Used Foets F25 for sale (167)

Condition: new, Immediately available Fassi cranes in the respective variants: - Fassi F135 A.0.24 (4-stage hydraulic extension) - Fassi F235 A.2.24 (4-stage hydraulic extension) - Fassi F235 A.2.26 (6-stage hydraulic extension) - Fassi F255 A.2.24 (4-stage hydraulic extension) - Fassi F255 A.2.26 (6-stage hydraulic extension) - Fassi F545 RA2.28 (8-stage hydraulic extension) incl. additional support outriggers Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for, e.g., grapple or clamp (5th & 6th control circuit), except for the F545 - Hydraulically operated outriggers, controllable via remote control Lrsdpfx Aozln Ttsb Aeu - LED work lights - Scanreco remote control with cross lever, charger, and carrying straps - Electronic overload cut-off system - Emergency stop and optical alarm (90% and 100%), including adjustable digital swing limit - FASSI stability control FSC including LMB II - From F235 size onwards, double knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th stages available at an extra cost (can be ordered individually for each crane) - For the Fassi F545 series = Includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible through one of our financing partners. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further information = Price: On request

Condition: new, Immediately available Fassi cranes in the respective variants: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) including additional support legs Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for, e.g., grab or clamp (5th & 6th control circuit), except for F545 - Hydraulic outriggers operated via remote control - LED work lights - Scanreco remote control with cross lever, charger, and carrying straps - Electronic overload protection system - Emergency stop and optical alarm (90% and 100%) including adjustable digital swing limiter - FASSI stability control FSC including LMB II - From F235 model size: double knuckle lever system with overextension of the boom up to 15° - Manual extensions for the 5th and 6th section available at an extra charge (can be individually ordered for each crane) - For the Fassi F545 series = includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request Lodjzln Tyjpfx Ab Aoru

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Lrsdpfx Aszu Nyasb Asu Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Year of construction: 1984, condition: used, Copy milling machine Rotox Ledpfxsillylo Ab Aeru Type KF 257

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, empty load weight: 16,128 kg, maximum load weight: 9,872 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, next inspection (TÜV): 01/2027, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,800 mm, loading space width: 2,380 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, with accommodation, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (Anti-lock Braking System), traction control system (ASR), constant throttle, power take-off, differential lock, fog lights, work lights, storage box, leaf suspension, trailer coupling air-light-hydraulic, lashing eyes, underrun protection, swing tailgates, roof hatch, crane behind cabin, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, four hydraulic extensions, green environmental sticker. Lrodpfx Absycgqgj Aeu Wheelbase: 3,900 mm. Body: 3-way tipper body with pneumatic tailgate operation, drop sides/rear wall & F255A.2.24 xe-dynamic crane, remote control. 9t front axle, rear axle planetary gear 13.4t, electronic braking system with ABS and ASR, ABS deactivatable, disc brake with full protection on front axle, drum brake on rear axle, condensate monitoring for compressed air system, electronic parking brake, stabilizer on front axle, reinforced stabilizer on second rear axle, residual heat utilization, construction site air filter, seat belt monitoring, smoker package, PSM 2nd generation, reversing warning system, ClassicSpace, light and rain sensor, comfort closing system, off-road driving program, Mercedes PowerShift 3, PowerShift Advanced, navigation system, multimedia cockpit, preparation for toll logging, daytime running lights, high performance engine brake, MB 124-10c MPA N-/M drive speed PTO, grounder, transmission oil cooling, ESP, lane keeping assist, traffic sign assist, Active Brake Assist 5. Load diagram: 3m-6150kg, 4.45m-4650kg, 6.45m-3115kg, 8.45m-2280kg, 10.60m-1775kg, 12.70m-1415kg, mechanical extension up to 19.25m-700kg possible for an additional charge! New vehicle from stock available with one-day registration in 01/2026! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side Ljdpfx Abey Ehcds Asru - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, empty load weight: 15,500 kg, maximum load weight: 9,872 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, next inspection (TÜV): 01/2027, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, metallic cab, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), ASR (traction control), constant throttle, PTO, differential lock, fog lights, work lights, storage box, leaf suspension, trailer coupling (air, electrical, hydraulic), lashing eyes, under-run protection, hydraulic transverse locking, roof hatch, crane behind cab, emergency stop, grab control, foldable, 2-point hydraulic outriggers, radio remote control, four hydraulic extensions, green environmental badge. Wheelbase: 3900 mm. Body: 20t hooklift system Hyva 20-47-S for containers up to 5.7m & crane F255A.2.24 xe-dynamic, remote control, 9t front axle, rear axle crown wheel (planetary) 300, 13.4t, electronic brake system with ABS and ASR, deactivatable ABS, disc brakes with full protection on front axle, drum brakes on rear axle, condensate monitoring for compressed air system, electronic parking brake, stabilizer on front axle, reinforced stabilizer on second rear axle, residual heat utilization, construction site filter, seat belt monitoring, smoker package, PSM 2nd generation, reverse warning system, ClassicSpace, light and rain sensor, comfort locking system, off-road driving program, Mercedes PowerShift 3, PowerShift Advanced, navigation system, multimedia cockpit, pre-installation for toll recording, daytime running lights, high performance engine brake, PTO MB 124-10c MPA N-/M speed, grounder, gearbox oil cooling, ESP, lane keeping assist, traffic sign assist, Active Brake Assist 5. Load chart: 3m-6150kg, 4.45m-4650kg, 6.45m-3115kg, 8.45m-2280kg, 10.60m-1775kg, 12.70m-1415kg; mechanical extension up to 19.25m-700kg available at extra cost! New vehicle in stock with day registration in 01/2026! Lredpfjyyc Hmsx Ab Aju On request and at extra cost, also available with a different hooklift system! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x6, wheelbase: 3,900 mm, next inspection (TÜV): 01/2027, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, crane, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, with integrated sleeper cab, one comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric windows left and right, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off, differential lock, fog lights, beacon, storage box, leaf suspension, trailer coupling with air, light, and hydraulic connections, underride guard, hydraulic lateral locking, roof hatch, crane mounted behind cab, emergency stop, grab control, foldable, hydraulic 2-point outrigger, radio remote control, four hydraulic extensions, green environmental badge. Wheelbase: 3,900 mm. Body: 20t Hyva 20-47-S hooklift system for containers up to 5.7m & F255A.2.24 xe-dynamic crane, radio remote control. 9t front axle, rear axle with 300 planetary gear, 13.4t, differential lock on front and rear axles, electronic braking system with ABS and ASR, ABS deactivatable, drum brakes on front and rear axles, condensate monitoring for compressed air system, electronic parking brake additionally on front axle, secondary water retarder, stabilizer on front axle, reinforced stabilizer on second rear axle, residual heat utilization, construction site filter, seat belt monitoring, smoker package, additional hot water heating, PSM 2nd generation, reversing alarm, ClassicSpace, light and rain sensor, comfort locking system, offroad driving program, Mercedes PowerShift 3, PowerShift Advanced, navigation system, multimedia cockpit, preparation for toll system, daytime running lights, high performance engine brake, MB 124-10c MPA N-/M-speed PTO, Grounder, transmission oil cooling. Load diagram: 3m-6150kg, 4.45m-4650kg, 6.45m-3115kg, 8.45m-2280kg, 10.60m-1775kg, 12.70m-1415kg! Lrsdpfx Abey Dr R Ns Aju New vehicle from stock with day registration in 01/2026! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 400 mm A-axis: -170° to +170° X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Lredpfx Aszwmx Ejb Aou Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg

Condition: used, The Modul KF 250 HSC bevel gear milling machine was designed as a universal machine for flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Technical data: Gear diameter: 300 mm Lrjdpfxoxz Eg Aj Ab Aeu Max. module: 10 Tooth width: 60 mm Space required approx.: 4.2 x 2.6 x 2.2 m Machine weight approx.: 11,000 kg *The image shows the machine in its current condition as a used machine. Upon request, it can be offered partially modernised or as a complete retrofit, fully modernised with new CNC control (SIEMENS ONE).

Condition: new, bore capacity in steel (diameter) 25 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK 3 spindle turning speed range 50 - 3000 U/min 280 mm 155 mm table surface area 500 x 180 mm connected load frequency 230 V max. distance between table and spindle-nose max. 320 mm total power requirement 0,8 kW weight of the machine ca. 150 Kg Ljdpfovdldwox Ab Ajru dimensions of the machine ca. 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump Ledpfxeypci Ss Ab Asru -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Condition: used, current intensivity 1,2 / 0,5 A wire dia. 0,8 - 1,6 mm IP protection class IP 43 dimensions 250x210x190 mm Ledpfxozhxmco Ab Ajru speed 1 - 25 m/min weight ca.7,2 kg High-precision wire feeder for automated MIG/MAG robotic applications, optimized for use with the i-Series digital power sources 4-roller drive for constant wire feed Mains voltage tolerance: +/-10% Current consumption: 1.2 A / 0.5 A Fuse: 3.15 A slow-blow Type A residual current device Wire speed: 1–25 m/min Rotary drive: 4-roller drive Wire diameter: 0.8–1.6 mm Quick and secure connection of hose assemblies using the Dronius System Connector FSC Only 2 left in stock! PLEASE NOTE: Only the wire feeder is sold here—not a welding machine! Translated with (free version)

Condition: used, diameter 250 mm boring diameter / mm - / hollow 65 mm Forkardt power chuck including flange Type: 3NHF250-65-Z8-S12 nmax: 4500/min Ljdpfx Asy S D Eueb Asru Diameter: 250mm Passage: 65mm Factory no.: Y615126

Condition: new, functionality: fully functional, overall weight: 26,000 kg, Year of construction: 2026, warranty duration: 36 months, Equipment: crane, cruise control, parking heater, seat heater, trailer coupling, DAF XF 530 FAT with front crane Fassi F255 A, leading axle, valid until 2026! Ljdpfjx Ekddjx Ab Asru

Condition: new, Table saw CASADEI F 25 LL FK Holzkraft CASADEI Lodpfx Aeu T Hhkjb Aoru Dimensions and weights: - Weight (net) approx.: 510 kg Dust extraction connection: - Number of dust extraction ports: 2 - Dust extraction port diameter: 80 mm - Number of dust extraction ports on the fence: 1 - Dust extraction port diameter on the fence: 120 mm Work table: - Work table length: 2500 mm - Work table width: 810 mm - Table height: 923 mm Installation information: - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Work area length: 3700 mm - Work area width/depth: 5000 mm - Explanation of work area: Please add the specified dimensions to the space requirements to obtain the recommended clear installation area for the machine. Equipment: - Fence: Heavy-duty professional design with aluminum fence cheeks and fine adjustment, adjustment from the front via a crank with a numerical digital display - Arched sawing guard - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual height and swivel adjustment of the milling unit - Position of the controls: on the machine body - Table design: table extension on the left and right, and extendable workpiece support (total width 2500 mm) Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Power of drive motor: 7.0 kW Milling spindle: - Spindle tilt: -45 – +45 ° - Usable length of the spindle: 140 / 180 mm - Explanation of usable length of the spindle: for spindle diameter 30 – 35 / for spindle diameter 40 – 50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speed(s): 3000/4500/6000/8000/10000 min⁻¹ Maximum milling tool diameter: - Maximum tool diameter, plunge-cut: 320 x 60 mm - Maximum tool diameter, profile milling: 250 mm - Maximum tool diameter, mortise milling: 350 mm - Maximum tool diameter, form milling: 160 mm

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar Lrjdsypcryjpfx Ab Asu -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

Condition: used, Transnorm roller conveyor Chain overdrive 2515-670-620 RA1870 Make: Transnorm Roller width (RB): 620 mm Nominal/outer width (NB): 670 mm Length: 2515mm Diameter rollers: 50 mm Distance between rollers: 80 mm Lrsdpfx Abok Abiqj Aou Frame height: 120 Roller conveyor motor: SEW drive motor with frequency converter Conveyor speed: freely adjustable with frequency converter Can be shortened in 80 mm steps Additional roller conveyors can be connected via the chain drive and driven by a motor. Optionally available: Supports Side guide one and both sides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 317,351 km, power: 184 kW (250.17 HP), first registration: 05/2015, fuel type: diesel, tire size: 315/80r22.5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: red, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel-air, loading space length: 5,100 mm, loading space width: 2,440 mm, loading space height: 800 mm, Equipment: crane, electric window regulation, Technical information Number of cylinders: 6 Engine capacity: 6.700 cc GVW: 19.000 kg Drivetrain Drive: Wheel Make of engine: DAF Axle configuration Tyre size: 315/80r22.5 Front axle: Suspension: leaf suspension Lrsdju N H Aiopfx Ab Aeu Rear axle: Double wheels; Suspension: air suspension Functional Mast: telescopic (2 parts) Make of bodywork: EFFER 145/2S Tipper: Back = Additional options and accessories = - PTO - Tipper hydraulics

Condition: new, bore capacity in steel (diameter) 25 mm throat 175 mm bore stroke 50 mm 16 mm spindle taper MK 3 spindle turning speed range 50 - 3000 U/min 380 mm 175 mm table surface area 700 x 180 mm connected load frequency 230 V max. distance between table and spindle-nose max. 320 mm total power requirement 0,75 kW weight of the machine ca. 150 Kg dimensions of the machine ca. 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. Lsdpfxsupxtfe Ab Ajru 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools

Condition: excellent (used), Carbide saw double side grinder VOLLMER model CEF250 Lrsdpfx Ajukgw Ujb Asu

Condition: used, Year of manufacture: 2013 Colour: Grey Price: On request Lrsdpowz Nxxsfx Ab Aju - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 - Number of rotating knives [pcs.]: 0 - Number of fixed knives [pcs.]: 100 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm Lrsdpfxju R S Dbe Ab Asu - new exhibition machine -

Year of construction: 2010, condition: excellent (used), Three-jaw chuck Manufacturer: Forkardt Model: F 250 Lrjdpfxsfb T Dbe Ab Aju Threaded spindle: 105 x 6 mm Cylinder diameter: 105 mm Outer diameter: 250 mm Inner diameter: 63 mm Chuck height including flange: 180 mm Age is estimated.

Condition: new, Year of construction: 2025, Fixed clip former CF-25 was designed by our company for fixed cleat production of standing seam roofing panels with a seam high of 25mm. Following clip is the main fixation element that ready roofing panel fastens to the roof base. A fixed clip has many advantages, such as simple design, low production cost, easy installation. We make clip formers for 25, 27 or 39mm clip highs. As blank, you can use metal in strips of the required width with up to 0.8 mm thickness. You can make product clip in one easy step -just need to put blank metal into the press and activate the press with manual handle system. Clip former makes clip bending and necessary holes cut in one-step operation. Thus, with our clip production press customer has opportunity to produce a fixed clamp in numbers, using it for his own needs or to sell it for other roofing installation companies. Fixed clip former is lightweight one, which allows taking device to working places and transport it easily. For productive work, clip former must be securely fastened to a flat surface. Fixed clip former press CF-5 made by our company will save your time and money from looking for standing seam fixation elements suppliers, will help you effectively organize your product production and will make roofing works more convenient. We also manufacture sliding clip formers. As an option we can make fixed clamp former for standing seam panels of 25, 27mm or 39mm lock high, those panels you can make with following machines: Standing seam roofing machine F3; Lodpfx Asqxadbjb Asru Roof panel standing seam roll forming machine F3-27 with clip relief; Standing seam roll former F3-39;