Used Dr. Datz Gmbh Dr. Datz Gmbh Vs8R Solo Screw Capper (2004) for sale (75,398)

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_06202P&C, type of input current: three-phase, total width: 2,200 mm, input voltage: 400 V, working width: 1,600 mm, YORK Single-Sheet Cradle / Feeder The YORK single-sheet cradle features a top-twist material feeding system that allows the material to enter the automatic cutter directly, ensuring a continuous and efficient production flow. Bjdoyh R Htopfx Acnjll Precision and Technology The YORK single-sheet cradle/ feeder is equipped with a full-color multilingual touchscreen control panel and dedicated control software for accurate and intuitive operation. The system can be electronically synchronized with virtually any automatic cutting machine, providing precise feeding control, reliable performance, and seamless integration into automated production lines.

Condition: used, Year of construction: 2023, Max. throughput: 156 cartons or 15 pallets/h, max. pallet height including load carrier: 1989mm, max. pallet weight including load carrier: 800kg, equipment: KOCH gantry/axis system with automatic carton and pallet handling, automatic empty-pallet and interlayer handling, product infeed with barcode recognition, extensive product and pallet conveyor technology, automatic pallet wrapping using a Lachenmeier wrapper, automatic pallet labeling by Bluhm Systeme, automatic pallet weighing by Bizerba, several stationary and mobile operator panels, central KOCH system control with remote-maintenance capability, extensive safety and protective equipment, including documentation. The system was only lightly used and has very low operating hours. Bedpfjzwfr Rsx Acnoll

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 60 mm, total height: 1,660 mm, total length: 80 mm, overall weight: 80 kg, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany Bsdpfounh Hrsx Acnsll - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status Bljdpfx Acsyxccrenel - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral cantilevers for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus function for automatic determination of the focus distance - marking software EZCAD - Pilot laser (simple preview, clear text preview) - focus finder (easy focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) Bledpjt Dig Esfx Acnjl - frame made of aluminum profile - connection 230V - air cooled - Laptop with operating system Windows - dimensions: 800x 600 x 1660mm (LxWxH) - Weight: approx. 80 Kg

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, good condition. Capacity: Up to 3000 products /h Product dimensions: Length: 160 - 400 mm, Height: 50 - 150 mm Power input: 5 kW Air: 6,0 bar Ready to ship Blodpfxoylurks Acnsl

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Special equipment: automatic oil skimmer Bjdpfx Acezwb Eaenjll Technical data Heatable for aqueous cleaning agents. For the removal of oil and grease contamination in the shortest possible time. Universally applicable for the fully automatic cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129905 Easy operation thanks to the fully automatic cleaning process. This allows skilled workers to concentrate on other important tasks. The washing tank is filled with a mixture of water and a water-soluble IBS special cleaner (washing solution). The contaminated parts to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the device is switched on, and the solution in the tank is heated. In the closed device, the basket rotates around its own axis at a constant speed. The pump unit draws the washing solution from the washing tank and pumps it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The parts to be cleaned are intensively blasted with the hot solution from all sides during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the device switches off automatically. ∙∙ 1 pump arranged vertically ∙∙ 3 three-dimensional nozzle tubes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel (Ø 170 mm) ∙∙ rotating washing basket made of stainless steel, gear rim drive via separate motor ∙∙ intake filter in front of the pump shaft ∙∙ high spray pressure ∙∙ fume extraction ∙∙ stainless steel sieve plate with filter basket ∙∙ low water level protection W x D x H (closed): 1130 x 1010 x 1150 mm W x D x H (open): 1130 x 1220 x 1730 mm Usable height: 500 mm Load capacity: 150 kg Basket diameter: 780 mm Washing tank capacity: 85 liters Pump pressure: 3.1 bar Spray rate: 4800 L/h Power consumption: 4.8 kW / 400 V / 50 Hz Weight: 90 kg Temperature: 0-60°C

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. Bsdpfozv Ttasx Acnjll 20 x LTA AC3001 R, production years 2004-2011.

Year of construction: 2026, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). Bedpfei E Hp Tsx Acnoll NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Year of construction: 2026, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C Bjdpfx Acoff Agisnoll SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) Bedpeff Huwjfx Acnsll The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, Year of construction: 1993, functionality: fully functional, input frequency: 50 Hz, input voltage: 380 V, Equipment: documentation/manual, Grinder for sharpening saw blades and CrV saw discs. Blodpfozv H Uwsx Acnol

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR wire rope hoist crane Due to numerous inquiries - Price is per unit! 5 units available, see listing below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m! – double reeved, year 2015 Bljdpfsy D D S Sox Acnjl 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m! – double reeved, year 2012 Each with 2 lifting speeds, lifting height 12m, trolley gauge adjustable Each hoist supplied with pendant control and power supply plug Total weight approx. 300 kg, connection to 400V 50Hz Very good condition, see photos Item location: 75053 Gondelsheim Shipping available, please inquire with your postal code

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range Blsdpfx Asyq Hgkjcnel ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Blodpfxsqabm Eo Acnol Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: used, Bardzo mało używana pilotażowa instalacja do destylacji molekularnej/krótkiej ścieżki produkcji UIC GmbH (DE) model KD10. System jest zaprojektowany do delikatnego i ciągłego przetwarzania materiałów wrażliwych termicznie. Krótki czas przejścia i praca w wysokiej próżni sprawiają, że instalacja nadaje się do zastosowań, w których stres termiczny, degradacja produktu i jego czystość mają kluczowe znaczenie. Typowe zastosowania: - półprodukty farmaceutyczne - wysokowartościowe chemikalia - składniki nutraceutyczne - ekstrakty botaniczne - składniki kosmetyczne - olejki o wysokiej wartości, - lipidy aromatyczne i zapachy Powierzchnia grzewcza: 0,1 m² Blodpfjzunuvox Acnol Podawanie produktu w zakresie od 1 do 2 kg/godz. Stan urządzenia: tylko nieliczne próby pilotażowe, brak rutynowego zastosowania produkcyjnego. Obecnie instalacja jest składowana. Części kontaktowe i rama nośna ze stali kwasoodpornej. Wymiary transportowe: D 254 cm x S 81 cm x Wys. 211 cm x waga 1500 kg Dokumentacja techniczna w zestawie.

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,020 mm, construction height: 410 mm, lifting height: 600 mm, empty load weight: 150 kg, load capacity: 350 kg, total length: 1,900 mm, total width: 740 mm, warranty duration: 24 months, NIVEAU - HS 350 Large lifting table without work surface Description: ᐳ Mobile scissor lift table with double horizontal scissors, basic model without work surface; with platform base frame for mounting various work surfaces; 4 swivel casters, 2 of which have brakes; wheel diameter 125 mm; operation via foot pump Bedeh A Hxijpfx Acnoll Load capacity in kg: 350 Weight in kg: 150 Useful lifting height in mm: 610 Overall height in mm: 400 Total height in mm: 1010 Platform size in mm: 1900 x 740

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed Bjdpfxjfhbuye Acnell - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: new, Year of construction: 2024, - Mobile scissor lift table with platform base frame and aluminum worktop format 1000x600mm - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 200 kg - Construction height 400 mm - Useful stroke 610 mm - Maximum height 1010 mm - platform 1000x 600 mm - Weight approx. 35 kg - Swivel castor 2 pieces with brake, 2 pieces without brake Bsdpfxofhbvno Acnoll - Wheel Ø 125 mm - Color gray aluminum

Condition: as good as new (ex-display), Year of construction: 2024, - Mobile scissor lift table with single scissors Bjdpfxsfhbv Te Acnell - with smooth sheet metal plate and push handle - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 500 kg - Construction height 400 mm - Useful stroke 540 mm - Maximum height 940 mm - Platform size 1100 mm x 700 mm - Dead weight 148 kg - 2 swivel castors with brakes, 2 fixed castors without brakes - Wheel Ø 150 mm - Powder coating lacquer floor frame and platform frame light gray RAL 7035, scissors in violet blue RAL 5000

Condition: as good as new (ex-display), Year of construction: 2021, - Mobile scissor lift table with a single-scissor mechanism - With a smooth metal sheet platform, WITHOUT a sliding bar - The lifting mechanism (up/down) is operated via a hydraulic foot pump Bedpofnnaysfx Acnsll - Load capacity: 1200 kg - Overall height: 450 mm - Lifting height: 700 mm - Maximum height: 1150 mm - Platform size: 2000 mm x 1000 mm - Weight: 420 kg - 2 swivel casters with brakes, 2 fixed casters without brakes - Wheel diameter: 150 mm - Powder-coated finish: base frame and platform frame in light gray RAL 7035, scissors in violet-blue RAL 5000

Condition: as good as new (ex-display), Year of construction: 2024, - Mobile scissor lift table with a metal sheet platform - The lifting function (up/down) is operated via a hydraulic foot pump - Load capacity: 300 kg Bjdjfnp Rpepfx Acnell - Overall height: 400 mm - Lifting stroke: 610 mm - Maximum height: 1010 mm - Platform size: 1000 x 600 mm - Weight: 75 kg - 2 swivel casters with brakes, 2 swivel casters without brakes - Wheel diameter: 125 mm - Powder-coated finish: base frame and platform frame in light gray RAL 7035, scissors in violet-blue RAL 5000

Condition: as good as new (ex-display), Year of construction: 2023, Technical description with the following main data: Bledpsupztzofx Acnsl Load capacity 3000 kg static line load effective stroke 1100 mm Overall height 250 mm Total height 1350 mm Platform length 1700 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 29 sec. for the full effective stroke Lowering time depending on load Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 2.2 kW, 1,400 rpm. Valve voltage 24 V DC Sealing class IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 455 kg Floor frame for moving with pallet truck or forklift

Condition: new, Year of construction: 2024, functionality: fully functional, Technical description with the following key data: Load capacity: 1000 kg static line load Blsdpfoiwi Inex Acnol Useful stroke: 775 mm Overall height: 85 mm Total height: 860 mm Platform length: 1450 mm Platform width: 1140 mm Material: Smooth sheet metal Lifting time: approx. 20 sec. for the full useful stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 4-meter cable Motor: 1.1 kW Paint finish: Blue-grey RAL 7031 Unit placement: freestanding Control box: Dead man’s control incl. 2 m cable Total weight: approx. 270 kg Standard version: The lifting tables comply with EN 1570 E and are marked with the CE symbol. The steel parts are cleaned, primed with rust-protective paint, and painted with a two-component polyurethane paint. The lifting tables are equipped as standard with all-round safety cut-off strips made of aluminum and with mounting supports for repair and servicing. Our lifting tables are designed for approximately 5 lifting cycles per hour with full load in 8 hours per day. For more intensive operation, we offer special lifting tables.

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Bodpfx Aotrf Smocnoll Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive