Used Rühle Injector for sale (157)

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Kodpfxjgwbbqo Ap Aelw Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Kodpjw Ug A Hsfx Ap Aslw - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system - Total installed power KW 5 ca.

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): Kjdpfx Asvnq Txop Aslw W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 Kljdoxm Rwqspfx Ap Aew 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. Similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop Klodpfx Ashf Na Ssp Aew CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop Klodpfehf Na Iox Ap Asw General specifications: ----- Drive motor power: 7.5 kW (50Hz) / 9 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: excellent (used), mileage: 799,500 km, power: 301 kW (409.25 HP), first registration: 09/1996, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1996, Equipment: ABS, air conditioning, differential lock, parking heater, power mirror, = Additional Options and Accessories = - 430-litre diesel tank - Aluminium fuel tank - Heated mirrors - Driver’s comfort seat - Differential lock - Differential lock - Speed limiter - Hydraulic system - Tipping hydraulics - Air-suspended seats - Hub reduction - Radio/CD player - Sun visor - Auxiliary heater - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF16 manual gearbox = Notes = NICE CONDITION HEAVY DUTY M.A.N. 26.403DFT SLEEPER CAB 6x4 TRACTOR UNIT, REDUCTION AXLES & ZF MANUAL GEARBOX, HYDRAULIC KIT & AIR CONDITIONING!! 400 HP, EURO 2, 6-CYLINDER ENGINE (NO ELECTRONICS, MECHANICAL PUMP & INJECTORS)!! ZF MANUAL GEARBOX!! REDUCTION AXLES!! P.T.O.!! HYDRAULIC KIT!! SLIDING FIFTH WHEEL!! AIR CONDITIONING!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US – WE ARE A ONE-STOP SHOP COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,816 cc Transmission Gearbox: ZF16 manual transmission, 16 gears, manual shift Axle Configuration Tyre size: 315/80R22.5 Kjdpfxoymqm To Ap Ajlw Front axle: Max. axle load: 7,500 kg; Steering axle; Left tyre tread: 40%; Right tyre tread: 40%; Brakes: disc brakes; Suspension: leaf suspension Rear axle 1: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Reduction: outboard planetary axles; Brakes: drum brakes; Suspension: air suspension Rear axle 2: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Reduction: outboard planetary axles; Brakes: drum brakes; Suspension: air suspension Weights Kerb weight: 9,000 kg Payload: 17,000 kg Gross vehicle weight: 26,000 kg Functional Load compartment capacity: 400 l Loading height: 130 cm Condition Technical condition: very good Optical condition: very good Further information Please contact Sales Department or Erik Engel for further details.

Condition: used, Year of construction: 2016, working width: 5 mm, Equipment: lighting, -40 hollow discs, diameter 510 mm / -Maintenance-free, large-dimension bearings / -Injector positioned 250 mm behind the first disc / -Hydraulic folding mechanism / -Hydraulic transport lock / -Very compact design / -Low Ksdpfx Apjy Dgp Ho Aelw

Condition: excellent (used), mileage: 999,990 km, first registration: 08/1997, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 620 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 1997, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and equipment = - 2 bunks - 600-liter diesel tank - Heated exterior mirrors - Comfort driver's seat - Roof spoiler - Speed limiter - Radio/CD player - Sleeper cab - Sun visor - ZF16 manual transmission = Notes = GOOD CONDITION DAF FT95-380XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX, ROOF SPOILER & AIR CONDITIONING!! 380HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! 620-LITER DIESEL TANK!! AIR CONDITIONING!! SPOILER ON CABIN!! ETC!! Kjdpfx Ajx H Sr Sjp Aolw TRUCK IS IN GOOD DRIVING CONDITION, READY FOR THE HEAVY JOBS!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!!

Condition: excellent (used), mileage: 77,200 km, power: 180 kW (244.73 HP), first registration: 05/1989, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro1, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1989, Equipment: differential lock, = Additional Options and Accessories = - 8-speed manual gearbox - 400-liter diesel tank - Heated mirrors - Full leaf suspension - Differential lock - Differential lock - Speed limiter - Battery master switch - Hydraulic system - Hub reduction axles - Radio/CD player - Power Take-Off (PTO) - Power Take-Off (PTO) = Remarks = HEAVY DUTY M.A.N. 26.240DFT DAYCAB 6x4 FULL STEEL SUSPENSION TRACTOR UNIT, REDUCTION AXLES & ZF MANUAL GEARBOX!! 240HP, EURO 1, 6-CYLINDER ENGINE (NO ELECTRONICS, MECHANICAL FUEL PUMP & INJECTORS)!! ZF MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLES!! P.T.O.!! HYDRAULIC KIT!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE FROM STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! () ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Gearbox: ZF 8-speed manual gearbox Axle configuration Brakes: Drum brakes Kjdox N Sw Tepfx Ap Ajlw Suspension: Leaf suspension Front axle: Tire dimension: 315/80R22.5; Max. axle load: 7,500 kg; Steered; Left tire tread: 20%; Right tire tread: 20% Rear axle 1: Tire dimension: 11R20; Twin tires; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Hub reduction: Outer planetary axles Rear axle 2: Tire dimension: 11R20; Twin tires; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Hub reduction: Outer planetary axles Weights Curb weight: 9,000 kg Payload: 17,000 kg Gross vehicle weight: 26,000 kg Operational Cargo area capacity: 400 l Superstructure brand: ZF Loading platform height: 130 cm Condition Technical condition: very good Visual condition: good Further information Please contact Sales Department or Erik Engel for more information.

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Ksdpfx Aeyq Irhsp Aslw Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW Kodpfxsyap Icj Ap Aolw - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Condition: used, mileage: 680,000 km, power: 375 kW (509.86 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, * Mercedes-Benz 2651 Actros MP2 V8 Tractor Unit * First registration: 2008 * 680,000 km * Euro 5 * Telligent manual transmission with clutch * Tipping hydraulics * Leaf/air suspension * 6x4 axle configuration * Air conditioning * Retarder * Mega cab * Wheelbase: 3.30 m * Unladen weight: 9,575 kg * All injectors replaced! * Engine runs unevenly and smokes * Camshaft likely damaged Special equipment: Work lights on rear cab wall (top), audio system: Radio Truckline CC 65 / 70 with cassette deck, 220 Ah battery, comfort cockpit, air horn, movable cab entrance, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, auxiliary drive MB 2C, Voith retarder, low-maintenance fifth wheel, Fischer fifth wheel coupling, circuit breaker, seats in cab: driver's comfort suspension seat incl. horizontal suspension, sun visor, 24V socket in cab, straight front axle, transmission oil cooler Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer socket 24V / 15-pin, work lights, electrically adjustable and heated exterior mirrors, wide-angle exterior mirror heated (left), outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf / air, electric window lifters, 80 A alternator, 16-speed transmission, interior filter: pollen filter, body/chassis: tractor unit, fuel tank: 400 litres, engine: 16.0 litre 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 3300 mm, fifth wheel coupling: mounting height 150 mm, disc brakes, steel rims 9.00x22.5, cab control, Telligent shifting, Telligent brake system with ABS+ASR, front underrun protection, CB radio pre-installation, telephone/fax pre-installation, immobilizer, central locking incl. key, permissible total weight 26.0 t Kljdpfx Ajyq A Drjp Aow

Condition: used, We offer an industrial NOWICKI vacuum tumbler, model MA-2000 PSCH, year 2003 – a device designed for massaging and curing red meat, poultry, and bone-in cuts under vacuum conditions. The 2000-liter capacity tumbler with cooling is ideal for large meat processing plants, poultry processing plants, and premium product manufacturers where high efficiency, uniform curing, and consistent quality of the finished product are important. Thanks to its vacuum operation, the NOWICKI MA-2000 PSCH improves protein binding, tenderness, and juiciness of meat, while minimizing oxidation and weight loss. A robust drum with mixing blades ensures gentle but intense mechanical action on the raw material, which shortens the massaging process. Installed power of 4.1 kW, which guarantees stable operation in continuous mode. Compact dimensions for its capacity – length 3150 mm, width 1400 mm, height 1750 mm – allow the device to be conveniently placed in an existing hall, also in lines with an injector, brine mixer, and smoking and steaming chambers. Klsdjytqnkjpfx Ap Aow Technical data: Manufacturer: NOWICKI Model: MA-2000 PSCH Year of manufacture: 2003 Type of device: vacuum massager with cooling Drum capacity: 2000 l Power: 4.1 kW Power supply: 3×400 V Weight: approx. 1500 kg Dimensions (L x W x H): 3150 x 1400 x 1750 mm

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,615 mm, total length: 1,650 mm, total width: 1,270 mm, wall thickness: 2 mm, input voltage: 400 V, overall weight: 450 kg, space requirement height: 2,850 mm, usable tank capacity: 1,000 l, rotational speed (max.): 1,450 rpm, REISCHL RMA 1000 – Advanced Stainless Steel Brine Mixer with HMI, Emergency Operation & High-Performance Flow Cooling Intelligent • Hygienic • Future-Proof Technical Highlights – RMA 1000 Smart HMI Control: Intuitive user interface for fast operator training and reliable processes. Emergency Operation: In case the touch panel fails, all functions remain accessible via robust mechanical buttons—maximum operational safety. Process Data Acquisition & Reporting: Complete batch documentation and export functionality. Remote Support: Global remote access for rapid assistance with zero downtime. Flexible Mixing System: Venturi principle for liquids and viscous solids (including scale ice). Stainless Steel Centrifugal Pump: Reliable, durable, hygienic. Hygienic Design: Lever locks, smooth surfaces, height-adjustable feet. Kodpfjw T R Haex Ap Aslw High-Performance Flow Cooling System: 1,000 litres from 15 °C to 0 °C within 15 minutes—fast and reproducible. Options: Insulated cooling jacket, automatic flow measurement, brine residue recovery, various pump configurations. Your Benefits Increased Efficiency: Automated, reproducible mixing and cooling processes. Operational Safety: Production continues even if the HMI fails thanks to emergency operation. Documented Quality: Quality assurance documentation at the push of a button. Future-Proof: Modular expandability and software updates available. Easy Integration: Perfectly matched to injectors and process lines. 👉 Price & details on request. Contact us for your customised offer—we will configure the RMA 1000 to perfectly suit your production line.

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Klsdpfx Apsiid Hwo Asw Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Blasting principle: Injector principle (suction blasting) Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Viewing window: Safety glass with replaceable protective film Kjdov Syvqjpfx Ap Ajlw Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Compact design – ideal for workshops and laboratories Quiet operation thanks to sound insulation Easy to maintain and durable

Condition: new, Year of construction: 2025, VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM The powder coating system is designed for powder coating applications with frequent color changes during the day. The equipment is on a wheeled stand for ease of operation. Kledevv N Tyepfx Ap Aow Powder coating is sucked directly from the powder box, which allows rapid color changes. The powder box is placed on the vibrating table, suction pipe fluidizes the powder coating in the box, ensuring effective mixing, and the powder coating is homogeneously sent to the gun through an injector placed on the suction pipe. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 55 Kg VG4 CONTROLLER AND MANUAL POWDER COATING GUN The VM manual powder coating gun is completely dismountable. The ergonomic gun handle design ensures ergonomic handling and does not tire the operator during coating application. The high voltage cascade has a long service life, its tightness prevents contact with dust and minimizes the risks in this area. The well-designed head assembly and nozzle ensure excellent polarization and homogeneous coating on surfaces during application. The electronic touch panel on the back of the gun provides ease of use during operation. The control unit is digital and allows precise adjustment of settings via the touch panel. TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Powder output (3,5 bar) 500 g/min Protection class : IP 54 Voltage cable length : 5 m Powder hose length : 5 m Gun weight (gross) : 450 g Operating temperature :-20-50 ° C Nozzle :Flat jet or Ø16-20-24mm deflectör

Condition: like new (used), Automatic injector 123 needles Loading width: 420 mm Kodoumk Txepfx Ap Ajlw Max. product height: 200 mm Needles quantity: 123 - 3 mm Transportation type: walking beam Pressure range: 0,5 - 4,5 bar El. 230/400 V, 50/60 Hz Connection value: 11, 0 kW 50/60 Hz Machine dimensions, mm: Length: approx. 2 200 mm Width: approx. 1 100 mm Height : approx. 2 350 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Kedpfx Asyk Empop Aolw Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Year of construction: 2020, condition: like new (used), Sympatec laser diffraction system. HELOS/BR multi range, laser diffraction sensor for particle analysis with automatic set-up of selectable measuring range of up to 5 range modules between 0.1 micron – 875 micron. RODOS, dry dispersing system, injector diameter 4 mm, bulk hardened steel; with funnel adapter, including flow – optimized extraction, recommended particle size range: product dependent up to 1500 micron. VIBRI, intelligent vibratory feeder, for the RODOS or GRADIS system family, complete, comprising chute, input funnel 150 cm3 and connecting cable for RS485. SUBMICRON module, R2, for HELOS/R multi range series, measuring range: 0.25/0.45 – 87.5 micron. Kjdpoh Nyfcefx Ap Aslw TOPMICRON module, R4, For HELOS/BR multi range series, measuring range: 0.50/1.8 – 350 micron. Nilfisk ATTIX 33-2H PC, 230V AC, dust class H Computer system Fujitsu ESPRIMO E957 E90+, i7-7700 3,60GHz, SSD. Fujitsu TFT display 27” PAQXOS software, for the operation of all Sympatec instruments with TCP/IP communication, for computers with Windows 7 or 10, on data storage media, including documentation and software protection key.

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: Ksdotw S Awspfx Ap Aslw - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Offered is a brine injector Günther PI-17 needle, year of manufacture 2000. In good condition, 380V, 16A. Further details on request. Cash payment or advance payment. Klodew R Tv Sjpfx Ap Ajw Sale to commercial customers only. No warranty, no liability.

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Klodpfxehf Nako Ap Aow Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: used, This listing is for a Waters Acquity H-Class UPLC. The unit is in full working condition and is ready for immediate release. Unit includes: TUV Detector Column Manager Sample Manager Binary Solvent manager Software and computer can be provided at extra cost. Unlock the full potential of your laboratory with the Waters Acquity H-Class UPLC System, a cutting-edge high-performance liquid chromatography (HPLC) solution designed for unparalleled flexibility and efficiency. This advanced system is engineered to deliver exceptional chromatographic separations, making it the ideal choice for pharmaceutical, biotechnology, food and beverage, and environmental applications. Key Features: Quaternary Solvent Blending: Seamlessly combine up to four solvents to optimize method development and enhance analytical workflows. Flow-Through-Needle Injector: Effortlessly transfer existing HPLC methods to UPLC, significantly reducing method development time and boosting throughput. Empower and MassLynx Software: Benefit from advanced data processing capabilities, including peak picking and integration, ensuring precise analysis and reporting. Kjdpfoxv Duuex Ap Aolw UNIFI Scientific Information System: Streamline data management for metabolomics, proteomics, and glycomics, facilitating comprehensive analysis. Benefits: Experience improved laboratory productivity as you transition to UPLC/UHPLC technology, reducing analysis time while increasing efficiency. Achieve enhanced resolution and sensitivity, allowing for more accurate analysis of complex samples. Simplify method development with advanced tools and software, accelerating the discovery of new methodologies. Applications: Whether you are conducting pharmaceutical research, analysing food safety, or monitoring environmental pollutants, the Waters Acquity H-Class UPLC System delivers high sensitivity and resolution for all your analytical needs. Elevate your chromatography capabilities today and transform your laboratory's performance with this innovative system.