Used Engel Engel Victory 1050/160 Tech Tiebarless (2012) Cc200 Controll for sale (54,484)

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm Tsdepa Rhbjpfx Amroc 618 cm3+251 EC100/A03 Minmal mold height 320mm Maximum 730mm

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Tsdpfx Aswm Iy Ejmrec Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t Tedpfx Amjzy Ip Djrec tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: Tedpoztn Dzofx Amrec - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Tedezy Iwbspfx Amrec Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 Tsdpfxew U Sz Ij Amroc X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, Equipment: rotational speed infinitely variable, 3V TECH BE 2500 GLASS-LINED REACTOR – UNUSED – YEAR 2023 Complete with agitator drive and glass-lined agitator CONDITION Unused 3V Tech BE 2500 glass-lined reactor, manufactured in 2023. The reactor was installed as part of a new process plant. However, the plant was never commissioned, and the reactor has never been used in production. It is therefore offered in UNUSED condition. The reactor is currently still installed. Professional dismantling, preparation, and packing for transport will be carried out by us and is INCLUDED in the scope of supply. MAIN TECHNICAL DATA Manufacturer: 3V Tech, Italy Type: BE 2500 Year of manufacture: 2023 Nominal capacity: 2,500 liters Total vessel capacity: 3,500 liters Jacket capacity: 430 liters Heating/cooling surface: approx. 9.6 m² External vessel diameter: approx. 1,600 mm Glass lining: 3V Tech G2208, blue Design code: AD 2000 PED: Category IV, Module G DESIGN CONDITIONS Vessel: Design pressure: -1 / +4 barg Design temperature: -30 / +160 °C Heating/cooling jacket: Design pressure: -1 / +8 barg Design temperature: -30 / +160 °C AGITATOR SYSTEM The reactor is equipped with the 3V Tech CRYOLOCK® agitator system. Agitator configuration: - 3V Tech CRYOLOCK® system - Glass-lined special impeller with lowered blades - 4-arm impeller - Single agitation level - Complete top-mounted agitator drive - Motor power: 7.5 kW - Power supply: 400 V / 50 Hz - Variable-speed operation - Mechanical seal system EQUIPMENT / FEATURES - glass-lined reactor vessel - G2208 blue glass lining - glass-lined agitator - complete agitator drive - heating/cooling jacket - DN 500 manway - sight glass / inspection connections - bottom discharge assembly - multiple process and instrumentation connections - support ring for installation - extensive original technical documentation APPLICATIONS Suitable for demanding reaction and mixing processes, particularly in the pharmaceutical, fine chemical, and chemical industries. The glass-lined construction provides excellent corrosion resistance and is suitable for processes involving aggressive media. DOCUMENTATION Extensive original manufacturer documentation is available, including technical data, drawings, and equipment documentation. DISMANTLING & PACKING INCLUDED The reactor is currently installed. CYCRON GmbH will organize and carry out the complete professional dismantling and preparation of the reactor for transport. The reactor will be professionally dismantled, secured, and packed for safe transportation. Todpfx Ameyfg Azsrsc The customer therefore receives the reactor ready for collection/transport without having to organize the dismantling work. Inspection of the reactor in its currently installed condition is possible by prior appointment. Further photographs, drawings, and detailed technical documentation are available upon request. Price on request / negotiable. Subject to prior sale and technical errors.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Todpfez Dtb Djx Amroc Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Todpfx Aeuqgbyjmrsc Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: good (used), Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg Tsdog I D Ngepfx Amrec

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Tjdpfxsztn Sxs Amrjc Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Condition: used, Year of construction: 1996, functionality: fully functional, Pressure 160 t Bending length 3000 mm Machine weight approx. 16 t Equipment: - Two-hand foot pedal - CNC control Cybelec DNC 800 - Hydraulic upper tool clamping - Hydraulic crowning - Hydraulic lower tool clamping - 5 manually adjustable backgauge fingers - Die displacement Tjdpfx Amox A Eucoroc - Tool package - Side safety doors - Controlled axes: y1, y2, x, R

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Tedpfxou D Dhxo Amroc Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,100 kN, screw diameter: 150 mm, total width: 1,400 mm, total height: 1,150 mm, overall weight: 77,000 kg, Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details. • Working hours: 86,200 h Tjdpfx Aeyuc Ursmroc • Column diameter: 230 mm • Displacement: 10,955 cm³ • Injection pressure: 1330 bar • Ejection force: 215 N • Opening stroke: 1800 mm • Heating capacity: 113 kW (153.64 hp)

Condition: new, Year of construction: 2010, functionality: fully functional, space requirement width: 2,700 mm, space requirement length: 3,500 mm, space requirement height: 2,600 mm, overall weight: 5,200 kg, pressure: -1 bar, operating pressure: 6 bar, temperature: 200 °C, filter area: 2.5 m², operating temperature: 200 °C, Reference: C13598 316 stainless steel ATEX nozzle filter drier, 3V Tech 250 FPP/SD FM, with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industries. Material 316/316L stainless steel Technical specifications Model 250 FPP/SD FM Year of manufacture 2010 Body working pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Case/jacket working pressure -1/+10 bar Case/jacket working temperature -25/+200 ºC Case/jacket volume 80 + 20 L Equipment configuration ATEX Electrical panels Bag filter Hydraulic unit Centrifugal pump Transport information Tjdpfx Ajwpf Sqjmrec Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 kg Documentation CE certificate Certificate ATEX Maintenance Manual Operating Manual Drawings Electrical Diagrams Filtration Area Filtration Area 2.5 m² Condition Unused Manufactured by 3V TECH

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel Tsdpszz Hg Dsfx Amroc – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: used, Year of construction: 2009, Manufacturer / Brand: HB-THERM Model / Type: HB-160Z1 (Serial number: 909-9512) Year of manufacture: 2009 Heat transfer medium: Pressurized water (closed circuit) Maximum temperature: 160 °C Maximum system pressure: 20 bar Internal fluid volume: 1.5 L Heating capacity: 8.0 kW Pump capacity: 1.0 kW (max. flow rate 60 L/min, max. discharge head 60 m) Cooling capacity: 30 kW (at 60 K temperature difference) Supply voltage: 380–420 V (3~, 50–60 Hz) Nominal ratings: 400 V, 50 Hz | 14 A | Total power consumption 9.1 kW Cooling water inlet pressure: 2 to 5 bar Additional equipment: DFM 8 flow measurement module (HB-FM160-20), 4-zone Todsz D T Ttopfx Amroc manifold (circuits 1, 9, 8, 7)

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm Tjdpfxotqqr Re Amroc stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Tjdjww Tzispfx Amrjc

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph Tedpfx Aowxlm Hemrsc

Condition: used, Year of construction: 1996, used good condition cleaned function tested Manufacturer: Höcker Polytechnik Type: Vacumobil EA 160 A Year of manufacture: 1996 Machine no.: 931014 Tedpfoz D Iuxex Amrec GS dust tested CE type tested Clean air unit Underpressure Filter cleaning, automatic Filter cleaning, manual-motorized Connection diameter mm: 160 Motor kW: 3.0 Pressure Pa: 2580 Air flow m³/h: 1447 Weight approx. kg: 250 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Tsdpfoy Um S Nsx Amrjc Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/80 Phoenix Tsdpfexq Ti Rox Amrec Clamping force: 80 tons Year of manufacture: 2004 Screw diameter: 40 mm

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data Tedpfx Amjzuy Arjroc - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, control type: CNC control, controller model: FSCUT, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 2,000 mm, working width: 1,000 mm, type of cooling: water, overall weight: 1,500 kg, Equipment: cooling unit, emergency stop, fume extraction, Z1313 CNC Fiber Laser – 3 kW – Year of manufacture 2023 – only 200 hours of operation – 2000×1000 mm – Private sale – €35,000 Description For sale is a Z1313 CNC fiber laser, manufactured in 2023, from a private owner. The machine has only been used privately, has approximately 200 hours of operation, and is in very good, fully functional condition. Ideal for metalworking, workshops, prototyping, small series production, and precise cutting work. Technical data Model: Z1313 Laser power: 3 kW fiber laser Working area: 2000 × 1000 mm Year of manufacture: 2023 Todpfx Aszrfryemrjc Hours of operation: approx. 200 Condition: very good, ready for immediate use Control: CNC system including operating monitor Software: CypCut cutting software (FSCUT controller) DXF/AI/SVG import Automatic nesting Material library Height control (BCS system) Cooling: 3 kW chiller Extraction: available Control cabinet: complete Accessories: various tools, clamping devices, small parts Reason for sale: No longer needed Special features: Private sale → no VAT, no guarantee