Ultrasonic cleaning system

AIR FRESH SERVICE INDUSTRIEFILTER 1 - Kammer

Condition: used, Year of construction: 1998, functionality: fully functional, 2 pieces vacuum drying oven GMP-compliant, Vötsch Industrietechnik (can also be sold individually). Material product-touched stainless steel 1.4435. Type of heating, externally heated hollow inserts, the ceiling is also heated, double-shelled with meander baffles inside, pressure-tight up to 3 bar. Heating via heating/cooling circuit (indirect heating using hot water) via separate DHW thermistats. Operating temperature max. 95°C, operating pressure inside tank 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Nledpeucdqnjfx Afrsi Insert trays: 1200 mm width x 950 mm depth Number of shelves: 13 pieces Covered area: 14.8 m2 Weight approx. 2900 kg per dryer Connections: Hot water connection (flow and return) Vacuum connection Heating of the vacuum drying ovens by means of a heating medium, e.g. water, connections at the rear. Heating of the heating medium by means of temperature control unit with control type 95-36-E Nominal voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating capacity can be reduced to 18 kW in a definable temperature range.

Condition: used, Year of construction: 1985, machine/vehicle number: 7458, Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2PBaujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Nsdpjp N T N Hefx Afreli Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2020, We don't get to use it in production, therefore the sale. Nlederq A Sxspfx Afrsi

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Nedpeizlh Hsfx Afroli Pick-up machine *

Condition: used, Year of construction: 2018, Lathes Travel distance X: 221 mm Travel distance Y :100 mm Travel distance Z: 400 mm turning length: 380 mm max. circulation diameter: 280 mm spindle boring: 65 mm input Power: 11 kW max. turning moment: 80 NM range of revolution from: 100 rpm range of revolutions till: 4500 rpm Control: Fanuc 0i-TF Powered tools: 12 working hours approx: 813 h control Fanuc Scrapper chip conveyor Nlodpfxsw Ekime Afrsi

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency safety switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L) Nedogllxgepfx Afrjli

Condition: new, We have different electronic parts for DMG machines, BOSCH,Siemens .... Nlodpfxoddxv Uj Afrsi On Your request I will send detailed photos of all parts.

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, functionality: fully functional, machine/vehicle number: 11779, turning length: 700 mm, turning diameter: 250 mm, spindle motor power: 26,000 W, spindle speed (min.): 3,200 rpm, spindle speed (max.): 3,200 rpm, spindle bore: 65 mm, overall weight: 8,500 kg, incl. 2x Hainbuch/Ortlieb chucks, conveyor belt, swiveling measuring probe with 2 heads, MANUAL GUIDE_dialog programming, high-pressure pump 18 bar/20 l/min, SBS tool breakage monitoring and wear control. Machine year 2013 – Commissioned 05/2014 Good & well-maintained condition Original price approx. €300,000 Nlsdpfxordy Uqs Afroi !!! ATTENTION -> Sale without loader!!!

Year of construction: 2012, condition: ready for operation (used), Clamping force: 62.5kN, opening stroke: 110mm, ejector force: 6.4kN, ejector stroke: 60mm, platen distance: 119mm-229mm, mold carrier (fixed): 247mm/172mm, mold carrier (movable): 128mm/155mm, screw diameter: 12mm, injection volume: 6.8cm³, injection pressure: 1360bar. Machine dimensions X/Y/Z: approx. 700mm/1200mm/1650mm, weight: approx. 350kg. Documentation available. On-site inspection is possible. Njdpfxswyxa No Afrjli

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case Nlsdpepbbc Hjfx Afrei