Used Romer Ultrasonic Bath for sale (792)

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. Hfodpfjfz U Hvox Aa Eei This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean Hfodpfxofz U Swj Aa Eji

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Hsdpfxofz U S Eo Aa Ejfi - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Hodefz U Tijpfx Aa Ejfi Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Hfedpfx Aasyg H Dhe Eoi 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Hydraulics from Rexroth Hfodpoqcu Acjfx Aa Eji with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: new, Year of construction: 2024, Povder sieve Model SV-200 Screen type stand Hedsbwh S Sopfx Aa Ejfi Mesh 149 µ External dimensions 700 x700 x1200mm 220-240V voltage Power Consumption 40W Performance ~ 20kg/5min Frequency of 50Hz Tank with fluidisation

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Hfodpexv Ayvefx Aa Eji Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: new, Year of construction: 2020, Model: KPZ-2 Type: Enclosed Working dimensions: 900 W x 1300 H x 900 D External dimensions: 980 W x 2100 H x 1600 D Operation: Electric Power: 0.69 kW x 2 Hsdpfx Aaob Al Sbo Esfi Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of filters: 3 Filter area: 22.5 m² Fan: Aluminum Fan noise level: 74 dBa Air flow: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available upon request.

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Hfedpfoxhfl Ejx Aa Esi Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: new, Year of construction: 2026, functionality: fully functional, Specifically designed for small businesses and wheel coating companies. Complete system, consisting of: Powder coating oven, dimensions: width x height x depth 1200 x 1600 x 1200 mm, 15 kW Hfjdpfxog Ngt Ns Aa Eoi Powder coating booth, dimensions: width x height x depth 2000 x 2240 x 920 mm Latest powder gun from the ROMER ProfiSpray series All together for 16,990.00 net, plus shipping and installation.

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), Recirculating air oven, oil/gas fired, model SOS 80 O Exhibition machine Technical data: Usable chamber dimensions: Hsdsc Nbitspfx Aa Eefi Width approx. 1200 mm, height approx. 1800 mm, depth approx. 3000 mm Hanging rack available on request Material: Internal housing: 0.8 mm steel sheet, tightly welded or riveted External housing: 0.8 mm steel sheet, base plate: 1.5 mm steel sheet Paint finish: RAL 1013, standard, powder-coated Insulation material: High-quality mineral wool Insulation thickness: Walls – 160 mm, ceiling: up to 240 mm, density 100 kg/m3 Performance data: Heating type: Oil, heating output: approx. 80 kW 1 oil burner with 80 kW Total connected load: approx. 5.4 kW Temperature range: up to 250°C, continuously adjustable Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale.

Year of construction: 2010, condition: good (used), functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Hodpfxovt Sc Ej Aa Esfi Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm LxWxH: 400 x 500 x 1200 mm

Year of construction: 2016, condition: ready for operation (used), - USED - 3D MEASURING MACHINE Hsdpfx Aaszlu Tao Eefi NOTE: PORTABLE 6-AXIS 3D MEASURING ARM, MAX DIAMETER 3000mm, WITH PIECE TOUCH DETECTOR, TRESTLE AND MAGNETIC BASE

Condition: new, Water bath/cooling trough for strand cooling during strand pelletizing. Made of stainless steel, suitable for various applications in plastics processing. Various lengths in stock, e.g., 3.5 m. With integrated strand guide rollers for safe and even cooling. Robust design, ready for immediate use. Hsdpfxewcdh Dj Aa Ejfi We would be happy to send you further pictures and details if you are interested!

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic cleaning unit with pneumatic goods lift and oscillation during the cleaning process including surface rinsing/oil separator Platform dimensions: approx. 670 x 420 mm Hedpfx Aaeh Rmpds Esfi max. usable height: approx. 300 mm max. load capacity of goods lift: 100 kg Volume: 200 liters (incl. oil separator) Material of tank and outer casing: stainless steel 1.4301 Ultrasonic power as bottom sound: 1,600 watts (effective) / 3,200 watts (peak). Frequency 38 kHz (suitable for aluminum and non-ferrous metals) including level monitoring and dry-run protection Unit is equipped with rollers (movable) Total electrical connection power: 8 kW External dimensions: 1,300 x 1,000 x 1,000 (h) mm Total height including goods lift and open lid: 1,500 mm

Year of construction: 2014, condition: ready for operation (used), A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment. Hfjdpfxozlt Rwj Aa Eoi

Condition: refurbished (used), Year of construction: 2004, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 014404, total width: 2,600 mm, total length: 1,750 mm, total height: 2,350 mm, maximum load weight: 50 kg, tank capacity: 230 l, compressed air connection: 6.5 bar, input voltage: 380 V, year of last overhaul: 2026, Hösel Solvacs-2 with additional distillation unit. The system and the distillation unit have both undergone a professional general overhaul. The system is connected to the power supply and is ready for inspection and a test run. Hedszln Iqjpfx Aa Ejfi The system requires external cooling.

Condition: used, functionality: unexamined, Ultrasonic welding system, Ecoline 20L model - Ultrasonic generator K5 2000W/20kHz - Shipping available for an additional charge. Hsdpfjzlchljx Aa Esfi

Condition: excellent (used), Julabo Julabo Transparent Circulating Bath Thermostat CT 72/P incl. ED Thermostat Item Description: For sale is a Julabo transparent circulating bath thermostat CT 72/P with Julabo ED (v2) temperature controller. This unit comes from a laboratory inventory and is in used but technically fully functional condition. Hfodpfx Aozix Dqea Eji The bath heats and controls temperature accurately and stably, and circulation is present (see photos). Ideal for laboratory, industrial, educational, testing, or development applications. Technical Data (excerpt) Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Bath temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating capacity: 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / stainless steel Interface: RS232 Power supply: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and data are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Condition: used, This listing is for a Nickel Electro Water bath Hfodpfx Aajxzh Hrj Esi

Condition: used, Year of construction: 2016, functionality: unexamined, total width: 2,300 mm, total length: 2,300 mm, total height: 1,900 mm, type of input current: three-phase, inner dimension height: 500 mm, inner dimension length: 1,900 mm, inner dimension width: 1,900 mm, overall weight: 800 kg, input voltage: 400 V, Large industrial ultrasonic cleaning bath with integrated heating system from DeSonic. The bath offers a usable area of approximately 1900 x 1900 mm with a depth of 500 mm and is suitable for the industrial ultrasonic cleaning of large-volume parts, tools, and components. The system features a control unit with an ultrasonic timer, bath temperature control, as well as level and filtration control. The unit is used and is in a partially disassembled condition. The stainless steel bath shows normal signs of wear and tear consistent with its use. Sold without the contents shown in the picture. Scope of delivery: 1 Ultrasonic cleaning bath with heating system Control unit with ultrasonic timer and bath temperature control Connecting cables and hoses as shown in the picture Without cleaning agent and other consumables * Year of manufacture: 2016 * Condition: partially disassembled * Bath depth: 500 mm * Temperature controller: eliwell ICPlus 902 * Ultrasonic timer: eliwell EWTS950 LX * Control: Ultrasonic timer, bath temperature, level (bath), level (tank), heating on/off, filtration on/off ― * Bath length: approx. 190 cm * Bath width: approx. 190 cm * Bath depth: approx. 50 cm Hjdezkufaspfx Aa Eefi * Transport dimensions (L x W x H): approx. 230 x 235 x 190 cm

Condition: used, functionality: fully functional, For sale is a salt bath black oxide system, including a crane and fume extraction system, as well as various accessories. The black oxide system was built in-house and approved, but does not have a CE marking. Tank dimensions: Length: 990mm, Width: 490mm, Height: 680mm Consisting of 6 tanks Hsdpfxezkf E Rs Aa Esfi Overall dimensions: Length: 4.70m, Width: 1.40m, Height: 0.95m Crane and fume extraction system included in the price + 6 additional heating elements Disassembly and collection by the buyer! Inspection possible at any time by appointment.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos Hfodpfxjyxm Hnj Aa Esi -Number: 3x ultrasound transducer units available -Price: per piece -Dimensions: 450/100/H145 mm -Weight: 15.7 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 93420 353599 -Horn: Type CTC2058800 -Ultrasonic sonotrode: Number: 7x ultrasound transducer units available Hfodsxrzwrspfx Aa Eji Price: per piece -Dimensions: 450/110/H120 mm -Weight: 6.1 kg/pc.