Used Module T Germany Gmbh Bürocontainer 20 Fuß Neu Kaufen for sale (115,008)

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer. Iedpfxeytr Swo Abuear

Condition: new, Year of construction: 2026, The item is generally a project-based product or, depending on availability, available as a demonstration machine. The purpose of the labeller is to fully automatically label a cylindrical product. Description Iodpfx Absq U Sihjusar - Machine materials: 1.4301 and anodised aluminium alloy - Control via Siemens PLC + HMI - Cylindrical products from Ø20mm to Ø110mm - Accuracy: ± 1 mm (excluding product and label faults) - Technical documentation provided via regional partners Label roll - Inner diameter: 76 mm - Outer diameter:

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: Ijdpfxoynr E To Abuear - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Iodpfxjyhxl Rs Abuoar Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system Iaedpepy Uzyefx Abujr - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, SK LASER KOLLTRONIC F20iW1 · IPG MOPA 20 W · XXL Workstation · X/Y/Z axis travel Laser Safety Class 1 · CE · Made in Germany System concept: - New complete system with IPG MOPA 20 W fiber laser + XXL workstation for productive operation. The workstation features a - removable central worktable, with the floor area beneath freely accessible. Iaedpfx Aboyizvwjuor XXL Workstation: - Seated/standing workstation with ample legroom - Aluminium housing - Bright work light, extraction nozzle DN50 - Side and front doors: left and right side, front door with slot - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis system – SK LASER X/Y/Z travel: - Gantry with 2 motorized Z-axes and rotary axis - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel path depends on installation) - 2 spindles per axis for increased stability - Axis controller - Made in Germany Laser – IPG MOPA fiber laser: - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 2-350 ns, MOPA (plastic-compatible) - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 300 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, table length: 700 mm, table width: 500 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, Equipment: cabin, New: SK LASER KOLLTRONIC F20iW1 – 20 W IPG fiber laser with automatic drawer system, Laser Class 1 System Concept - Complete system consisting of fiber laser + Workstation 1 with a drawer system for efficient loading and unloading. - Automatic initiation of the laser job when the drawer is closed. At the end of the job, the laser head is automatically retracted in the Z-direction from the working area. Workstation & Drawer System: - Sitting/standing workstation with ample legroom - Aluminum housing - Bright work light, suction connection DN50 - Drawer system: 2 positions, max. load 300 kg (150 kg per side) - Drawer dimensions approx. H = 500 mm × W = 700 mm, motorized travel - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis System – SK LASER X, Y, Z travel: - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel distances depend on installation) - Two spindles per axis for increased stability - Axis controller Iaodpfx Aoyizr Ssbuor - Made in Germany Laser – IPG fiber laser: - Diode-pumped ytterbium fiber laser - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 200 ns - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 350 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 1,200 mm, total height: 1,800 mm, total length: 940 mm, working range: 175 mm, height adjustment type: electric, door opening width: 1,100 mm, door opening height: 700 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Laser Protection Class 1 · Made in Germany · NEW 12-month warranty System & Workstation: - Combined sit/stand workstation, aluminum housing - Fully glazed right-front door, safety glass LK 1 - Bright work light, suction nozzle DN50 - Standard size: H 1760 × W 920 × D 940 mm - Workstation XXL W 1200 × H 1800 × D 940 mm, sliding roof for crane loading, max. 350 kg - Manual sliding door, opening approx. 1100 × 700 mm - Safety equipment: emergency stop, two-channel interlock, Performance Level 4 - Motorized Z-axis, travel range 400 mm, focus dependent on lens Laser: - IPG Ytterbium fiber laser - Output power 20 W, pulse energy 1.0 mJ - Wavelength 1060–1070 nm, pulse duration 100 ns - Pulse frequency 20–80 kHz, air-cooled, power consumption < 400 W - Beam quality M² < 1.2 Ijdpsyipxasfx Abusar - Pilot laser + 2 distance lasers, Y-direction manually adjustable Scanner & Control: - F-Theta lens F = 254 mm, marking field 175 × 175 mm - Windows 11 Pro, SSD, 23" monitor, keyboard & mouse - Interfaces: RS232, Ethernet, USB - SK CONTROL software for texts, logos, QR/datamatrix codes, barcodes Work Area & Safety: - Magnetic positioning on stainless steel platform 710 × 400 mm, hole grid 25 mm - Operating conditions: 230 V / 50 Hz, 15–35 °C

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Iasdjuyk N Ijpfx Abuer

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition Iasdpfxora N A No Abuer make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: like new (used), functionality: fully functional, We are offering an as-new HÄCKER chamber filter press Type 01.120 with a new control cabinet. Electrohydraulics with a double-acting cylinder. Equipped with new filter plates, which can be configured as needed for your application. Includes the following additional equipment: - Automatic plate shifting device with automatic shaking system - Light barriers on both sides - Automatic filtrate drip trays Technical specifications: Condition: Demonstration unit, unused Plate size: 1,200 x 1,200 mm Number of chambers: optional, depending on plate pack and application Cake thickness: optional, depending on plate pack and application Capacity: 2,650 liters Filter area: 175 m² Operating pressure: 10 bar Drive power: 2.2 kW Discharge is open via a filtrate corner and a filtrate trough. We can also offer you a matching HÄCKER piston pump for this filter press. Iaedpfxsyhn H Tj Abuer For further details or technical questions, please feel free to contact us at the provided phone number or email address at any time.

Condition: new, Year of construction: 2025, - Demonstration machine from 2025 completely made of stainless steel including Washing pump - Automatic basket drive - Touch button for turning the basket outside the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running Iodpfeg Hgcwsx Abuear - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 1180 mm - Usable height of the basket to the lower edge of the nozzle holder 675 mm - Flat jet nozzles - washing pressure 4 bar - Return bend as a condenser for little water consumption - including 20 KG LCT Power Star 50-730 - delivery after receipt of payment within 5 - 6 weeks - 24 months guarantee

Condition: used, 5tSWF Krantechnik GmbH Iaodpfxedc A R Ts Abuer

Condition: used, Sanitary container 20 feet Iedsuwz A Topfx Abuear External dimensions: 6.10 x 2.45 x 2.55, *

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz Iedpfxeupwx Hj Abuear - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Iaedpfxsw I R Rnj Abuor Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as per photos Iedpfx Abji D T Iyjuoar

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces Iajdswbv Eropfx Abusr - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, functionality: fully functional, machine/vehicle number: 9420358 IMA, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision VM – Medium Frequency Spot Welding System Manufacturer: ElmaTech GmbH Location: Morsbach, Germany System consists of: MF Inverter: MIDISpot Vision QSVM 9000/12000T Serial number: 9420358 IMA Weight: 95 kg MF Transformer Handheld Welding Gun: ELMA Vision VM Serial number: 9420356 IMA Weight: 35 kg Standard: EN500063 Description: Isdpfx Abjx Dch Aouear This welding system from ElmaTech comprises a high-performance medium-frequency inverter (QSVM 9000/12000T) and an MF transformer handheld welding gun (ELMA Vision VM). It is specifically designed for professional resistance spot welding and is ideal for: - Automotive and body construction - Metal processing - Robot-based welding cells - Manual and semi-automatic spot welding workstations The medium-frequency technology (10 kHz) ensures: - High energy efficiency - Consistent welding results - Reduced electrode wear - Optimal process control Technical Data – MIDISpot Vision QSVM 9000/12000T (MF Inverter) Output: U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty cycle: 5 % Input: Voltage: 3~ 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Further details: Insulation class: F Cooling: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision VM (MF Transformer Handheld Welding Gun) Output: U₂₀: 12.5 V Current range: 0 – 15 kA Welding energy: 15 kAs Input: Uₙ: 560 V Frequency: 10 kHz Power: 30 kVA Duty cycle: 50 % Protection class: IP 21 Further details: Insulation class: F Cooling: WF (water cooling) Weight: 35 kg Typical Applications: - Spot welding of steel and stainless steel - Body construction / vehicle manufacturing - Industrial high-cycle production - Robot-supported welding processes - Repair and rework stations

Condition: used, functionality: fully functional, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System includes: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Spot Welding Gun: ELMA Vision CM Serial numbers: 9420357 IMA, 9420363 IMA Standard: EN500063 Condition: Used, technically flawless Description For sale is a complete MF spot welding system from ElmaTech, consisting of a powerful medium-frequency inverter (QSVM 9000/12000T) and the matching MF transformer spot welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical areas of use include: - Vehicle manufacturing - Automotive suppliers - Metalworking - Robotic welding cells (e.g., KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to its medium-frequency technology (10 kHz), the system offers high energy efficiency, fast control response, and excellent weld quality. Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty Cycle: 5% Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional Information Insulation class: F Cooling type: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision CM (MF Transformer Spot Welding Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Iajdpfx Absx Au Tneujr Input Uₙ: 560 V Frequency: 10 kHz Duty cycle: 50% Power: 30 kVA Protection class: IP 21 Additional Information Weight: 35 kg Insulation class: F Cooling type: WF (water cooling)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 Ijdpou Hl R Tofx Abuoar spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, 5-axis gantry machining center CYPORT CP 4030 HIGHLIGHTS • 5-axis simultaneous machining thanks to 2-axis fork-type milling head with direct drives • Powerful milling spindle with 12.000 min-1 • Large Working space with smallest footprint • HEIDENHAIN iTNC 530 • All-round access to the workspace • Tool magazine with 48 pockets Travels X/Y/Z: 4,000 / 3,000 / 1200 mm Gantry passage Y/Z: 3,280 / 1,400 mm Rapid Feed X/Y/Z 30/30/30 Feed Force X/Y/Z: 10.000N 2-axis-NC-swivel head M21 of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A 100 Speed: 12,000 rpm Power: 27/32 kW (100%/40% DC) Torque: 201/253 Nm (100%/40% DC) Tool magazine: Number of pockets: 48 pcs. HSK-A 100 max. tool diameter: 105/130 mm max. tool length: 300 mm max. tool weight: 8 kg Control: HEIDENHAIN iTNC 530 5-axis path control Electronic hand wheel HR 410 Coolant system Tank volume: 800 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter Coolant-airblast-changeover for external Coolant Work piece measuring system: Touch probe M&H - radio controlled Working area coverage Documentation CE-certification NEW COMPONENTS Ball screws NEW All bearings NEW Recirculating roller units for linear guideways NEW Tool Changer NEW Counterbalance cylinder NEW Lubrication distributors NEW All pipes and cables NEW All hoses NEW Bellow-types way covers NEW PVC-Lamellae NEW Safety Bumper NEW Electrics components (switches, relays, contactors, etc.) NEW Safety glass panes NEW Paint coating NEW REBUILT COMPONENTS C-Axis A-Axis Motor milling spindle Drive motors Hydraulic unit Hydraulic valves Complete Pneumatic system * All wear parts in the sub-assemblies have been replaced by new parts. The condition of the components corresponds to the high quality standard of the exchange program. REFURBISHED COMPONENTS Machine table Z-Ram X- and U-Carriages Y-Carriages Y-Crossbeam Ijdeivn Euspfx Abuoar Caterpillar energy chains Coolant unit Central lubrication system Sheet metal enclosure * All structural parts have been inspected, sand blasted, reground / scrapped, measured and thereafter repainted. The accuracy of the structural parts is identical to that of our new machines. MADE IN GERMANY

Condition: like new (used), Multistage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product no.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg Iasdpfx Aofz D Dnobuor

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate Iaodpfx Aow Tk E Asbusr

Condition: new, Year of construction: 2024, machine/vehicle number: BN120XT-HA-X, JEWELliner "CUT" 120W model series "PremiumPlus" Cutting & Marking in very short working time. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Our engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm. Thicker metals are possible, please contact us for more informations. More materials to cut or engrave like all metals, ceramic and some plastics, are possible. Applications can found in the jewellery ans also in other production areas. The machine dimension is very compact to integrade simple into a production area. Samples to cut: gold, silver, brass, carbon, aluminium Samples of material to mark: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional The main parts of JEWELliner "CUT" ( BN120XT-HA-X ) : - fiber laser unit with scan head and focus pointer Ijdpfx Ajf Ul Uijbusar - security housing „Laser Class 1“ with 280x200mm security glass - electrical automatic door opening - emergency button - 180° view area to the marking field - electrical z-axis for automatic focus positioning - configured engraving software Specification: - laser technology: fiber laser - outputpower CW: 120W - available frequency: 2.1 - 6300kHz MOPA - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – bigger or smaller possible - focus range: ca. 2 mm - min character high: 0.3 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L850 x W660 x H680 mm - weight: ca. 80kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!