Used Arburg - Star Arburg 200 T Injection Molding Machine With Robot for sale (113,197)

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed Rsdpfezqdagex Ahcscf The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Rjdpfezqbk Nsx Ahcjcf

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Redjzqapdspfx Ahcjcf The machine has not been tested but was in working order until the end.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Rcsdpfx Aozqam Aehcof The machine has not been inspected but was operational until the very end.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 36567, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, Weight approximately 21,000 kg Linear robot including peripherals and safety fencing available. Rodpfjzqagiox Ahcecf A used machine from a site closure is being sold. Sale excludes all warranty claims for defects. The machine has not been inspected but was operational until the end.

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Rcsdpozqabmjfx Ahcjf The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2001 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 550 mm Öffnungsweg: 700 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge Redpfx Aszl T Snshcjcf -Drehtischsteuerung

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Redpfozl Tc Tox Ahcecf Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM500-4300CX Baujahr: 2010 Schließkraft: 500 Tonnen Holmabstand 900 x 900 mm Schnecken DN: 90 mm Max. Hubvolumen: 2.290 cm³ Spritzteilgewicht: 1.777 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Rjdpfxjzl Svro Ahcjcf Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: used, Arburg unscrewing unit Model: 118044 Rodpfezpzh Sjx Ahcjcf Machine number: 12915769 Year of manufacture: 2010 Condition: used Functionality: fully functional Description The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Weight: 30 kg

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Rcjdexak Ucspfx Ahcof Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 80-380 CX Injection Moulding Machine Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Mounting plate dimensions (H × V): 670 × 670 mm Space between tie bars (H × V): 420 × 420 mm Mould height (min./max.): 250 mm Maximum opening: 750 mm Rcodpfexw Upfjx Ahcsf Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight (PS): 183 g Injection pressure: 1860 bar Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (with control cabinet): 3.55 t

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Rcsdpfx Ahowxdrbjcef Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Rodewa Svkspfx Ahcocf Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Number of screw revolutions, standard, option: rpm 390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) Rcodpfx Ahjzinanocof • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: excellent (used), Year of construction: 2014, BATTENFELD TM XPRESS 350/2250 INJECTION MOLDING MACHINE Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 h Rsdpfx Ahoziukgocecf Clamping unit Clamping force: 3500 kN Platen dimensions: 1030 × 1140 mm Tie bar spacing: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum mold opening: 1380 mm Core centering ring diameter: 160 mm Maximum ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection weight (PS): 1078 g Injection pressure: 2070 bar Maximum injection speed: 600 mm/s Additional equipment 4 × pneumatic valve 2 × hydraulic core Kneeling system after professional refurbishment Dimensions and weight Machine length: approx. 7,100 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Machine weight: approx. 17,000 kg The machine is available for inspection and testing after prior arrangement of a date.

Condition: excellent (used), TEDERIC DT400 injection molding machine with FCW05-1000P robot Manufacturer: TEDERIC Model: DT400 Year of manufacture: 2021 Rcedpfx Ahezii Adecsf Serial number: T04000648 Robot: FCW05-1000P Robot year of manufacture: 2019 Technical data Clamping force: 4,000 kN Screw diameter: 70 mm Centering diameter: injection side: 160 mm moving side: 100 mm Column spacing: 730 × 730 mm Minimum mold height: 280 mm Maximum mold height: 750 mm Maximum platen distance: 1,500 mm Injection volume: 1,347 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 40 kW Heater power: 33 kW Screw diameter: 70 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Operating hours: 21,518 h Automatic operating time: 8,912 h FCW05-1000P robot (2019) included.

Condition: used, Year of construction: 2018, TEDERIC D450/3200 injection molding machine with SW7315DS robot Manufacturer: TEDERIC Model: D450/3200 Year of manufacture: 2020 Serial number: T3045-0141 Robot: SW7315DS Robot year of manufacture: 2018 Redjzii Efspfx Ahcjcf Technical data Clamping force: 4,500 kN Screw diameter: 75 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 780 × 780 mm Minimum mold height: 300 mm Maximum mold height: 780 mm Maximum platen spacing: 1,580 mm Maximum opening stroke: 800 mm Injection volume: 1,741 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 56 kW Heater power: 39.1 kW Screw diameter: 75 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Total operating hours: 42,864 h Automatic operating hours: 16,386 h SW7315DS robot (2018) included.

Condition: excellent (used), Year of construction: 2020, WOOJIN PLAIMM TE 50 INJECTION MOLDING MACHINE Technical specifications: Rsdpfey Ulfzsx Ahcecf Machine type: electric injection molding machine Year of manufacture: 2020 Operating hours: Auto: 44,097 h Motor: 3,719 h Additional counter: 28,454 Clamping force: 490 kN Injection volume: 34 cm³ Screw diameter: 22 mm Injection weight: approx. 30–35 g PS Maximum mold opening stroke: 250 mm Column spacing: 360 x 360 mm Platen dimensions: 530 x 580 mm Minimum mold height: 130 mm Centering hole diameter: 125 mm Maximum injection pressure: 2184 bar Total power: 20.7 kW Machine weight: 3600 kg Machine type: electric (E) The machine is in very good technical and visual condition. It has been regularly used in serial production and is available for inspection while in operation.

Condition: excellent (used), TEDERIC DT500 injection molding machine with RB200CN robot Redezii D Ujpfx Ahcjcf Manufacturer: TEDERIC Model: DT500 Year of manufacture: 2021 Serial number: T05000654 Robot: RB200CN Robot year of manufacture: 2015 Technical data Clamping force: 5,000 kN Screw diameter: 80 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 820 × 820 mm Minimum mold height: 320 mm Maximum mold height: 800 mm Maximum plate spacing: 1,650 mm Injection volume: 2,031 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 68 kW Heater power: 46 kW Screw diameter: 80 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Operating hours: 17,437 h Automatic operating time: 4,009 h RB200CN robot (2015) included.

Condition: excellent (used), Year of construction: 2007, Engel Victory 330/60 TECH Injection Moulding Machine Year of manufacture: 2007 Clamping unit: Clamping force: 600 kN Platen dimensions (table): 720 mm Mould height: 600 mm Opening stroke: 900 mm Rodoxwviaopfx Ahcjcf Ejector stroke: 115 mm Ejector force: 125 mm Injection unit: Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 2,400 bar Machine weight: 5,300 kg

Condition: excellent (used), Year of construction: 2010, Stork S+ 9000-8650 Injection Moulding Machine Control system: CDS700 Year of manufacture: 2010 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial facility. It comes complete with a Sytrama 101 GL robot, enabling automation of the injection process. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar spacing (H × W): 1010 × 1010 mm Min. / Max. mould height: 300 – 1190 mm Max. opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Injection volume: 4010 cm³ Shot weight (PS): 3690 g Rcjdexyqyrspfx Ahcof Injection pressure: 1650 bar Max. injection speed: 400 mm/s Additional equipment Pneumatic valves – 4 pcs. Core pulls – 1 fixed / 1 moving Robot included: Sytrama 101 GL The machine is available for inspection and testing under power. Photos and demonstration videos available upon request. Loading and transport can be arranged.

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Rsdpfx Ajxzklqjhcecf Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Redpfx Aheyugctscscf Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2022, Krauss Maffei KM 50-55 CX hydraulic injection molding machine Year of manufacture: 2022 STAR picker Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" control panel with a color touch screen. Plasticizing unit Complete plasticizing unit for thermoplastics with a screw diameter of 18 mm, with a backflow valve and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Clamping unit - Clamping force: kN 500 - Opening force: kN 40 - Dimensions of the mounting plate (h x v): mm 600 x 600 - Distance between columns (h x v): mm 370 x 370 - Mold opening stroke: mm 400 - Minimum mold height: mm 200 - Opening width: mm 600 - Ejector stroke: mm 100 - Ejector force forward/backward: kN 23 / 10 Injection unit - Screw diameter: mm 18 - Ls/D ratio: - 22.2 - Injection pressure: bar 2500 - Injection volume: cm3 20 - Injection shot weight 1): g 19 - Injection speed: mm/s 150 - Injection rate standard: cm3/s 38 - Screw speed, standard: rpm 450 - Plasticizing capacity 1): - at standard screw speed: g/s 4.0 Electrical and hydraulic equipment - Rated power of the pump motor: kW 11 - Installed power of the heaters: kW 3.8 - Number of cylinder heating zones: - 4 - Dry cycle time / stroke according to Euromap 6 2): s/mm 1.2 / 259 Rodpfxozhwl Rj Ahcecf - Oil tank capacity: dm3 180 Dimensions and weight - Net weight with control cabinet: t 2.55 - Machine dimensions (l x w x h) 3): m 3.53 x 1.41 x 1.96