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck: - with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approximately 30 mm thick Loading platform: - in extendable design with rear taper of approximately 1,000 mm x 8° - 5 pairs of lashing rings that fold outwards (LC 5,000 daN) - 3 pairs of lashing rings that fold outwards (LC 10,000 daN) - 1 pair of lashing rings lying flat at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) - Hardwood flooring, approximately 48 mm thick - Diamond plate flooring over the axles Kingpin supports: - JOST kingpin supports (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tires: - 235/75 R 17.5 3PMSF Axles: - BPW axles, two fixed axles, two steered axles, air-sprung - with drum brakes with lifting/lowering function - The steered axles with electro-magnetic reverse lock can be activated via reverse gear or manually Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork: - High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red Accessories: - One spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high - Yellow-red air couplings on the galvanized connection strip at the front - 4 wheel chocks with holder on the front wall - Mount at the rear of the gooseneck for aluminum loading ramps - Galvanized folding supports under the taper of the loading platform - One holder for a rotating beacon at the rear of the trailer - Yellow reflector tape in accordance with EU regulations on the side, on the extension, and at the rear of the trailer - One holder for warning signs on the left and right sides of the gooseneck and rear panel, including socket - Load scale to determine axle loads, including load diagram Gsdpfx Afszkx Hus Soiw Includes special accessories: - Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' container - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle - 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm in the outer frame of the loading platform - Extensions, galvanized, extendable by approximately 230 mm on each side - Lift axle on the front axle with control via TEBS E - 2 LED reversing lights mounted on the rear panel - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - An acoustic warning signal when reversing - HRM metallization (High Resistance Metallization)

Condition: used, overall weight: 49,500 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 02/2027, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2018, Equipment: ABS, FAYMOVILLE/MAX TRAILER SEMI Extendable to 17250 Sliding table Hydraulic system operated via electrics Giedpfxszknrte Af Sew SAF axles, 3 x 10,500 kg Air suspension 1 axle liftable Last axle steered Widened to 3,000 mm Drive-over capability at the front with aluminum ramps Storage boxes Tires with 50-60% tread Container locking system Aluminum sideboards at the front German registration 8 chain tensioners with TÜV approval Widening warning signs Ramps hydraulically adjustable Ramps split, 2600-1400 mm Ramps hydraulically operated 1 owner Original color Never used with tracked vehicles etc.

Condition: used, Year of construction: 2005, Technical Data: Cutting capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest residual piece length: 35 mm Total connected load: 2.0 kW Saw motor, frequency-controlled: 1.5 kW Giedpfx Afsx Irx Is Sjw Infinitely variable cutting speed (frequency-controlled): 20 - 110 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, upper part fully raised: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Features: - Infinitely variable cutting speed - Saw band guides made of carbide, replaceable - Hydraulic saw feed - Mechanical saw band tensioning - Machine light - Saw band cleaning via freely rotating, easily replaceable wire brush - Coolant supply via 1 coolant nozzle and 1 coolant hose, coolant tank capacity approx. 45 l, pump capacity 16 l/min - Minimum quantity lubrication - Infeed roller conveyor (1000 mm) and outfeed roller conveyor (2000 mm) with scale and length stop

Condition: used, Year of construction: 2012, Technical data: Cutting range round / square / rectangular ø: 400 / 350 x 350 / 380 x 300 mm Saw blade dimension: 650 x 50 x 2.5 mm 3 stroke speeds: 40 / 62 / 90 strokes/min Drive power: 3.0 kW Footprint (WxDxH), approx.: 1800 x 650 x 1250 mm Weight, approx.: 1050 kg Gedpfxsydittj Af Seiw Equipment: - 3 stroke speeds - Infinitely variable cutting pressure adjustment - Minimum quantity lubrication - Pre-tensioned plate guide for the saw frame - Dustproof enclosed gearbox - Accelerated return stroke of the saw frame - Enclosed oil hydraulic system - Coolant device - Limit switch - Automatic lifting of the saw frame - Miter device up to 45° - 1 new saw blade

Year of construction: 2024, condition: new, functionality: fully functional, Semi-automatic horizontal orbital stretch wrapping machine designed for wrapping long products such as timber, aluminium profiles, plastic extrusions, pipes, textiles and similar materials. Equipped with infeed and outfeed roller conveyors for easy product handling. Modell Robopack Compacta 12 Production year 2024 Installed power 1,5 kW Diameter 1200 mm Feeding roller Yes Outfeeding roller Yes Condition New (not used) Godpfx Afozkf Sks Sjiw Conveyors 2 pc. INCLUDED

Condition: used, maximum load weight: 39,470 kg, overall weight: 48,400 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 11/2026, total width: 2,550 mm, Year of construction: 2012, Equipment: ABS, 4-axle Meusburger MTS-4 semi-trailer lowboy VIN: WO9TS401C0M49438 Chassis / Components: * Air suspension with raising and lowering function * First axle can be lifted * Axles 3 + 4 with trailing/friction steering * EBS/ABS braking system * 4 x BPW ECO axles with drum brakes * Tires: 205/65 R17.5 * Remaining tire tread: * 1st axle: approx. 60% / 60% * 2nd axle: approx. 30% / 60% * 3rd axle: approx. 30% / 60% * 4th axle: approx. 30% / 60% * 6 x PVC storage boxes * 2 x spare wheels * Outrigger supports at the rear * Extension plates * 6 pairs of heavy-duty lashing points * 9 pairs of lashing points Superstructure: * Semi-trailer lowboy * Unladen saddle height 1150 mm * Length upper platform: approx. 3,650 mm * Length lower platform: approx. 9,870 mm * Total loading area length: approx. 13,520 mm * Internal width: approx. 2,550 mm * Loading height: approx. 870 mm * 8 pairs of long stakes * 1 pair of short stakes * 6 pairs of stake pockets on the outside * 1 pair of stake pockets on the upper platform * 1 pair of centrally positioned stake pockets on the upper platform Weights: * Permissible total weight: 48,400 kg * Tare weight: approx. 8,930 kg * Payload: approx. 39,470 kg Other: * German registration * TÜV (technical inspection) valid until 11/2026 * HU (periodic technical inspection) valid until 05/2027 * Ready for immediate use New main inspections / safety checks or weight adjustments (reduction/increase) are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sales and errors. All rights reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading vehicles We will gladly help you with the loading of your purchased vehicles. Organizing special transports We will gladly help you in organizing special transports. Day license plates / export license plates We will gladly help you in obtaining export/short-term license plates. Godpjy Trmvefx Af Ssiw Handling customs formalities We will gladly help you in handling customs matters.

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Gijdpfx Aevtrkijf Ssw Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Gsdpfx Afjq Dzi Ts Soiw Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2007, loading space length: 13,600 mm, loading space width: 2,550 mm, Equipment: ABS, Doll S2H Lowboy, Extendable, Steerable Axle . For inquiries: 0626546 * Condition: very good * ABS * EBS * 2-axle, air-suspended * Hydraulic steering with 60° steering angle * BPW axles Dimensions (loading area/platform) Length of lowboy: 10,350 mm + platform: 3,300 mm * Loading area width: 2,550 mm Tires: 1st axle: 235 / 75 R 17.5, 40%, air-suspended, steerable axle 2nd axle: 235 / 75 R 17.5, 40%, air-suspended, steerable axle ----Price: EUR 22,900 + 19% VAT Gijdpfezi Hzwex Af Sow For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale excepted.

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm - 3 nailing positions along the height Gijdpfxozap I Ae Af Sjw - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible

Condition: new, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, crane, Step-frame semi-trailer in roll-off tipper design 3 axles with disc brakes SAF axles Lift axle Tires 385/55 R 22.5 Gear-driven winch LED lighting Work lights 25-ton capacity in sliding/articulated design for container lengths up to 7,500 mm Roller height approx. 1,300 mm Giedezirgxspfx Af Sew Hydraulic internal locking Soft stop Quick release Fifth wheel as loading platform with side boards 1 unit available in stock. Different equipment/design available on request. Further information available on request.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 03-2018, For sale: perfectly preserved and fully operational semi-automatic flexo printing machine for corrugated board, manufactured by the renowned EMproject 89. Built in 2018, this machine is designed for reliable and precise 2-color printing on cardboard packaging. The machine is currently connected to power, fully functional, and ready for work. It is ideal for printing logos, barcodes, and graphics on shipping, industrial, or transport boxes in a single pass. Key Technical Specifications: Manufacturer: EMproject 89 (Serbia) Model: FLEXO PRINTER MS-1700/1400 Gjdpfx Afszilvgo Seiw Year of Manufacture: 03 / 2018 Number of Colors: 2 (Two-color printing) Maximum Cardboard Format: 1700 mm x 1400 mm Voltage: 220 V Condition: Fully operational, well-maintained, testing possible before purchase. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Price is negotiable for serious buyers upon inspection. We also have other cardboard manufacturing equipment available printing machine (Flexo Printer EMproject 89), automatic paper slitting and rewinding machine YYS-I ( 2023), automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: excellent (used), Year of construction: 2002, operating hours: 20,000 h, functionality: fully functional, working width: 1,700 mm, type of input current: three-phase, total width: 4,500 mm, total length: 8,030 mm, total height: 2,150 mm, power of the servo motor: 20 W, overall weight: 34,000 kg, input voltage: 380 V, Semi-automatic die-cutting machine. Gjdpfezidhbjx Af Seiw Manual sheet feeding, die-cutting section, waste removal section, and palletizing.

Condition: good (used), mileage: 638,000 km, Year of construction: 2019, Scania R450 NGS 6x2 Machine Transporter / Tilt-Bed Truck Euro 6 Automatic - Full Air Suspension - 2019 638,000 km, valid MOT until 12-2026!! Dutch registration, ready for immediate use! Giodpozh Uv Tofx Af Sjw Length: 790 cm Width: 254 cm Height: 116.5 cm Payload: 14,017 kg We have a continuous stock; see our website. Prices are quoted ex Nuland. A video can be sent via WhatsApp. Interested in financial leasing? Inquire about the options. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, empty load weight: 7,583 kg, maximum load weight: 14,417 kg, overall weight: 22,000 kg, axle configuration: 1 axle, loading space length: 11,016 mm, total length: 2,490 mm, total width: 2,480 mm, suspension: air, rear tire size: 275/70 R22.5, Equipment: ABS, | Krone SE Refrigerated Semi-Trailer | Single-axle semi-trailer with turntable steering | Tires 275/70 R22.5 | Carrier 1550 | Electric and diesel deep-freeze unit | Dhollandia DHLM 2000kg tail lift | Twin tires | Internal dimensions: Height: 2.48m, Width: 2.49m | Errors, typing errors, and prior sale are subject to change. Giedpozf Itmefx Af Sjw

Condition: used, maximum load weight: 27,300 kg, overall weight: 36,000 kg, first registration: 06/2018, next inspection (TÜV): 06/2026, loading space length: 13,100 mm, loading space width: 2,500 mm, Equipment: ABS, * ABS * Front support legs * Rear support legs * Steerable axle * BPW ECO-Plus axles ----Structure: Low-loader semi-trailer (5,150 + 7,950 mm), loading height approx. 850 mm, sloping towards the rear, access height approx. 700 mm, steel/wood floor, lashing points, hydraulic access ramps, also hydraulically adjustable sideways, hydraulic rear support legs.----3rd axle: Follower steering axle Gsdszhyuhjpfx Af Sjiw For sale only to businesses. IN THE EVENT OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis of all purchase agreements, invoices, pro forma invoices, orders, and sales negotiations are our General Terms and Conditions (see our Legal Notice for details).

Condition: used, Year of construction: 1997, machine/vehicle number: 971004, functionality: fully functional, input voltage: 230 V, input current: 24 A, input frequency: 50 Hz, type of input current: DC, year of last overhaul: 2026, Equipment: CE marking, 5 C – Schaeffer SH2000-160 Industrial Snap Fastening Machine – Dual Head Semi-Automatic Unit Description: For sale is a Schaeffer industrial snap fastening machine, model SH2000-160, designed for efficient attachment of metal snaps and similar fasteners in garment production. This industrial unit features a dual-head fastening system and semi-automatic operation modes, allowing improved productivity and consistent results compared to manual setups. The machine is equipped with a belt-driven mechanical press system and integrated control panel with selectable operating modes. The machine has been used in a professional garment factory environment and is being sold due to factory closure. Its construction enables stable and repeatable fastening operations, making it suitable for continuous production processes where consistency and efficiency are required. Includes: Godpjy Aiafsfx Af Ssiw • Schaeffer SH2000-160 fastening machine • Dual-head fastening system • Integrated motor (Georgii Kobold) • Electrical control panel with operating modes • Hopper feeding capability • Heavy-duty pedestal base • Foot pedal control Technical details: • Manufacturer: Schaeffer GmbH (Germany) • Model: SH2000-160 • Dual-head configuration • Belt-driven mechanical press system • Operating modes: manual / automatic / hopper • Power supply: 3-phase (according to machine plate) Condition: Used industrial condition. Operational prior to factory shutdown. Sold as-is, where-is, without warranty. Inspection possible prior to dismantling. Typical applications: • Snap button / press stud attachment • Denim and workwear production • Outerwear manufacturing • Industrial garment production Sales terms: This equipment is sold due to factory closure and is being liquidated directly from production use. Sold as-is, where-is, without warranty. Buyer is responsible for: – ensuring suitability for own materials and production No claims accepted after sale. Removal & transport: Buyer responsible for dismantling and transport. Serviced 27.2.2026. Video in working situation taken 5.3.2026.

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 06/2023, next inspection (TÜV): 01/2027, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, mileage: 86,347 km, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available for rent from 4 weeks onwards – immediate availability – contact O. Schinke. Rent – please contact Mr. Schinke. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, access ramp 1,300 mm, Rear loading ramps 2950 x 1,700 x 900 mm, access angle approx. 11 degrees, hydraulic ramp lift, ramp hydraulically adjustable, Lubrication aid, Smart Board, loading platform extension, Spare wheel holder, including spare wheel, storage box, 1 front support: telescopic support, aluminum alloy, for coupling, 2 foldable rear support legs with spring holder, to operate the hydraulic components, a suitable truck hydraulic system with forward and return lines is required (not included in the scope of supply). Giodpozhknrjfx Af Sow Also available for long-term rental! Contact us – we will provide you with our individual offer. * ABS * Axle steering on the 2nd and 3rd axles * Lateral impact protection * Rubber-metal pads on the loading ramps * Plastic toolbox * Single lift axle * Platform side panels * Hydraulic ramp lift * Ramp hydraulically adjustable * Spare wheel holder * Rotating beacon * SAF axles * Smart Board * Supports * Warning package * Central lubrication system We explicitly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee; subject to changes, prior sale, or errors. We strongly recommend and offer an inspection and examination so that no false impressions arise about the condition and suitability with the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. We will take care of all formalities and hand over the vehicle with the desired transport license plates for an extra charge. The images have been partially edited and are only for initial viewing; if you are interested, please contact us and request current images.

Condition: new, Year of construction: 2026, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Gsdpfei D D A Sex Af Seiw Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, maximum load weight: 29,980 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2020, next inspection (TÜV): 12/2026, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2020, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: HRD Telescopic Semi-Trailer with Stowable Side Rails and Container Locking System (Vehicle 67) First Registration: September 22, 2020 Type: SPTM3N Original Mileage: 123,262 km Valid Inspection: 12/2026, Next Inspection: 06/2027 Permissible Gross Vehicle Weight: 39,000 kg Unladen Weight: 9,020 kg Payload: 29,980 kg Overall Length (not extended): 13,950 mm / (extended): 17,950 mm Height (road to loading platform): approx. 1,050 mm Overall Width: 2,540 mm Fixed front bulkhead with stowable side rails Axle Distance: 1,310/1,410 mm 1st Axle: Lift Axle 3rd Axle: Trailing Axle SAF Disc Brakes Tires: 445/45R19.5, 1st: approx. 70/70%, 2nd: approx. 70/70%, 3rd: approx. 70/70% Platform can be extended to 4 m, pneumatically unlocked Side extensions, illuminated and extendable at the front and rear Gedpszhhp Tjfx Af Sjiw 2 pairs of LED work lights on each side 2 x 12-ton, 2-speed geared winch WABCO ABS with mileage recording Axle locking and lift axle switch Open storage compartment at the rear with various large and small side rails 2 x Wheel chocks Flashing beacon at the rear 4 x LED reversing lights at the rear Rear-view camera + power sockets at the rear 2 pairs of heavy-duty lashing points at the rear, 13 pairs of lashing points in the outer frame 6 center lashing points, 8 pairs of stowable side rail pockets in the outer frame 5 container locking mechanisms 5 transverse beams in the floor (twistlock compatible) Manual support at the rear Price: €45,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, empty load weight: 12,200 kg, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 07/2027, suspension: air, tire size: 235/75 17,5, tire condition: 80 %, color: black, Year of construction: 2024, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, R17,5 * Tire sizes: 235/75 R17,5 * hydr 26t loading ramp * Remote control for loading ramp * Rear-steering axle * Saddle height 1250mm * Low-bed length incl. slope 9200mm * Gooseneck length 4300mm * Internal height low-bed 3050mm * Loading height low-bed 920mm Giodpfx Afszhfu Tj Sow * Rear outrigger extension 400mm each * Fifth wheel plate with interchangeable kingpin * 30mm Omega floor * 24t support * Axle load detection in the truck * Tire pressure monitoring * Extendable warning signs * 10-year warranty against rust * Upon request, we will gladly send you a video * Further pictures and a construction description Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.