Used Cryonomic Cob62+ Dry Ice Blaster for sale (3,667)

Year of construction: 1994, condition: used, dryer dry-air KOCH CKT 300, 300 m³/h, year: 1994, price: 4.900 €, contact: Mr. Rainer Eckerle Bdodpfjb Hu S Tjx Acnjg

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Bsdpfxod I T Exs Acnsdg Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: like new (used), Treif Breadslicer 4-24MM In good working condition for more information please sent an request Bdedoumpg Rspfx Acnsg

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Bdsdstvfcmspfx Acnjg

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Bsdjt S Efgjpfx Acnsdg Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Bodst Tyqmopfx Acnjdg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included Bsdpfx Aeu Dw I Ejcnsdg - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2017, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 32 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, PLASMA CUTTING) | YEAR 2017 The Ficep Tipo G25LG is a CNC-controlled plate processing line for drilling, milling, marking and plasma cutting of steel plates in a single pass - without re-clamping. This significantly reduces throughput times in the production of gusset plates, end plates and connection components. CONDITION Used - technically sound. The line is currently in productive operation. - Inspection UNDER POWER during ongoing production possible by appointment. - Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. - Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The G25LG combines a vertical mono drilling unit with automatic tool changer (ISO 40) and an integrated plasma cutting unit in a rigid twin-bridge gantry frame - all processes in a single pass according to the NC program. The Ficep Pegaso CNC transfers part data and hole patterns directly from CAD without manual rework. Typical applications: structural steelwork, steel trading and plant construction. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2017 | Serial number: 35446 - Machine type: CNC plate processing line (drilling / milling / plasma cutting) - Condition: used, technically sound - Plate width: max. approx. 2540 mm, min. 200 mm | Max. plate length: 6000 mm - Plate thickness: max. 100 mm (drilling), max. 45 mm (plasma), min. approx. 6 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Tool positions (ATC): 24 - Drilling diameter: max. 32 mm, min. approx. 10 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7000 rpm | Spindle power: 15 kW - Plasma source: Hypertherm HPR 400 | Plasma current: 400 A - Straight plasma cutting and bevel plasma cutting - Max. longitudinal travel speed: approx. 30 m/min | Cross positioning: approx. 4.6 m/min - Pass line height: approx. 850 mm - CNC control: Ficep Pegaso, direct NC data input with CAD interface - Frame concept: welded twin-bridge gantry frame | Machine weight: 8000 kg - Processes: drilling, milling (straight/curved slots, countersinking, Y/J weld prep), tapping, centre punching, marking, straight and bevel plasma cutting Values marked "approx." are confirmed during inspection. Overall dimensions and electrical connection on request. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2017) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) Bsdpfx Aou Dxbtocnjdg - 1 x Bevel plasma cutting torch | 1 x Hypertherm HPR 400 plasma source (400 A) - 1 x Infeed roller conveyor with material transfer (6 m) | 1 x Outfeed roller conveyor (3 m) - 1 x Fume extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Arrange an inspection under power | Price on request. Sale exclusively to commercial customers (B2B).

Year of construction: 2023, operating hours: 100 h, condition: new, functionality: fully functional, machine/vehicle number: 1500, ICE CREAM FREEZING MACHINES, virtually new, only used for initial testing, located in Seville (Spain): - FREEZER EXPLORER 1500 with piston pumps - FANUC LR Mate 200iD 7LG robot Bedpfev Akgnjx Acnjdg

Condition: like new (used), functionality: fully functional, Krebeck drying tunnel whit buffert conveyor. Regulated speed on both conveyors and hot air drying fan attached. wet fruits can be pre-dryed before subsequent processing e.g. on a package line. Bdodpsyityhsfx Acnjg Contamination, leaves and stalkes get filtered out at the same time. Three power levels are available. The temperature gets digitally displayed. Outfeed hight 150 cm Indeed hight 90 cm Belt width 50 cm

Condition: excellent (used), functionality: fully functional, Pastry laboratory or small pastry shop? For sale: Bravo 183 Executive combined gelato machine in excellent condition. Cooking and freezing in one unit, featuring numerous factory programs (cream and jam cooking, chocolate tempering, choux pastry production, cream chilling, glaze preparation, macaron meringue, etc.). Bedpfx Acoyi H Npenedg Trittico® Executive 183 Combined machine with ionic system and dual inverter For pastry, chocolate, savory foods, and gelato production Water-cooled Absolute Creative Freedom Trittico® Executive is the first and only complete laboratory enclosed within a single machine: over 40 years of innovation in less than 10 square feet. Trittico® Executive combines traditional experience and craftsmanship with state-of-the-art technology. Designed for pastry, chocolate, high-quality gelato, and top-level international cuisine. Technical features: · Ingredients can be added during any heating or freezing phase · Dual inverter: upper tank stirrer with 3 speeds and batch freezer mixer with 8 speeds · Sheet resistance heating system: ultra-fast heating, no thermal hysteresis, high temperature precision, prevents burning · Patented ionic® System control: detects optimal frozen water percentage for correct gelato/sorbet consistency and volume · Thermal shock with rapid temperature decrease from 85°C to 4°C: ensures highest product sanitization and hygienic mixing · Software with multiple pre-set recipes · Direct extraction chute Advantages and strengths: · Very easy and convenient product loading · Mixing speed adjustable automatically or manually · Quick wash cycles · Maximum hygiene · Extremely easy to operate and clean

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22499562/0001, volume flow: 200 m³/h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 11 A, type of input current: AC, type of cooling: air, rotational speed (max.): 1,450 rpm, protection type (IP code): IP55, Wilo - 2120809 - Standard single dry-running pump IL 150/190-5.5/4, DN150, 3x400V, 5.5kW Bdodpeynxi Esfx Acnsg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 40,002,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Bdjdpow Al Rmefx Acnjg

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 004, 2 Vacuum Pressdryers QUATTRO with Automatic Stacking and Remote Control. Lumber and Platens are combined transported Bodpfx Aev S U Tqjcnodg 2 Vacuum Pressdryers SIGMA 9 QUATTRO with automatic stacking Lumber content 72 m³ (30 mbf) comparable to 210 m³ (90 mbf) vacuum dryers with fans or to 800 m³ (340 mbf) conventional dryers but more economical, without contamination of the atmosphere and with Super drying-quality!

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Bdsdpfxov I Agdo Acnsg Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Ultimate pressure: approx. 200 mbar (abs.) Accessories: Intake filter; Operating instructions Delivery time: Short term

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. Bjdpev Iaqyefx Acnjdg SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Bedpfxexd D I Ro Acnjdg

Condition: new, Jartek dry and green board sorting line Bjdpfx Asx Ddhkocnjdg

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Bdodpfx Ajt Ag Udjcneg

Year of construction: 2000, condition: good (used), functionality: fully functional, The system is suitable for the accelerated drying of painted components, which are transported through the dryer on trolleys with a chain conveyor. The dryer has a total length of approx. 20m and is equipped with a high-speed door on both sides. Maximum component length is approx. 5m. The heating medium is hot water 90°/70°C. The plant can currently still be viewed in operation. Bjdpfx Aevi Hdvocnodg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, resulting in a flawless and shiny surface. Main features: Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Bsdpfxsvi Nhde Acnedg Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Commissioning: Use of GM 16 or GM 20 maize grains required. The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now!

Condition: used, This listing is for a Star Lab N2400-4002 Dry Bath System. The unit is in full working condition and is ready for immediate release. The Star Lab Dry Bath System N2400-4002 is a dual block dry bath system designed for various laboratory applications. It is part of the Star Lab Dry Bath System series, which offers great value and convenience for users. Key Features: Dual Block System: The N2400-4002 features two blocks, allowing for simultaneous heating of multiple samples. Digital Microprocessor Controller: The system is controlled by a digital microprocessor, ensuring precise temperature control. Temperature Range: The system can operate at temperatures ranging from 5 °C above ambient to 150 °C. Temperature Accuracy: The temperature accuracy is ±0.2 °C, ensuring reliable results. Bdedsxxzg Tjpfx Acnsg Timer: The system features a timer that can be set from 0 to 999 minutes. Safety Device: The system is equipped with a leak-proof heating chamber, ensuring safe operation. Power Consumption: The system consumes 200 W of power. Dimensions: The system measures 200 mm x 298 mm x 80 mm (W x D x H). Weight: The system weighs 2.8 kg. Applications: Heating and boiling Restriction digests Denaturing DNA Melting agar Coagulation studies In situ hybridisation Hot Start thermocycler reactions

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Bsdpfxoxx Aive Acnedg Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Condition: new, functionality: fully functional, power: 40 kW (54.38 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH DRYMIX 60 fully automatic dry-type concrete batching plant stands out with its special design that does not include a mixer. Concrete components are transferred directly to the transit mixers via precision weighing systems without any mixing process. This feature provides a significant advantage in projects where concrete needs to be transported long distances from the production area. DRYMIX 60 is an ideal solution for long-term projects, offering both high-performance production capacity and low maintenance requirements. The plant is compatible with cement silos of different sizes, ranging from 50 to 500 tons, depending on the project and site conditions. When bagged cement is used, it is easily loaded into the cement silos thanks to the integrated blasting bunker and silo filling systems. Furthermore, the plant can be equipped with special heating or cooling systems depending on the climatic conditions of the region where it will be installed. In cold regions, the system is equipped with steam generators and insulated panels, while in hot regions, it is supported by equipment that cools the concrete. Aggregate pre-feeding systems eliminate the need for a bucket ramp, facilitating installation. In situations where site space is limited, aggregate transfer can be performed using a bucket system instead of a conveyor. DRYMIX 60 is equipped with high-quality SIEMENS and SCHNEIDER brand electronic components and manages the entire production process safely and efficiently with its user-friendly PLC-based automation system. DryMix-60 Dry Type Concrete Batch Plant Technical Specifications Production Capacity: 60 m³/h Weight: 27 tons (excluding cement silo) Total Motor Power: 55 kW Electric Generator Requirement: 80 kVA Required Operating Area: 200 m² Aggregate Storage Bunker: 4 x 15 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Weighing Belt: 600 x 9,700 mm Cement Weighing Bunker: 600 kg Water Weighing Bunker: 300 l Additive Weighing Bunker: 30 l Air Compressor: 300 liters, 4 kW Cement Silo: 50–500 ton capacity option Control Type: Fully Automatic Why Choose DRYMIX 60 | Dry Type Concrete Mixing Plant? CONSTMACH DRYMIX 60 is a plant model that stands out in the industry with its efficiency and durability. Its modular design offers easy installation and portability, while the automatic control system ensures maximum precision in the production process. Energy-efficient motors and high-quality equipment guarantee long-term use. If you want to save time, labor, and costs in your projects, the DRYMIX 60, manufactured with the CONSTMACH guarantee, is the right choice for you. What Do We Do at Constmach? Bodpfjxp U Sdjx Acnedg Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, This listing is for a Thermolyne 16500 Dri-bath DB16520 The Thermolyne 16500 Series Dri-Bath (Model DB16520) is a laboratory dry block heater designed for applications requiring precise, stable temperature control for sample incubation, enzyme reactions, and other heating applications, without the need for water. It is part of the Barnstead/Thermolyne brand, recognized for its modular block design and high-quality construction. Bdodpfjxzh Nmox Acnjg