Used Gericke Sieve for sale (387)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 8,685 mm, total width: 2,550 mm, total height: 3,970 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center axle trailer Fine-grained steel welded construction Outer frame slightly angled with "Load-Lock profile" for attaching tie-down straps. Note: To attach the straps, the side panels must be opened! "Vario-Lash" lashing rings for use in the "Load-Lock profile", 2.5 tons each, loose Gear-supported front legs, with a straight lower part and single-sided operation on the right Telescopic rear support Retractable ladder at the rear Door latch on the side Chocks with holder Aluminum side impact protection Steel underrun protection Quarter panel fenders in front of and behind each axle Rear impact protection Plastic toolbox with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Coupling device for center axle trailer, according to customer requirements Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle EBS, electronic braking system with EBS plug at the front, with connection cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle – driving stability system Wheels and tires 385/65 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Nsdpfjzcqh Njx Alnecu Platform length approx. 6,900 mm Front bulkhead / corner posts at the front 2,580 mm high, steel corner posts in a full-volume design, release mechanism for side tarpaulin on the front bulkhead Center posts Sliding posts, can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom Insertion slats Rows of aluminum V-insertion slats Rear bulkhead / corner posts at the rear Rear corner posts, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioner Rear portal doors, 2-wing, each with 2 internal rotating bar locks Tarpaulin Tarpaulin with welded horizontal and vertical straps Tensioners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Fixed roof with tarpaulin and bows, tarpaulin color: white Optimal rain gutter at the rear, at the top of the end bow, above the doors Registration country / signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Load securing certificate according to EN 12642 XL 24/7 service hotline prepared for license plate holder, single row Reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the corners (if visible side panels, then the strip at the bottom, on the side panels) Reflective strips: red, around the rear portal *also available as a drive-through version Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Type: TPS 118 Logistics Semi-Trailer Chassis: Central Axle Trailer Outer frame slightly inclined, new design with "Load-Lock profile" for securing tie-down straps 2-speed gear support leg at the front Plastic toolbox Platform height: 1080 mm Coupling: Central axle trailer Drawbar with tested 40 mm drawbar eye, logistics version Drawbar mechanically adjustable in height via threaded spindle, below floor level, max. adjustment range 200 mm Drawbar mechanically adjustable in length from approx. 1950 - 2300 mm, can be mechanically locked at approx. 50 mm intervals, drawbar length set to approx. 2100 mm Axles & Suspension SAF/BPW axles, selectable by the manufacturer "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking System 2-line pneumatic braking system Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle 24 Volt EBS, electronic braking system with EBS plug at the front, with connection cable with raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 4x 235/75 R17.5, brand selectable by the manufacturer 4x steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length: approx. 7,300 mm Superstructure Front wall / corner posts at the front Through-loading system with front portal doors, 2-leaf, each with 2 internal rotary bolt locks, corner posts made of steel, release mechanism for side tarpaulin Ramp, approx. 2,400 mm wide, 1 x divided, approx. 350 mm long for resting on the tailgate, load capacity approx. 1,800 kg, incl. support for the tailgate (drawbar length then approx. 2100 mm, for tailgate length of 1800 mm, the coupling offset from the truck must be at least 20 to max. 240 mm). Note! Usable internal length is reduced by the ramp! Side Walls Center Rails 2 pairs of sliding rails that can be moved along the entire length, with 4 pockets and a long pocket at the bottom Insert strips 5 rows of wooden insert strips (in combination with side walls, 4 rows) Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel, extending to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf, each with 2 internal rotary bolt locks Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Ncjdpfx Ajzcp E Tslnou Tensioning fasteners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Sliding tarpaulin, rear end lift that can be folded up, with the tarpaulin sliding from back to front, tarpaulin color: white Optimal rain gutter at the rear, above at the end beam, above the doors Country of Registration / License Plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Fliegl manufacturer certificate for the structural strength of the superstructure according to EN 12642 XL prepared for single-line license plate holder Reflective strips: white, continuous on the bottom of the side tarpaulin and at the top in the corners Reflective strip

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder Nsdpfx Alezarc Asnocu • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Nodpfx Alsv Rpnmonecu Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Nedev Rmvzspfx Alnocu Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: used, Year of construction: 2004, Screen changer EREMA SW8/134 RTF Continuous partial area backwash filter with 4 carrier pistons (8 sieves) for heavily contaminated polymers Minimal pressure differences when backwashing or changing sieves The melt filter system meets the highest demands for fine filtration and is characterized by robustness, a high degree of automation and maximum availability, plus improved homogenization of the melt Main components: 1x continuous 4-piston backwash filter 1x control monitoring unit 1x operating unit for filter change 1x hydraulic unit System features: - Sieve diameter Ø 134mm - Active sieve area 1128cm² - fully automatic rinsing processes without interrupting production - Technical documents - Year of manufacture 2004 Subject to prior sale Please only send inquiries by email Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize the shipping. This is not part of the offer price. Nsdpfx Aleualaljnocu

Condition: used, machine/vehicle number: WFDFLT33902030001, empty load weight: 6,075 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, total length: 13,850 mm, total width: 2,550 mm, total height: 3,940 mm, suspension: air, tire size: 435/50 R19,5", Please note: The images shown are archive images. The vehicle may still be in use. "Preload" – slight preload in the neck area, drawbar coupling with a replaceable 2" kingpin, outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps, 24 tons, 2-speed landing gear, single-sided operation. Door lock on the side, support wedges with holder, aluminum side impact protection, galvanized steel under-ride protection, quarter-panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, pallet stops on both sides, approx. 15-20 mm high, in bolted design, loading height reduced by approx. 15-20 mm, plastic tool box with drawer and insert, b=650 / h=520 / d=670 mm. Axles + Suspension SAF disc brake axles, "axle/chassis laser-measured" – reduces tire wear and fuel consumption, air suspension, 1st axle is an automatic lift axle, including forced lowering and start-up assistance, axle lift below the recommended driving height. Braking system 2-line compressed air braking system, spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: with lift and lower valve, ride height in connection with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm. Wheels and Tires 435/50 R19.5", steel rims. Electrical System 24 Volt, multi-chamber lights, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connection cable. Floor Sieve-printed panels, approx. 30 mm thick, on longitudinal supports for high point loads, for forklift axle load up to a maximum of 7100 kg. Front Wall / Front Corner Posts 2580 mm high, corner posts made of steel in a box-section design, release mechanism for side tarpaulin on the front wall. Intermediate Posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom. 3 pairs of post positions Insertion strips 5 rows of aluminum insertion strips + Vario strips. Rear Wall / Rear Corner Posts Rear corner posts made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Tarpaulin Tarpaulin with welded-in horizontal and vertical straps, tensioning closures made of stainless steel. Ncodpfozcmmzsx Alnsu Roof Fliegl-Blitz sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2490 mm, tarpaulin color: white (in connection with the sliding tarpaulin, without running carriage at the front). Country of Approval / Plates Germany, type approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for body strength according to EN 12642 XL, Fliegl manufacturer's certificate for body strength according to DL 9.5, pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm, Fliegl manufacturer's certificate for load securing according to VDI 2700 Sheet 12 ff., pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm, prepared for license plate holder, single row, warning sign according to ECE - 70, reflective strips: white, continuously on the lower part of the

Condition: used, Sieving bucket / bucket / OQ65 / 1,170 mm For inquiries regarding attachments, Mr. Herden is available to assist you (please call ). Sieving bucket / bucket / OQ65 / 1,170 mm / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross Ncedpfx Aszckpyjlnou - Cutting width (mm): 1,170 - Weight (kg): 830 Equipment: - Incl. OQ65 mount In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! Internal ID: 1U330 = Further information = Intended use: Construction Unladen weight: 830 kg Please contact Marius Herden for further information.

Condition: used, Year of construction: 2024, operating hours: 435 h, power: 175 kW (237.93 HP), empty load weight: 15,000 kg, Operating hours: 435, First registration: 24.10.2024_____ Two-engine version with JCB 55 kW / Stage 5. Dual-sided dirt pickup, towed. Basic equipment sweeper. Controls: The main control panel is mounted in the center of the cab with a JVM for displaying information on a wide range of sweeper functions, plus download capability for recorded data. Additionally, images from up to four cameras can be displayed on the JVM screen. A separate control console with palm rest for main sweeping functions is mounted on the door side. Suction fan: Variable suction speed from 1,800 rpm to 3,500 rpm, adjustable for different applications. V65t: Higher gear ratio: 1.79:1. Disc brush (gutter brush): Quick-change brush system with variable sweeping speed up to 160 rpm (adjustable from cab). Highly visible signal-yellow brush disc and hose routing. Suction mouth: Aluminum suction mouth with 250 mm inlet diameter and tool-free adjustment. Dust suppression system: Spray heads for dust control located at suction nozzles, disc brushes, and along the vehicle front. "Pressadrain" water reclamation system. EUnited 4-star PM10 certificate. Electrical system: 24 V. All external wiring harness connectors meet IP67 protection standards. External noise / Sound power level: LWA 108 dB(A) for engines with standard power, measured to EC directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured to EC directive 2000/14/EC. Debris container: The superstructure comprises debris container and integrated water tank, made from high-strength Inox steel. Waterproof rear door locking system with safety lock and drainage function. Two side maintenance doors and side storage compartments. A water strainer allows the debris container to be used as a large water tank for street washing. Standard equipment includes rear dump hatch, automatic multi-stage debris container support, two protected rear beacons, and LED work lights. Container volume: 6.5 m³. Tipping angle: 54° (nominal). Door opening angle: 125° (nominal). Water tank: The baffled water tank can be filled by a Type 'A' hydrant. The double-membrane pump is suitable for continuous duty and even dry run operation. Water volume: 1,545 l (optional 2,000 l). Exhaust hood: The smooth-surfaced exhaust hood is lined with frequency-tuned sound insulation. Brush: Roller brush Ø 406 mm. Roller brush width: 1,275 mm. Suction mouth width: 750 mm. Disc brush: 500 mm (opt. Ø 650 mm). Special equipment sweeper: Auxiliary engine: JCB 55 kW turbocharged, low emission to Stage 5, REQUIRES EN590 (or similar) LOW SULPHUR FUELS. Sweeping units configured for right-hand operation. Final assembly on customer-supplied MB Atego 1324. Pneumatic raising and lowering of the air guide sieve in the dirt container. Pneumatic shaker device for air guide sieve. Chain curtain in dirt container ahead of air guide sieve. Water tank connection coupling Type A, Storz 2 1/2 inch. Dirty water drain screen with graduated perforation mounted on rear door enables efficient... Njdewxn Uajpfx Alnscu

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, first registration: 06/23/2016, self-propelled. Standard basic equipment: Fan unit - fan drive hydraulically via the auxiliary drive located on the chassis, independent of the transmission (semi-hydrostatic drive) - hydraulic fan drive - hydraulic oil tank 50 l - engine compartment with noise-reducing material - fan exhaust duct leading upwards through the container front - hydraulic pump, single sweeping material container - sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel - engine compartment cladding made of normal steel - sweeping material container gross volume 6.5 m³ - sweeping material container floor made of chromium alloy stainless steel, 1.4301 - sweeping material container tilting angle approx. 55 degrees - dirt chute made of chromium steel, 1.4003 - inspection flap on the right and left - dirt water drain 4", A-coupling - air intake screen, manually foldable - 2 rear warning lights on the sweeping material container - air shut-off on the suction hose, pneumatically operated - multi-stage locking support, pneumatically operated - marker lights on the container rear, side marker lights - integrated water tank - preparation for rear suction hose boom or mounted on the roof - side marker lights. Sweeping material intake: Sweeping material intake, wear-resistant coating - coarse intake by tilting the suction nozzle - suction hose diameter 250 mm - disc brush, pushed - hydraulically driven disc brush, steel - disc brush, steel, diameter 500 mm, pulled - stepless speed control for disc brush - two robust, pivoting trailing wheels - automatic lifting of the sweeping units when reversing - work lights for sweeping unit. Roller brush: Roller brush suspension, pulled - brush length 1,300 mm, brush diameter 406 mm with plastic trim (chassis-dependent) - hydraulically driven roller brush - throw limitation apron for roller brush unit. Water system: Water tank volume approx. 1,554 l - water container made of chromium steel, 1.4003 with coating - water level indicator in the driver's cab - water filling device, Storz C (2"), right - manual water filling device, right and left - water pump, hydraulically driven - automatic water stop when the sweeping units are lifted - spray water connection, 3/4", rear right - water blowing system - electric water valves in the driver's cab - 2-jet nozzle bar, low pressure, front. Instrument panel and control panel: Bucher instrument panel, incl. 7" color display - ergonomic control unit, mounted on the driver's door, equipped with the main functions - display includes the following functions: water level indicator, operating hours and rear axle load - warning and control lights for rear axle load - control and regulation unit for regulating the brush pressure (brush relief), stepless speed control of the disc brushes - electric valves for water system, operation in the driver's cab - operation of the dirt container functions by means of a cable remote control from the driver's cab, but also possible from the outside - operation of the air intake screen, operation on the rear right of the vehicle - overload indicator for rear axle load, warning light in the display (optional). Nedpfx Asfy Am Uolnocu

Condition: used, mileage: 122,506 km, power: 175 kW (237.93 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 6,380 kg, maximum load weight: 4,120 kg, overall weight: 10,500 kg, axle configuration: 4x4, wheelbase: 3,300 mm, brakes: engine braking, color: grey, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,460 mm, loading space height: 1,760 mm, Equipment: ABS, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, traction control, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 122,506 kilometers * 4 x 4 all-wheel drive with drop-in tires * Ideal for conversion into a motorhome/expedition vehicle * Can be unloaded to 7,490 kg Ncjdpfevhp Uuex Alnou * Complete documentation and test books available * Aluminum body 4.30 m with standing height * Sortimo shelving system * Workshop equipment * Sieve pressure floor * DIN lashing eyes * Sockets * Interior lighting * Interior dimensions 4.30 m x 2.46 m x 1.76 m * Staircase can be slid underneath * Accessible box roof * Restraint system for superstructures on the roof * Trailer coupling * Trailer load: 13,500 kg * Additional ball head trailer coupling 3,500 kg * Leaf suspension front and rear * Driver's cab with 3 seats * Auxiliary heating * Air-sprung driver's comfort seat * 6-speed manual gearbox * Differential lock * Hill start assist * Multifunction steering wheel * Engine brake * Stereo CD * CB radio * Wheelbase 3.30 m * 10,500 kg gross vehicle weight * Unladen weight 6,380 kg. * Payload 4,120 kg. * the total weight is 10,500 kg, - the buyer can reduce the weight to 7,490 kg If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 122,506 km, power: 175 kW (237.93 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 6,380 kg, maximum load weight: 4,120 kg, overall weight: 10,500 kg, axle configuration: 4x4, wheelbase: 3,300 mm, brakes: engine braking, color: grey, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,460 mm, loading space height: 1,760 mm, Equipment: ABS, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, traction control, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 122,506 kilometers * 4 x 4 all-wheel drive with drop-in tires * Ideal for conversion into a motorhome/expedition vehicle * Can be unloaded to 7,490 kg. * Complete documentation and test books available * Aluminum body 4.30 m with standing height * Sortimo shelving system * Workshop equipment * Sieve pressure floor * DIN lashing eyes * Sockets * Interior lighting * Interior dimensions 4.30 m x 2.46 m x 1.76 m * Staircase can be slid underneath * Accessible box roof * Restraint system for superstructures on the roof * Trailer coupling * Trailer load: 13,500 kg * Additional ball head trailer coupling 3,500 kg * Leaf suspension front and rear * Driver's cab with 3 seats * Auxiliary heating * Air-sprung driver's comfort seat * 6-speed manual gearbox * Differential lock * Hill start assist * Multifunction steering wheel Ncedpfxsvhp Uhj Alneu * Engine brake * Stereo CD * CB radio * Wheelbase 3.30 m * 10,500 kg gross vehicle weight * Unladen weight 6,380 kg * Payload 4,120 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, Korn-KALI® 38+6 Potassium chloride with added magnesium salts MINERAL FERTILIZER K2O (MgO, SO3) 38 (6, 12) Declaration of nutrient content (m/m) • 38 % K2O water-soluble potassium oxide (= 31.5 % K) • 6 % MgO water-soluble magnesium oxide (= 3.6 % Mg) • 12 % SO3 water-soluble sulfur trioxide (= 4.8 % S) Particle size Granules. 95 % of the product passes through a sieve with a mesh size of 4.8 mm. Ingredients • Potassium chloride (KCl), CAS No. 7447-40-7 • Sodium chloride (NaCl), CAS No. 7647-14-5 • Magnesium sulfate monohydrate (MgSO4 • H2O), CAS No. 14168-73-1 All ingredients are "primary raw materials and mixtures" (CMC 1). Ncedpfx Alozb Rlfjneu Instructions and dosages: For professional use only! Crop Yield Amount • Cereals average yield 200-350 kg/ha • Cereals high yield 250-450 kg/ha • Rapeseed average yield 230-600 kg/ha • Rapeseed high yield 150-700 kg/ha • Sugar beets average yield 350-1000 kg/ha • Sugar beets high yield 450-1200 kg/ha • General recommendations are based on an average level of nutrient availability in the soil. • Recommended for soil application. • Suitable for crops that tolerate chlorides. Recommended storage conditions • Protect fertilizer stock with a tarpaulin. • Store in a cool (< 30 °C) and dry place! Safety and environmental information • To avoid hazards to human health and the environment, follow the instructions for the recommended use of this fertilizer product. Comply with local legal requirements! The stated price applies to a quantity of 1000 kg EXW, and transport costs are determined individually. Minimum purchase quantity: 24,000 kg.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Ncsdpfx Aozb Iu Dslnou Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Nedpfx Aozb Ikfjlnscu Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: excellent (used), CATALOG NUMBER 7899 Technical data: - Chipper intake section: 410mm x 180mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve size: 60x60mm - Upper feed roller, toothed - Lower feed rollers: 2 units, toothed - Infeed belt length: 2180mm - Infeed belt width: 400mm - Autoreverse (adjustable) Nedpfszadvhox Alnjcu - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4300x1600x1100mm - Weight: approx. 2000kg ADVANTAGES – Italian manufacture – Non-painted – Electric adjustment of body height – Used multi-blade saw, very good condition Net price: 69,900 PLN Net price: 16,640 EUR with the exchange rate of 4.2 (Prices subject to change with significant fluctuations)

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm Nedpfx Alezadb Renjcu - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7610 Technical data: - Inlet width: 410mm - Inlet height: 140mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 80x130mm - Top: single driven, toothed shaft - Bottom: 2 driven, toothed shafts - Infeed belt length: 2850mm - Infeed belt width: 390mm - Autoreverse - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4800x1550x1200mm - Weight: approx. 2200kg ADVANTAGES – Manufactured in Poland Ncodoy Uxitspfx Alneu – Autoreverse – Equipped with conveyor – DTR technical documentation – Used chipper, very good condition Net price: 75,900 PLN Net price: 18,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1996, Wood chip screening system Manufacturer - Andritz Group, Model: Konewood CS600 Ncodpsxn T R Asfx Alnju Screen capacity: 400-675m3/h Sieving sawdust and shavings from wood chips Conveyors. Steel Structures: – Steel support structures for screens and conveyors – Ladders and walkways for operation and maintenance

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit Ncsdsx Rq Slspfx Alnsu with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images! The vehicle may be in use! Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm. BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h). Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Nedskyrmiepfx Alnscu Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. Nedpfxsxb D Swe Alnocu 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT34202038273, empty load weight: 5,680 kg, maximum load weight: 29,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 2,680 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: silver, Chassis, semi-trailer, logistics company Fine-grained steel welded construction in reinforced Scandic design, kingpin plate with replaceable 2" kingpin Outer frame in low-bed design: 7 pairs of lashing points embedded in the top and side of the outer frame, each with a capacity of 10 tons 10 pairs of combination pocket lashing points with ring lashing eyes (bolted) embedded in the outer frame, each with a capacity of 5 tons, approx. 72 x 42 mm internal dimensions Outer frame with "Load-Lock profile" for securing lashing straps, with a hole approximately every 400 mm 24 ton, 2-speed landing gear, single-side operation Free swivel radius to the support foot approx. 2500 mm, support foot dimension approx. 2600 mm, extendable ladder at the rear 2 chock blocks with holder Aluminum side impact protection Steel under-run protection, galvanized Spray guard at the rear, covering the entire width Quarter panel fenders in front of and behind the axle assembly with anti-spray splash guards, only on the last axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable in front of the axles, 1x on the left and 1x on the right 1 storage box across the entire width, closed, below the loading area, approx. w=450 mm/h=400 mm/d=2460 mm mounted directly in front of the axles 3 lashing/stanchion rails with 4 pairs of locking cutouts embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 1782 mm), approx. 80 mm high. With cutouts at the top and bottom for lashing and inserting stanchions 80 x 80 mm. At the bottom, an angled sheet is used as a stop, open to halfway down. Combined design for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters 10 combination stanchions with cutouts at the bottom, w=80/ d=50/ l=1200 mm 6 stanchions, w=80/ d=80/ l=1200 mm, hot-dip galvanized Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension Ncsdpfx Aezbbpuslnou 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting assistance Braking system 2-line pneumatic braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front 24 Volt EBS, electronic brake system with EBS socket at the front Caution: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab Wheels and tires 385/65 R22.5" Steel rims "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side yellow LED lighting on the side, linked to the turn signal "flashing side marker lights" 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 2 additional LED work lights at the rear 1 LED roof marker light with holder 2 pairs of warning signs, LED illuminated and extendable to 3,000 mm 2 additional LED work lights at the top of the front panel additional 7-pin socket in the under-run protection at the rear Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 7,900 kg "Premium floor sealing" Floor sealed around the entire perimeter F

Condition: used, Year of construction: 2021, Sinterit Multi PHS + Sandblaster – Accessories as Shown in the Photos, No Vacuum Cleaner, 2021 The Sinterit Multi PHS (Powder Handling Station) with Sandblaster is a professional post-processing solution designed for SLS 3D printing applications. It supports an efficient workflow for powder removal, material handling, and part cleaning, helping improve cleanliness and convenience during post-processing. This offer includes the Sinterit Multi PHS, Sandblaster, and accessories as shown in the photos. Please note that the vacuum cleaner is not included. Production year: 2021. Key features: Professional powder handling and post-processing station for SLS printing Supports powder cleaning, sieving, and part finishing processes Includes Sandblaster for surface cleaning and finishing Accessories included as shown in the photos Industrial-grade design suitable for professional use Nsdpfx Aeywurvslnecu Included in the offer: Sinterit Multi PHS Sandblaster Accessories as shown in the photos Vacuum cleaner not included

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum Nodpfx Aljza A Txjnecu