Used Vollmer Adn/V for sale (34,242)

Condition: used, Year of construction: 1997, Suitable for automatic, double-sided tooth flank grinding on carbide-tipped circular saw blades. Accessories: Total enclosure. Coolant System, Automatic central lubrication, Expansion of diameter range from 80 – 1,430 mm!! Circular sawblade outer diameter: 80 to 1430 mm Circular sawblade bore diameter: 10 - 220 mm sheet thickness: up to 14 mm rake angle: -15° to +40° Radial free angle: -6° to 6° Tangential free angle: up to +8° Grinding path: Max. 30 mm Grinding speed: 0.5 - 20 mm/s Tooth pitch: 6 - 120 mm Grinding wheel diameter: 80 to 125 mm Grinding wheel bore diameter: 32 mm Connected load approx.: 3,6 kW (400 V / 50 Hz) Itodpfx Aaoy Urwdj Eei Dimensions W x D x H approx.: 2395 x 1590 x 1970 mm colour: green/grey Weight approx: 1750 kg

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent auxiliary drive MB 1.65, flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the frame * Transmission lock NMV * Dual-plate clutch * Drivetrain for 44-120 tons * Transmission oil cooler * Transfer gearbox VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rearview camera * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to General Terms and Conditions (AGB), 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Front axle load 9.0 t * Additional parking brake (spring brake) on 2nd front axle * Exhaust muffler, vertical, located behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air tank, aluminum * Electrical pre-wiring in the cab, 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield, tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter * Transmission, 16-speed - Type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, right side * Cooling capacity for hot climates * Air filter: cyclonic air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, transmission-independent and clutch-dependent, MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Reversing warning, audible and flashing warning lights (external warning signal) * Additional key with remote control (2) * Fleet management system interface * Headlight grille * External sun visor * Stabilizer on 2nd rear axle, reinforced * Steel wheels 11.75x22.5 (on the front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for additional headlights * Seat belt warning device * Dual-plate clutch * Additional equipment: Exhaust standard EURO 6e * ABS can be deactivated * Axle configuration: 8x8/4, permanent all-wheel drive * Exterior/front mirrors, heated * Trailer coupling: towing coupling Ringfeder * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above the 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit, multimedia * Front axle differential lock * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic headlight activation (light sensor) * Cab: Flexible cab entry step * Cab: Hydraulic tilting mechanism Itedpfx Aezch Nqja Eoi * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: spring-mounted, standard * Suspension: leaf/leaf * Suspension: rear springs 2x15.0 t * Power windows * Urea tank (AdBlue): 25 liters * Manual roof hatch (steel) * Body/superstructure: chassis for dump truck * Comfort locking system * Steering pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Heated air dryer * Engine, 12.8 L - 375 kW R6 diesel (OM 471) * Engine variant, OM 471 * Auxiliary drive MB 131-2c * Type of use: short-distance transport * Wheelbase variant 4850 mm * Ramp mirrors * Residual heat recovery syst

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent auxiliary drive MB 1.65, drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the chassis * Transmission lock NMV * Dual-plate clutch * Drivetrain for 44-120 tons * Transmission oil cooler * Transfer case VG2800-3W/1.45-1.04, permanent * Power Shift 3, Advanced gear shifting system * Offroad driving program * Rear-view camera Itjdpfezch Nkjx Aa Esi * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to the general terms and conditions, 4 years / 340,000 km * Wheelbase 4850 mm * Chassis overhang 2500 mm * Axle load, front axle 9.0 t, * Additional parking brake on 2nd front axle * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air reservoir, aluminum * Electrical pre-wiring in the cab, 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter * Transmission 16-speed - Type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, on the right * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, transmission-independent and clutch-dependent MB 1.65 * Parameterizable special module * Chassis overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Reversing warning, acoustic and hazard warning lights (warning signal outside) * Additional key with remote control (2) * Interface for fleet management system * Headlight protection grille * Sun visor, exterior * Stabilizer bar on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for auxiliary headlights * Seat belt warning system * Dual-plate clutch * Other equipment: Emission standard EURO 6e * ABS can be switched off * Axle configuration: 8x8/4, permanent all-wheel drive * Exterior/front mirrors, heated * Trailer coupling: drawbar coupling Ringfeder * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit multimedia * Differential lock, front axle * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic activation for headlights (light sensor) * Cab: cab entrance, adjustable * Cab: tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: steel-sprung, standard * Suspension: leaf / leaf * Suspension: rear springs 2x15.0 t * Power windows * AdBlue tank: 25 liters * Manual lift roof (steel) * Body/superstructure: chassis for dump truck * Comfort locking system * Steering pump, unregulated * Steering wheel with multifunction buttons * Power steering cooler * Air intake behind the cab * Air compressor, 2-cylinder * Air dryer, heated * Engine 12.8 liters - 375 kW, R6 Diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Type of use: local transport * Wheelbase version 4850 mm * Ramp mirrors * Waste h

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Registration possible until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent auxiliary drive MB 1.65, drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump below the upper edge of the frame * Transmission lock NMV * Twin-disc clutch * Drivetrain 44-120 t * Transmission oil cooler * Transfer gearbox VG2800-3W/1.45-1.04, permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rear view camera * Lane keeping assist * Attention assist * Traffic sign assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to general terms and conditions, 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle 9.0 t * Additional parking brake on 2nd front axle * Exhaust silencer, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air tank, aluminum * Electrical pre-wiring in the cab, 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without rear underrun protection * Speed limiter * Transmission: 16-speed, type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 t Itodpszch Ndjfx Aa Eoi * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, right * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, transmission-independent and clutch-dependent MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure control system * Reversing warning, acoustic and hazard warning lights (external warning signal) * Additional key with remote control (2) * Fleet management system interface * Headlight protective grille * External sun visor * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for additional headlights * Seatbelt warning device * Twin-disc clutch * Other equipment: Emission standard EURO 6e * ABS can be deactivated * Axle configuration: 8x8/4, permanent all-wheel drive * Approach/front mirrors, heated * Trailer coupling: Ringfeder towing hitch * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above the 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit multimedia * Front axle differential lock * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switching for headlights (light sensor) * Cab: Movable cab entry step * Cab: Hydraulic tilting mechanism * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: steel-sprung, standard * Suspension: leaf spring / leaf spring * Suspension: rear springs 2x15.0 t * Power windows * Urea tank (AdBlue): 25 liters * Manual lift roof (steel) * Body/superstructure: Chassis for dump truck * Comfort locking system * Steering power pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Heated air dryer * Engine 12.8 liters - 375 kW R6 Diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Intended use: local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat recovery * Key

Year of construction: 1971, condition: good (used), CV circular saw sharpening machine, type Vollmer CNH, with tooth profile adjustment (for pointed, arched, and wolf-tooth shapes) and tooth pitch adjustment. Ijdpfx Ajggbh Dja Ejti Delivery can also include a dividing head upon request. Functional video available upon request.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, Professional BELIMED MST-V 6-6-12 VS2 steam sterilizer from an ongoing food production facility for sale. Iedpfezccqisx Aa Ejti The unit was originally developed for medical applications and is now successfully used for sterilizing beverage bottles in a smoothie production facility. Up to 350 bottles are sterilized per batch on specially adapted trolleys. The autoclave features a modern Siemens control system with a touchscreen, programmable sterilization cycles, and stored programs for sterilizations above 121 °C. Programs are programmable, and the display language can be selected. A recent test report from an independent food institute with FDA-compliant temperature penetration measurement in the product is particularly noteworthy. The unit is in very good technical condition. In recent years, the sterilization door, pumps, and motors have been replaced. The autoclave is currently in daily use and can be inspected under real production conditions until August 2026. Further details: Pass-through design with door at the front and rear Siemens control system with color touchscreen Display currently set to Polish; other languages possible Programmable sterilization cycles Stored programs > 121 °C FDA-compliant temperature penetration measurement available Test report from an independent food institute available New sterilization door Pumps replaced Motors replaced Regularly maintained 1 transport trolley included Additional transport trolleys available Currently used in a food production facility Inspection possible during ongoing operation Available from September 1, 2026 Location: 58-508 Siedlęcin, Poland Price: €39,900 (negotiable)

Year of construction: 2002, condition: good (used), Vollmer CA 200 Itodpfxjfbgvdj Aa Eoi

Condition: excellent (used), flowmeter Endress-Hauser Pulsmag V + Variomag measuring range:0,0420 m3/sec Power 0 - 20 mA Temperature max. 80 °C lining material: HG Connections DN 150 /PN16 Voltage 220 V measuring range Frequency 50 Hz Length 220 mm Width 260 mm Height 350 mm Weight 13 kg Ijdpfsfcb Nbox Aa Ejti

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg Itedpoic Rl Dofx Aa Eei The hydraulic unit is functional, the drive motor is in the removed state.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Itsdpfopcf Etex Aa Esi Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring • Weight: approx. 62 kg Equipment included: • SHINI robot • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Applications: • Injection molding machines Itodpfxjy Duzqs Aa Esi • Production automation • Part removal • Pick & place operations

Year of construction: 2026, condition: new, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, 1 short dressing holder, 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Iedpfxsy T It Ej Aa Eeti Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° X axis travel: 280 mm Z-axis travel: 330 mm workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: ready for operation (used), Year of construction: 1952, functionality: fully functional, machine/vehicle number: Typ Cre, Saw blade sharpening machine – straight grinding – for circular saw blades with a diameter of 80 to 800 mm. A clamping device for band saw blades is available. The operating manual is also included. The machine is in working order and can be demonstrated. Itsdpfx Aeza Tl Sea Eei

Condition: new, Year of construction: 2021, functionality: fully functional, V-motion classic vacuum lifting device with slewing jibLoad capacity: 250 kg Overall height: 3.8 m Lower edge of jib: approx. 3 m Reach / Outreach: 4 m Slewing range: 250° Suitable for horizontal and vertical material handling. Excellent for commercially available flat sheets and panels (MDF from 8 mm thickness). A pneumatic tilting device supports the operation of the unit. The tilting range is within 90°. The vacuum is generated by an ejector using pneumatics. Details: - Lifting speed: chain hoist, 0–10 m/min Itodpey R D Hiefx Aa Eoi - Lifting height: 2 m - Chain length: 3.5 m - Operating pressure: 7 bar (filtered compressed air required) - Air consumption: 11 Nl/s

Condition: excellent (used), Year of construction: 1997, Vollmer CAL 300 Itsdpfoy Ryg Eex Aa Eji

Condition: refurbished (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, Hollow-chest grinding unit, completely overhauled. Can be used with all CHP, CHC, and CX machines. Itjdpfsy Uabdox Aa Eoi Available for immediate delivery.

Condition: used, Automatic sharpening machine Vollmer, model CHC 21 H; minimum and maximum width of bandsaws: 65–200 mm, tooth pitch: 12–80 mm, minimum tooth height: 5 mm, set per side from 0.3 to 1.5 mm, power: 0.55 kW, estimated machine weight: 550 kg, year: 1981, serial no. 364 Itodpfoy Swluex Aa Esi

Condition: used, Year of construction: 1978, functionality: fully functional, VOLLMER CANA-E and VOLLMER FSM sharpening machines: 1- CANA-E 1978 €4,200 3- CANA-E 1961 €3,200 4- CANA-E 1970 €3,200 Isdpfxowgb Uvj Aa Esti 6- CANA-E 1965 €3,200 7- FSM 1970 €2,500 8- FSM 1962 €2,200

Condition: used, functionality: fully functional, 1. CNE 1965 €1,300 Itjdpfx Aswb Smlja Eei 2. CNE 1970 €1,400 3. CNE 1970 €1,400 4. CNG 1970 €1,100 5. CNS 1957 €800 6. CNL 1970 €800 7. CNG 1972 €1,100 8. CNE 1968 €1,400 9. CNS 1975 €1,600 10. CNE 1966 €1,300 11. CMS 1959 €800 12. CNS 1955 €800 13. CNE 1969 €1,400 14. CNE 1968 €1,400 15. CNH 1970 €2,400

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Itsdpswtmg Djfx Aa Esi Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Year of construction: 2025, condition: used, Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 Ijdpswl Agqefx Aa Eeti

Year of construction: 2025, condition: used, HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400) Iodpfx Ajwl Alaja Eeti

Condition: used, Year of construction: 2002, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Tailstock. Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Itsdsylby Ijpfx Aa Eji Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Itedpfx Aew S I Dgja Eji Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: used, Year of construction: 2001, Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure, Mist extractor Probe, Machine lamp, Iedpfx Aoyzm Iwea Ejti Automatic central lubrication, Coolant system dielectric fluid Fire extinguishing system Measuring mandrel Alphanumeric keyboard cutter outer diameter max: 250 mm cutting length max.: 200 mm shank tool diameter: 10 - 250 mm cutting length: 200 mm Outside diameter of disc-shaped tools max.: 250 mm tool weight max.: 20 kg X-axis travel: 220 mm Y-axis travel: 300 mm W axis travel: 200 mm A-axis rotation range: 60 ° A-axis taper: ISO 40 E-axis swivel range: 120 ° number of revolutions: 80 - 2000 rpm. Dimensions L x W x H: 2235x2630x2130mm mass: approx. 4500 kg Connected load approx.: 400V / 50Hz / 4.5KW colour: turquoise RAL 5021/grey RAL 9002