Used Kraussmaffei Injection Unit for sale (32,586)

Condition: good (used), Year of construction: 2004, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, injection pressure: 2,000 bar, injection weight: 618 g, mold height (min.): 330 mm, plate width: 1,050 mm, plate height: 1,035 mm, overall weight: 12,000 kg, Robot W 621-ß077 x/y/z: 550/1200/2530 mm Nedpfezyfw Eex Ab Asdc C-axis: max. rotation 90° Core pulls: yes Hot runner controller IMM 8 Control system: MC 4

Year of construction: 1999, condition: used, Clamping force: 80t, 3-phase mains supply: 400V, 50Hz, total rated current: 130A, upstream fuse: 160A, max. motor current: 30A, an on-site inspection is possible. The machine is located in Hungary. Nsdpfx Absz A Apbe Aedc

Condition: ready for operation (used), Year of construction: 1997, operating hours: 111,569 h, clamping force: 10,000 kN, This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system offers an optional REMAK RE-CNC 6-axis robot with a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection measurement stroke: 200 mm forward movement actually used to inject the shot • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance: Nedpfx Abeywlvrj Aedc

Condition: good (used), Year of construction: 1997, Krauss-Maffei KM 110-520 C1 Year: 1997 Screw diameter: 45 mm Clamping force: 110 tons Tie bar distance: 47x47 cm Shot weight: 234 g Ndodpfx Ajyh Rymob Aec

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 Nsdpfx Aoz Rmrdeb Aodc The machine is supplied with a Kuka robot and can be inspected during production.

Condition: excellent (used), Manufacturer: KRAUSS MAFFEI Type: KM 120-380 EX Control: MC5 Year of manufacture: 2008 Operating hours: 10113 h Technical data, clamping unit Clamping force: 1200 kN Tie bar spacing h x v: 470 x 470 mm Platen size h x v: 780 x 735 mm Minimum mold height: 200 mm Maximum mold height: 450 mm Nodpfx Abezyn Igs Aodc Maximum mold thickness: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 125 mm Tool weight: 1485 kg Technical data, injection unit Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticizing rate: 27 g/s PS Injection rate into free air: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 6 m x 1.7 m x 2.19 m Total weight: 9700 kg Equipment • Screen display in German • Screen display in English • CEE socket 16A • Hydraulic core pull, 2x • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 12 interface • Schuko socket 10A

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C • Availability: Early 2027 Additional equipment • Handling: Wittmann robot system • Model: W743 • Power: 400 V, 18 A / 12.5 kVA Ndjdpfxjyyxc Dj Ab Aoc • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Year of construction: 2005, condition: used, Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible. Ndsdpszybvdjfx Ab Aoc

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Ndsdjyh I Emopfx Ab Aoc Screw diameter: 135 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Type: Horizontal Drive: Hydraulic

Year of construction: 2008, condition: used, Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible. Ndsdpozybvksfx Ab Aoc

Condition: new, functionality: fully functional, Dear Sir or Madam, We have a plasticizing unit for an injection molding machine for sale. For sale to businesses only + no warranty. The unit must be inspected at our premises before purchase! Please contact us for more information! Technical specifications: Plasticizing capacity: 3000 Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle bore: 6 mm open Weight: approx. 1500 kg Adaptation for plasticizing capacity 3000 for injection unit SP6100. BluePower – full insulation for the plasticizing cylinder to reduce energy consumption. Standard screw. Wear-resistant plasticizing (increased wear protection) for plastics with more than 25% filler and reinforcing agents. Ndsdezxgw Ropfx Ab Ajc Electronic coding of the plasticizing unit for automatic recognition of technical data and maximum operating parameters: screw diameter, temperature, injection pressure, speed, plasticizing torque. Extended nozzle including additional control zone, heating band and thermocouple, to compensate for the immersion depth when using magnetic clamping plates. If you are interested, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Nodpfxjzg T I Ss Ab Ajdc Platen size: 540 x 540 mm Tool opening stroke: 350 mm Minimum tool mounting height: 200 mm Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300 kg

Condition: good (used), Year of construction: 2006, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM420-1900C2 Baujahr: 2006 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 70 mm Ndodpfx Abszl Sfme Asc Max. Hubvolumen: 1.047 cm³ Spritzteilgewicht: 853 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter SEPRO, Typ: SR4030 S3 VISUAL, Baujahr: 2006 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Ndedpfozrwy Aex Ab Aec Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: excellent (used), Year of construction: 2016, clamping force: 800 kN, Clamping force: 80 t Screw diameter: 30 mm Nedpfx Ajy Uffujb Aodc Distance between tie bars V: 180 mm Distance between tie bars H: 180 mm Type: Vertical Drive: Hydraulic

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm Ndsdpfszd Ta Nox Ab Ajc L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 156 cm³, plate length: 740 mm, plate height: 640 mm, total length: 5,350 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 6,500 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 80-380 EX Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control: MC5 Year of manufacture: 2008 Operating hours: 49673 h Technical data, clamping unit side Clamping force: 800 kN Tie bar spacing, horizontal x vertical: 520 x 420 mm Platen size, horizontal x vertical: 640 x 740 mm Minimum mold thickness: 300 mm Maximum mold thickness: 790 mm Ejector stroke: 100 mm Ejector force: 22 kN Centering of moving platen, diameter: 125 mm Centering of fixed platen, diameter: 125 mm Technical data, injection side Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 477 rpm Free injection flow rate: 289 g/s Number of heating zones: 5 Dimensions & Weight Machine dimensions, length x width x height: 5.35 m x 1.7 m x 2 m Total weight: 6500 kg Equipment Screen text in German CEE socket 16A Air valve 1x Machine with material hopper Machine with water manifold Leveling elements EUROMAP 67 Handling interface USB interface Schuko socket 10A Njdpoz Az Rdjfx Ab Aedc Tool heating 24x

Condition: excellent (used), Year of construction: 1998, Injection molding machine Ndedpfxsfx Tzte Ab Aoc With two components Kraussmaffei Multiinject KM200-1000-390 CZ Year of manufacture 1998 Closing force 200 tons Screw diameter 60 mm - 566 g Screw diameter 2 - 35 mm - 178 g Tie bar spacing 560 x 560 mm

Condition: excellent (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 250-1400 CX Stock No.: 503243 Manufacturer: KRAUSS MAFFEI Type: KM 250-1400 CX Control System: MC5 Year of Manufacture: 2010 Operating Hours: 54872 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing (horizontal x vertical): 630 x 630 mm Platen Size (horizontal x vertical): 995 x 1050 mm Minimum Mold Thickness: 330 mm Maximum Mold Thickness: 1150 mm Opening Stroke: 820 mm Ejector Stroke: 200 mm Ejector Force: 58 kN Centering of Moving Platen Diameter: 160 mm Centering of Fixed Platen Diameter: 160 mm Tool Weight: 3430 kg Technical Data – Injection Unit Screw Diameter: 55 mm Injection Volume: 570 ccm Injection Pressure: 2387 bar Screw Length: 22 l/d Screw Speed: 260 rpm Plasticizing Rate: 49 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions (LxWxH): 6.5m x 2.2m x 2.3m Total Weight: 15000 kg Equipment 2x Temperature Control Units for Hot Runner System Screen Text in German CEE Socket 16A Pressure Accumulator for Increased Injection Performance + Ejector or Core Pull parallel Hydraulic Core Pull 1x Air Valve 4x Machine with Material Hopper Machine with Water Battery Machine without Handling System Leveling Elements EUROMAP 12 Interface Ndjdpfx Asz A Uhisb Asc EUROMAP 67 Handling Interface USB Interface Schuko Socket 10A Low-Wear Plasticizing Unit

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Ndjdpfx Aezgwbvob Aoc Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Nsdpowq D Efjfx Ab Aodc Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Condition: like new (used), Year of construction: 2023, operating hours: 1,900 h, clamping force: 1,600 kN, screw diameter: 105 mm, clearance between the columns: 18,701,420 mm, displacement volume: 4,546 cm³, total length: 13 mm, total width: 4 mm, total height: 3 mm, overall weight: 83 kg, pressure: 1,778 bar, 8 hot runner channels 16 sequential pneumatic valves 2 air blowers SERVO PUMP PC MC6 WEIGHT 83T DISTANCE BETWEEN PLATENS 3400MM Nsdpfey I Apqjx Ab Aedc

Condition: used, Year of construction: 1994, Krauss-Maffei KM 65-190 C1, Year of manufacture: 1994, Clamping force: 65 tons, Screw diameter: 35 Njdpfxsyh Rygo Ab Aedc

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Ndedpszw Atljfx Ab Aoc Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2016, clamping force: 1,100 kN, screw diameter: 22 mm, Hydraulic injection moulding machine manufactured in 2016. This Krauss Maffei 110-180-180 CX V features a clamping force of 1,100 kN and a minimum mold height of 377 mm. It includes a screw diameter of 22 mm and a centering ring of 125 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 110-180-180 CX V machine we have for sale. Contact us for further details. • Space between columns: 530 x 470 mm Ndodpfjz Dk Rvsx Ab Aoc • Minimum mold height: 377 mm • Centering ring: 125 mm • Core pullers: 3 • Pneumatic valves: 2 • Programmable inputs: 3