Used Mbo, Multinak, Band All, ... Folding Machine, Saddle Stitcher, ... for sale (80,855)

Condition: used, sheet width 2000 mm Bsdpjy Aa Igefx Afgewu plate thickness 3,5 mm distance between columns 2050 mm daylight opening 355 mm weight of the machine ca. 2,8 t dimensions of the machine ca. 3,5 x 1,5 x 1,5 m Bending machine - Bending angle preselection via limit switches

Condition: new, sheet width 1250 mm plate thickness 1,5 mm distance between columns 1300 mm daylight opening 80 mm Bedpfoy Aa Iaox Afgjwu 155 ° total power requirement Handbetrieben weight of the machine ca. 0,18 t dimensions of the machine ca. 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m.

Condition: new, Year of construction: 2026, CORMAK G5025 Metal Band Saw The CORMAK G5025 metal band saw is a professional band sawing machine designed for precise cutting of pipes, profiles, bars, and components made from various grades of steel. Its robust construction, hydraulic control of arm descent, and two blade speeds make the machine suitable for both one-off and batch production. Key Advantages of the CORMAK G5025 Band Saw Two blade speeds – 36 and 72 m/min – allow the operating parameters to be adjusted to the type of material being processed. Hydraulic, stepless control of arm descent – enables precise control of the feed rate during cutting. Robust arm made of profiled cast iron – provides high structural rigidity and reduces vibration. Bearing and carbide blade guides – ensure stable and precise guidance of the cutting blade. Arm swivelling in both directions – allows angled cuts in the range from -45° to +60°. Cooling system – an electric pump and drain tray help effectively remove heat and contaminants from the cutting area. Automatic drive shut-off after completion of the cut – increases safety and ease of use. Guards and safety microswitches – provide increased operator protection during operation. Rigid Cast-Iron Arm The saw arm is made of profiled cast iron. The high rigidity of the construction reduces vibrations generated during machining and helps maintain accurate cutting geometry. Cutting Blade Drive The drive is transmitted from the electric motor through a worm gearbox to the drive wheel that powers the cutting blade. This solution ensures stable operation of the system and appropriate torque transmission when cutting steel components. Precise Blade Guiding and Tensioning The blade is guided by adjustable bearing and carbide guides. The mechanical manual tensioning system allows the blade to be properly prepared for operation and maintains the correct blade tension. Hydraulic Arm Descent Control The stepless hydraulic adjustment allows the arm descent speed to be precisely adapted to the type, shape, and cross-section of the material being cut. This provides smoother cutting and helps reduce excessive load on the blade. Arm Adjustment Range from -45° to +60° The arm's ability to swivel in both directions increases the versatility of the band saw. The design allows both standard straight cuts and angled cuts in the range from -45° to +60°. Standard Equipment main motor with worm gearbox, adjustable blade guides, cooling system with electric pump, stable welded base, control panel mounted on the arm. Optional Equipment roller table extension. Technical Data – CORMAK G5025 Specification Value Cutting blade size [mm] 2720 × 27 × 0.9 Blade tensioning Mechanical (manual) Blade speeds [m/min] 36 / 72 Arm descent control Hydraulic, stepless Minimum material length in the vise [mm] 100 Bjdpfji D Ddiex Afgewu Vise base height [mm] 1000 Power supply 3-phase, 400 V Main motor power [kW] 1.5 Cooling pump power [kW] 0.025 Dimensions (L × W × H) 1055 × 745 × 1850 mm Weight [kg] 370

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Machine with PLC control Feed rate: 12/16 m/min Edge feeder for roll and strip material, automatic 1901 Glue application unit, cartridge 1906, with sensing nozzle Pneumatic pressure unit, motorised adjustment to edge thickness 1926 Trimming unit, twin-motor, pneumatically swivelling 1918 Rigid milling unit up to 30 mm, 1962 MOT 5 milling unit with multifunction capabilities: flush, radius, chamfer, 1966 Radius scraper 1927 Corner copying machine 1983 Surface scraper 1964 1944 sanding unit Blow moulding nozzles Technical specifications: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Minimum workpiece length: 140 mm Maximum gluing thickness: 13 mm Weight: 1,350 kg Machine dimensions: 5850 x 1000 x 1750 mm Bedpfxezk N Hro Afgswu Location: Röllbach Availability: at short notice

Condition: like new (used), functionality: fully functional, Used professional deburring machine Used, professional, and robust deburring machine for the efficient removal of burrs and rounding of edges on metal parts. Suitable for use in workshops and industrial production environments. The machine is equipped with 3 brushes and a powerful 2.2 kW motor. Thanks to its solid construction and weight of approximately 410 kg, the machine is suitable for professional and continuous use. Technical specifications: Max. material dimensions: 120 × 120 mm Brush diameter: 250 mm Number of brushes: 3 Motor power: 2.2 kW Voltage: 400 V Bwodpfxsz Ek Evs Afgeu Speed: 1,380 / 2,840 rpm Weight: approx. 410 kg Condition: Used Available immediately. Inspection and testing of the machine are possible by appointment.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 700 kg, total width: 1,000 mm, total length: 2,700 mm, total height: 2,250 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, Blade surfacing machine for band saw blades – ISELI R410 Year 2004 Blade length from 6 to 10 m Bjdpfozy U Imjx Afgswu Maximum blade width 360 mm Blade presence sensor Vertical movement of pneumatic pressure roller Horizontal movement of adjustable head with handwheel Electrical wiring diagram Operation verified (video available upon request via WhatsApp) Dimensions for transport 2700x1000x2250h mm Weight 700 kg

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Weight 900 kg Bedpozmy N Nefx Afgswu

Year of construction: 2006, condition: ready for operation (used), Two Heidelberg folding systems are available. 1) Stahlfolder Heidelberg 56 system, year of manufacture: 2006, flat pile feeder: FFH-56, min. sheet dimensions X/Y: 140mm/1800mm, max. sheet dimensions X/Y: 560mm/900mm, paper weight range: 40g-250g/m², max. stack height: 800mm, max. throughput capacity: approx. 200m/min, buckle plate station: BUH-56, working width: 560mm, folding roller diameter: 44mm. 2) Stahlfolder Heidelberg 66 system, year of manufacture: 2006, min. sheet dimensions X/Y: 140mm/180mm, max. sheet dimensions X/Y: 660mm/1040mm, paper weight range: 40g-250g/m², max. stack height: 1200mm, throughput capacity: approx. 200m/min, working width: 660mm, folding roller diameter: 44mm. Documentation available. On-site inspection is possible. Bwodpfx Afeyddzxjgsu

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Bedpfxszuyqio Afgjwu Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU plate thickness 2.50 mm KU thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° Bwedpfx Aoxaa S Dsfgou weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1250 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing Bwsdpfxjwq I U Rj Afgju manual operation O.K. No backgauge *

Condition: used, Year of construction: 2011, Booklet Size (min./max.): 105 x 210 mm to 325 x 450 mm Booklet Thickness: Max. 25 sheets (80 gsm) or up to 5 mm Max Speed: Up to 2,000 booklets per hour Stapling Options: Flat or loop (ring) staples Stapling Heads: Up to 4 heads can be used on 6 positions (2 standard) Power Supply: 220 V, 10 A Dimensions (H x W x D): 86 cm x 103 cm x 71 cm Bwedpfoziix Sex Afgsu Net Weight: 240 kg Format: 325 x 450 mm Equipment: regular and optional eyelet sewing (standard staples, cheap to use)Stitching Heads: adjustable heads possibility to turn off sewing or folding (this allows, for example, sewing only) triggering from a button or a photocell counter of copies made lateral and frontal alignment indicator light indicating lack of staples SRA3 format Supports non-standard formats.

Condition: used, Year of construction: 1987, total length: 7,100 mm, total width: 1,300 mm, total height: 1,300 mm, Colour: Green Empty weight: 4.000 kg Bjdpfxezrhtys Afgswu Price: On request - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 301/405 - Drive system: Conventional - Folding machine model: Semi-automatic - Drive system: Hydraulic - Power [kW]: 2.2 - Bending direction: Upward bending - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 6020 - Max. opening [mm]: 150 - Stop type: Manual - Angle adjustment: Manual - Max. bending angle [°]: 135 - Options: Long folding machine - Transport dimensions: 7100mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer Machine in perfect condition, ready to work. RFH-66 continuous feed BCUH-66 folding module Year of production 2005 6 cassettes 2 electronic knives side cassette with 1 knife SKP.D 66 press auxiliary roller for perforation First rollers divided for gluing Gluing machine with pneumatic nozzles Max format: 660x1200mm two LCD control panels Counter with packaging, speed control, etc. Feeding on a suction roller Soundproofing covers. Window cassette. Bwodpfjzlgddsx Afgeu Documentation, additional tools and equipment.

Condition: ready for operation (used), Hole Punch Centre cut Slim line stitching heads Bedpfeir A Hasx Afgowu

Condition: ready for operation (used), Year of construction: 2008, Flat pile feeder, 4 pockets , 2 knives, BCUH 56 delivery, pump Bwedpjz Aahqefx Afgju machine is equipped with new rollers

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Joining milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic pressure unit 1816 - Trimming unit 1822 - Milling unit 1942 M: radius, chamfer, flush - Blowing nozzle, complete - Scraper unit 1929 - Chip collection box Bwodpfxszk Nlhj Afgsu - Surface scraper 1964 - Exhaust hood set - Protective hoods, complete - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm - Max. edge banding height: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Rake blade unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1490 Pa - Milling unit: 1650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper unit connection: 70 mm - Compressed air: 6 bar

Condition: good (used), Year of construction: 2001, sheet width 2020 mm plate thickness 1.5 mm ST bending angle max. 180 ° Swing beam adjustment ca. 20.0 mm Bending time for 90° 5.5 sek Control konv. voltage 380 V total power requirement 1.5 kW Bjdpfszr Rqhex Afgowu weight 1180 kg range L-W-H 2650 x 1230 x 1100 mm Features: - Simple electric motor-driven swivel bending machine - Manual depth/material stop * Stepless adjustment up to a maximum of 700 mm * Adjustment via handwheel from the rear * Analog position display - Simple manual angle adjustment - 1x bending tool set * With bending rail .. 10 mm - Manual lower crossbar adjustment .. approx. 20.0 mm - Emergency stop button on the front - 1x freely movable double foot switch - Operating instructions (DK)

Condition: used, Year of construction: 1990, Storage location: Nattheim Bodjz H Tw Dopfx Afgowu

Condition: used, Format: 310 x 432mm Bodpox N I Uhsfx Afgswu Equipment: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Bwjdpsx Eilqofx Afgou Machine in TOP CONDITION Available from stock Lieboch

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm adjustment UW 80.0 mm back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW Bwedpfx Aoy Raiyjfgeu weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology Bedpfx Afozlbpzsgewu - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter Bsdpfx Afei Anadjgowu F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: used, Year of construction: 1993, Used machine Bjdpfezyy Avox Afgowu Year of manufacture: 1993 Equipment and technical data: