Used Pinbone Remover for sale (4,265)

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R Nsdpfxey Auhze Af Selg

Condition: new, functionality: fully functional, Year of construction: 2026, The LCW 3000W is a compact and versatile 4-in-1 handheld laser system engineered for high productivity and operator convenience. Designed for industrial use, the machine unites welding, laser cleaning, cutting, and weld seam cleaning capabilities, making it highly suitable for manufacturing, repair, and maintenance environments. This unit is based on a Raycus 3000W fiber laser source and is equipped with an industrial water chiller for stable performance and outstanding reliability. Its touchscreen control system enables rapid parameter adjustments, saving of operating modes, as well as real-time diagnostics and warnings. An additional operator control panel ensures easy modification of parameters during use. The laser head is optimized for both welding and cleaning tasks, featuring optical protection and support for various welding processes, including spot welding, continuous welding, fish-scale welding, and full seam welding. The result is a clean, uniform, and visually appealing weld seam. The machine is also capable of removing rust, paint, resin, oil, dirt, and oxide layers from surfaces. Key Advantages: - 4-in-1 functionality: welding / cleaning / cutting / weld seam cleaning - Raycus 3000W fiber laser source - Handheld laser head for welding and cleaning - 10 m standard optical fiber length (up to 15 m maximum) - Intelligent touchscreen control system - Multi-language user interface - Industrial chiller-based water cooling - Red-light positioning feature - Automatic wire feeder - Supplied with safety glasses, working lens, standard accessories, and a spool of welding wire Technical Specifications: ----- Model: LCW 3000W Nlodpjyr D A Ejfx Af Ssg Laser Type: Raycus Fiber Laser Laser Power: 3000 W Operating Voltage: 380 V Wavelength: 1064 nm Fiber Length: 10 m standard, up to 15 m maximum Welding Speed: 30–120 mm/s Cooling System: Industrial water chiller Ambient Operating Temperature: 15–35 °C Recommended Welding Thickness: 0.5–3 mm Cleaning Width: 0–80 mm Focal Length / Working Distance: 600 mm Applications The machine is suitable for: - Iron - Stainless steel - Aluminum alloys - Other metals Typical uses include: - Welding sheet metal and profiles - Pre-processing surface cleaning - Removal of rust, paint, oil, and oxides - Final weld seam cleaning Scope of Supply LCW 3000W machine complete with: - Handheld laser head - Automatic wire feeder - Laser safety glasses - Additional working lens - Spool of welding wire - Complete set of standard spare parts and accessories

Year of construction: 2025, condition: new, For sale: New buffer hopper with a loading grate equipped with a removable deagglomeration screen Nlsdjw Tc Txopfx Af Seg

Condition: like new (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2025, warranty duration: 12 months, input frequency: 50 Hz, Useful printing format: 150x300. Frame lifting parallel to the printing plane. Printing plane adjustable on all three axes. Lift-O-Mat (device for progressive frame release), continuously adjustable from the operator side. Printing stroke adjustment via magnetic microswitches. Printing speed and ink return adjustable continuously and independently. Extremely uniform squeegee advance in the transverse direction, even at high speeds. Micrometric adjustment of the squeegee and blade pressure. Nsdpfx Ajzqf D Tjf Selg Squeegee tilt adjustment. Two operating cycles: single and pulsed, for setup. Printing plane with a honeycomb structure and anodized aluminum coating. Printing plane equipped with a vacuum device with pre-vacuum and blow functions. Quick removal of the squeegee and blade. Pneumatic frame locking system.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0710, power: 51 kW (69.34 HP), type of input current: three-phase, sieve perforation: 20 mm, input voltage: 380 V, Robust industrial CSB wood shredder, Woody K45 type, manufactured in 2015. Equipped with a hydraulic feed ram, discharge conveyor belt with a head pulley magnet, and discharge auger. Suitable for processing MDF, chipboard, solid wood, pallets, and various wood waste streams. ✅ Heavy-duty industrial design ✅ Hydraulic push ram for consistent feed ✅ Magnet roller for automatic removal of metal contaminants Nlsdpfjz Dibasx Af Sog ✅ Complete line with conveyor belt and discharge auger ✅ PLC-controlled operation ✅ CE-compliant machine

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Njdezt Dmropfx Af Sslg Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, MG MORI DMC 1150 V Year of manufacture: 2020 Machine type: CNC vertical machining center Travel distances X-axis: 1,150 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 42 m/min Direct linear scales in X / Y / Z Work table Table size: 1,460 × 750 mm CNC control HEIDENHAIN TNC 640 3D control DMG MORI ERGOline Control 19" screen Main spindle DMG MORI speedMASTER Tool interface: HSK-A63 Speed range: 20–20,000 rpm Spindle power: 35 kW / 25 kW Torque: 130 Nm / 86 Nm Values specified at 40 % / 100 % duty cycle Active spindle cooling Tool magazine 60 tool positions Nlodpfx Aszzm Dpef Seg HSK-A63 Chain magazine Carousel Dual gripper Direct manual tool loading into the magazine Coolant / MQL Internal coolant supply Coolant through the spindle MQL 40 bar Paper band filter Tank capacity: 600 liters Chip conveyor Machine bed flushing Extended machine bed flushing Additional flushing bar on the right side wall Flushing volume manually adjustable Flushing gun for chip removal Enclosure roof Workpiece measurement technology Infrared measuring probe HEIDENHAIN TS 460 Automation DMG MORI PH 150 Pallet loading and unloading system Handling system with pallet magazine Round magazine 2 servo axes: X-axis Magazine table Z-axis pneumatic Gripping arm / fork IPC with touch panel DMG Automation Jobmanager OMRON package Graphically supported operator guidance PROFIBUS interface Automatic loading door on the right side of the machine PROFIBUS communication during the loading cycle 2-channel safety circuits Electrical automation interface version 4.0 4-color signal light Pallet system PH 150 basic round magazine: 10-position System expanded to pallet size: 500 × 500 mm In this configuration: max. 4 pallet storage locations Handling weight expanded to max. 250 kg per pallet incl. load EROWA zero-point clamping system EROWA UPC pneumatic zero-point clamping system Connection coupling on the table 2 active pneumatic lines Pneumatic release via 6 bar system pressure Pressure increase to 7.5 bar EROWA MTS clamping system Zero-point clamping station EROWA MTS Adapter plate: 410 × 410 mm 4 clamping elements Pitch: 250 × 250 mm Pallets 4 × EROWA MTS pallets Pallet size: 498 × 498 mm Pitch: 250 mm Incl. clamping studs and coupling Surface smooth Material: Aluminum The complete photo gallery is provided exclusively upon request. A sale to dealers is currently not possible. The complete order confirmation via DMG MORI will also be sent to you upon request.

Condition: used, mileage: 110,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 11/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW T6 L2 long wheelbase, 4Motion / all-wheel drive with differential lock, 110 kW, with high-quality equipment, ideal for tradespeople. All-wheel drive (4Motion, 4M, 4x4, 4WD) with mechanical differential lock (switchable) Underride protection for engine/transmission made of aluminum Trailer hitch with 2.5 t towing capacity, removable Mounting rails for roof rack Auxiliary heater, air (outlet B-pillar, lower right), programmable Climatic air conditioning with pollen filter Comfort driver and passenger seat with armrests on both sides, foldable, adjustable: - Seat height, backrest, lumbar support Seat cover fabric Simora Driving assistance systems: - PDC Park Distance Control front and rear, optical and acoustic display - Rear view camera - Cruise control - Hill start assist - Fatigue detection - Trailer stabilization - Brake assistant (HBA) - Multi-collision brake - ABS, ASR, ESP Light and Visibility Package - Automatic headlights - Automatic windshield wipers - Automatically dimming interior mirror Audio-navigation system Discover Media (touchscreen color display) - Radio, CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free kit for mobile phone with Bluetooth - Mobile Online Services Car-Net - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Multi-function display Plus / trip computer Airbag package: - Front airbags - Side airbags in the seats - Head airbags in the B-pillar Nedpfxjz Dir Se Af Selg Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control 12 V socket front (2x) Spare wheel and jack Fog lights with cornering light 2nd battery with separation relay Wheelbase 3400 mm Sliding door, cargo area with tinted glass Rear door with tinted glass, heated, with windshield wiper Commercial vehicle registration N1 / van Chassis 17" Engine 2.0 L - 110 kW TDI 6-speed manual transmission Steering wheel adjustable Non-smoker package Handles on A-pillars Heat-insulating glazing Heated windshield washer nozzles Cargo area equipment: Workshop fitting by Aluca (similar to Bott, Sortimo, Würth). Left side: shelving system with long storage compartment, storage compartments, cabinet section and 6 drawers. Right side: shelving system with storage compartments, storage compartment, 4 drawers and 4 aluminum tool/small parts cases. Fold-out workbench. Cargo area partition with window, upholstered in the driver's cabin (noise reduction). Robust wooden floor. Cargo securing with lashing eyes and mounting rails. Ceiling upholstered. Ventilation. LED lighting. Cargo area dimensions: - Length bottom: approx. 282 cm - Length middle: approx. 271 cm - Length top: approx. 261 cm - Height: 134 cm Service history from VW: 02.2021 / 27,787 km oil change 07.2021 / 38,350 km inspection + action S546 crit. 02 12.2022 / 71,422 km Insp. + oil change + Haldex clutch oil change 02.2024 / 97,192 km inspection 03.2025 / 99,112 km inspection + oil change + brake fluid 11.2025 / 112,439 km Haldex clutch oil change + air filter Inspection due Mounted tires: Winter tires 215/65 R 16 on steel rims with approx. 6 mm tread depth front and approx. 8 mm rear Additional tires: Summer tires 205/65 R 16 on steel rims with approx. 4/4/5/5 mm tread depth Despite careful processing, input and data transmission errors may occur in the vehicle description including pictures. Errors and prior sale are reserved. The vehicle can be inspected

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning, including intensive and large-scale projects. The main advantage of this unit is its minimal reliance on new-generation electronics. It is one of the most powerful machines available on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, Complete with the Following Equipment: - COLD JET AERO 75 DX DRY ICE (only 12 operating hours) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Nedswg R Edjpfx Af Solg One of the best machines worldwide. No electronics inside, making it highly reliable and affordable to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold include a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. New Cold Jet machines are also available through us. Contact us for more details. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: refurbished (used), operating hours: 50 h, functionality: fully functional, ASCO C500 dry ice pelletizer, completely overhauled, including the electric motor. The most reliable industrial dry ice pelletizer without complex electronics. The ASCO C500 is globally recognized as one of the most powerful and reliable dry ice pelletizers ever built by ASCO. Thanks to its simple and robust technology, this machine operates largely without complicated electronics. This minimizes malfunctions and makes maintenance and repairs easy to perform. The machine has been recently serviced, is in good condition, and is ready for immediate use. Technical specifications: Brand: ASCO Type: C500 Production capacity: up to 180 kg of dry ice per hour Nljdjzqu Twopfx Af Sjg Standard pellet size: 3 mm Other sizes available at an additional cost: • 1.7 mm • 10 mm • 16 mm Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, maximum load weight: 35,040 kg, overall weight: 45,500 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 04/2027, loading space length: 16,270 mm, loading space width: 2,550 mm, loading space height: 855 mm, total length: 16,560 mm, total width: 2,550 mm, total height: 855 mm, Year of construction: 2022, Equipment: ABS, 3-axle low-bed trailer GOLDHOFER Stepstar with TELESCOPIC EXTENSION First registration 04/2022, from first owner!! Saddle load up to max. 18,000 kg Permissible total weight (technical) 45,500 kg Length of gooseneck 3,700 mm Length of low-bed 9,300 mm + telescopic extension 3,340 mm = 12,640 mm Loading height 855 mm (-60/ +140 mm) Second loading height 895 mm (-100/+100 mm) Vehicle width 2,550 mm Excavator well length (L x W x H) 3,850 x 760 x 310 mm Wheelbase 2,250 and 1,410 mm 1-piece mechanical aluminum ramps with spring support, load capacity 24,000 kg, length 2,500 mm, width 450 mm Slider design for easy installation and removal of the ramps 1 pair of fixed wheel recesses in front of the first axle, 390 mm deep, incl. climbing strips in the slope 1 pair of fixed wheel recesses between the first and second axles, 390 mm deep, incl. climbing strips in the slope Aluminum wheel recess covers "Premium", full width 600 mm, extendable to 3,000 mm with 8,000 kg axle load Different wheel recess depths by using the wheel recess covers (depth approx. 390 and 260 mm) Angled vehicle rear end 8° over a length of 550 mm Downpipe outlet at the vehicle rear Frame finishing with corrosion-resistant zinc dust primer + cavity sealing BPW axles ECO Max Drum brakes 1st axle LIFT AXLE 3rd axle trailing steering KNORR trailer EBS with RSS driving stability control KNORR trailer information module Lighting completely LED 1 pair of additional reversing lights at the rear Load securing, gooseneck: Nljdozz Uncjpfx Af Sjg 3 pairs of lashing rings 5,000 kg 2 pairs of side rail pockets Load securing, low-bed: 1 pair of lashing points 10,000 kg in the center of the loading area behind the gooseneck 1 pair of lashing points 10,000 kg in the center of the rear area 6 pairs of lashing points 10,000 kg in the outer frame 6 pairs of side rail pockets in the outer frame Condition 1A, very well maintained RENTING is the new BUYING; with us, it is also available immediately in a full-service rental agreement.

Condition: used, Year of construction: 1996, Colour: Green Empty weight: 4.500 kg Dimensions (LxBxH): 475 x 180 x 200 cm Price: On request Double-sided planer REX HOMS 630 Serial No. 16831 380V, 102.6Amp 67.5HP Nsdpfx Aswng Ikof Solg Equipped with 3 planing shafts 1st under 15kW 2nd under 11kW 3rd above 18.5kW Max planing width 630mm Min-max planing height 10-310mm Max chip removal upper planing shaft 15mm Max chip removal lower planing shaft 10mm - Year: 1996 - Documentation available: No - CE certificate present: No - Max. working width: 630 - Max. working height: 300 - Knife type: Standard - Number of knives per cutterhead [pcs.]: 4 - Number of cylinders height adjustment: 4 - Height adjustment type: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 22 - Voltage [V]: 400 - Current consumption [A]: 103 - Power [kW]: 67.5 - Transport dimensions: 4750mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. * Splash guard: made of PVC in front of and behind the axles according to EC Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Headboard * Removable from 25 mm side wall Lighting system * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Nlsdjz Dmn Dopfx Af Sog Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes

Condition: used, mileage: 220,029 km, power: 100 kW (135.96 HP), first registration: 04/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 3,230 mm, loading space width: 1,910 mm, loading space height: 1,930 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), !!!!! WITHOUT REFRIGERATION UNIT !!!!! REFRIGERATION SYSTEM HAS BEEN REMOVED !!!!! !!! INSULATED BODY !!! BODY SHOWS VARIOUS SIGNS OF WEAR !!!!! Nedpfoywc H Uex Af Sjlg 3-seater, automatic transmission, tachometer, power steering, electric windows, on-board computer, electric exterior mirrors, center armrest, twin tires, cruise control, air conditioning, rear wing doors, side door/right, side protection, etc. Errors and prior sale excepted. Typographical errors possible. For sale only to commercial businesses and for export. !!!! Fg-8114 !!!! Key number 132 !!!!! Test drive/inspection possible at TÜV, DEKRA, or Iveco !!!!! New TÜV inspection available upon request !!!!!

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm Nedpfx Afoz Df Txo Sjlg workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Year of construction: 2021, condition: ready for operation (used), The GatheRex™ Cell Harvest Pump is a liquid handling device designed to work with closed system cell culture devices. The GatheRex connects to closed system devices and uses a low pressure forced air mechanism to remove media, concentrate cells and minimize storage and/or downstream processing. An internal air pump pressurizes the system by pumping air through the sterile vent filter on the cell culture device. When pressurized, excess media, or a cell fraction, is forced out of the device through the tubing assembly then into a collection receptacle. Model 80000Z is designated by black ID tags on the tubing pinch clamps. This version is compatible with large diameter tubing (0.375” OD) for media removal and small diameter tubing (0.160” OD blood transfer bag style) for cell recovery. ELECTRICAL REQUIREMENTS 1. Input: 100-240VAC, ~1.3A, 50-60Hz, Single Phase Fuse Type: 5ET 3.15-R, Cartridge, Time Delay, 3.15A, 250 V, 5mm x 20mm (0.2” x 0.79”), 5ET Series Detachable Power Cord: C13, 18AWG, 10A minimum, Grounded (3 Prong), UL 62, CSA-C22.2 No. 49 IEC / UL: 61010-1 edition 3.1 and 61326-1:2012 LOW PRESSURE OUTPUT 1. Gauge Pressure: 120 – 180 mmHg (2.32 – 3.48 psi) No adjustments for altitude are needed. 2. Flow Rate: Minimum 5 mL/sec fluid transfer rate from G-Rex M-CS Nledpfx Afsz Dx Sue Ssg ENVIRONMENTAL CONDITIONS 1. Temperature: 15°C to 35°C (59-95°F) 2. Humidity: ≤ 95% Relative Humidity 3. Altitude: < 2,000 meters (6,561 feet) Good working condition. Please check out our other listings as well.

Condition: new, SANY SY500 Heavy-Duty Ripper Attachment Galen Group manufactures heavy-duty ripper attachments for the SANY SY500 excavator and other large excavator models. Designed for demanding excavation and ground-breaking applications, the ripper helps penetrate hard, compacted and rocky materials before loading or removal. Its reinforced construction is suitable for intensive use in mining, quarrying, construction, roadwork and earthmoving projects. Key Features: • Manufactured for the SANY SY500 excavator • Heavy-duty reinforced construction • Designed for hard soil, compacted ground and rocky material • High penetration performance • Machine-specific connection dimensions • Replaceable wear components • Custom designs available according to the application • Manufactured in Turkey by Galen Group Nledpfoz Dpdhox Af Sog The attachment connection, geometry and reinforcement structure are manufactured according to the excavator specifications and the customer’s working conditions. We manufacture excavator rippers, rock buckets, heavy-duty buckets, mining buckets, long-reach boom-arm sets and other custom excavator attachments. Please contact us for pricing, production time and technical details. SEO Keywords: SANY SY500 ripper, SANY excavator ripper, excavator ripper attachment, heavy-duty ripper, rock ripper, single-shank ripper, mining excavator attachment, quarry excavator attachment, ground-breaking attachment, SANY SY500 attachment, excavator attachments manufacturer, ripper manufacturer, Galen Group, excavator attachments Turkey

Condition: like new (used), functionality: fully functional, mileage: 34,000 km, first registration: 09/2026, color: black, axle configuration: 2 axles, Year of construction: 2010, operating hours: 1,000 h, I am offering for sale a Chevrolet Corvette C6 6.2 V8, manufactured in 2010, imported as a new vehicle from the USA. The vehicle is owned by its first owner. Mileage: approximately 34,000 km – see one of the photos. ⚙️ Technical specifications: Engine: 6.2L V8 LS3 Power: approx. 430–436 hp (322–325 kW) Torque: approx. 575 Nm Drive: rear-wheel drive (RWD) Transmission: 6-speed manual / automatic (depending on the specific version) Acceleration 0–100 km/h: approx. 4.3 s Top speed: approx. 300 km/h Body style: coupe / targa (removable roof) 🧰 Standard equipment of the Corvette C6: Leather interior Sports seats Head-up display (HUD) Automatic climate control Electric windows and mirrors Cruise control Bose audio system (depending on the equipment) Sports suspension from the factory Xenon headlights 18"/19" OEM wheels (original) Electronic stability control (traction control) ⚙️ VETTEPOINT garage modification – ZR1 styling + performance The vehicle has undergone a professional modification involving the replacement of OEM parts with Z06 and custom components: Corvette Z06 suspension components ZR1 brakes and wheels ZR1 widened fenders Custom hood Rear wing with adjustable downforce Sports open exhaust + modified intake Lowered sports suspension 📦 Original parts for the vehicle: All original OEM parts are included in the sale: Body panels Wheels Exhaust and intake system Hubs, wheel carriers, shock absorbers 🏁 Vehicle characteristics: Visually styled like a ZR1 / track build Never used for track days or racing Used only on public roads Very attractive and clean condition 💥 Impression and driving experience: Brutal atmospheric V8 character Distinctive sporty sound High grip and stability (ZR1 components) Pure analog sporty feel Strong visual and mechanical impression 🛠️ Origin and service: Imported from the USA as a new vehicle Autooutlet – regular service Owner in the Czech Republic Long-term, carefully maintained vehicle Nedpfsz Dwc Ejx Af Solg 💡 Summary: An exceptional Corvette C6 6.2 V8 in ZR1 style, combining OEM quality with performance upgrades. Includes a complete set of original parts to revert the vehicle to its original condition. Inspection, starting, and test drives are possible in Slavkov u Brna, Czech Republic. Vehicle with VAT deductible.

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), overall weight: 3,500 kg, fuel type: diesel, color: orange, fuel: diesel, gearing type: hydrostat, Year of construction: 2023, operating hours: 139 h, Equipment: air conditioning, all wheel drive, HOLDER C65 SC Municipal utility vehicle with winter service equipment Accessories: 1. KUGELMANN VS150/74 Vario wedge snowplow with a maximum clearing width of 150 cm 2. KUGELMANN Duplex salt spreader with control panel This HOLDER C65 SC utility vehicle was first commissioned at the end of 2023 and has only 139 operating hours according to the meter. It is in very good overall condition with only minor signs of wear. Service recently performed. - Net price €71,344 // Gross price €84,900 - Inspection/test drive is possible - Shipping can be arranged nationwide; the costs depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you! Nlodoz Dwbhepfx Af Sog

Condition: used, Year of construction: 1972, Max. pulling force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Throat depth: 470 mm Distance between die positions: 125 mm Nodecdtnhopfx Af Solg Table: 400 x 400 mm Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Condition: used, operating hours: 130 h, functionality: fully functional, power: 8.09 kW (11.00 HP), first registration: 12/2011, fuel: diesel, driver cabin: day cab, Equipment: all wheel drive, car registration, Park Ranger 2150 Nilfisk Egholm Park Ranger 2150 - Used Unit Year of Manufacture Base Unit: 2011 Cab: 2015 Operating Hours: 129 Technical Data - Base Unit Length mm 2225 Width mm 1015 Height with / without cab mm 1935 / 1210 Weight with / without cab 1) kg 670 / 560 Payload kg 630 / 740 Permissible Total Weight kg 1300 Engine: Perkins Diesel 403J-11 HP / kW 26 / 19 Four-wheel drive: Standard Drive System: Hydrostatic drive. Completely hydraulic operated machine carrier: requires minimal maintenance. Performance: Turning radius - curb to curb mm 3000 Turning radius - inside mm 1100 Working speed, max. km/h 16 Articulated Steering Quick-change system for all attachments Trailer hitch Liquid wax coating 12-Volt socket: For mobile phone charger Attachments Front sweeper (summer) with 3 side brushes from 2015 Nsdpfx Aszf Ezbef Selg Height adjustment: The front wheel on the brush unit adjusts the optimum sweeping height while minimizing brush wear. Weight: 91 Kg Brush rotation speed: Infinitely adjustable. Dimensions Length mm 2900 Width mm 1200 Height with mounted hand suction hose mm 2200 Dimensions when parked Length mm 1350 Width mm 1010 Height mm 1920 Working width - 2 brushes: 1220 mm Working width to the 3rd brush: 1660 mm Hand suction hose: 6 meters Sweeper hopper from 2015 Net capacity: 438 liters Gross capacity of the sweeper hopper: 458 liters Sweeper hopper payload, max: 300 Kg Tipping height: 1300 mm Weight: 131 Kg Capacity of the fresh water tank: 100 liters Front sweeper (winter) from 2011 Dimensions Length: 3020 mm Width: 1220 mm Height with cab: 1935 mm Dimensions when parked Length: 900 mm Width: 1220 mm Height: 650 mm Weight: 101 Kg Performance Clearing width, straight position: 1220 mm Clearing width - 25°: 1140 mm Ground clearance under the brush: 420 mm Brush diameter: 550 mm Working speed: 1-10 km/h Theoretical sweeping performance: 12200 m2/h Clears snow depths of up to: 150 mm Brush rotation speed rpm 255 Swivel angle 25° Salt and grit spreader from 2011 Durable material: All parts in contact with salt and grit are made of corrosion-resistant plastic or stainless steel. Extra spreading material: Additional bags of salt and grit can be stored on the grid of the spreader hopper until the total weight is reached. This allows you to refill on the go. Support: This is used for quick and tool-free installation and removal, as well as for storage when not in use. Installation and removal are tool-free and easy on the back. Cover: Protects the spreading material from moisture. Dimensions Length: 2510 mm Width: 1015 mm Dimensions when parked Length with support: 1175 mm Width: 800 mm Height with support: 1350 mm Weights Weight with cab: 860 Kg Payload with cab: 440 Kg Weight (salt and grit spreader): 97 Kg Spreader Volume: 210 liters Spreader payload, max: 350 Kg Loading height: 1250 mm Performance Spreading width: 1000-5000 mm Operating speed: 1-16 km/h Subject to changes, printing errors, and prior sale. All information is provided without warranty. Sale is made excluding any guarantee or warranty.

Condition: used, Year of construction: 2010, operating hours: 66,000 h, machine/vehicle number: PR23, Used NEGRI BOSSI 800T injection molding machine - year 2010Technical Specifications & Performance DataThis Negri Bossi VECTOR 800T injection molding machine delivers high-output performance for large-format plastic parts and packaging components. As a second hand industrial machine from 2010, it combines robust mechanical design with generous mold space and powerful injection characteristics, ideal for heavy-duty applications and supporting upstream production for industrial packaging and beverage production accessories.Manufacturer: Negri BossiModel family / code: VECTOR 8000H8400 (V800 designation)Year: 2010Working hours: 66000Screw diameter: 110 mmShot volume: 5160 cm³Shot weight: 4700 gInjection pressure: 1620 barEjection stroke: 350 mmTie bar spacing (H x W): 950 x 1100 mmPlaten size (H x W): 1400 x 1550 mmOpening stroke: 1080 mmMold height (min–max): 400–1100 mmCore pull circuits: 4 (2+2)Air circuits: 4Robot interface: YesMachine dimensions (L x W x H): 10850 x 2600 x 2305 mmMachine weight: 38750 kgAdvanced Automation & Control SystemsThe VECTOR platform is engineered for reliable automation and process stability. This unit is equipped with a robot interface for seamless cell integration and features multiple core pulls for complex tooling strategies. The electrical screw motor option provides precise dosing control and energy-efficient plasticizing.Integrated robot interface for automated part removal and in-mold operations4 core pull circuits (2+2) to support advanced mold functions4 pneumatic air circuits for auxiliary tooling requirementsElectrical screw motor option for accurate dosing and repeatabilityProduction Line Integration CapabilitiesThis injection molding machine can operate as a standalone cell or integrate within a broader industrial packaging workflow. It is well-suited for producing large or multi-cavity parts used in packaging systems and can support upstream manufacturing for components associated with a used bottling line or beverage production environment.Inline or standalone operation with engineered robot interfaceAccommodates complex tooling and multi-cavity moldsCompatible with automated conveyors, part handling, and quality stationsSupports format changes through mold/tooling exchange and core pull configurationMachine Condition & Maintenance HistoryThis second hand Negri Bossi injection molding machine from 2010 shows 66000 operating hours. Presented in working condition and ready for operation, it is suitable for facilities seeking proven performance and reliable uptime within industrial packaging or component manufacturing.Operational status: Ready for ... Nedpfx Asziyy Tef Solg

Condition: used, mileage: 124,100 km, power: 88 kW (119.65 HP), first registration: 11/2021, fuel type: electric, empty load weight: 2,365 kg, maximum load weight: 1,135 kg, overall weight: 3,500 kg, tire size: 215/75R16, wheelbase: 3,450 mm, fuel: electricity, energy efficiency: A, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,420 mm, total width: 2,050 mm, total height: 2,580 mm, loading space length: 5,413 mm, loading space width: 2,050 mm, loading space height: 2,579 mm, Year of construction: 2021, front tire size: 215/75R16, rear tire size: 215/75R16, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, traction control, Driving assistance system: Hill start assist, Electronic parking aid, Automatic air conditioning, LED daytime running lights, Electr. adjustable and heatable, Brake assist, Electric front windows, Front fog lights, Adjustable steering column (steering wheel), Central locking with remote control, Wheelbase 3450 mm, Electronic immobilizer, Traction control system (ASR), Airbag on passenger side, Electronic stability program (ESP), Seats in cab: Double passenger seat, Seats in cab: Height-adjustable driver's seat, Speed limiter system, Tire repair kit, Tire pressure monitoring system, 6x16 steel rims, Adjustable head restraints, Driver's side airbag, Drive type: Front-wheel drive, Equipment package: Mopar Connect, E - Ducato package, Electric motor 90 kW (cont. 58 kW), Driving assistance system: Adaptive load control (LAC), Driving assistance system: Lane departure warning incl. Traffic sign recognition, Driving assistance system: Blind spot assistant, Color display above dashboard (charging indicator, E - Ducato), Transmission for electric vehicle, Rear wing doors (opening angle 260 / 270 degrees), Rear axle reinforced (suspension), HV battery 47 kWh, Infotainment system: Touchscreen, Navigation, DAB, Apple CarPlay and Android Auto, Body/bodywork: Box high compartment, charging cable with type 2 plug for high-voltage battery (mode 3), removable load compartment partition (without window), LED lighting load compartment, steering wheel and gear/selector lever handle in leather, reversing alarm acoustic (warning signal outside), headlight surround black, side protection strips, seats in cab: Driver's seat with armrest and lumbar support, Sun visor on the right with wide-angle mirror, Tele camera to the rear, Touchscreen color display (7 inch), USB port, Lightly tinted glazing, Lashing eyes load compartment floor (2) Note Despite careful checking of all our prices, errors can still creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! Nledpfovikqaox Af Sog - .

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, If desired, the tractor unit can also be sold separately. Mercedes Arocs 2546 6x4HAD (Vehicle number: 11765) Cab: L-cab StreamSpace, 2.30 m, tunnel 170 mm * Cab suspension, comfort, air-sprung * Cab rear wall, without window Njdpfxez Dzqtj Af Selg * Storage compartment exterior flap, left * Exterior sun visor, transparent * Air horn * Roof strobe light * Locking system, with central locking * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Rear view camera * Automatic climate control * Waste heat recovery system * Auxiliary water heater, cab * Electric auxiliary heater * Construction site filter * Storage compartment lid, driver and passenger side * Drawers, under bed & under console * Stowage flaps, above windshield * Lifting roof, electric * Refrigerator, in drawer, under bed ----Electrical and electronics: Additional socket 12 V/15 A, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, in side panel compartment, right * Additional functions, for body manufacturer * Trailer socket 24 V, 15-pin * Reverse warning system ----Safety and assistance systems: Stability control assistant * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assist * Active Brake Assist 4 * Airbag, driver * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High Performance Engine Brake * Air compressor, 2 cylinders * Insect screen, in front of cooler * Water pump, regulated ----Powertrain: Twin-plate clutch * Transmission G 281-12/14,93-1,0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: Leaf/air suspension * Tag axle, steered & liftable * Fifth wheel coupling with Doumatik ----Palfinger M10L80 crane on 2-axle semi-trailer: * 2 hydraulic supports * 4 adjustable timber stakes (ECCO ALU 4) * Elevated platform * Timber grapple * Year of manufacture: 2019 * Operating hours: 4459 hours * Next inspection: Technical data * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 510 liters * AdBlue tank: 60 liters * Technical gross vehicle weight: 26000 kg * Tare weight: 13630 kg * Permissible trailer load: 35000 kg * Overall length: 10200 mm * Next inspection due: 05.2026 -----Janzen System T19 tandem timber trailer (Vehicle number: 11676) * 4 adjustable timber stakes ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Overall length: 7650 mm * Permissible/technical gross vehicle weight: 18000/19000 kg * Tare weight: 2950 kg * Tire dimension: 385/65R22.5 * TÜV (German technical inspection): 11/2026 * Next inspection due: Vehicle number/Vehicle: 11675+1167----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transportation * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Efficient and precise cutting with high ease of operation thanks to the electromotive adjustment of the main saw blade (height/angle) and the parallel fence. Powerful motor, speed up to 5,000 rpm, scoring saw speed up to 8,000 rpm. Double roller carriage, the heart of the panel saw, smooth-running and durable. Cutting length max. 3,200 mm Safe operation thanks to proven safety devices. Equipment: Machine frame: Torsionally rigid and self-supporting guarantees the necessary smooth running and stability Control: PLC control Electromotive height adjustment and tilt 0-45° for the main and scoring saw blade via push and hold button. Saw unit: Powerful motors for excellent cutting performance Drive power/speed of the main saw spindle with automatic brake Main saw motor 7 kW, speed adjustment by switching over the drive belt, speeds 5,000 / 4,000 / 3,000 rpm Speed of the scoring saw 8,000 rpm Quick-change system for the main saw blade Saw blade angle is displayed numerically Double roller carriage: Linear, round guide rails ensure a precise and durable system with high-quality cutting results and a long service life Small rollers inside the carriage guarantee smooth sliding during cutting incl. upper carriage locking Carriage length 3,200 mm Parallel fence: max. width 1,250 mm with electromotive adjustment removable fence High-quality work table made of robust sheet steel guarantees high rigidity Nsdpsz Dwftefx Af Sslg Safety zone starts approx. 200 mm in front of the saw blade Crosscut fence: Cross position of the panel is displayed numerically with telescopic device for cuts up to 3,100 mm and 90° guarantee Robust, gap-free flap units are easy to move Fence ruler is removable Cutting to length on the crosscut fence on the sliding carriage 3 digital displays with fine adjustment for high repeatability Display up to max. 3,200 mm Extraction: to prevent flying chips and dust protects the operator from hazards Table extension and table widening Design: Clamping shoe, sliding stick, sliding and return handle Miter stop for manual mounting on the sliding carriage Technical data: Main saw: Saw blade diameter 400 mm, speed 3,000/4,000/5,000 rpm, motor 7 kW S1 Scoring saw: Saw blade diameter 120 mm, speed 8,000 rpm, motor 0.75 kW S1 Saw blade tilt 0-45° Max. cutting depth at 45°: 85 mm Max. cutting depth at 90°: 125 mm Parallel fence: max. 1,250 mm Sliding carriage: 3,200 x 418 mm Max. cutting capacity: 3,200 mm Height adjustment: electromotive Angle adjustment: electromotive Table size: 1,020 (690+720) mm Extraction: Diameter 100 mm Space requirement: 6,700 x 3,900 x 1,890 mm CE marking in accordance with EU directives including documentation and maintenance instructions Saw blades are not included in the scope of delivery.