Used Kraussmaffei Used Injection Molding Machine for sale (91,518)

Condition: used, Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, clamping force: 2,450 kN, screw diameter: 50 mm, clearance between the columns: 610 mm, total length: 6,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 12,000 kg, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 68 A, We offer this used WOOJIN PLAIMM TE250 injection molding machine, manufactured in 2020. Serial number: 2002501597 Model: TE250 Clamping force: 2450 kN Screw diameter: 50 mm Injection unit: IE780 Electrical power: 48 kW Motor rated current: 50 A Rated current at full load: 68 A Control voltage: 400 V Frequency: 50 Hz Bsdszwupxjpfx Acnell Dimensions (L×W×H): 6.7 × 1.7 × 2.0 m Weight: 12 t Date of manufacture: 2020.12.21 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Blsdpfx Acszqam Ajnsl Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Blodpfx Acex Uqb Iensl Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Bjdpfx Acjzc Nw Aenjll Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Bjdpjx Eithsfx Acnsll Year of manufacture: 2011 Serial number: 218960 Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Serial number: 173062 Bjdpfsx Eiq Hox Acnoll Control system: Arburg Selogica Screw diameter: 18 mm

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Bodpfjzqdagex Acnell Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g Blsdezxfg Ropfx Acnol • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. Blsdpfszrb Spjx Acnol A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the very end.

Condition: excellent (used), Year of construction: 2015, TEDERIC D250/1100 injection molding machine with SW6310S robot Manufacturer: TEDERIC Model: D250/1100 Year of manufacture: 2015 Serial number: D1025/0747 Robot: SW6310S Robot year of manufacture: 2019 Technical specifications Clamping force: 2,500 kN Screw diameter: 55 mm Centering diameter: injection side: 160 mm moving side: 100 mm Column spacing: 580 × 580 mm Minimum mold height: 250 mm Maximum mold height: 600 mm Maximum platen spacing: 1,150 mm Maximum opening stroke: 550 mm Injection volume: 601 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 31 kW Heater power: 19.7 kW Screw diameter: 55 mm Ejector stroke: 160 mm Screw: bimetallic Machine condition Total operating hours: 79,526 h Automatic operating hours: 40,612 h Bedeziiyvepfx Acnoll TEDERIC SW6310S robot (2019) included.

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, functionality: fully functional, clamping force: 8,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8500 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1600 mm Distance between tie bars (h x v) 1140 x 1140 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Bledpfx Ajyb Sx Hjcnsl Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 43000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 4 x hydr. core pulls - 12 x hydr. sequentional valves - 2 x 12 folds water flow regulator - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 27,000 kN, screw diameter: 60 mm, clearance between the columns: 630,570 mm, injection weight: 760 g, MACHINE IN PERFECT CONDITION, AVAILABLE FOR ANY INSPECTION. Blodpfozw D Eiox Acnsl

Condition: excellent (used), Year of construction: 2020, WOOJIN PLAIMM TE 50 INJECTION MOLDING MACHINE Technical specifications: Machine type: electric injection molding machine Year of manufacture: 2020 Blsdpoy Ulfzefx Acnel Operating hours: Auto: 44,097 h Motor: 3,719 h Additional counter: 28,454 Clamping force: 490 kN Injection volume: 34 cm³ Screw diameter: 22 mm Injection weight: approx. 30–35 g PS Maximum mold opening stroke: 250 mm Column spacing: 360 x 360 mm Platen dimensions: 530 x 580 mm Minimum mold height: 130 mm Centering hole diameter: 125 mm Maximum injection pressure: 2184 bar Total power: 20.7 kW Machine weight: 3600 kg Machine type: electric (E) The machine is in very good technical and visual condition. It has been regularly used in serial production and is available for inspection while in operation.

Condition: excellent (used), Year of construction: 2003, Demag Ergotic system Closing 35 tons Year of manufacture 2003 Bedor Avfnepfx Acnoll

Condition: excellent (used), Manufacturer: ARBURG Bodpsx Eitbjfx Acnell Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: excellent (used), Year of construction: 2020, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Bjdozpariopfx Acnjll Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 161-540 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 40 mm Shot weight: 206 g Injection pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x470 mm Platen size: 710x660 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic operation Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servomotor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 13200 kg Length/Width/Height: 5.60x1.72x1.95 m Bedpfx Aezpap Iscnsll All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2004, machine/vehicle number: PR25, Used NEGRI BOSSI 850T injection molding machine - Year 2004Technical Specifications & Performance DataThis NEGRIBOSSI U850 Injection Molding Machine delivers high-tonnage performance for large-shot applications and precision molding. Configured with a 100 mm screw, it offers robust shot volume and clamping power, making it suitable for industrial packaging components and beverage production accessories. Manufactured in 2004, the machine integrates proven NEGRIBOSSI engineering with an EUROMAP 8500H-6500 injection unit and a user-friendly HMI.Model: U850 (EUROMAP 8500H-6500)Clamping force: 8500 kNScrew diameter: 100 mmShot volume: 3925 cm3Shot weight (PS): 3570 gMaximum shot weight: 3750 gInjection pressure: 1670 barBetween tie-bars (H x L): 1140 x 1020 mmPlaten size (H x L): 1670 x 1580 mmMould height (min–max): 400–1100 mmOpening stroke: 1200 mmEjector stroke: 399 mmHydraulic operating pressure (mould/injection): 180 barMotor-pump power: 74 kWPlasticizing power (100 mm): 37 kWHeating power (100 mm): 37 kWTotal installed power (100 mm): 198 kWCore pullers: 2Robot interface: YesAir circuit: 1Electric dosing motor: YesMachine dimensions (L x W x H): 11550 x 2600 x 2305 mmMachine weight: 39600 kgAdvanced Automation & Control SystemsThe U850 features a modern HMI with clear operational menus and diagnostic pages to streamline setup and production. The machine supports robot interface connectivity for automated part removal and downstream handling. Electric dosing and precise plasticizing power ensure stable melt quality and repeatable cycles. Safety controls and process monitoring are integrated through the control interface to maintain consistent, high-quality output.HMI control: multi-page interface with technical characteristics viewAutomation: robot interface enabled for pick-and-place and cell integrationPower architecture: motor-pump 74 kW; plasticizing and heating 37 kW each (100 mm configuration)Process monitoring: live readouts for temperature, times, positions, and pressuresProduction Line Integration CapabilitiesThis injection molding machine integrates seamlessly into industrial packaging and beverage production environments, supporting automated cells with robots, conveyors, and quality control stations. Its robust clamping unit and generous tie-bar spacing accommodate multi-cavity molds for components used in used bottling line refurbishments and second hand production setups.Compatible with automated part removal robots and conveyors Bsdpfxszkht Do Acnoll

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Bsdpfxjx Eirqs Acnjll Screw diameter: 18 mm

Condition: excellent (used), Year of construction: 2014, BATTENFELD TM XPRESS 350/2250 INJECTION MOLDING MACHINE Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 h Clamping unit Clamping force: 3500 kN Platen dimensions: 1030 × 1140 mm Tie bar spacing: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum mold opening: 1380 mm Core centering ring diameter: 160 mm Maximum ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Bjdpfeziukgjx Acnell Injection volume: 1171 cm³ Injection weight (PS): 1078 g Injection pressure: 2070 bar Maximum injection speed: 600 mm/s Additional equipment 4 × pneumatic valve 2 × hydraulic core Kneeling system after professional refurbishment Dimensions and weight Machine length: approx. 7,100 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Machine weight: approx. 17,000 kg The machine is available for inspection and testing after prior arrangement of a date.

Condition: good (used), Year of construction: 2001, Battenfeld TM 4500/2800 injection molding machine Year of production: 2001 Control: Unilog B4 4 identical machines available Closing system: Closing force: 4500 kN Bodpfx Ajvn Sa Tscnoll Minimum mold height: 425 mm Maximum mold height: 770 mm Column spacing: 800 x 800 mm Mounting plate dimensions: 1155 x 1195 mm Mould opening stroke: 760 mm Injection unit: Screw diameter: 75 mm Shot weight (PS): 1506 g Injection volume: 1657 cm³ Specific injection pressure: 1739 bar Robot interface: Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20400 kg Oil tank capacity: 800 liters

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine mit Roboter Blsdpfeztp Ihjx Acnel Hersteller: ENGEL Typ: VICTORY 330/80 TECH Baujahr: 2012 Schließkraft: 80 Tonnen Holmabstand: HOLMLOS Schnecken DN: 35 mm Max. Hubvolumen: 110 ccm³ Spritzteilgewicht 100 g/PS Steuerung: CC200 Ausstattung: -Roboter, Hersteller: SEPRO, Typ: AXESS -2 x Kernzüge -Ausblasventil -Förderband -Sicherheitszaun

Condition: used, Year of construction: 1996, functionality: unexamined, ARBURG 221 M 250-55 injection molding machine. Clamping force: 250 kN. Year of manufacture: 1996. Complete with its two control cabinets (without display screen). It is sold in its current condition and is available for immediate removal, unless it is sold in the meantime. Bjdeztgpcopfx Acnjll You are welcome to visit and inspect the machine at our warehouse. We are open from 9:00 AM to 4:30 PM every day from Monday to Friday. Address: 11/14 Avenue Marcelin Berthelot, 92390 Villeneuve-la-Garenne, France. Price: €1000, loaded onto your truck. Please feel free to call if you require further information.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Bledpfxjx Rvcis Acnol Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Blodexzklqjpfx Acnsl Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.