Used Risco Rs1040 Mas for sale (3,269)

Condition: good (used), Year of construction: 2002, Chain saw / chain cutter from MASTERWOOD Year of manufacture: 2002 Njdpfx Amozn A Eieyocw Model: OM MINOR Used machine, immediately available.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts Nodoznz Ezjpfx Amyocw • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: excellent (used), Year of construction: 2025, Demonstration machine Njdpfxeydf Duj Amyecw Strapping machine, Easy Strapper model 12mm strap Frame size 850x600

Condition: as good as new (ex-display), Year of construction: 2027, functionality: fully functional, This is a BOD Box on Demand exhibition machine in virtually new condition. It is the ideal solution for your highly flexible on-demand packaging project. The machine has a width suitable for continuous corrugated cardboard up to 2500 mm. Ncedsznw T Iopfx Amyew It features a 2CL carton changer system and SbS for up to 2 carton stacks side by side. This allows up to 4 corrugated cardboard stacks to be loaded into the machine simultaneously. The machine can be inspected at any time. The machine is available for immediate delivery – while stocks last.

Condition: excellent (used), functionality: fully functional, Pamasol Single Stage Filler Type: 2079 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland. Ncjdpfjznw Aijx Amyjw

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Type: 2005/100 Ncedeznwwaopfx Amyjw Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, 1 x Comas DP Depositor Type-800 8-lane (Serial no. 2614, Date of manufacture – 1997). Nodpfx Amozcaz Ejyscw Videos available on request. All equipment to be removed from the factory by the Buyer.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, REF: MM6450 1 x Comas MUFFIN LINE 8-lane depositor. Type-IS 800. Serial no. 3505. Date of manufacture – 2003). Ncedpfx Amszcb E Seyjw All equipment to be removed from the factory by the Buyer.

Condition: good (used), Year of construction: 1989, ELB HK-Orion Precision Surface Grinding Machine A high-quality, robust horizontal surface grinding machine from the premium brand ELB-Schliff. This machine is ideally suited for workshops, toolmakers, and demanding users who require absolute precision in surface grinding. Equipment & Condition: Ncedpfxoznt Hde Amyow Electromagnetic chuck: Fully functional, including the associated 130V DC control system operated via the control panel. Coolant system: Separate, external settling tank including a functional coolant pump and return chute. Operation: Clear, swiveling control panel for managing axis movements. Technical Data Manufacturer: ELB-Werkzeug- u. Maschinenbau Machine No.: 20600 Operating voltage: 3x 380 V / 50 Hz (three-phase current) Rated current / Fuse rating: 20 A / 25 A Control voltage: 220 V / 24 V Magnetic chuck DC voltage: 130 V / 4 A Year of manufacture: 08/1989 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2021, Sema Systemtechnik 1200s Carton erector Ncodpfszmakaox Amyew comprising Nordson ProBlue Liberty 14 hot melt unit 455x400xmm (300x195x30mm folded) carton size Condition: Good Sublocation: E3

Condition: excellent (used), functionality: fully functional, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Ncedpfxezcv S He Amyow Permanent software license Manufacturer Company: Massivit 3D Printing Technologies Model: Massivit 1800 Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET902P3 - 2200404795, cooling capacity: 178 kW (242.01 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,907 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 30.4 m³/h, pump pressure: 3.16 bar, total width: 1,250 mm, total length: 4,660 mm, total height: 2,150 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler / chiller / chilled water unit, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled, compact chilled water units suitable for outdoor installation (from -5°C to +46°C). Includes crankcase heater, phase monitoring, 950-liter buffer tank, and integrated P3 circulation pump. Chilled water outlet temperatures from -10°C to +30°C can be set. Cooling capacity kW 178 Chilled water temperature outlet/inlet (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ncodpfxery Udpe Amyow Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200404795 Year of manufacture 2023 Condition: Visually 1, Technically ok (Warehouse item, as new) Price: upon request (Subject to technical changes and prior sale!) Used machines may have visual defects due to their use. Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Radial drilling machine, Kolb, heavy-duty design. Nedoznl Dbjpfx Amyocw

Year of construction: 2009, condition: good (used), functionality: fully functional, Ice cream machine, Weber Njdpfx Asznlmcemyocw Model: W I R 400 Year of manufacture: 2009 Includes ice cream cart Capacity: 400 kg per 24 hours Rotary evaporator Refrigerant: R404A Shipping possible

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET251P3 - 2200399023, cooling capacity: 49.7 kW (67.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 998 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 8.48 m³/h, pump pressure: 2.61 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, Process air cooler/chiller/chilled water unit, air-cooled, Type: TAEevo Tech 251 P3 – 49.7 kW MTA S.p.A. TAEevo Tech 251P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Includes crankcase heater, phase monitoring, 350-liter buffer tank, and built-in P3 circulation pump. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 49.7 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 8.48 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 27 Max. current (A) 46 Starting current circuit (A) 144 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Price: upon request in Euro (plus VAT, ex works Nettetal) – 3 months warranty Serial no.: 2200399023 Year of manufacture 2023 Condition: Visually 2, Technically okay Used Nsdpfxjznk Hhs Amyjcw (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Nedpfxeznkx Dj Amyscw Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Shima Seiki SFJ 202-T Flat Bed Knitting Machine with Shimatronic Control 07G. S/No. 468. Country of Origin: Japan Please Note: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site. Dismantling and loading will be at the cost of the purchaser. Nsdpfx Asznkrkomyecw

Condition: excellent (used), Machine for grinding bookbinding knives. grinding length 1500 mm. new grinding head. Ncodpfowm Ht Rjx Amyjw

Condition: good (used), Donau Danuflex-128 High-Speed ​​Radial Drilling Machine A manual high-speed radial drilling machine from the renowned German manufacturer DONAU Werkzeugmaschinen. This class of machine is characterized by an extremely flexible, smooth-moving swivel system and is primarily used in tool and fixture making, as well as in single-part and small-batch production. Technical Specifications Tool holder: MT4 (Morse Taper 4) Clamping table: 500 x 1055 mm Ncsdpfx Amjzni T Hjyow Maximum reach: 1120 mm Spindle stroke: 160 mm Column diameter: Ø 150 mm Speed ​​range: 45 – 2240 rpm (electrically selectable steps) Feed range: 0.075 – 0.3 mm/rev Motor power: 1.5 / 2.2 kW Total weight: approx. 1,800 kg Additional equipment: Integrated thread-cutting unit "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Nsdszni Rxjpfx Amyscw Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely robust mechanical design and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical specifications (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: 08/2000 Electrical connection: 380 V (CEE plug included) Pneumatic connection: 6 bar "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), CATALOGUE NUMBER: 6582 TECHNICAL DATA - max. width of workpiece: 920 mm - max. height of workpiece: 150 mm Njdpfxezcmqte Amyscw 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW From above: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers From below: - 3 slip rubber rollers - conveyor belt - pneumatic tape oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg – German made – 2 units – used grinder, very good condition Net price: 24,900 PLN Net price: 5,929 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Walter+Bai LFV100-HH Servo-Hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-Hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including hydraulic power unit PAC-40, PCS8000 Digital Controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial production. The original Walter+Bai testing software, the corresponding software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-Hydraulic Universal Testing Machine Njdpfjzlz Rxsx Amyocw Series: LFV 100 kN Factory Number: 2279 Order Number: K25788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control: Walter+Bai PCS8000 Digital Controller Digital testing machine control Original Walter+Bai testing software available Original software dongle available Industrial PC included in the scope of delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Power Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic hydraulic power unit Water-cooled design Designed for continuous operation PCS8000 Digital Controller mounted Dimensions: Testing Machine (W × D × H): approx. 1,150 × 850 × 2,650 mm Hydraulic Power Unit PAC-40 (W × D × H): approx. 800 × 700 × 1,150 mm Overall transport dimensions (L × W × H): approx. 1,600 × 1,100 × 2,800 mm Weight: Testing Machine: approx. 1,350 kg Hydraulic Power Unit PAC-40: approx. 250 kg Total weight: approx. 1,600 kg Shipping weight: approx. 1,850 kg Clamping System: 2 × mechanical wedge clamping heads Walter+Bai WGR-100-M Several sets of clamping jaws Clamping and mounting accessories as shown in the pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Several sets of clamping jaws Handheld control unit Separate control unit with emergency stop Testing and mounting accessories as shown in the pictures Condition: Used Year of Manufacture 2019 Optical condition as shown in the pictures. Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Sets of clamping jaws Handheld control unit Control unit Further accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Nsdpfx Aoznhwdemyecw Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: used, Year of construction: 2014, Machine design: Continuous/Reciprocating Working area in X-direction: 1000 mm Nsdpfjzndmhex Amyocw Working area in Y-direction: unlimited Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 3.3 kW Clamping system: HSK-63 F Tool changer: Pick-up tool changer Number of tool change stations: 3 Back wall grooving units: fixed in the Y-direction Vertical drilling spindles - in the X-direction: 5 Vertical drilling spindles - in the Y-direction: 5 Spindle speed, vertical drilling spindle: 4000 rpm Horizontal double drilling spindle in the X-direction: 2 Horizontal double drilling spindle in the Y-direction: 1 Spindle speed, horizontal drilling spindle: 4000 rpm Monitor size: 17" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: Masterwork DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table design: Fixed table with rollers Weight approx.: 1300 kg Dimensions: 2200x2470x1590 mm Location: Customer

Condition: new, Year of construction: 2026, machine/vehicle number: K00626, functionality: fully functional, operating hours: 2 h, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 600 mm, cutting width (max.): 430 mm, control type: manual, actuation type: manual, total height: 2,500 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, BAUER Vertical Band Saw VG 450 L Precision and performance for demanding miter cuts The BAUER VG 450 L was specifically designed for the precise sawing of steel, stainless steel, aluminum, and other metals. Thanks to its robust machine construction, hydraulic miter adjustment, and intelligent cutting pressure control, it offers the highest cutting quality with simultaneous ease of operation. Nodpfxsznc Sps Amyecw Whether for individual parts, series production, or workshop use, the VG 450 L impresses with its reliability, precision, and efficient operation.