Used Case Taper for sale (5,380)

Condition: good (used), Year of construction: 2007, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 5 rpm, quill stroke: 60 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 350 mm, table length: 650 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 5 rpm, table load: 250 kg, overall weight: 1,900 kg, Equipment: rotational speed infinitely variable, Travel X/Y/Z 400/350/400 mm, spindle speed 5 - 4500 rpm stepless, motor 8,0 KW, spindle taper ISO 40, control Heidenhain TNC 124, table size 650x350 mm, hydraulic tool clamping, coolant device, spash guard, handwheel, tool holders, machine feet, manual Rodpfxszuzu No Ahgjcf

Condition: new, mileage: 500 km, power: 184 kW (250.17 HP), overall weight: 17,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 ton vehicle with single-tire special chassis, registered in 06/2026 for heavy-duty off-road use. All-wheel drive 4x4 with all locking differentials and a wheelbase of 4.50 m, single-tire configuration, high-roof design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, and more. With MAN manufacturer's warranty. Rodpfx Aozb Sv Ejhgjcf Equipment: Driver's cab: TNDouble cab with 3 seats High-roof design All-wheel drive 4x4 Wheelbase 4,500 mm Mileage approx. 1,774 km (delivery mileage) Single-tire configuration Suitable for bodies up to approx. 6.20 meters Unladen weight 6,780 kg Payload 10,720 kg at a permissible gross weight of 17,500 kg Engine: MAN D0836 LFLBN with 250 hp Euro 6 e Differential lock in front and rear axles Transfer case: MAN G102 with road and off-road modes Electronic transfer case locking management (VSM) MAN PowerMatic 08.13 OD automatic transmission Transmission function: MAN Idle Speed Driving Driving program: MAN TipMatic Efficiency up to 70,000 kg Driving program: MAN TipMatic Offroad up to 70,000 kg Driving program: MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Trailer hitch: Ringfeder Type RF40/G150B with air pressure connections Permissible total weight of towing vehicle: 28,000 kg Trailer load: 16,845 kg Trailer load for center-axle trailer: 16,000 kg Front and rear axles with leaf springs Front axle: 9,000 kg, driven as an external planetary axle, switchable, with differential lock Rear axle: HP-1333, 13,000 kg, single-tire configuration on rear axle, with differential lock Axle ratio: i=6.00 Stabilizer for front and rear axles Shock absorbers on front and rear axles Electronic Braking System (EBS) High-performance engine brake: MAN EVBec Hill start assist: MAN EasyStart Drum brakes on front and rear axles ASR, ESP, ABS Emergency braking assistant (EBA) Front Detection Tire pressure monitoring system (TPM) with tire temperature display Driver attention alert: MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150-liter fuel tank Roof hatch Daytime running lights: LED Rear lights: LED Instrument cluster: Professional 12.3 inches Stone chip protection for front headlights Electrically adjustable and heated exterior mirrors Driver's seat package: Premium, air-suspended, passenger seat package: Plus Driver's comfort seat: air-suspended, with lumbar support and shoulder adjustment Comfort center seat: air-suspended, with integrated seat belt system, positioned towards the rear Passenger comfort seat: air-suspended New vehicle registered in 06/2026 with MAN manufacturer's warranty. Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information is without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2581

Condition: used, Year of construction: 2021, functionality: fully functional, Lathe Twister FU-200, purchased on April 13, 2021, including roughing gouges and extensive clamping accessories. Suitable for woodturning, round parts, bowls, handles, small series, and creative workshop projects. Key Technical Data Rcodpezuyt Rjfx Ahgjf - Machine type: Lathe / Woodturning Lathe - Center height: approx. 200 mm - Swing over bed: approx. 395 mm, with optional external turning device up to approx. 700 mm - Distance between centers: approx. 715 mm, optionally extendable - Motor power: approx. 1.5 kW / 2 hp - Speed range: 2 belt stages, approx. 60–1350 rpm and 180–3750 rpm - Spindle connection: M33 x 3.5 with ASR Euro safety groove - Tailstock / spindle taper: MK2 - Includes roughing gouges and extensive clamping accessories as per inventory note - Rotatable and adjustable spindle stock for flexible machining - Attractive complete package for hobby turners, workshops, schools, and makerspaces No warranty

Condition: excellent (used), CATALOGUE NUMBER: 6901 TECHNICAL DATA Rcsdpfxjzu R S Rj Ahgsf - Max. turning length: 1200 mm - Max. turning diameter: 210 mm - Max. turning diameter with standard support: 90 mm - Max. dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copying units - Additional 3 cutting tools on hydraulic pistons (2 installed) - 4 types of spindle rotation - Automatic or manual machine operation - Spindle motor: 9 kW - Hydraulic pump motor: 3 kW - Diameter of extraction nozzle: 90 mm - Dimensions for transport (L/W/H): 3700x2100x2000 mm - Weight: approximately 3000 kg ADVANTAGES - Made in Italy - Automatic hydraulic copying unit - Original DTR documentation - Unpainted - Used lathe, very good condition Net price: 57,900 PLN Net price: 13,786 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m Rodju Idp Dspfx Ahgscf weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Thanks to its modular structure, our Metro 78/105 folder-gluer is a "platform" machine for the realization of specialized jobs, without the commitment and complexity of dedicated machinery. In other words, Metro grows with your jobs. Rcedpfx Ahjzwmdusgof Its digital management system allows it to interface with the other elements and attachments of the system, and the product path can be controlled from the console. Applications include presentation folders, multimedia packaging, a variety of envelopes, boxes, calendars, cases, and more.

Condition: used, mileage: 18,700 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, seat heater, - Passenger airbag Rcodpfx Aezwlr Rohgsf - Electric window control - left - Electric window control - right - Driver airbag - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: B25 Electric parking brake, BA3 Active Brake Assist, BB6 Brake force compensation in case of brake booster failure, BB7 CO2-optimized braking system, BH1 HOLD function, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz entry sill, CA1 AGILITY CONTROL chassis, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CU4 Aerodynamics package, D14 Anodized roof rails, E07 Hill-start assist, E1D Digital radio (DAB), E1E Navigation, E1T Touchpad, E4S Smartphone Integration Package, E7M MBUX Multimediasystem, ED4 12 V 92 Ah fleece battery, EL9 2-way speakers front and rear, ES2 12 V socket in the trunk/cargo area, ES3 12V sockets for rear seat rows right and left, ET4 Active Distance Assist DISTRONIC, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, F1O Center console with storage compartment and center cupholder, F2W Winter package, F3Z Comfort closing, F65 Exterior mirrors, automatically folding in, F66 Lockable glove compartment, F69 Electrically adjustable, heated exterior mirrors with integrated indicators, F84 Digital interior mirror, FG9 Detachable cupholder in rear armrests, FH0 Trim elements in piano lacquer look, black, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, G43 9G-TRONIC, GA7 AUTOMATIC TRANSMISSION TRANSFER TORQUE 700NM, H00 Warm air duct to passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, HZ0 Electric auxiliary heater, HZ7 Semi-automatic climate control, TEMPMATIC in the rear, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J1A Seat belt warning for rear seats, J55 Seat belt warning for front passenger seat, JA7 Blind Spot Assist, JA9 Active Lane Keeping Assist, JB4 Active Parking Assist with 360° camera, JH0 Widescreen cockpit, JH3 Communication module (LTE) for digital services, JP1 PRE-SAFE, JW8 ATTENTION ASSIST, K51 Mis-fueling prevention, KB5 Main tank 70 liters, KP7 Exhaust gas purification SCR generation 4, L LEFT-HAND DRIVE, L45 MULTIBEAM LED with Highbeam Assist PLUS, LA2 Headlamp Assist, LB9 Exit lights, LC4 Comfort roof control unit, LC5 Ambient lighting in the exterior mirrors, LC6 Illuminated grab handle in the rear with reading spot, LC7 Footwell lighting in the front, LC8 Ambient lighting rear tailgate, LE1 Adaptive brake light, LE4 Ambient lighting in the cockpit with 64 colors, LE6 Night lighting rear, LG4 Tail lights, brake lights and turn signals in LED technology, M3E Electric fan, performance level 5, M60 Generator 14 V / 250 A, M6A EMISSIONS CLASS EURO 6E-BIS M1, M72 Vehicle HVO compatible, MG9 Generator management, MJ8 ECO Start-Stop function, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, P28 EASY PACK package, electric sliding door/tailgate, P2Y STYLE Plus package, Q50 Trailer coupling, ball head removable, QA4 Trailer load 2500 kg, R1N Light alloy wheels 7.0Jx17 5-twin-spoke design, R22 Wheel size group 2, RG7 Tires 225/55 R17, RY2 Tire pressure monitoring system on front and rear axle, ... Metallic paint, alloy wheels, electric immobilizer, ESP, navigatio

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,850 mm, loading space width: 2,200 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, tail-lift, Are you looking for a different model, a different engine, different dimensions, or something else? Please feel free to contact us. We offer financing and leasing at attractive rates - also for the Netherlands, Austria, and for new businesses! ----Vehicle: * 176 hp (129 kW) Euro VI-E diesel engine Rsdpfxszwryns Ahgjcf * HI-MATIC 8-speed automatic transmission * Wheelbase: 4,100 mm * Rear-wheel drive * Twin tires on rear axle * Air suspension on rear axle * Standard suspension on front axle * C-profile steel ladder frame * Fuel tank 90 liters * AdBlue tank 20 liters * Tires 225/75 R16 all-season tires * Steel rims Technology / Comfort: * Luxury driver's seat * Hydraulically suspended driver's seat * Seat heating for driver * Armrest for driver's seat * Lumbar support for driver's seat * Rear wall insulation * Cab rear wall with window * Roof storage compartment above the windshield * Electrically adjustable and heated exterior mirrors * Electric windows * Central locking with remote control * Light and rain sensor * High beam control * Comfort noise insulation * Grab handle on the A-pillar * Seat covers, fabric * Trailer socket 12V / 13-pole * Rear view camera * Additional vehicle key with remote control * 12V connection for windshield OBU * Smoker's package * Aluminum radiator * Heated fuel filter * Heated crankcase ventilation * Diesel particulate filter * HVO/GTL fuel approval Safety: ESP * AEBS + City Brake * Turning assistant (BSIS) * Blind spot radar * Front monitoring (MOIS) * Proactive lane keeping assist (ELK) * Traffic sign recognition (ISA) * Extended driver attention warning * Front airbags driver & passenger * Seatbelt pretensioner passenger * Seatbelt warning system driver & passenger * Tire pressure monitoring system (TPMS) * Speed limiter 90 km/h * Additional speed limiter * Daytime running lights * Accident data recorder * Wheel chocks (2 pieces) * Side marker lights * Splash guard flaps on front axle COMFORT PLUS package: * 10" MyIVECO infotainment system with navigation * Alexa voice assistant * USB sockets on driver and passenger side * Passenger seat bench with multi-function storage and storage compartment * Fog lights * Automatic climate control * Pollen filter * Outside temperature display * Adaptive cruise control (ACC) * Climate compressor 170 ccm * Comfort headrests STYLE package: * Full-LED headlights * Leather steering wheel * Radiator grille with chrome inserts Infotainment: * AIR PRO controls * Connectivity Box 4G * Digital EU tachograph 4.1 Other: White (IC 194) * Daily model year 2026 * Easy Daily App * Vehicle monitoring & remote assistance * Over-the-air updates Box body: * Tailgate * Screen-printed floor * Combination anchor lashing rails (2 left & 2 right) * 2 lashing straps * Side door with separate locking and step * Interior and exterior lighting LED * Roof spoiler * Rear view camera * Lateral underrun protection * Aluminum wheel guards with mud flaps * Side marker lights Tail lift: Dhollandia * DH.LM10 * Load capacity 1000kg * Platform depth 1800mm * Roll-off protection * LED warning light * Remote control with spiral cable * Trailer coupling up to 3.5t trailer load (trailer coupling ball, trailer coupling socket 12V 13-pole) Additional extras for the body are available at an extra cost. ----Note: Please call briefly before your visit - we will ensure that your desired vehicle is on site. If this is not the case...

Condition: used, Year of construction: 1997, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Control M+ Mazatrol Table dimensions 2000x510 mm table load max. 1.000 kg Rjdpfxszwqcnj Ahgecf number of spindle speeds 7.000 UpM tool taper SK 40 tool piece magazine with 48 Stück weight of the machine ca. 7.500 kg

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm Rjdpsztxbdofx Ahgecf - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm Rcsdpfx Aozmfu Rohgsf - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - knife length 530mm - number of knives 2 pcs - screen dimensions 65x65mm - lower toothed feed roller - lower roller motor 2.2kW - upper toothed feed roller - upper roller motor 2.2kW - belt feeder - feeder belt length 2200mm - feeder belt width 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approx. 3000kg ADVANTAGES – German made – auto-reverse (adjustable) – DTR technical documentation – used shredder, very good condition Net price: 75,900 PLN Net price: 18,070 EUR depending on EUR/PLN rate 4.2 (Prices may change in case of higher fluctuations)

Condition: used, Technical details: turning diameter over bed: 1200 mm Rcjdpfx Aozuyfaehgof turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: used, Year of construction: 2001, center height over bed 500 mm centre distance 6.000 mm bed width 670 mm turning diameter over bed 1.030 mm turning dia. over face-slide 640 mm Max. workpiece weight between centers 5.000 kg Max. workpiece weight between centers (collet) 6.000 kg feed speeds x- and z-axis 6.500 mm/min spindle head ASA 15" spindle turning speed range 4 - 830 U/min Torque 6.224 Nm total power requirement 70 kW Rcodezt Szkopfx Ahgef weight of the machine ca. 11,3 t Headstock: - Front bearing, inside diameter: 235 mm - Rear bearing, inside diameter: 216 mm - Diameter of hole through spindle: 170 mm - Morse taper in spindle sleeve: 6 MK Tailstock: - Quill diameter: 150 mm - Quill travel: 400 mm - Quill morse taper: 6 MK Saddle and cross slide: - Torque AC axes drive motors (X and Z): 17/22 Nm - Max. feed force, X and Z (continuously rated): 2500 daN - Recirculating ballscrew diameter X-axis: 40 x 5 mm - Max. travel, X-axis: 650 mm

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 35001032, turning length: 40,000 mm, turning diameter: 890 mm, spindle motor power: 69,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, spindle bore: 122 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 260 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 120 mm, quill travel distance: 3,958 mm, spindle nose: A15, overall weight: 25,500 kg, spindle diameter: 200 mm, feed force X-axis: 10,000 N, feed force Z-axis: 22,000 N, distance between centers: 4,000 mm, Equipment: documentation/manual, For sale is a Heyligenstaedt Heynuflex turning and milling center, which is currently still in production. The machine is in operational condition and can be inspected under power and in operation until September 14, 2026. Machine type: Hn35U/4000 Flex Commission number: 35001032 Year of manufacture: 1994 Working area: - Turning length: 4000 mm - Swing diameter over bed: 890 mm Main drive: - Power at 100% duty cycle: 50 kW - Power at 50% duty cycle: 69 kW Main spindle: - Spindle diameter at the front bearing: 200 mm - Spindle bore: 120 mm - Spindle head shape: Shape A DIN55026 Gr15 - Speed range: - Gear stage 1: 1 – 540 rpm - Gear stage 2: 7 – 1800 rpm Feed: - Rapid traverse speed max.: 15 m/min - Planar feed: 0.5 - 5000 mm/min - Longitudinal feed: 0.5 - 5000 mm/min Tool carrier system: Rsdpfjzwb Dpjx Ahgocf - Tool interface: Capto C8 - Linear travel range Y-axis: +/- 130 mm - Linear travel range X-axis: 980 mm - Tool magazine: 36 tools Tailstock: - Quill diameter/stroke: 125 mm / 140 mm - Axial force min/max: 16000/2500 N - Internal taper quill: MK 5 Control system: - Type: Siemens 880T If you are interested or would like to arrange a viewing appointment, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 240 SL Year of manufacture: 2004 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Rodpfxszwv S Ie Ahgecf Cutting speed of 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is currently in use at our customer's site and will be available from September. We would be pleased to offer the following services: - Cleaning and overhaul of the machine - Commissioning and training - Delivery - Clamping devices - Cooling unit - Transport

Condition: excellent (used), CATALOG NUMBER: 6950 TECHNICAL DATA - max. width of the workpiece: 220mm - max. height of the workpiece: 130mm - 4 spindles: 1) horizontal lower: 220mm, 5.5kW 2) vertical right: 130mm 3) vertical left: 130mm; (2 and 3 spindles) 5.5kW 4) horizontal upper: 220mm, 5.5kW - 4 spindles, electrically adjustable up/down - all spindles adjustable up/down, left/right - spindle diameter: 40mm - from above: 4 infeed rollers, toothed, including 1 double roller - from above: 1 double outfeed roller, rubber - from below: 1 outfeed roller, rubber - feed on Cardan shafts - stepless feed speed adjustment: 6-22m/min Rcedozwwliepfx Ahgof - feed motor: 2.2kW - lifting motor: 0.55kW - electric adjustment of planing thickness - length of the infeed table: 1970mm - central lubrication - diameter of the dust extraction outlet: 3x120mm, 140mm - enclosed in a cabinet - dimensions (L/W/H): 3350x1400x1400mm, weight: 1700kg - German production - unpainted - used planer, very good condition Net price: 29900 PLN Net price: 7119 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 27/32 mm - R2 25/30 mm Maximum threading capacity - R1 M34x3 - R2 M20x2,5 Spindle MK III Drilling depth (mm) 125 Overhang (mm) 300 Column diameter (mm) 125 Usable table surface (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,140 mm Spindle speeds, stepless R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 370 Optional drilling package 5 (€875.00 plus VAT) - Vise [felix] 2.0 150 - Tapered mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, including packaging, free to your door! NOT THE RIGHT MACHINE? Rodpfxott Af Rs Ahgecf WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2013, The Schmedt PräForm Neo is a combined book press and joint setting machine used in bookbinding. It is designed to press hardcover books immediately after the book block has been cased into the cover, while simultaneously burning in and shaping a clean, permanent joint (the hinge groove of the book). Key Features and Functions - 2-Way System: The mechanical pressing of the book surfaces and the pneumatic (compressed-air controlled) joint setting occur sequentially. - Heated Components: The machine features heated light-alloy pressing plates as well as heated joint-forming bars. - Adjustable Pressure: The pressure of the joint-forming bars can be adjusted via a pneumatic regulator, independently of the general book pressing force. - Flexibility: It is suitable for single books as well as short to medium production runs, processing various cover materials such as cloth or laminated paper. Rcedpfx Aezwu Sajhgof - Combination: It is specifically designed to be used alongside casing-in machines like the Schmedt PräLeg Neo. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2006, turning diameter 1000 mm swing dia. 1000 mm Z-axis stroke 900 mm control Siemens 840 D tool taper SK 50, VDI 60 tool piece magazine with 44 Plätzen workpiece weight max. 35 kg Redezwg N Repfx Ahgocf tool length - max. 500 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System Rcodszwhakspfx Ahgjf For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: excellent (used), Year of construction: 2019, operating hours: 3,700 h, functionality: fully functional, HAAS DM-2 – CNC vertical machining center, year 2019, including a 5-axis unit Rjdpfx Ahszwgn Tjgjcf We offer for sale a HAAS DM-2 CNC vertical machining center, manufactured in 2019. The machine is in working and good condition, it is connected and can be tested by prior arrangement. The offer also includes a 5-axis / tilting rotary table, as shown in the photos. Key technical specifications: Manufacturer: HAAS Type: DM-2 Year of manufacture: 2019 Travel in X / Y / Z: 711 / 406 / 394 mm Spindle taper: ISO 40 Maximum spindle speed: 15,000 rpm Rapid traverse: 61 m/min Automatic side tool changer SMTC: 18 + 1 positions Tool holder: CAT / BT 40 Machining time / cutting time according to the owner's information: approx. 3,700 hours The 5-axis unit is included in the machine offer The machine is functional and can be tested.

Condition: used, Year of construction: 1989, x-travel 3000 mm y-travel 940 mm Rcsdpfx Ajuym Tcshgof z-travel 1000 mm table surface area 3250 x 800 mm spindle taper SK 50 spindle turning speed range 40 - 1800 U/min feeds longditudinal/cross/vertical 0 - 2250 mm/min rapid traverse 6 m/min table load 4500 kg control HEIDENHAIN, TNC 355 weight of the machine ca. 10,3 t dimensions of machine L x W x H 4,50 x 2,69 x 2,71 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, coolant

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 350 mm, table length: 650 mm, table load: 250 kg, spindle speed (max.): 2,500 rpm, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 1998. It features a travel of 400 mm in the X, Y, and Z axes, with a table size of 650 x 350 mm and a maximum table load of 250 kg. The spindle speed reaches up to 2,500 rpm, providing efficient machining capabilities. If you are looking to get high-quality vertical machining capabilities, consider the KUNZMANN WF 4/3 vertical machining centre we have for sale. Contact us for further details. • Travel X: 400 mm • Travel Y: 350 mm • Travel Z: 400 mm • Table Length: 650 mm • Table Width: 350 mm Rodezwxlwjpfx Ahgecf • Table Load: 250 kg • Spindle Speed: 2,500 rpm • Tool Holder: SK40 • Feed Rate: 2,000 mm/min • Rapid Traverse: 5,000 mm/min Technical Specification Taper Size SK 40

Condition: used, mileage: 381,917 km, power: 320 kW (435.08 HP), first registration: 04/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: green, gearing type: mechanical, emission class: euro5, total length: 7,850 mm, total width: 2,550 mm, total height: 3,080 mm, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2012, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, * Special equipment: Mounting plate, size 5, for attachments (snowplow) * On-board computer, left side * Auxiliary heater * Air conditioning * 9 t front axle * Air suspension axles * Front axle 9.0 t * Rear axle 13, design with external planetary gears * Front axle springs 9 t - 10.5 t for winter service applications * Rear axle suspension 15 t design * Trailer coupling: Towing hitch * Trailer coupling: Center axle trailer G 250 * Audio system: CD radio (Bluetooth) * Battery 220 Ah * CB radio * Air horn(s) on the cab roof * Transmission: 16-speed * Reinforced clutch * Rotating beacon, left/right Rcedpfx Ahszwymvegjf * Seats in the cab: Driver's seat, comfort suspension seat * Sun visor * Voltage converter 24V / 12V, 15 A * Cab socket 24V * Front bumper in steel design * Additional step for construction vehicles * Auxiliary heater (air) Additional equipment: * Emission standard: EURO 5 * Axle configuration: 6x6 * Trailer brake: 2-line system * Trailer socket: 24V / 15-pin * Exterior mirrors: Electrically adjustable and heated * Exterior mirror: Wide-angle and heated, left * Outside temperature display * Roof hatch (steel) * Differential lock: Rear axle * Differential lock: Front axle * Cab: Movable cab entry step * Cab: Mounting for rough terrain (6.0 Hz) * Cab: M (medium length) * Suspension: Leaf spring / leaf spring * Generator: 80 A, rear axle H 7, 13 t * Hydraulic pump: (Meiller pump - 6 pistons) * Fuel tank: 300 liters * Air filter: Filter for construction site vehicles * Engine: 12.0 L - 320 kW V6 diesel (OM 501 LA) * Engine brake with constant throttle * Power take-off: MB 2C * Wheelbase: 3600 mm * Rear window * Steel rims: 9.00x22.5 * Telligent transmission * Cross member for trailer coupling * Drum brake: Front and rear axle * Transfer case - with differential lock * CB radio preparation * Telephone/fax preparation * Immobilizer * Heat-insulating glazing * Central locking including key * Permissible total weight: 33.00 t Subject to errors, changes, and prior sale. Additionally available: Fliegel 18 center axle trailer, registered in 2012, at a price of €10,900 net plus VAT.

Condition: good (used), Year of construction: 2011, functionality: fully functional, DOOSAN DNM 400A – CNC vertical machining center, FANUC, year 2011 We offer for sale a DOOSAN DNM 400A CNC vertical machining center, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is currently in operation and can be demonstrated and tested upon prior arrangement. Technical specifications: Manufacturer: Doosan Infracore Model: DNM 400A Year of manufacture: 05/2011 CNC control: DOOSAN-FANUC i Series X-axis travel: approx. 762 mm Y-axis travel: approx. 435 mm Z-axis travel: approx. 510 mm Work table dimensions: approx. 920 × 435 mm Redpfxjzvh D To Ahgjcf Max. table load: approx. 600 kg Spindle taper: BT40 / ISO 40 Max. spindle speed: approx. 8,000 rpm Automatic tool changer Coolant system Power supply: 380 V Rated power: approx. 27.4 kVA Machine weight: 4,500 kg A universal CNC vertical machining center suitable for both single-piece and series production. The combination of a robust DOOSAN design and a FANUC control system ensures easy operation and good service availability. The machine is powered on and can be demonstrated in operation.