Used Baier 32/Sv for sale (8,529)

Condition: new, Year of construction: 2026, tubebender-mandrelbender Zopf 32 H with small digital for programming mandrel length 3000 mm bending capacity round tube up to 32 x 2,0 mm mild steel maximum bending radius 275 mm Nljdpfx Asfh Nz Tomysd minimum bending radius 36 mm maximum bending angle 180 degrees motor 2,2 KW main motor hydraulic motor 1,5 KW hydraulic clamping of tube weight 400 kg 400 volt 50 Hz 3 ph.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, We are selling our tower crane due to company downsizing. It is a POTAIN HUP 32-27 from 2019. The crane is in top condition with the usual signs of wear and tear. No known defects. The crane has not been used for rental purposes. Technical details: - Maximum outreach: 32 meters - Maximum hook height: 27 meters - Maximum lifting capacity: 4,000 kg (up to an outreach of approximately 12 meters) - Lifting capacity at the jib tip: 1,000 kg (at full 32-meter outreach) - Support base: 4 m x 4 m - Slewing radius: 2.25 meters or 2.75 meters In addition: - The crane is equipped with the TopSite system. - The crane has a central lubrication system (automated). - The cable guide chain in the mast (Potain recall) has already been replaced. - Includes a permanently installed connection cable, approx. 15m, with a 63A CEE plug. - The radio remote control is in very good condition, almost new. - Includes cable remote control. Nljdpezlb Epofx Amysd - Includes all technical documentation (original). - Includes concrete ballast. - Due to its transport length of approximately 12m, it can be used on very tight construction sites (see pictures). The crane is currently located in 76870 Kandel and must be removed from there at the buyer's expense, including the ballast. Transport axles are not included in the offer. A suitable generator must be brought for functional testing, as there is no power supply on site. The sale is made without any warranty or liability for defects. Errors and prior sale are reserved. If you are interested, please contact us via message or email.

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 220 mm Nljdpfx Aezip I Hsmyod tool adaptor MK 4 machine weight ab. 400 kg

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Nlodpfxeyvvq Do Amyjd 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: good (used), Year of construction: 2008, CNC Swiss turn Machine type: Citizen C-32 VIII 2M8 Year: 2008 SPECIFICATIONS Main Spindle Max. turning length: 320 mm Turningdiameter: 32 mm Spindle speeds: 200 - 8.000 rpm Nlodpfx Amezim Eveyjd Subspindle Spindle speeds: 200 - 7.000 rpm Driven Tools Equipment Bar loader magazine: FMB turbo 3-36

Condition: used, Year of construction: 1998, operating hours: 60,931 h, machine/vehicle number: 330_030901, Used Star SR-32 Year: 1998 Operating hours: 60,931 Serial no.: 330_030901 Internal no.: 231025 Control: CNC Fanuc 18i Tb Maximum machining diameter: 32 mm Maximum workpiece length: 125 mm Headstock travel: 310 mm Nsdpfjzimw Sjx Amyjld C-axis: 1° Number of axes: 7 Drilling capacity (fixed tool): 13 mm Drilling capacity (rotating tool): 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø10 mm Spindle speeds: 350 – 7,000 rpm (for driven and plain tools) Coolant: Oil CE declaration of conformity Operating and maintenance manuals Operating tools Note from seller: Fanuc transverse drive system is defective and has been deactivated by Star Micronics. Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 2,900 kg Includes: • Bar feeder FMB TURBO 5-42 (bar capacity: 5–42 mm, attachment variant "A") • Hinged belt conveyor MAYFRAN • Kraft & Bauer extinguishing system with 10 kg CO₂ extinguishing agent tank Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 mm Loading magazine weight: approx. 1,800 kg Peripheral equipment & accessories dimensions: approx. 1,900 x 700 x 800 mm Peripheral equipment & accessories weight: approx. 200 kg The machine can be inspected under power by appointment. Technical data and information are subject to change and error. Prior sale reserved!

Condition: good (used), Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 330 mm -Groove width: 32 mm -Hole: Ø 110 x 45 mm -Quantity: 1x pulley available -Dimensions: Ø 330 x 45 mm -Weight: 18.2 kg/pc. Nodpfxsziay Te Amyold

Condition: ready for operation (used), Schmalenberger ZHT07 32-08/2 centrifugal pump, serial number: 2014001631/10, with ATB CAF 100L/2C-11S+E2/0903 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nledpfxjzh Sd Ij Amyod

Condition: ready for operation (used), Schmalenberger ZHT07 32-08/2 centrifugal pump, serial number: 2015000251/10, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlodpfx Aozh Sdzomyjd

Condition: excellent (used), Year of construction: 1991, Universal CNC milling machine Specifications: CNC: HEIDENHAIN TNC415 Table longitudinal travel X-axis: 3,200 mm Nledpfx Ajwvhk Nsmysd Transversal travel Y-axis: 1,200 mm Vertical travel Z-axis: 1,250 mm Table dimensions: 5,000 x 1,000 mm Table load capacity: 15,000 kg Rapid traverse X/Y/Z: 12,000 mm/min Spindle taper: ISO 50 Spindle power: 22 kW Spindle speed: 2 to 2,000 rpm Total connected load: 46 kVA Machine weight: 25T Machine dimensions: 7,600 x 3,900 x 3,200 mm Equipped with: Manual universal head

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, volume flow: 3.2 m³/h, filter area: 21 m², noise level: 67 dB, total height: 2,000 mm, total length: 2,360 mm, total width: 900 mm, overall weight: 770 kg, compressed air connection: 6 bar, extraction nozzle diameter: 200 mm, The SPÄNEX dust extractor type SMU 32 / 45 BA with container and discharge is a compact disposal station for disposal station for commercial use for installation in the work area. Consisting of: Dust extractor with vacuum-proof housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, high-performance radial fan arranged on the clean gas side with centrifugal fan with three-phase motor of energy efficiency class IE3 and integrated exhaust air sound attenuation and air outlet grille, charging container with 0.55 kW discharge device, a circuit with CEE appliance plug (phase inverter). The circuit is designed for automatic operation. The automatic start-up control for max. 6 machines and automatic cleaning of the filter with runtime addition are included. For the coils or potential-free contacts of the machine can be used for automatic start-up. can be used. Optionally possible: Nodpfxst Ug Sgo Amysld Conversion to chip collection container € 1,270.00 net alternatively: Installation of a branded rotary valve € 1,690.00 net

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm Njdpjyvvmrjfx Amyjld spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: used, Year of construction: 1999, Technical details: Njdpfozh Nlisx Amyeld total power requirement: 2.2 kW bore spindle turning speed range: 70-4000 in 4 stufen U/min

Condition: used, Tool holder MK 4 Drilling capacity up to 40 mm steel Right and left rotation Stepless speed control with display Njdpszh Ivysfx Amyold Automatic feed

Condition: ready for operation (used), Year of construction: 1995, Drill diameter in steel/cast iron: 20 mm, 40/55 mm Spindle mount: MK 4 Overhang: 345 mm Nedpfxszh H D Ne Amyeld Table size: 450 x 600 mm Maximum distance between table and drill spindle: 785 mm Spindle stroke: 180 mm Spindle speeds in 4 groups via pole-change motor and gearbox, as well as continuously variable: 160 - 1540 rpm 4 automatic feeds: 0.09; 0.12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Njdpfjtzyx Tex Amyjld Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: excellent (used), Year of construction: 2000, Spindle block Cross-drilling unit Pick-up Threading Iemca PRA bar feeder Nljdpfx Asyz Di Ssmysd Spindle bearings recently replaced

Condition: used, Year of construction: 2024, ---- Demonstration unit Equipment: Njdpfxjzkz Eao Amyold Control panel 5-pin ELP B 32/16 A + DS sockets 16 A RIM socket Insulation monitoring relay Battery switch Operating manual (German)

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Njdpfx Aeu Nm Niomyeld Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: good (used), 035 USED Confectionery beater, confectionery mixer. TECHNICAL DATA: - capacity 30 l EXTERNAL DIMENSIONS (in cm.): - L: 60, - H: 146, - W: 63. EQUIPMENT: - kettle, - whisk. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Nlodpfx Ajvxqwfjmyod ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions Nsdpfxoy D Ndyo Amyold -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 40 mm -Type: B2-32/20x40/3 TGL 10906 -Piston rod: Ø 20 mm / M12 -Holes: Ø 20 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 220/52/H75 mm Nodov S U Uhjpfx Amyold -Weight: 1.8 kg/piece

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo Nsdsvzmr Dopfx Amyold -Weight: 23 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 540 x 3 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos Nlodpevzm Acefx Amyod -Weight: 5 kg

Condition: used, Saw blade, wood saw blade, circular saw blade Nlodpfxeuaqzbe Amyjd -Manufacturer: AKE, saw blade HM NE PRO -Type: Ø 350x3.5/3.0 x 32 Z92 = T 11.95 -Art. No.: 0507-1064541X HW -Speed: n max. 5400 rpm -Dimensions box: 390/390/H10 mm -Weight: 2.3 kg