Used Javac Avalon 40.1 Pfc ""Air"" for sale (27,084)

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Hjdszu Aw Sopfx Agtent Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain Hodpeygx Hnjfx Agtont - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, input voltage: 400 V, power: 4.3 kW (5.85 HP), high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 Hodporfyrpjfx Agtsnt air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A connection: DN80 machine dimensions: length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C IP classification IP 44 standard

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement. Hjdpfx Agez Ah Uxetont

Condition: ready for operation (used), Year of construction: 2008, operating hours: 20,000 h, functionality: fully functional, 4 x Kaeser compressors, type DSD 238, with an average of 20,000 operating hours each. Hnodpez Ap Sxjfx Agtjt Inspection welcome in Bremerhaven. Sale is B2B only – preferably all units together for self-dismantling.

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. Hnodpfx Agjvy A Urjtot New conveyor belt cleaner.

Condition: excellent (used), Year of construction: 2018, operating hours: 11,531 h, functionality: fully functional, machine/vehicle number: CD10040145001, overall weight: 1,648 kg, total length: 1,958 mm, total width: 1,138 mm, total height: 1,857 mm, power: 55 kW (74.78 HP), operating pressure: 10 bar, noise level: 69 dB, intake vacuum (max.): 1 mbar, rotational speed (min.): 3,000 rpm, Equipment: type plate available, The CompAir L55 10 W is a reliable and energy-efficient screw compressor with heat recovery designed for continuous compressed air supply in industrial applications. With its robust design and advanced technology, it offers excellent performance and durability, ideal for demanding operating conditions. This model is used but has few operating hours and is therefore in very good condition. Hnodpfx Agounzdkjtet Technical details - Serial number CD10040145001 - Year of manufacture 10.2018 - Operating hours 11,531 h - Built-in compressor V3532 - Compression medium: air - Voltage: 400 V / 3 Ph / 50 Hz - Volume flow 9.51 m³/min - Stage pressure 10 bar - Intake pressure 1.0 bar - Full air flow 117 A - Speed 3,000 min-1 - Engine power 55 kw - Condition: very good For further details see pictures and type plate.

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity Hnsdezzrmpspfx Agtot - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, This listing is for an Air Liquide TR11 nitrogen Vessel. The unit is in full working condition and is ready for immediate release. Hnsdpfx Aoxx Aw Hjgtot Range of non-pressurised vessels used to store and transport liquid nitrogen. Light alloy construction with composite material neck

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm Hjdpsyr Ugusfx Agtent CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2015, operating hours: 65,031 h, functionality: fully functional, volume flow: 1,012 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Atlas Copco GA90 90 kW 7.5 bar 16.87 m3/min Hnjdey A Nwkspfx Agtst Year of manufacture: 2015 Operating hours: 65,031

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Maintenance and service-friendly drive concept ALMiG Gear 132 Year of manufacture 2011 Final pressure 10 bar Motor power 132 kW Volume flow : 18,04 Length 2800 mm Width 1400 mm Height 2025 mm Weight 3830 kg Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de Hedottv Ibopfx Agtsnt You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2019, Vaupel Air Tower, manufactured by Gram Filter line with fan Type/Model: FL 52 / VE 5500 / W3 Hsdpozhvvbefx Agtent Condition: Used Year of manufacture: 2019 Technical data Number of filter cartridges: 4 Number of solenoid valves: 4 G102 filter area: 52 m² G105 filter area: 84 m² Compressed air: 30 l/min Dust container: 35 l Weight: 630 kg Dimensions L x W x H: 1400 mm x 1200 mm x 2490 mm

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Hnsdjv Nztxepfx Agtst Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Condition: excellent (used), Year of construction: 2003, PROD. ULTRATROC TYPE SD7000A Hnsdpfxezkib Ne Agtjt S/N 032/16350/01 YEAR 2003 POWER (kW) 12.2 CAPACITY (m3/min) 116.67 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER R134a 33.5kg EXCHANGER COOLED (AIR/WATER) ON THE TANK DOCUMENTS CONNECTION dn 200mm NEW/USED USED

Condition: used, mileage: 242,466 km, power: 120 kW (163.15 HP), first registration: 05/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals at the front on the side, roof control unit with reading light on driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps at the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall lining, thermal insulation of the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle / rear axle * 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure from WAS * Adjustable floating table * Stretcher frame * Light carrying chair * Central locking for patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment Hnodpjz A Ncbefx Agtjt * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Skylight * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning at the front and rear * Automatic transmission * Telma retarder * Electric windows * electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Dual-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2024, at the front with approximately 6.0 mm and at the rear with approximately 4.0 mm tread depth Engine, automatic transmission, and rear axle are dry The engine runs smoothly, and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Hnjdpfxsw H Aw Ss Agtjt This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Digicolor is for sale. This granulate dryer operates according to the principle of dry air drying. 40 liters Small footprint Simple adjustment and operation Constant dew point of the dry air Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Hnodpfeywh E Aox Agtot Dust-free dry air thanks to adsorption rotor technology Anti-stress function, SmartMode, prevents over-drying of the plastic granulate.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 units of recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery. - Temperature 200°C, can be increased to 250°C! - Charging car, 5 units available, modification on request. - Homogeneous temperature distribution of +/- 10°C. - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel - Program execution with a good sensor as a cascade control system Hnsdpfsy Tkfwjx Agtot - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min - Electromagnetic door locking system - Rated power: 180 kW - Connection power: 241 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity We would be pleased to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Furnaces, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Curing oven, Post-curing of liquid crystal windows, CFRP support structure, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: excellent (used), Year of construction: 2013, operating hours: 30,533 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, plate length: 630 mm, plate height: 580 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 4,100 kg, Equipment: documentation/manual, BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control System: UNILOG B6 Year of Manufacture: 2013 Operating Hours: 30533 h Technical Data - Clamping Unit Clamping Force: 900 kN Tie Bar Distance h x v: 420 x 370 mm Platen Size h x v: 580 x 630 mm Minimum Mold Height: 450 mm Maximum Mold Height: 925 mm Opening Stroke: 475 mm Ejector Stroke: 150 mm Ejector Force: 41 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Mold Weight: 800 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 106 ccm Injection Pressure: 2042 bar Screw Length: 22 l/d Screw Stroke: 150 mm Screw Speed: 372 rpm Screw Torque: 490 N Free Injection Rate: 103 g/s PS Number of Heating Zones: 4 Nozzle Distance: 250 mm Dimensions & Weight Machine Dimensions L x W x H: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull, 2x Air valve, 1x Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant Screw drive with three-phase servomotor Ethernet interface Hedpfoz A A Hyox Agtont EUROMAP 13 interface EUROMAP 67 Handling interface Interface for color dosing unit Interface for temperature control unit Schuko socket 10A Mold heating, 8x

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Hnjdpfx Agszzlhajtet Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa Hjdeyr Utnopfx Agtjnt _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: not inspected (used), Year of construction: 2007, operating hours: 19,028 h, machine/vehicle number: AB1007, Vertical machining center Spinner MVC 610, year of manufacture: 2007 Delivery terms: Free on board (FOB) truck Location: 74906 Bad Rappenau Collection: The machine must be collected on October 7, 2026. The exact collection time will be arranged in advance. Payment terms: Payment in advance - by bank transfer Technical data: Travel X-axis: 610 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X / Y / Z: 24 m/min Table size: 800 x 450 mm Max. workpiece weight: 500 kg T-slot size: 18 mm Max. spindle speed: 10,000 rpm Spindle taper: SK 40 Spindle drive power: 18.5 / 12.3 kW Tool changer: 24-position Max. tool diameter: 70 mm Max. tool length: 250 mm Max. tool weight: 8 kg Hedpfx Aezx S Rpegtent Tool change time: 2.5 sec. Control: Siemens 810D / 840D Feed motor X / Y / Z: 3.5 kW Coolant pump standard: 0.53 kW Coolant pump high pressure: 3 kW Compressed air requirement: 6 bar Scope of delivery: Available manuals as shown in the pictures Available accessories as shown in the pictures Two vices as shown in the pictures Measuring probe Two cabinets with hinged doors and contents as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 3000 x 2500 x 2600 mm Weight approx.: 4000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►On request, we can offer transport to your desired location. ►The quoted price is net, plus VAT. ►The goods are sold excluding any warranty. ►Technical data subject to change. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, immediately available -Temperature 200°C, increase to 250°C possible upon request -Charging car, 5 units available, modification possible upon request -Homogeneous temperature distribution of +/- 10 °C -Internal dimensions W x D x H: 3750 x 1400 x 2300 mm -External dimensions W x D x H: 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with good sensor as cascade control -Temperature limiter -Signal tower -Directly accessible, with grid rails -Exhaust air volume flow 140 m³/min Hnodpfx Ajy Avqwsgtot -Electromagnetic door lock -Rated power 180 KW -Connection 241 KW!!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Ovens, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Fusing, Postcuring, Post-curing of liquid crystal windows, CFRP support structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Hnsdpfxez Ahrwe Agtst Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain