Used Josting Veneer Guillotine for sale (1,919)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,700 kg, Shelf length: 3000 mm Shelf width: 1300 mm Hot water heating system Two daylight openings 6 hydraulic cylinders Cylinder diameter: 85 mm Prjdpfjzgf Uwsx Ahcsa Emergency safety pull-cord switch Timed press opening Daylight opening: 400 mm total / 2 × 180 mm Year of manufacture: 2006

Condition: good (used), functionality: fully functional, Year of construction: 2013, actuation type: electric, working width: 3,050 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 10 1/min, stroke rate (max.): 47 1/min, sheet thickness (max.): 3 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 650 mm, power: 11 kW (14.96 HP), input voltage: 400 V, overall weight: 2,500 kg, total length: 3,800 mm, total width: 1,650 mm, total height: 1,650 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Digital display Psdpfjyhfplex Ahcjra

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Psdpfxsyf Eucj Ahcera Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, working width: 3,060 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 10 mm, back gauge: 1,000 mm, overall weight: 11,400 kg, TECHNICAL DETAILS Sheet width: 3,060 mm Sheet thickness: 10 mm Stroke rate: 12 strokes/min Electric back gauge: 1,000 mm MACHINE DETAILS Podpjyhmgrjfx Ahcsra Control manufacturer: Siemens Total power requirement: 22 kW Dimensions & Weight Space required: approx. 4,100 x 2,300 x 2,400 mm Machine weight: approx. 11,400 kg EQUIPMENT Foot switch

Condition: new, Year of construction: 2025, Plate dimensions 3000x1350 mm Daylight opening 400 mm Number of daylights 1 St. Heating 31,5 kW Specific pressure 2,5-5,0 kg/cm² Total pressure 90 t Psdpfxjyk H Sts Ahcjra Motor output 1,5 kW Dimensions (L/W/H) 3480x1500x2000 mm weight of the machine ca. 5000 kg

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Pedpfewxdctex Ahcera Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: excellent (used), Technical specifications: Number of pistons: 6 Piston diameter: 140 mm Psdpfx Ahjw U Nvpocsra Connection to central heating Shelf dimensions: 3500x1300 mm Clearance: 120 mm Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm

Condition: good (used), Year of construction: 1993, functionality: fully functional, total width: 2,550 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 7,500 kg, Manufacturer: LVD Model: HST 40/6 Location: Strojrem, Križevci Prodpfx Ahjvtl Nrocea Year of production: 1993 Bending length: 4050 mm Max bending thickness at 45 kg/mm²: ~6 mm Working stroke: 1000 mm Machine dimensions: 4900x2550x1800 mm Machine weight: 7500 kg Machine rated power: 12 kW

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Very good condition. Available immediately. Psdpfx Ahovxvc Hecjra

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x1650x2150 mm Weight 6500 kg Total power requirement 52 kw Psdov A Hi Sjpfx Ahcjra

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5200x1650x2250 mm Podpfx Ahsv A Hmkscjra Weight 9000 kg Total power requirement 45 kw

Condition: new, Year of construction: 2025, Mechanical sheet metal guillotine METFORMER HCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Predefwmydjpfx Ahcea Model, HCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: ready for operation (used), control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 10 mm, total length: 4,600 mm, total width: 2,520 mm, total height: 1,850 mm, Equipment: angle stop, foot remote control, Sheet metal shear Amada GH1040 Z New blade set Fully functional Pedpfjx Igndjx Ahcera Hydraulic cylinders were overhauled approximately 6 months ago.

Condition: new, Year of construction: 2025, – Capacity 1360 x 3 mm – NC back gauge – Small cut sheet metal pieces are automatically ejected at the front of the machine – Safety light barriers at the rear – Front sheet metal supports – Cutting line illumination – Foot operation – Emergency stop – 400V Psdpfox Izkaox Ahcsra

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 8x4000 SMO-4008-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5° - Strokes/minute: 8 - Backgauge retract distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total mass: 7300.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. Prodpoiuzupsfx Ahcoa OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Model: VC-26 Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Psdpfxewy Nhqe Ahcera Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Prodpfxewx Rrne Ahcoa Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works.

Condition: excellent (used), Year of construction: 2002, plate length 3500mm plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm total pressure 160 tons safety line switch Pjdpfxox Sqlzs Ahcera year 2002

Condition: excellent (used), Shelf length: 250 cm Width: 130 cm Pedpfxoxgnp De Ahcora Four actuators

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Pedpsvfxw Hjfx Ahcsra Equipment: cutting thickness 40 mm

Condition: used, Year of construction: 1995, The VITS QRV Variocut, manufactured in 1995, is a machine with a format of 1020 mm, currently in stock and located in Germany. It features a calendar width of 1020 mm and is of the Micromatic type, capable of handling paper weights between 65 and 120 grams. The PC and cutting edge control were replaced in 2012. The machine operates at a maximum speed of 220 meters per minute with register control and includes an embossing unit from 2005. It offers a cutting accuracy of ??plusminus0.3 mm and is equipped with PC control Unico. The delivery terms are FCA. Format: 1020 mm Equipment: used shee cutter with PC control Unico Type: Micromatic PC and cutting edge control were replace in 2012 Embossing unit year 2005 Calender width 1020 mm Prodpfx Ahevfx Dyocea Machine speed max 220m / min with register control cutting accuracy: +/- 0,3 mm paper weight : max. 65-120 gram

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Psdpfstx T Tyex Ahcera

Year of construction: 2015, condition: used, New: No Serial number: 200803 15062561 Podpfx Astyxtzehcsra

Year of construction: 1978, condition: used, machine/vehicle number: 11566, working width: 4100 mm metal sheet thickness: 6 mm throat: 100 mm rear stop: 0 - 1000 mm Pjdpfxoy Aurj Ahcera power: 18,5 kW space needed: 4600 x 2200 x 1950 mm weight: 11000 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: 603, working width: 3050 mm metal sheet thickness: 6 mm rear stop: 650 mm Prodpfedzrpwjx Ahcea power: 380 V, 16 kW space needed: 3680 x 2060 x 1870 mm weight: 7580 kg