Used Wolfking Sfg 850/200 Grinder for sale (18,549)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Kjdpfxowc Rk Es Akxodk Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: like new (used), As new Tote Bins Capacity 200 Ltr Mobile on 4 nylon wheels Some complete with lids Kdedpju Ti Slsfx Akxek Qty 10 available

Condition: like new (used), 200 lfm Fachbodenregal Schäfer R3000 Kodpfx Ajdz Agdekxjdk

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, table length: 840 mm, TECHNICAL DETAILS Table size: 840 x 600 mm Dielectric fluid above table: 360 mm Maximum workpiece weight: 1,000 kg T-slots: 4 x 10 mm Distance table - quill without chuck max: 595 mm Distance table - quill without chuck min: 180 mm Travel X-axis: 565 mm Travel Y-axis: 400 mm Travel Z-axis: 415 mm Resolution X - Y - Z: 0.001 mm Resolution axis C: 0.001 Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg MACHINE DETAILS Dimensions & Weight Dimensions (H x W x D): 2760 x 1110 x 1840 mm Kodeyzn Ryopfx Akxjdk Weight: 2,750 kg Dielectric supply Tank capacity: 400 liters Paper cartridge filters: 4 pcs Generator Dimensions (H x W x D): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 - 120 A Connected load: 15 - 23 kVA

Condition: not inspected (used), functionality: unexamined, overall weight: 300 kg, total height: 2,400 mm, load capacity: 2,000 kg, throat depth: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Load capacity: 2,000 kg Reach: approx. 2,000 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,000 x 1,000 x 2,400 mm Weight: 300 kg EQUIPMENT Kedpfxeyn E Hdj Akxjdk Electric chain hoist External reference: Pieper - Lot 76

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 815, spindle speed (max.): 8,000 rpm, overall weight: 600 kg, workpiece length between centers: 336 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Universal indexing head center height: 170 mm Tailstock center height: 120 mm (with intermediate support: 170 mm) Maximum workpiece length between centers: 336 mm Workpiece diameter with cantilevered mounting: approx. 600 mm Maximum tip length: 950 mm Internal taper of the dividing spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine base) T-slots: 8 mm (additional elements) Kdedpfxjym Alhe Akxsk Grinding stroke: 190 mm Transverse movement of tool holder: 100 mm Vertical movement of grinding head: 325 mm Tool holder movement range: 230 mm Indexing device on tool slide: 330 mm Grinding head mount rotation: 360° Tool holder rotation: 360° Grinding head rotation: 360° Universal attachment rotation: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4,000 / 8,000 rpm Infinitely variable DC speed: 2,000–10,000 rpm MACHINE DETAILS Operating voltage: 380 V Frequency: 50–60 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,900 mm Weight: 600 kg EQUIPMENT Two-axis digital display Extensive range of accessories suited to the machine External Reference: Segato

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Kdedpfx Aeyx Et Hskxek Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Control: Numroto incl. software Center height: 155 mm Maximum tool length: 270 mm Working area X/Y/Z: 530/400/320 mm Grinding wheel interface: HSK-E50 Spindle power: 16 kW Max. speed: 12,000 rpm Power: 16 kW Kdjdpey Eg Ryofx Akxsk 4-position automatic grinding wheel changer including pallet loader with pallets

Condition: used, Year of construction: 2017, operating hours: 19,500 h, machine/vehicle number: LC621, Used tetra Pack A3 speed 200 ml Prisma line for UHTTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak A3/Speed V040 filling solution configured for 200 ml Prisma cartons. It is a second hand, industrial packaging line designed for high-quality beverage production with integrated downstream packing and date coding. The package also includes a comprehensive UHT processing block to support aseptic filling operations.Main filler: Tetra Pak A3/Speed V040 (carton filling technology)Primary format: 200 ml Prisma cartonsSpeed: 24.000 BPH ( 200 ml Prisma).Accumulator: Tetra HELIX ACHX30-0700-100MLine control: Tetra Pak Line Controller 30 PLUSStraw application: Tetra Pak Straw ApplicatorConveyors: Complete Tetra Pak conveyor systemPacking – wrap around: GAMPACK WB90HSPacking – case/carton: GAMPACK case packerDate coding: Domino date printerWorking hours: 19,500 (line)Included UHT process equipment:Tetra Pak Homogenizer 400Cooling tank 2,000 LTetra Pak Aseptic Tank 30,720 L with Tetra AlsafeComplete Tetra Pak VTIS UHT processing unit (pumps, valves, heat exchangers)Tetra Pak CIP satelliteAdvanced Automation & Control SystemsThe line is coordinated via the Tetra Pak Line Controller 30 PLUS, ensuring synchronized operation from filling through secondary packaging. Integrated automation supports stable product flow using the Tetra HELIX accumulator, while the Domino printer provides in-line date coding. System-wide interlocks and operator control points contribute to efficient, repeatable changeovers and robust process control suitable for aseptic beverage packaging.Production Line Integration CapabilitiesEngineered for cohesive end-to-end operation, the line links the Tetra Pak A3/Speed V040 filler with straw application, conveyors, accumulation, and both wrap around and case packing. The configuration facilitates smooth transitions between unit operations for stable throughput. It is purpose-built for 200 ml Prisma cartons and integrates easily into existing industrial packaging layouts for beverage production, whether as a standalone carton line or connected to upstream processing utilities.Machine Condition & Maintenance HistoryThis second hand Tetra Pak A3/Speed V040 carton filling line shows 19,500 operating hours. Presented as a complete used bottling line package with downstream packing and UHT processing equipment, it is suitable for facilities seeking proven, production-ready carton packaging machinery.Operational Performance & VersatilityDesigned for aseptic carton packaging, the system supports UHT-treated beverages, leveraging the VTIS UHT unit, homogenization, aseptic storage, and CIP for hygienic integrity. The straw applicator complements the 200 ml Prisma format for on-the-go consumption. Downstream GAMPACK wrap around and case packing provides flexible secondary packaging options, and the Domino date printer ensures... Ksdpfx Asy Egm Ijkxodk

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Kjdpshzcg Nofx Akxodk Delivery time: 10 working days after advanced payment

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm Kdodpfx Aey Edn Njkxsk The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder LGB France - R12070SM MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 Kjdpfx Aey Edctjkxjdk X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Table Width: 700mm Table load: 1400 Grinding stone dimensions:350 x 50 x 127mm Power: 16kW Speeds: 1500Rpm Length: 3500mm Width: 1875mm Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, grinding length: 1,200 mm, grinding width: 200 mm, total height: 2,750 mm, total length: 5,200 mm, total width: 2,700 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 1,240 mm, feed length Z-axis: 630 mm, table length: 2,000 mm, table load: 3,000 kg, table width: 1,200 mm, overall weight: 9,800 kg, power: 20 kW (27.19 HP), grinding wheel speed: 1,200 rpm, Surface grinder LGB France - R-12020 MACH-ID 9599 Make: LGB France Type: R-12020 Year: 2007 X - Travel: 2200mm Y - Travel: 1240mm Z - Travel: 630mm Table Length: 2000mm Table Width: 1200mm Table load: 3000 Grinding stone dimensions:450 x 80 x 127mm Power: 20kW Speeds: 1200Rpm Length: 5200mm Kjdpey Ec Ihsfx Akxsdk Width: 2700mm Height: 2750mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Bench grinder, bench grinder, pedestal grinder, pedestal grinder -Manufacturer: Rema, double bench grinder type DSO4/150 -Grinding discs: max. Ø 150/25/51 mm -Motor power: 0.3 kW -Speed: 2900 rpm -Operating voltage: 380 volts -Dimensions: 380/240/H270 mm Kdsdpfxohv Il Tj Akxok -Weight: 14 kg

Condition: excellent (used), Year of construction: 2004, Available: Immediately Kedpfx Aeyhpwyjkxedk

Condition: good (used), Code: 0361 Brand: NERLI Model: PN 28 Semi-automatic sanding machine for wood, varnish, polyester, with 1 abrasive belt N° 20 pads with automatic lowering by means of selectors Table lenght mm 3000 Table width mm 950 Automatic table raising Electronic display Inverter for belt speed Blowers for abrasive belt cleaning Main motor 20 Hp Table lifting motor 1 Hp Max working height 550 mm Belt dimensions mm 9650 x 150 Kedpfx Aoy D T Euskxedk Belt speed mt 25/sec Side support guide N° 2 suction outlets diameter 160 mm Overall dimensions: mm 4850 x 2000 x1850 h Weight kg 2000

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Ksdpfx Akey D Ihwjxjdk Pressing force: 32 t MACHINE DETAILS Control: Siemens 840D Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Sheet centering system Additional top tools Loading and unloading system

Condition: used, Year of construction: 2001, functionality: fully functional, wheel diameter: 350 mm, gear diameter: 400 mm, wheel width: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 600 rpm, workpiece weight (max.): 1,020 kg, total height: 3,048 mm, total length: 3,658 mm, total width: 2,590 mm, feed length X-axis: 440 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, rotational speed (min.): 600 rpm, pivoting range: 80 °, rotational speed (max.): 6,000 rpm, spindle bore: 80 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, travel speed (max.): 10,000 mm/min, workpiece diameter (max.): 400 mm, We offer this used Gleason-Pfauter P400G (400mm/800mm) CNC gear grinder machine, year of construction 2001. Type: Gear Grinders Model: P400G Brand: GLEASON PFAUTER Stock Number: GH1076 Serial # 28-727 Condition: Used Year: 2001 Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder Maximum Workpiece Diameter: 400 mm/800mm / 15.74”/31.48" Maximum Grindable Profile Depth: 35 mm / 1.37” Maximum Grinding Wheel Diameter: 350 mm / 13.77” Maximum Grinding Wheel Width: 50 mm / 1.96” Diameter of the Spindle Journal for Retaining: 80 mm / 3.14” X-Axis Travel (Radial): 440 mm / 17.32” Y-Axis Travel (Tangential): 200 mm / 7.87” Z-Axis Travel (Axial): 400 mm / 15.74” Maximum Grinding Head Pivoting Angle (+A-A): +/- 40° Maximum Table Load: 10 kN / 2,248 Lbs. Worktable Diameter: 380 mm / 14.96” Worktable Bore: 80 mm / 3.14” Tailstock Travel Distance: 650 mm / 25.59” Tailstock Locating Bore: 90 mm / 3.54” Kdjdpfx Aoyuqrrjkxek Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM Tool Speed (Spindle-S): 600 to 6,000 RPM Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM Dresser Travel Distance (Z2-Axis): 200 mm / 7.87” Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM Maximum Dressing Wheel Diameter: 150 mm / 5.90” Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min Kdsdpfsyvlxdsx Akxsk SPINDLE: 830 rpm; 24 Nm GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: FUME EXHAUSTER ; PAPER FILTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 05/2028, total width: 950 mm, input frequency: 50 Hz, type of input current: three-phase, power: 13.6 kW (18.49 HP), electrical fuse: 50 A, Spiral Mixer Sinmag Model: SM2-200 T Kneading machine with advanced and robust technology! Digital Easy Panel & 99 programs with reverse button Dough mixer with 3 programmable timers 1 mixing speed and 2 forward speeds Simple and sturdy technology! Flour dust cover with damper Stainless steel bowl and spiral Machine mobile with 4 locking castors DGUV V3-tested exclusively by us Connection: 400V, 32A CEE plug Dimensions: 950 x 1560 x 1600/2200mm (W x D x H) NEW machine, SAB certified 24 months warranty + spare parts service TOP quality and pricing in one machine! Kdjdpsvvgfajfx Akxsk Option: Leasing & rental service Delivery service Service package Maintenance contract Spare parts box Instruction & commissioning Many more TOP spiral mixers in stock!

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed Kjdpfx Aeyz T R Eokxjdk *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOGUE NO. 6623 TECHNICAL DATA - Output log diameter: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW - Feed motor: 1.7 kW Configuration: Kjdpfx Akjx Rqzajxjdk - 2 geared feed rollers - 4-knife cutterhead - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg ADVANTAGES – German-made – Ability to turn posts into cones – Used rounder, in very good condition Net price: 98,900 PLN Net price: 23,550 EUR (based on the rate of 4.2 EUR) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer of the manufacturer. All trademarks and names are used solely for identification purposes. We resell only goods that have already been placed on the market by the manufacturer. MAR-MASZ has no business relationship with the manufacturer.

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm Kdodpfx Akox Ux E Usxjk - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit Kdodpfsx S I Nqsx Akxek - idler roller - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – unpainted – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA Kjdpfx Aox Uz Rmjkxodk - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)