Used Hydraulic Notching Machine With Angle Adjustment, Angle Shears, Notching Press, Notching Shears for sale (86,838)

Condition: good (used), Year of construction: 1986, Max. working width: 4000 mm for sheets with tensile strength of 40 kg up to: 3 mm Table width: 470 mm Backgauge adjustment: 1000 mm Fixed cutting angle: 1°30' Frame throat depth: 200 mm Hydraulic drive: 380 V, 7.5 kW Required space: 4650 x 1830 x 1420 mm (height) Weight: 5.7 t Bljdpfx Acey A Eg Ujnsl

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf Bjdpfxszxxi Se Acnsll

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Bodpfx Asxpqy Dscnsll Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm Blodpfx Ashhc Ixocnsl - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: INV 42, The shears were purchased new from China in 2012. The machine is in fully working condition but has not been used for the past 5-6 years. It has been replaced by laser cutting machines. Metal cutting shears from China Country of origin: China Year of manufacture: 2009 Maximum cutting length: L=3200mm Bledpfezwvwkex Acnsl Maximum sheet thickness: 12mm, at a tensile strength of 500N/mm2 Model: Y160L-4 Main motor power: P=15kW Number of strokes during normal operation: n=10/minute Pump pressure: Pp= 31.5 Mega Pascals Pump capacity: V= 40l/min Minimum sheet thickness for cutting: 0.5 mm Machine weight: 9,600 kg

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Blsdpfxjy S A Nfj Acnol

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Bodpfx Acszt H Uxensll Pressure: 3 tons Made in Germany.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 150042, Offer 25328 Technical Data: - Max. cutting width: 3200 mm - Max. cutting capacity at 45 Kp/mm²: 12 mm - Frame throat depth: 175 mm - Cutting angle: 1.48° - Manual blade gap adjustment - Number of hold-downs: 13 units - Strokes per minute: up to 10 1/min - Front squaring arm approx.: 1100 mm - 2 front support arms approx.: 1100 mm each - Motorized back gauge with positioning control up to: 1000 mm - Rear area safety with light barrier - Cutting line illumination - Working height: 860 mm Bjdpfjxl Rypjx Acnsll - Electric foot pedal - Drive: 400 V / 19.5 kW - Space requirements (approx.): W 4150 x H 2150 x D 2300 mm - Weight (approx.): 8.5 t

Condition: good (used), Year of construction: 1997, functionality: fully functional, oil tank capacity: 220 l, pressure: 300 bar, ID43737 Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses Bledpfx Ajwhcmpscnel 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 60 tonnes at 300 bar 5 units with 80 ton force PH800 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Bodpfx Aexdmgvscnjll Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Bedpfezvfp Hox Acnsll Post-travel: max. 10 mm Motor power: 3 kW

Condition: good (used), Year of construction: 1988, machine/vehicle number: 053-019/35, Offer 24591 Technical specifications: - Maximum press force 25 t - Maximum ram stroke 500 mm - Stroke speed 0 - 40 mm/s - Return stroke 0 - 200 m/min - Installation height 800 mm - Throat to ram center 360 mm - Ram clamping area 440 x 360 mm - Ram clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm Blsdpfxjwd Nybs Acnel - Deep drawing force 10 t - Maximum deep drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain Bljdpfjx I I Uxjx Acnol

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11.205.6002, control type: PLC-controlled, working width: 6,100 mm, sheet thickness (max.): 10 mm, power: 45 kW (61.18 HP), overall weight: 40,000 kg, total length: 70,000 mm, total height: 3,500 mm, Equipment: emergency stop, type plate available, used Helmut Lotze hydraulic plate shear Blsdjy Tixpepfx Acnel Price negotiable

Condition: used, The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Bedpozukivofx Acnsll Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 840kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), DEM GP4520 APM Angle Sealer with Shrink Tunnel Made in France. The machine is in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply insert the product into the packaging and the machine does the rest. Machine parameters are set from the control panel, including sealing time, material feed time, sealer open time, conveyor belt speed, etc. Sealer dimensions: 470 x 555 mm Weight: 400 kg Power supply: 380V Installed power: 8 kW Capacity: 900 pcs/h Bledpfxjzurzms Acnsl

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Bedpfx Ajhtq N Necnoll Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: as good as new (ex-display), plate thickness 2.0 mm tube diameter max. 60.0 mm motor 400 Volt Blodpfxjw U U Tye Acnel

Condition: good (used), functionality: fully functional, pressing force: 160 t, table width: 1,250 mm, throat depth: 500 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Thrust 500 mm Blodpfxszucq Es Acnjl Installation height max. 480 mm Weight approx. 11.2 tonnes Output 30 kW Area of application: universally applicable machine: Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools .

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons Blodpfx Asyzd I Ujcnjl -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm Bledpfx Acezqhdionel * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 Bljdpfx Aozry Icocnol - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, Technical details: Bljdpfozvnrdex Acnel Pressure: 60 t stroke: 400 mm table surface area: 700 x 700 mm passage opening in table: Ø 100 mm distance between columns: 700 mm distance between columns: 700 x 1300 mm table height over floor: 850 mm dayligth: max. 1150 mm daylight dimension : table/slide up: 400 - 800 mm cylinder diameter: Ø 110 mm total power requirement: 4,8 kW machine weight approx.: 930 kg dimension machine approx.LxWxH: 1,2 x 0,7 x 3,0 m HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 120 mm Hydraulic unit *

Condition: used, ---SOMO HYDRAULIC SHEAR 3000X6 (WHITE), MOTORIZED REGISTER, 200 mm RECESS, DIMENSIONS: 3600X1900X2000(H) mm, WEIGHT 5800 KG ---SOMO HYDRAULIC SHEAR 3000X6 (BLUE), MOTORIZED REGISTER, 300 mm RECESS, DIMENSIONS: 3900X2000X1900(H) mm, WEIGHT 7400 KG Bjdpfx Aswn D Etjcnjll

Condition: used, Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, cutting force: 800 t, total width: 6,400 mm, total length: 18,500 mm, total height: 4,600 mm, overall weight: 153,000 kg, year of last overhaul: 2024, Hydraulic scrap shear Taurus In very good condition. Bjdpjzudwaofx Acnoll