Used Pinbone Remover for sale (4,302)

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, If desired, the tractor unit can also be sold separately. Mercedes Arocs 2546 6x4HAD (Vehicle number: 11765) Cab: L-cab StreamSpace, 2.30 m, tunnel 170 mm * Cab suspension, comfort, air-sprung * Cab rear wall, without window * Storage compartment exterior flap, left * Exterior sun visor, transparent * Air horn * Roof strobe light * Locking system, with central locking * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Rear view camera * Automatic climate control * Waste heat recovery system * Auxiliary water heater, cab * Electric auxiliary heater * Construction site filter Bdodpfx Ajz Dzqtemreh * Storage compartment lid, driver and passenger side * Drawers, under bed & under console * Stowage flaps, above windshield * Lifting roof, electric * Refrigerator, in drawer, under bed ----Electrical and electronics: Additional socket 12 V/15 A, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, in side panel compartment, right * Additional functions, for body manufacturer * Trailer socket 24 V, 15-pin * Reverse warning system ----Safety and assistance systems: Stability control assistant * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assist * Active Brake Assist 4 * Airbag, driver * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High Performance Engine Brake * Air compressor, 2 cylinders * Insect screen, in front of cooler * Water pump, regulated ----Powertrain: Twin-plate clutch * Transmission G 281-12/14,93-1,0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: Leaf/air suspension * Tag axle, steered & liftable * Fifth wheel coupling with Doumatik ----Palfinger M10L80 crane on 2-axle semi-trailer: * 2 hydraulic supports * 4 adjustable timber stakes (ECCO ALU 4) * Elevated platform * Timber grapple * Year of manufacture: 2019 * Operating hours: 4459 hours * Next inspection: Technical data * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 510 liters * AdBlue tank: 60 liters * Technical gross vehicle weight: 26000 kg * Tare weight: 13630 kg * Permissible trailer load: 35000 kg * Overall length: 10200 mm * Next inspection due: 05.2026 -----Janzen System T19 tandem timber trailer (Vehicle number: 11676) * 4 adjustable timber stakes ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Overall length: 7650 mm * Permissible/technical gross vehicle weight: 18000/19000 kg * Tare weight: 2950 kg * Tire dimension: 385/65R22.5 * TÜV (German technical inspection): 11/2026 * Next inspection due: Vehicle number/Vehicle: 11675+1167----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transportation * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: new, Year of construction: 2026, Vertical Bandsaw with Laser Guide A simple-to-use bandsaw with a durable construction. It allows for precise adjustment of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quickly removing the blade. Precise cast iron machine table. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Two cutting speeds selected via a stepped pulley. Technical Data: Wheel diameter [mm]: 480 Maximum cutting height [mm]: 280 Maximum cutting width [mm]: 465 Blade width [mm]: 9.5 to 38.1 Blade length [mm]: 3605 Belt speed (2 speeds) [m/s]: 7/14 Worktable angle adjustment [°]: from -10 to +45 Worktable dimensions (L x W) [mm]: 630 x 480 Dimensions (L x W x H) [mm]: 830 x 550 x 2070 Weight [kg]: 162 Motor power [kW]: s1-2.2kW, s6-3.1kW Power supply: 3-phase, 400V Bdodpfx Aovugwaemreh Note: The price quoted is the net price. It does not include transportation costs.

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2025, total length: 4,000 mm, total width: 2,000 mm, total height: 2,000 mm, input frequency: 50 Hz, control cabinet length: 400 mm, control cabinet height: 800 mm, Fully operational and currently in production. Machine can be inspected and tested with dough. 6 removable bowls included. The mixer is located in Romania, Arad County, Pâncota, at Nicola SABB Bakery, where it can be seen in operation. More details are available by phone or WhatsApp. Videos of the mixer in operation can also be provided upon request. Main Features • Mixing capacity: up to approx. 300 kg dough / 180–190 kg flour • Type: Double-spiral mixer with 6 removable bowls • Digital control panel with program management • Two mixing speeds: slow and fast • Manufactured in Germany (DIOSNA – Dierks & Söhne GmbH) Bdjdpfex Ta U Uex Amrsh • Very quiet and stable, equipped with safety cover sensor and automatic stop • Power supply: 400 V / 50 Hz / three-phase • Total power: 49 kW • Year of manufacture: 2009 Technical Condition Fully operational and currently in use for bread and bakery production. Owned and operated by our bakery since new (2009).

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Originates from a cleanroom manufacturing process, plastic granules. Industrial vacuum cleaner for compressible material. The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. • Reduces downtime through continuous cleaning • Compression and easy removal of the collected material Bsdew D Upzspfx Amrsdh • Dust removal from the work environment • Recycling of trimmings • Flexible due to different performance classes • Container sizes, maintenance-free • Simple monitoring • Unattended operation possible. Nilfisk industrial vacuum cleaner R104 V 4031600000 Article number: NILFISK-4031600000 R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Industrial vacuum cleaner for compressible material The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 814 kg, maximum load weight: 1,886 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 3-way tipper + enclosed leaf guard 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading area height: 66cm Total weight: 2700kg Payload: 1886kg braked tandem trailer overrun brake and parking brake from KNOTT 2x 1350kg axle with brake low chassis Bdsdpfxez Egkhj Amroh fully welded, hot-dip galvanized steel frame aluminum profile side boards with tension lock can be folded down and removed on all sides enclosed leaf guard 60cm made of hot-dip galvanized steel can also be opened and removed on all four sides 15mm thick, non-slip and robust screen-printed wood floor additional steel plate on wood floor automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force reinforced 13" C tires with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front lights at the rear with reversing light and triangular reflectors upper frame mounted on rubber large tipping angle of 51 degrees to the rear hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -Side board height increased to 35cm -Black Edition (powder-coated side boards and rims in black) -integrated loading ramps 2800kg -electric tipping control -charger -remote control -Bluetooth remote control -emergency hand pump in combination with electric control -safety support for maintenance work on the tipped vehicle -foldable crank for rear supports -complete LED lighting -theft protection -net with fine or coarse mesh -H-frame -leaf guard in various heights, also closed -additional side boards 30cm with tension lock -flat cover with or without railing -high cover 160cm or 180cm further accessories on request! plus. freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, heating capacity: 0 kW (0.00 HP), overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Maximum pressure: 500 bar 5200 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new Bdjdpfjz Ega Nsx Amreh For cold water only; heating element has been removed.

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space volume: 39 m³, loading space length: 6,050 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, tail-lift, Welcome to carmax24! Today, you have the opportunity to purchase one of our selected, inspected vehicles. Expertly inspected and high-quality vehicles ensure high customer satisfaction, and have done so since 2008. This is our daily approach, because you, as a customer, are our top priority at carmax24. Bedpfxoz Enc Eo Amredh IVECO 70C18 HA8, flatbed with side curtain and sleeper cab, with PALFINGER rear liftgate * Internal dimensions of the body: 6,050 × 2,480 × 2,600 mm * Two-part curtain-sided body with removable center posts for easier loading and unloading * PALFINGER rear liftgate Construction * Subframe made of hot-dip galvanized steel sheet and high-strength aluminum alloys (longitudinal/cross members 250/90 mm) * Preparation for mounting a CarPol sleeper cab * Preparation for mounting a PALFINGER hydraulic rear liftgate that can be slid under the body * Frame extension and extension of the wiring harness according to manufacturer's specifications Floor, walls, and securing devices * Front wall made of aluminum side board and waterproof plywood (up to 1.85 m high) * Floor made of 18 mm waterproof, non-slip screen-printed plywood * 14 tie-down points for cargo securing (7 per side) * Plastic fenders with splash guards * Lateral underrun protection * LED side marker lights Curtain / Side curtain / Roof * Sliding side curtains without side boards with horizontal tension straps * Gray curtain, secured by aluminum slats (5 rows), attached to the side support profile with buckles * White, independently movable sliding roof Rear * Rear closure with two-leaf aluminum doors * One recessed latch per door leaf Additional equipment * Auxiliary heater Autoterm * Tool box 60 l, 2 pieces (mounted in front of the rear axle) * Water tank * Additional battery 100 Ah in a separate battery box * Holder for pallet truck * Vehicle approval based on European type approval Exterior cab * Exterior mirrors on arms for vehicle width 2.55 m * FMS data interface Chassis * Increased permissible total weight (GVW) * Two-stage multi-leaf suspension at the rear (semi-elliptical) * AGM battery 105 Ah Engine / Electrical system * Alternator 12 V / 250 A * Alternator with constant charging current Interior * Additional adjustable speed limiter * Storage compartment above the windshield * Comfortable co-driver's seat with lumbar support adjustment * Suspended comfortable driver's seat * Rear wall without thermal insulation Comfort package * USB-A and USB-C ports for driver and passenger * Infotainment system NAVI MY IVECO with 7-inch display * Front fog lights * Heating and ventilation system with manual air conditioning * Cruise control * Air conditioning compressor 170 cm³ Style package * Full-LED headlights * Leather steering wheel * Emblems in gunmetal look * Radiator grille of the Daily series with chrome trim Our special service for you: * Maintained according to service schedule at authorized dealers and specialist workshops * Winter tires available at an extra charge * Extended warranty up to 36 months possible at an extra charge * We will gladly and fairly accept your used vehicle in trade! * Financing brokerage from 6.99% with and without down payment up to a maximum of 96 months, subject to credit approval * TÜV / DEKRA main and emission test * EU net sale possible - intra-community delivery with valid VAT ID number * Non-EU countries (

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ Bsdpfx Aoz Ea I Tsmrodh MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Condition: used, Year of construction: 2009, Liebherr Crane 160 HC-L 8/16 incl. remote control: 160 HC-L 8/16, height: 37.5 m, jib length 55 m, works number 30349039, year of manufacture: 2009 incl. the following crane parts: 1 cross-shaped undercarriage Bdsdpfxjz Edtts Amrsh 2 base ballast A 7.5 t 12 base ballast B 4.8 t 1 jib 611, 10.7 m 1 jib 621, 8 m 2 jibs 622, 10.35 m 1 jib 631, 5.18 m 1 jib 641, tip 1 base tower, 12.42 m 5 tower sections, 4.14 m "Completely refurbished, sandblasted and newly painted! This crane has been completely overhauled and is in excellent condition. Old layers of paint and rust were thoroughly removed by sandblasting before a high-quality new paint coating was applied. Subject to changes, errors and prior sale! You can find more vehicles on our website. Sales are exclusively subject to our general terms and conditions – see our homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal note: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, ABA precision surface grinding machine with accessories, machine used very little. Magnet size: 400x250 mm Infinitely adjustable grinding spindle Grinding wheel dressing device (Diaform) Automatic feed Feed rate infinitely adjustable Inch mode Coolant system with belt filter system Dust extraction for wheel dressing device Balancing device, centering arbor, Wheel removal device Tool cabinet with various new grinding wheels Operating manual. Bdodpfez Ehmdox Amreh

Condition: excellent (used), For sale is a used Record Power thickness planer with a planing length of 1110 mm. The machine has been inspected by our qualified technicians and is in very good condition. Bdjdpfx Amjz E Hx Eoroh Technical data: - Planing width 265 mm - Planing table length 1,110 mm - Stock removal per pass 3 mm - Planing fence, adjustable up to 45° - Cutterhead diameter 75 mm - Max. thickness 190 mm - Feed rate for thicknessing 5 m/min - Motor 1.7 kW / 2.3 HP / 230 V - Dust extraction port 100 mm - Weight 162 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Related terms: Planer, thicknesser, surface planer, planing, thicknessing Reference: R-M61I4

Condition: like new (used), functionality: fully functional, mileage: 35 km, power: 9 kW (12.24 HP), fuel type: electric, gearing type: automatic, axle configuration: 2 axles, maximum load weight: 1,500 kg, number of seats: 9, Year of construction: 2019, operating hours: 6 h, Equipment: disability-friendly, power assisted steering, tail-lift, wheelchair accessible, Electric shuttle bus suitable for wheelchair users, with a wheelchair ramp at the rear, or for parcel delivery. Can be used on public roads without registration. The wheelchair ramp can be removed. Bjdpfxez Ehbbe Amredh Large cargo capacity, both in cubic meters and weight. Long range due to a dual battery pack. This is a demonstration model with low mileage.

Condition: new, Year of construction: 2026, machine/vehicle number: ST-150, functionality: fully functional, pressing force: 150 t, stroke length: 450 mm, operating speed: 3 mm/s, reverse speed: 10 mm/s, table width: 1,500 mm, table length: 3,000 mm, table height: 750 mm, distance table to ram: 700 mm, total length: 3,000 mm, total width: 3,000 mm, total height: 2,750 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, MODEL ST-150 Capacity t 150 Motor power kW 4 Working speed mm/s 2.3 Approach speed mm/s 7.4 Return speed mm/s 10 Maximum pressure bar 305 Piston stroke – J mm 450 Lower table mm 1,500 x 3,000 Head travel – C mm 1,000 Bridge travel – D mm 2,500 Front opening – A mm 1,550 Vertical opening – B mm 700 Working height – E mm 750 Overall front dimension – G mm 3,000 Overall side dimension – H mm 3,000 Overall height – I mm 2,750 Bdsdpey E Iq Uofx Amroh Weight kg 5,000 STANDARD DESCRIPTION: We have designed motorized hydraulic presses with a movable frame and adjustable head from the ST series, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures and plates cut with oxy-fuel or laser. Its design facilitates the loading and unloading of large volumes: parts, plates, or structures. It allows access to different pressure points without the need to move the workpiece, thanks to the lateral displacement of the cylinder and the longitudinal movement of the frame. STRUCTURE AND TABLES: The ST series hydraulic presses consist of an electrowelded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. All of this guarantees our high standards of precision and quality. The longitudinal travel of the frame. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with lapped liner, chrome-plated piston, and maintenance-free wear-resistant guides. Cylinder actuation via a lever-operated hydraulic distributor. It is equipped with a removable wiper to prevent piston damage. Two-speed motorized hydraulic unit with automatic disengagement of the approach speed by hydraulic pressure and a relief valve. ELECTRICAL INSTALLATION AND SAFETY: Electrical installation equipped with a motor guard with emergency stop. Supplied with a glycerin-filled pressure gauge with reading in tons and hydraulic oil. Complies with and meets all essential safety and health requirements according to CE regulations. Supplied with an instruction manual.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 18166, pressing force: 38 t, total width: 2,500 mm, total length: 6,900 mm, total height: 2,500 mm, overall weight: 15,000 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,350 kg, input frequency: 50 Hz, input current: 32 A, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 20 P/E/L/W – 20 m³ | Double-sided cable & hook connection | Extra-large feed opening For sale: Avermann MPC 20 P/E/L/W compaction container, year of manufacture 2012, with a capacity of 20 m³. This robust Avermann compaction container stands out due to its very large feed opening – the largest in its class. This allows larger and bulkier waste streams to be easily and quickly fed into the container. The feed opening is equipped with two separate lids that can be opened sideways, ensuring that the opening remains easily accessible and the machine can be used flexibly. In addition, this compaction container can be connected on both sides and is suitable for both cable and hook connections. This makes the machine particularly practical when different transport and removal systems are used. The machine is heavy-duty and suitable for professional use in various sectors, including industry, logistics, manufacturing, distribution, recycling, and waste processing. Technical specifications: Brand: Avermann Type: MPC 20 P/E/L/W Year of manufacture: 2012 Serial number: 18166 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Max. working pressure: 200 bar Own weight: approx. 5,350 kg Permissible total weight: 15,000 kg Double-sided connection Suitable for both cable and hook connections Two sideways-opening lids on the feed opening Very large feed opening – the largest in its class Special features: Thanks to the very spacious feed opening, this compaction container is ideally suited for feeding in larger quantities and bulky materials. The two separate, sideways-opening lids ensure that the feed opening can be easily made fully accessible. Bsdpfxjz Ep R Do Amrjdh The combination of double-sided connection and both cable and hook connections also makes this machine particularly flexible for transport and emptying. The machine is in used condition and shows signs of wear and tear, as can be seen in the photos. Technically, it is a well-built, industrial Avermann compaction container with a generous capacity of 20 m³. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price, or technical questions. Keywords: Avermann, AVOS, MPC20, MPC 20, MPC 20 P/E/L/W, 20m3 compaction container, compaction container, waste compactor, container compactor, double-sided connection, cable connection, hook connection, removal compactor, waste compaction, recycling, compactor, large feed opening.

Condition: new, Equipment: dust extraction, For all industrial processes where dust and coarse particles are generated, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly effective filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and conveyed through a suction line to the inlet of the AL-KO CLEAN UNIT D. In a generously dimensioned pre-separation chamber, coarse particles are separated. The downstream filter cartridges of dust class 'M' filter out the remaining fine dust particles. The differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during continuous operation. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent suction power and a long filter service life. The collected dust is gathered in an easily maneuverable container with an integrated collection bag, enabling low-dust disposal. The purified air is returned to the workspace via the top of the unit. Bdedswwkrfspfx Amroh Applications: - Direct extraction of dust and chips - Suitable for single or multiple workstations - For connection to machines, extraction tables, booths, and ducting - For metal and plastics processing and many other industries - For grinding, polishing, filling processes, and more Advantages: - High suction performance due to an efficient fan and cleanable filters with a long service life - Suitable for a wide range of applications - Extremely quiet thanks to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, planing width: 530 mm, tool diameter: 125 mm, number of blades: 87, rotational speed (max.): 4,700 rpm, total length of planing tables: 2,900 mm, total width: 1,380 mm, total height: 850 mm, overall weight: 800 kg, Equipment: CE marking, Surface planer DMA with spiral cutterhead, 3 rows, 87 indexable inserts, insert dimensions 15x15x2.5mm. Infeed table 1625mm, outfeed table 1230mm, cutterhead diameter 125mm, cutterhead speed 4700 rpm. Working height 850mm. Robust fence, adjustable in depth and swiveling 90°-45°, inclination is easily readable from the front, thanks to round bar guidance and additional roller bearings, allowing for smooth adjustment. Fence dimensions 1300x170mm. Dust extraction port diameter 160mm, maximum chip removal 8mm. Bdodoz Eyp Rjpfx Amroh Swiveling control panel located at eye level on top. Chip removal adjustment via scale with manual setting. Stable steel-gray cast iron construction guarantees precision and durability. The machine is run-in before delivery.

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. Bdjdpsxrpkmofx Amroh USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,204 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 2,220 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 28 X 12,5 - 15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,400 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, COMBILIFT C5000XL | DUPLEX 4500 MM | FORK POSITIONER | FREE LIFT | FULLY HEATED CABIN | READY TO WORK 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🛞 BRAND NEW TIRES | 🚛 EUROPEAN & WORLDWIDE DELIVERY Are you looking for a reliable multidirectional forklift that is ready to work from day one without any additional servicing costs? We offer a professionally prepared COMBILIFT C5000XL, fully serviced, tested, and ready for immediate operation in timber yards, steel companies, production facilities, and logistics centers. ⭐ KEY ADVANTAGES ✓ Full service before sale ✓ Warranty included ✓ Brand new super elastic tires ✓ Very good technical and visual condition ✓ Ready to work without additional investment ✓ Live online video inspection available ✓ Direct delivery to your company 📋 TECHNICAL SPECIFICATION Manufacturer: COMBILIFT Model: C5000XL Year: 2015 Capacity: 5000 kg Engine: LPG Bdjdpfx Amsz E H A Djreh Operating hours: 4024 h Mast: DUPLEX Lift height: 4500 mm Free lift: 2220 mm Fork positioner: 1360 mm Fork length: 1200 mm Cabin: Full and heated Operating weight: 7200 kg 📐 DIMENSIONS Height: 2600 mm Length: 2500 mm Width: 2400 mm Overall height: 3150 mm 🛞 TIRES Front: 23 X 10 - 12 SE Rear: 28 X 12.5 - 15 SE Condition: 100% BRAND NEW super elastic tires ⚙️ EQUIPMENT ✓ Fork positioner ✓ Fully heated cabin ✓ Free lift ✓ Working lights ✓ Warning beacon 🔧 PROFESSIONAL PREPARATION Each machine is professionally prepared by our technical department before delivery. ✓ Complete technical inspection ✓ Full service, including oils and filters ✓ Removal of identified leaks ✓ Operational and safety testing ✓ Load testing ✓ Final inspection before delivery The forklift is in very good technical and visual condition and is ready for immediate operation. 🏭 IDEAL FOR ✓ Timber and wood industry ✓ Steel mills and steel stockholders ✓ Steel structure manufacturers ✓ Pipes, profiles, and long loads ✓ Indoor and outdoor operation 🛡️ WARRANTY The machine is supplied with a warranty. Our technical team also provides professional after-sales support. 🚛 TRANSPORT We organize professional transport throughout Europe and worldwide. We can deliver the forklift directly to your company and handle the complete transport and export process. 🌍 WHY FT LOGISTICS? FT LOGISTICS specializes in sideloaders, multidirectional forklifts, and specialist warehouse equipment. ✓ More than 100 machines available in stock ✓ Full service before delivery ✓ Warranty ✓ Professional technical advice ✓ Leasing and financing ✓ European and worldwide transport ✓ Export and customs documentation ✓ After-sales support 📹 LIVE VIDEO INSPECTION We can arrange a live WhatsApp video presentation so you can inspect the machine remotely before purchase. Additional photos, videos, and an individual transport quotation are available upon request. FT LOGISTICS READY TO WORK. READY FOR DELIVERY.

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin * Quick-change system * Bucket * Fork * Rotating beacon ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM Bedpfx Aez E Uhuemrsdh

Condition: used, Year of construction: 2016, operating hours: 3,454 h, Equipment: all wheel drive, * enclosed cab * quick-change coupling Bsdpfjz E Uilsx Amrodh * bucket * forks * rotating beacon ----Vehicle number: 12487----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transportation. ?YOUR VTS TEAM

Condition: used, -Fuel delivery system -Biomass combustion system -Hot water boiler -Ash removal system -Flue gases primary cleaning system -Stairs and service platforms -Draft fan - Automatic control system -Chimney -Circulation system and water treatment Main parameters and guarantee value are calculated according to fuel parameters: Bedpfx Aowfpwpemrsdh -Moisture 60-65 % -Ash till 8 % - Calorific value 7990 kJ/kg and 1907 kcal/kg Main parameters of the furnace 6000 K: - Maximal designed thermal output – 6.5 Mw - Maximum continuous rate – 6 MW - Furnace regulation range 20% - 100% - Volume of furnace- 31.6 m3 - Volume of combustion chamber – 24m3 - Grates area 12 m2 - Grates designed thermal load – 500 Kw/m2 - Combustion chamber designed thermal load – 250 Kw/m3 - Maximum temperature in the combustion chamber - 900°C The following kinds of biomass are accepted for combustion in the furnace: - wood chips – 100% - forest wood residues- 100% - saw dust – 100% (G15) - chunk peat – 100% - bark – 100%

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. Bdjdpfjz E S Ilsx Amrsh 1. Hydraulic beam cutting press Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: excellent (used), Year of construction: 2018, lifting height: 1,620 mm, free lift: 400 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,340 mm, color: other, GVW: 347 kg Bedpfx Asz E Rbkjmredh Lifting capacity: 1.000 kg MANUAL STACKER! Movable forks! Battery 12V 80Ah 2025 GEL 2025, Built-in 220V charger, LOW WEIGHT, Removable forks, Adjustable legs, Moving manual, Electric lifting, Single fork wheels,

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng DHZ360 self-cleaning disc stack centrifuge / separator. Manufacturer: Juneng Model: DHZ360 Type: disc stack centrifuge / centrifugal separator Condition: new / unused Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Slovakia / EU can be arranged The Juneng DHZ360 is an automatic disc stack centrifuge designed for high-speed centrifugal separation of liquids and fine solids. The machine is equipped with automatic cleaning and solids / sludge discharge, making it suitable for continuous industrial process applications. Technical specifications: Model: DHZ360 Drum diameter: 360 mm Rotary speed: 7,000 rpm Separation factor: 9,000 Bodpfxezlhdxs Amrsdh Motor: Y132M-4-B5 Motor power: 7.5 kW Dimensions L × W × H: 1,495 × 1,130 × 1,485 mm Weight: approx. 1,200 kg Automation: automatic cleaning and automatic solids / sludge discharge Typical applications: vegetable oil clarification edible oil processing oil-water-solid separation degumming / refinery process liquids industrial liquid clarification food and beverage process liquids fine chemical process liquids removal of fine suspended solids from liquids The DHZ360 can be integrated into existing process lines where continuous separation, clarification or polishing of process liquids is required. Final technical suitability should be confirmed according to the buyer’s product, viscosity, temperature, solid content, density difference and required separation result. The machine is offered as new equipment supplied through an EU seller. Final configuration, delivery time and documentation can be confirmed before order. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: neue Juneng DHZ360 selbstreinigende Tellerzentrifuge / Separator. Hersteller: Juneng Modell: DHZ360 Typ: Tellerzentrifuge / Zentrifugalseparator Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung in die Slowakei / EU kann organisiert werden Die Juneng DHZ360 ist eine automatische Tellerzentrifuge zur Hochgeschwindigkeits-Trennung und Klärung von Flüssigkeiten mit feinen Feststoffen. Die Maschine verfügt über automatische Reinigung und automatischen Feststoff- / Schlamm-Austrag und ist daher für kontinuierliche industrielle Prozessanwendungen geeignet. Technische Daten: Modell: DHZ360 Trommeldurchmesser: 360 mm Drehzahl: 7.000 U/min Trennfaktor: 9.000 Motor: Y132M-4-B5 Motorleistung: 7,5 kW Abmessungen L × B × H: 1.495 × 1.130 × 1.485 mm Gewicht: ca. 1.200 kg Automatisierung: automatische Reinigung und automatischer Feststoff- / Schlamm-Austrag Typische Anwendungen: Pflanzenölklärung Speiseölverarbeitung Öl-Wasser-Feststoff-Trennung Prozessflüssigkeiten in Raffination / Degumming industrielle Flüssigkeitsklärung Lebensmittel- und Getränkeindustrie Feinchemie Entfernung feiner Schwebstoffe aus Flüssigkeiten Die technische Eignung muss je nach Produkt, Viskosität, Temperatur, Feststoffgehalt, Dichteunterschied und gewünschtem Trennergebnis final bestätigt werden. Die Maschine wird als neue Ausrüstung über einen EU-Verkäufer angeboten. Endkonfiguration, Lieferzeit und Dokumentation können vor Bestellung bestätigt werden. Herstellerfotos, technische Unterlagen und Videobestätigung auf Anfrage verfügbar. Preis: FCA / Lieferung EU nach Vereinbarung, zzgl. MwSt.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,800 kg, type of input current: three-phase, input voltage: 380 V, total height: 4,500 mm, total width: 1,400 mm, total length: 1,400 mm, The lime feed system is one of the main components of the desulphurization system. This particular system is installed in one of the incinerators. The main challenge was to ensure that the top section could be removed using a forklift with a maximum lifting height of 3 meters. Features: 1. A vibration motor is installed on the big bag mounting plate to improve lime dispensing. Bedpjzphdgofx Amrodh 2. The upper section is mounted on the hopper with a window, and the connection point is sealed. 3. A platform is provided for access to the window for opening the big bag. 4. The big bag is separated from the tray by means of a pneumatically operated valve. 5. The tray is suspended on strain gauges to monitor sorbent availability and adjust sorbent feed rate. 6. A level sensor is also included. 7. A mixer is installed in the tray. It also has a seal to prevent the sorbent from escaping the system. 8. The steel structure is designed to accommodate the installation of a screw conveyor. 9. The steel structure provides unobstructed access underneath for maintenance of the system components.