Used Stankoimport 3 E 711 B 11 for sale (109,666)

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Guodpfevtp Uxsx Ak Usg Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Length: 12 m Materiel Thickness: Cut up to 40 mm

Condition: new, Year of construction: 2023, grinding wheel size 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M3 EW20° 4GG from the company 3M Gedpfx Akjuayn Rj Ueug Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Year of construction: 2017, condition: used, Used overhead crane system with vacuum lifting device Year of manufacture: 2017 Load capacity: 250 kg (at the lifting device) Crane travel: 6 m Bridge: 6 m Vacuum lifting device B 3 UW H K 250 V with 2 oval suction cups 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely variable Operation via special handle on the vacuum lifting device. Gjdpfx Akezc Agds Uoug The lifting movement is controlled infinitely variable via a frequency converter. Availability: short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2008, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2008 WELFIT ODDY 20FT ISO tank container 24,890L / 1-compartment with 3 baffles (partial loading possible) / 4 lids UN PORTABLE, T12 steam heating bottom discharge Payload: 32,200kg Design temperature: -40/+130 degrees SANS 50028-7: 1.4402 valid for 5 years + CSC inspection until 11-2028 = Further information = Gujdpfx Akszxzy Ho Uog General information Year of manufacture: April 2008 Model year: 2008 Usable material: Chemicals Weights Empty weight: 3,800 kg Payload: 32,200 kg GVW: 36,000 kg Functional Load compartment volume: 25,000 l Body brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.

Condition: new, Year of construction: 2023, grinding wheel size 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M3 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Guodpfxjuayn Do Ak Ujg Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: good (used), Year of construction: 1975, machine/vehicle number: 16344, Offer 25511 Technical data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling performance in steel ST 60: 32 mm - Thread cutting device - Drill spindle mount: MK 3 long spindle - Drill spindle stroke: 180 mm - 10 spindle speeds: 250 – 2100 rpm - Throat approx.: 290 mm - Max. distance table – spindle approx.: 620 mm - Table with 2 T-slots, height adjustable: 520 x 450 mm - Drive: 400 V / 1.0 / 1.3 kW Gedpoy Rz Dfefx Ak Uoug - Required space approx.: W 600 x H 1850 x D 700 mm - Weight approx.: 280 kg

Condition: good (used), Year of construction: 2019, Reflective light barrier, reflective light sensor, reflective sensor, light sensor, fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, contrast sensor, contrast sensor, sensor reflective light sensor, light sensor -Manufacturer: Sick, Array sensor contrast switch -Type: AS30-EBM314I110ZZZ -Voltage: DC 18...30V -Number: 3 sensors available -Price: per piece Gsdpfx Aex Thd Rsk Ueug -Dimensions: 80/50/30 mm / 65/30/60 mm -Weight: 0.2 kg/pc.

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF RA 110 3+3 E 6 CATERPILLAR Godop Analopfx Ak Usug Year of construction: 2003 Caterpillars: 6 Diameter: Min 20mm Max 170mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: used, Year of construction: 1983, machine/vehicle number: 18071, Ref. No. 25393 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm - Drill spindle taper: MT 3 Gujdpfsy En I Hjx Ak Usg - Drill spindle stroke: 180 mm - Drill spindle speeds steplessly adjustable: - Range 1: 130 – 480 rpm - Range 2: 480 – 1750 rpm - 3 feeds: 0.1; 0.2; 0.3 mm/rev - Throat depth: 290 mm - Maximum distance table - drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Height adjustable by rack-and-pinion and handwheel - Separate coolant unit - Drive: 400 V / 0.9 / 1.3 kW - Space requirement approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 22,038 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,055 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 Mast type: Triplex Gujdpfx Aew Sztuok Uog Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery capacity: 500Ah Battery year: 2021 Description: Sideshift, 3rd valve,

Condition: used, Year of construction: 1994, machine/vehicle number: 884019, functionality: fully functional, power: 15 kW (20.39 HP), total length: 3,600 mm, total width: 2,300 mm, total height: 2,800 mm, overall weight: 8,800 kg, TRUMPF Trumabend 125/3 Year of manufacture: 1994 Control: CNC (DA58) Country of origin: Austria Press force 125 t Bending length 3050 mm Frame gap 2550 mm Total power requirement 15 kW Throat depth 350 mm Approach speed 130 mm/sec Working speed 1–10 m/min Return speed 100 mm/sec Backgauge – adjustable 1000 mm Stroke 200 mm Installation height Gujdpjy Iydlefx Ak Usg 400 mm Press capacity 280 bar Space requirement approx. 3.6 x 2.3 x 2.8 m Machine weight approx. 8.8 t Control CNC Control system DA58

Year of construction: 1994, condition: used, functionality: fully functional, Perfectly functioning EDM machine AGIE-ELOX MONDO 1/35A Godeygq D Espfx Ak Uoug

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm Gusdpjxabzyjfx Ak Ueg capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: used, Year of construction: 1988, Technical details: table diameter: 500 mm table height: 150 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 110 kg dimensions: 800 x 800 x 180 mm Guedpfeu N D I Ajx Ak Ueg Rotary table operation by handwheel Operation Coupling connection Ø 20 x 32mm Foot mounting: 2x clamping groove Ø 19 x29mm Equipment: 8-sided top plate, size 665mmx23mm, 3x through-holes Ø 30mm in the centre Accessories: 4x eyebolts *

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE Co-extruder MEB 38/2 - Motor: 5.2 kW / Max. screw speed: 42 rpm - Screw diameter: 38 mm - Screw length: 25D - Smooth, single-piece barrel - 4 barrel heating zones - 1 flange heating zone - 1 die heating zone - KS 40 controller - 3-zone screw - Die connection: IDE M48x2 - Melt pressure and melt temperature measurement - Height-adjustable - Tilt-adjustable Godpfxjzmnp Ro Ak Uoug - Barrel and screw in very good condition - First-hand ownership, very well maintained, only 811 operating hours, used only in a technical center.

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Guedozwlw Tjpfx Ak Usg Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety Gusdpfezx E N Sex Ak Usg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,148 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 650 mm, spindle motor power: 37,000 W, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, positioning accuracy: 0.008 mm, tool weight: 20,000 g, number of slots in tool magazine: 48, number of axes: 5, This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details. Technical Data • Machine Type: Twin-Spindle Horizontal Machining Center • Control Unit: Siemens SINUMERIK 840D sl • Operator Panel: Siemens OP15T with integrated TCU • ECO Mode • Remote Diagnostics (eWON Router) • PROFIBUS Interface for Automatic Workpiece Loading • Signal Tower (3-color LED) Travels • X-Axis Travel: 750 mm • Y-Axis Travel: 660 mm • Z1-Axis Travel: 650 mm • Z2-Axis Travel: 650 mm Rapid Traverse • X-Axis: 60 m/min • Y-Axis: 60 m/min • Z1/Z2 Axes: 90 m/min Axis Performance • X-Axis Acceleration: 6 m/s² • Y-Axis Acceleration: 6 m/s² • Z1/Z2 Axis Acceleration: 9 m/s² • Feed Force X: 15,000 N • Feed Force Y: 15,000 N • Feed Force Z1/Z2: 10,000 N • Positioning Accuracy: 8 µm Spindle • Number of Spindles: 2 • Precision Motor Spindles • Tool Holder: HSK-A63 (DIN 69893-1) • Spindle Speed: 12,000 rpm • Spindle Power: 37 kW (40% ED) • Spindle Torque: 85 Nm (40% ED) • Maximum Torque: 100 Nm • Direct Drive Axes / Swivel System • 2 NC B-Axes • 2 NC Rotary Axes (A-Axes) • Swivel Range: 0°–180° • Swivel Time (0°–180°): approx. 5 s Technology • Independent X, Y and Z Axes for both Spindles • Separate Direct Measuring System for each Axis • Independent Z-Axis Correction Range: 5 mm Tool Magazine • 96 Tool Stations (2 × 48) • Maximum Tool Length: 400 mm • Maximum Tool Diameter (Adjacent Pockets Occupied): 80 mm • Maximum Tool Diameter (Adjacent Pockets Free): 250 mm • Maximum Tool Weight: 20 kg Lubrication • Automatic Central Lubrication • 5-Channel Media Transfer (Oil or Air) Cooling / Coolant Gjdpfszqr Sksx Ak Ueug • 70 bar Through-Spindle Coolant • Coolant Tank Capacity: 2,300 l • Coolant Flow Rate: 400 l/min • High-Pressure Pump: 15 kW • Automatic Coolant Refill • Coolant Cleaning System • Water Cooling • Cooling Water Temperature: 22 °C • Cooling Water Flow Rate: 800 l/h Chip Management • Scraper-Type Chip Conveyor • Chip Conveyor Discharge Height: < 1,150 mm • Dry Machining Ready • MMS (Minimum Quantity Lubrication) Compatible Electrical Data • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V DC • Connected Load: 150 kW Additional Features • Automatic Workpiece Loading Interface • Automatic Tool Changer • Closed Machine Enclosure • Machine Lighting • Pneumatic Equipment • Energy Monitoring System • Automatic Media Connections • Modular Machine Design Additional Information • Motor Spindle 11 replaced in Week 19/2024 • Motor Spindle 12 replaced in Week 24/2023 Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2008, bar length: 3,200 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Bar change time 27 sec. Feed rate 150 mm/sec. adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Gusdpfx Akow Rfiwe Ujg Weight 900 kg

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Gedpfx Aezcyqmjk Ujug

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Gjdpfx Akoug Edke Ujug Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 347 kg, torque: 8,000 Nm, SEW Eurodrive KH107/T DRN132S4/BE11HR/ASE1/TF Manufacturer: SEW Eurodrive Type: KH107/T DRN132S4/BE11HR/ASE1/TF Serial Number: 01.8125801502.0001.22 Technical Data Speed [rpm] 1461 / 12 Total gear ratio [i] 121.46 Max. torque [Nm] 8,000 Output torque [Nm] 4370 SEW service factor 1.85 Mounting position IM M4B ISO designation CLP 220 Lubricant type Mineral oil Lubricant quantity [l] 31.50 Godpfszrbgmjx Ak Ujug Motor power [kW] 5.5 Motor frequency [Hz] 50 Duty cycle S1-S10 S1 Motor voltage [V] / Switching method 230/400 Delta/Star Rated current [A] 18.20 / 10.50 cos phi 0.84 Thermal class [°C]/Protection class [IP] 155(F) / 54 International efficiency class IE3 Efficiency (100% Pn) [%] 89.6 Efficiency at 50/75/100% Pn [%] 90.6 / 90.6 / 89.6 Ambient temperature min. [°C] -20 Ambient temperature max. [°C] 40 Brake voltage [V] / Brake torque [Nm] 400 AC / 80 Brake rectifier TS BGE1.5 Nameplate: German Weight 347.00 kg SEW Eurodrive gear motors – various types immediately available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideal for use in machinery and plant engineering, in conveyor technology, and for numerous industrial applications. Available types 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor speed: 1,461 / 12 rpm Total gear ratio: i = 121.46 Max. permissible torque (Ma max): 8,000 Nm Output torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Incl. decentralized inverter: DFC20A-0055-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 33 – 1.6 rpm Total gear ratio: i = 88.97 Max. permissible torque (Ma max): 1,550 Nm Output torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total gear ratio: i = 57.28 Max. permissible torque (Ma max): 820 Nm Output torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total gear ratio: i = 108.29 Max. permissible torque (Ma max): 600 Nm Output torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Incl. decentralized inverter: DFC20A-0020-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 30 – 1.5 rpm Total gear ratio: i = 97.81 Max. permissible torque (Ma max): 200 Nm Output torque: 177 Nm General information Manufacturer: SEW-EURODRIVE Robust industrial quality Various power and torque ranges available Some with integrated decentralized frequency converter (DFC) Ideal as a replacement drive or for new projects If you are interested, we will gladly send you further information, photos or the nameplates of the individual drives. An inspection can also be arranged upon request.

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201 Gedezz Rw Hspfx Ak Ueug

Condition: good (used), FLOTT E-3 pillar drill throat 260 mm Bore 125 mm stroke Godpfx Akjric Tbe Usug Speed: 125 -2500 Clamping table diameter 420x340 mm Column diameter 110 mm Tool holder MK3

Year of construction: 2020, condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-foot remote control Height: approx. min. 700 mm horizontally, max. 1400 mm Diameter of turntable: 1400 mm Tilting angle: min. 135° Speed: 0.05 to 0.6 RPM Motor power: 3 kW Gusdpfxef Ezc Aj Ak Uog