Used Wagner Wde 500 for sale (15,801)

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 80 mm, turning length: 2,000 mm, turning diameter: 610 mm, spindle speed (max.): 1,800 rpm, Swing diameter over bed 610 mm, over cross slide 370 mm. Distance between centers 2000 mm. Spindle bore 80 mm. Speed range 40 - 1800 rpm. Tailstock: quill travel 150 mm, Morse taper 5. Includes Siemens 810D manual turn control, steady rest, Parat toolpost, coolant system. Three-jaw chuck D 315 with various jaws, chuck mounted on spindle rear side. Manual, CE declaration. Nwodpfx Adsyzmk Ej Ssh

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 43153, heavy duty circular saw Nwedjd N Uw Repfx Ad Soh ..more information following soon..

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar Nwedpfexmrwfsx Ad Sjh • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Nwjdpfx Aoyym Saed Ssh

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model Sinumerik Movement X-Axis Movement 1400 mm Z-Axis Movement 600 mm Y-Axis Movement 700 mm This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Njdpfxsx D Elws Ad Sswh Application Types Milling

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, For Sale: WAGNER WDC 560×2000 Lathe – 2012 General Description: Brand: WAGNER (Germany) Model: WDC 560×2000 Year: 2012 Type: High-precision CNC lathe Control: FANUC Oi-TD Applications: Machining of cylindrical, conical, threaded parts and large-sized components for the mechanical engineering, automotive, aerospace, or energy industries. Technical Specifications: • Maximum turning diameter: 560 mm • Maximum distance between centers: 2,000 mm • Center height: approx. 280–300 mm (to be verified per machine) • Cross travel: approx. 550 mm • Spindle: FANUC CNC, variable speed depending on configuration • Tailstock and live center: for machining of long and precise parts • Chuck: 4- or 6-jaw (depending on configuration) Equipment and Features: Nwedpfsyc Ticex Ad Soh • FANUC Oi-TD CNC: flexible programming and automatic cycles • Cast-iron guideways for rigidity and precision • Integrated lubrication system and chip tray • Toolholder and modular turret (depending on configuration) • Possible accessories for threading, taper turning or long workpieces Dimensions and Weight: • Machine dimensions: approx. 5.5 × 2 × 2.2 m (L × W × H) • Weight: approx. 7–9 tons Key Highlights: • Large capacity: 560 mm turning diameter × 2,000 mm between centers • Reliable and widely used FANUC CNC, easy for maintenance and programming • Robust and precise machine, suited for demanding workshops

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc. Nwedpeyw N Acofx Ad Soh

Condition: as good as new (ex-display), functionality: fully functional, Cobra is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra is the first high pressure pneumatic pump without packing. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations. Cobra 40-10 is the ideal solution for working with small quantities and frequent color changes – recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry. Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA 40 :1 MAKS. TLAK MATERIJALA NA ULAZU PUMPE 20 bara DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ RADNI TLAK 250 bara MAKS. BRZO UDARA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm3/DS Nwodpfx Adsqzx Nke Sjh TEMPERATURA OKOLINE 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA ZVUKA 74 dB(A) MATERIJAL PH 3,5 - 9,0 pH PUMPA JE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale With new transformer from 380 V. AC to 220 V. DC. Manufacturer: Wagner Type: 451-130/160-600 Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Nodpfx Adjglvwgo Sjwh Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Conveyor belt: 1.400 mm. AA. : 2.530 mm.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm Nwjdpfx Adjuzvzxs Seh - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Condition: good (used), Year of construction: 2017, machine/vehicle number: N 16601, Offer 25387 Technical Data: - Drilling capacity in steel: 60 mm - Drill spindle taper: MT 5 - Drill spindle stroke: 300 mm - Digital positioning display for stroke and position - Radius (throat): 1600 mm - Column diameter: 350 mm - Max. distance spindle – base plate: 350 – 1650 mm - Vertical travel of the arm: 1250 mm - Spindle speeds, stepless: 30 – 1500 rpm Nwsdpfx Adox Ei D Ao Ssh - Feeds, stepless: 1 – 600 mm/rev - Drive: 400 V / 8.9 kVA - 2 x cube tables - Coolant system - Required floor space approx.: W 2490 x H 2980 x D 1060 mm - Weight approx.: 3800 kg

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: N07/09, !!! SALE TO THE HIGHEST BIDDER !!! MBO Folding Machine T500-1-500/4F – 4 Buckle Plates – Industrial Folding Machine For sale is a folding machine manufactured by MBO Group, model T500-1-500/4F. This machine is ideally suited for print shops, lettershops, and finishing operations for the folding of brochures, leaflets, inserts, and other printed products. The robust construction of MBO folding machines ensures precise folding results, high reliability, and durable industrial quality. The buckle plate system enables a wide range of fold types to be carried out quickly and efficiently. Technical Data Manufacturer: MBO Group Model: T500-1-500/4F Machine Number: N07/09 Wiring Diagram: 35.1901.14 Folding System: Buckle Plate Folding Machine Number of Buckle Plates: 4 Max. Working Width: approx. 500 mm Application Area: Folding of printed products Nwsdpfxeyuc Rye Ad Soh Possible Applications Brochures Flyers Inserts Folders Multi-page printed materials Condition Used, condition appropriate to age. Inspection Inspection of the machine possible by appointment. Further information available upon request.

Year of construction: 1997, operating hours: 54,646 h, condition: used, Traub TNA500 Serial No. 253 Spindle speed: 2800 rpm 12-position tool turret Equipped with driven tools Nedpeyt Slwjfx Ad Sswh Power: 46 kVA

Condition: used, functionality: limited functionality, machine/vehicle number: 366507 16290, Year of construction: 1990, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, mast type: duplex, DGUV certified until: 12/2026, fork length: 1,200 mm, Equipment: sideshift, For sale is a Wagner reach truck, year of manufacture 1990. The forklift was fully operational until four weeks ago. The drive motor for steering and the sideshift (hydraulic cylinder) are defective. Load wheels are as new. Njdpfsytr Dyjx Ad Sowh

Condition: excellent (used), Year of construction: 2008, CNC Machining Centre WAGNER WMC 800 R 2008 Siemens 810 D Technical data: X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 510 mm Table height: 830 mm Max. tool length: 250 mm Tool diameter: 80 mm Nwodoyhdwnjpfx Ad Seh Clamping area: 800 x 450 mm Number of tool stations in magazine: 20 Spindle speed range: 8000 rpm

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm Njdjma Dkfspfx Ad Sswh max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 20,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: 38 mm particle board, P6 grade, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further versions available. Nedpfx Adexpic Rs Sjwh Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal struts instead of bracing crosses, at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. The additional costs depend on the place of delivery and shipping volume and can be quoted individually on request. TERMS OF PAYMENT Terms of payment must be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us if you have any questions. 'Vier gewinnt' – The four success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other configurations available] - Grid: 5,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: chipboard 38 mm P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new The mezzanine platforms can be extended within the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Support columns - Main and secondary beams - Cross bracing - Flooring - Fixing materials Price examples: 25 m² | Area: 5,000 x 5,000 mm | €2,445.00 net, plus transport and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,335.00 net, plus transport and VAT 75 m² | Area: 5,000 x 15,000 mm | €6,170.00 net, plus transport and VAT 100 m² | Area: 5,000 x 20,000 mm | €8,035.00 net, plus transport and VAT Nwjdpsxpii Rofx Ad Seh 100 m² | Area: 10,000 x 10,000 mm | €7,945.00 net, plus transport and VAT 150 m² | Area: 10,000 x 15,000 mm | €11,415.00 net, plus transport and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,985.00 net, plus transport and VAT 300 m² | Area: 20,000 x 15,000 mm | €21,425.00 net, plus transport and VAT 400 m² | Area: 20,000 x 15,000 mm | €28,155.00 net, plus transport and VAT 500 m² | Area: 20,000 x 25,000 mm | €33,935.00 net, plus transport and VAT Other configurations available Optional accessories: - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing (at extra cost) YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. Our planning department will prepare a customized, non-binding offer based on your specifications. Whether a new build, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the product. This item is available for collection. Delivery or shipping is available at additional cost. Extra charges depend on the delivery location and shipment size and can be quoted individually. PAYMENT TERMS Payment terms to be agreed upon when ordering. The price is quoted per unit/net price or as stated in the description text (plus VAT). You will of course receive an invoice indicating VAT. ✅ Four wins – The DLK success factors – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other versions available] - Grid spacing: 4,000 x 5,000 mm - Finished floor level: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: 38 mm particle board P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Cross bracing - Flooring - Fastening material EXAMPLE PRICES: 20 m² | Area: 4,000 x 5,000 mm | €2,135.00 net, plus transport costs and VAT 40 m² | Area: 4,000 x 10,000 mm | €3,825.00 net, plus transport costs and VAT 60 m² | Area: 4,000 x 15,000 mm | €5,435.00 net, plus transport costs and VAT 80 m² | Area: 4,000 x 20,000 mm | €7,215.00 net, plus transport costs and VAT 40 m² | Area: 8,000 x 5,000 mm | €3,725.00 net, plus transport costs and VAT 80 m² | Area: 8,000 x 10,000 mm | €6,519.00 net, plus transport costs and VAT 120 m² | Area: 8,000 x 15,000 mm | €9,695.00 net, plus transport costs and VAT 160 m² | Area: 8,000 x 20,000 mm | €12,755.00 net, plus transport costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,995.00 net, plus transport costs and VAT 80 m² | Area: 16,000 x 5,000 mm | €6,785.00 net, plus transport costs and VAT 160 m² | Area: 16,000 x 10,000 mm | €12,472.00 net, plus transport costs and VAT 240 m² | Area: 16,000 x 15,000 mm | €18,108.00 net, plus transport costs and VAT 320 m² | Area: 16,000 x 20,000 mm | €23,565.00 net, plus transport costs and VAT Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact guard - Diagonal supports instead of cross bracing available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ TAILOR-MADE DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended field of use. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at extra cost. Additional charges depend on the place of delivery and consignment scope, and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The price is quoted as a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveying technology, mezzanines, textile storage, as well as machines for trade, industry, and crafts. Nedpfx Aexpha Isd Sewh ✅ Four winning pillars – The building blocks for DLK's success – Storage technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 90,000 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table length: 4,000 mm, table width: 2,600 mm, TECHNICAL DETAILS Travel distance X-axis: 2,600 mm Travel distance Y-axis: 4,000 mm Table length: 4,000 mm Table width: 2,600 mm Maximum glass weight: 260 kg Glass thickness: 4 - 10 mm MACHINE DETAILS Nwodpfx Adoyk S Uye Sjh Cycle time: 10 pieces/hour Cabin type: SUP-E2-D107/20000 + "D" Total production line length: 90 m Installed power: 1,100 kW EQUIPMENT Loading station with lifter Vertical inlet conveyor WM Vertical washing machine with dryer Vertical inspection conveyor with activation section Tilting table with horizontal transport and vertical inspection Pre-heating section Powder section with belt cleaning Cleaning conveyor Cooling section Tilting table with vertical and horizontal transport Vertical inspection station Unloading station Electrical distribution Deionized water system for the washing machine supply The ovens that may be visible in the pictures are not included in the scope of sale and delivery.

Year of construction: 1989, condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm Nwedowhqz Uepfx Ad Soh no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC dimensions ca. 3000 x 2500 x 2500 mm

Year of construction: 2021, operating hours: 1,150 h, condition: used, functionality: fully functional, machine/vehicle number: 596091, Wagner NE metal separator 0428/0-18/90/12 G2 RX with residual iron separator neodymium magnetic drum 0421N-30/85-02 and Siemens S7-1200 control, without steel framework, working width: 900 mm ✔ High separation efficiency thanks to an eccentric eddy current system Nwjdjyiur Sjpfx Ad Soh ✔ Effective combination of NE separation and residual iron separation ✔ Precisely adjustable belt speed ✔ Robust industrial design ✔ Modern Siemens PLC control with touch panel ✔ Ideal for continuous recycling processes

Condition: used, Year of construction: 2009, CNC Machining Center Wagner-Eumach, Model EBM 3200, year of manufacture 2009 for sale. Condition: Fully operational Travel X-axis: 3,200 mm Travel Y-axis: 1,100 mm Travel Z-axis: 900 mm CNC control manufacturer: Sinumerik CNC control model: Sinumerik 810D Shopmill Total weight: 25,000 kg Overall length: 7,800 mm Overall width: 4,700 mm Maximum workpiece weight: 5,000 kg Feed travel X-axis: 3,200 mm Feed travel Y-axis: 1,100 mm Feed travel Z-axis: 900 mm Spindle motor power: 45,000 W Rated apparent power: 45 kVA Max. spindle speed: 6,000 rpm Min. spindle speed: 6,000 rpm Table length: 3,250 mm Table height: 1,030 mm Table load: 5,000 kg Table width: 1,220 mm Maximum tool diameter: 125 mm Maximum tool length: 300 mm Maximum tool weight: 15,000 g Spindle operating hours: 18,000 h Equipment: Nsdpfx Adjw D Slts Sjwh Chip conveyor, NC rotary table (table size 800 x 800 mm), tool holder SK 50, through-spindle coolant (IKZ) Inspection possible by appointment.

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Nwedottv Uaspfx Ad Ssh

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Nwedpfx Adoyarq Te Seh