Used Durchmesser 100 Mm Länge 380 Mm for sale (85,028)

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth Hsdpfx Agsmidyfemenn 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Hnodpfsmkixwjx Agmjn The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Hsdpfxemhh Dto Agmjnn Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 520 mm, roll pitch: 90 mm, total width: 595 mm, total height: 75 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 595 mm, construction height: 75 mm, TAF article number: 1000003809 Manufacturer: unknown Year of manufacture: unknown Hodpfx Aenxh Hcjgmsnn Overall dimensions: 2,970 x 595 x 75 mm (LxWxH) Cheek width: 595 mm Cheek height: 70 mm Conveyor length: 2,970 mm Conveyor width: 520 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 90 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 440 mm, roll pitch: 60 mm, total width: 510 mm, total height: 75 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 510 mm, construction height: 75 mm, Item no.: 1000003806 Roller conveyor, roller conveyor, parcel conveyor Technical Data: Manufacturer: unknown Year of construction: unknown Overall dimensions: approx. 2,970 x 510 x 75 mm (LxWxH) Cheek width: 510 mm Cheek height: 70 mm Conveyor length: 2,970 mm Hedponxh Dzsfx Agmjnn Conveyor width: 440 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 60 mm Roller diameter: 50 mm Drive: Gravity Special features: ... Condition: Used / fully functional Function test: OK

Condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers, hand trucks -Handover: in current condition as viewed -Note: Note condition of wheels/platform -Heavy-duty transport vehicle: hand platform truck with 1-axle turntable steering, suspended -Platform: 1000/620/H380 mm -Load capacity: 1.5 t -Tires: Ø 255 x 70 mm solid rubber -Total dimensions: 2070/620/H380 mm Hsdpfxeucagls Agmonn -Weight: 98 kg

Condition: good (used), Year of construction: 2014, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor with central drive -Type: 1100 -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Belt width: 600 mm -Conveyor length: approx. 13800 mm / height adjustable by approx. 1000 mm -Installation dimensions: 13880/970/H370 mm Hjdpfoign Unox Agmenn -Transport dimensions: 4770/970/H1580 mm -Total weight: 478 kg

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm Hnsdpfx Agoy Ipbmomjn in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: good (used), Pearl mill, agitator mill, shredder, crusher, grinding mill, counter blade, crushing blade, counter cutter -Counter blade: Length 640 mm -Hole spacing: 173 mm / bore Ø 22 mm -Number: 3 knives available -Price: per piece Hnedpjzcu Dujfx Agmon -Dimensions: 640/150/29 mm -Weight: 21.3 kg/pc.

Condition: new, Indramat TRK6-4U-380 / 100-G1 / 551 Pulse-thyroid control amplifier SN:219444-004991, unused, 100% functional, scope of delivery as per photos Hedpfxstyr A Aj Agmenn

Condition: good (used), quantity 1 STK. Hahn & Kolb SUBITO SU Internal Precision Gauge SU100-160mm 7 inserts 4 discs Without dial gauge In a wooden case. For the precise measurement of bores using the 2-point measuring method. By rotating and/or moving the gauge within the bore, geometric deviations can be detected. Hodpfxozb Rapj Agmonn The movable measuring pin is fitted with carbide, as is the fixed measuring pin. Self-centring in the bore kzeuge GmbH.

Condition: good (used), Stuffing box for screw conveyors, transport screws, screw conveyors, conveying technology, pipe screw conveyors, drying screws, cooling screws, cooling tube screws, heating screws, heating tube screws, screw heat exchangers -Stuffing box: made of stainless steel -Stuffing box: for Ø 60 mm shaft (inner diameter 62 mm) -for stuffing box strap (inner diameter 80.2 mm) -Number: 12 stuffing boxes available -Price: per piece Hnodsdfglgopfx Agmjn -Dimensions: 147/147/H70 mm -Weight: 2.8 kg

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers Hnodpfx Agec Uz Hmsmjn -Roller diameter: 115 mm -Transport roller width: 380 mm -Total length: 420 mm -Shaft diameter: 40 mm -Double square: 25 mm -Number: 4x casters available Price: per piece -Weight: 12 kg/piece

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, 2-stage support jacks, single-sided operation with anti-splash flaps according to EC Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long, for hose pipes 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right on the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear on the right outside on the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation 3x brakes Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the screen in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front Hnsdpfx Aji Rixkjgmon 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating Instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-crossmember-load-transfer areas")! Country of Approval/Signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Acceptance according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN

Condition: good (used), Here we offer you 4 transport rollers for sale. Included in delivery are: 04x swivel castors, used Manufacturer: Kama Material color castor: red Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 34 mm Bearing: needle bearing Roller material: rubber plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( oval ) Number of holes: 4 pcs. Hnsdpohunwpefx Agmon Screw hole distance: approx. 80 x 55 mm (center - center hole) Weight / pcs: approx. 0,970 kg

Condition: good (used), Current stock: approx. 400 pcs. Hsdpfxehmuylj Agmonn Included in delivery: 01x swivel castor, used Manufacturer: Wicke Type: 01 material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 100 mm Rollers Ø: approx. 80 mm roller width: approx. 35 mm Tire material: PA6 plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,556 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Hnodpeww Im Hefx Agmjn Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Condition: good (used), Technical data for the pallet rack beam: Racking system: Dexion (Hovik) Type: P 90 Included in the delivery: 01x pallet rack beam, used Material color: white I-profile: 100 x 50 mm Hjdpsw R N Hyjfx Agmenn Connector: 5 HK Clear span: 1,800 mm 02x safety pins, used Version: Sendzimir galvanized For securing the longitudinal beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. Transport or shipping beyond this is subject to additional costs, which can be individually requested from us depending on the place of delivery or delivery volume.

Condition: good (used), Current stock: approx. 370 pcs. Included in delivery: Hnsdpfxjhmux Ie Agmsn 01x fixed castor, used Manufacturer: Wicke material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 150 mm Rollers Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: polyamide plate dim.: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,745 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the base plate: Racking system: Stow Type: Pal Rack NS Included in delivery: Base plates, new Material color: Sendzimir galvanized Type: PNABG0018 For frame profile: 100 mm Hjdpjxbn Hfefx Agmjnn Material thickness: 8.00 mm Overall width: 120 mm Overall depth: 144 mm Height: 76 mm Number of drill holes: 3 pcs. Drill hole Ø: 13 mm Weight per piece: 1.34 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for pick-up. Any additional transport or shipping of this item will incur extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Redirack The scope of delivery includes: Hnedpfx Aotdnuhsgmsn 01x pallet rack beam, used Material color: yellow Box profile: 100 x 50 mm Agraffe: 3 HK (hooks) Clear width: approx. 2,710 mm Max. load per pair of beams 2,000 kg with evenly distributed load 02x safety pins, used Version: completely galvanized For securing the longitudinal beams against unintentional lifting out Currently available from stock: approx. 667 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, roll diameter: 100 mm, roll width: 35 mm, The scope of delivery includes: 01x swivel castor, new Castor material: Polyamide wheel Hjdpfxortplre Agmonn Plain bearing with bearing marks Castor material color: cream white Total height: 130 mm Castor Ø: 100 mm Castor width: 35 mm Rotation radius: 360° Panel dimensions: 105 x 80 mm (WxD) Screw grid: 80 x 60 mm (WxD) Drill hole Ø: approx. 11 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 0.700 kg Advantages compared to PA wheels: - The PA wheels are very low-wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Current stock: approx. 53 pcs. Included in delivery: 01x fixed castor, used Manufacturer: Wicke type: 01 material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 100 mm Rollers Ø: approx. 80 mm Hnedpohmuxvefx Agmsn roller width: approx. 35 mm Tire material: PA6 plate dim.: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,370 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Current stock: approx. 46 pcs. Included in delivery: 01x fixed castor, used Manufacturer: TENTE material color castor: grey material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 32 mm Roll material: PP + TPE ← PA6 + PUR Plate dim.: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Hnsdpfx Agehmuydemjn Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,57 kg

Condition: good (used), We offer here 4 transport rollers for sale. Included in delivery are: 04x fixed castors, used Material color castor: black Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 37,5 mm Roll material: solid rubber Material rim: polypropylene plate dim.: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,803 kg Hodpehunwasfx Agmsnn